esp-idf/components/bt/bluedroid/stack/rfcomm/include/port_int.h
2018-01-05 16:48:29 +08:00

248 lines
9.4 KiB
C

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*****************************************************************************
*
* This file contains definitions internal to the PORT unit
*
*****************************************************************************/
#ifndef PORT_INT_H
#define PORT_INT_H
#include "bt_target.h"
#include "rfcdefs.h"
#include "port_api.h"
#include "fixed_queue.h"
#include "bt_defs.h"
/* Local events passed when application event is sent from the api to PORT */
/* ???*/
#define PORT_EVENT_OPEN (1 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_CONTROL (2 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SET_STATE (3 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SET_CALLBACK (5 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_WRITE (6 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_PURGE (7 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SEND_ERROR (8 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_FLOW_CONTROL (9 | BT_EVT_TO_BTU_SP_EVT)
/*
** Flow control configuration values for the mux
*/
#define PORT_FC_UNDEFINED 0 /* mux flow control mechanism not defined yet */
#define PORT_FC_TS710 1 /* use TS 07.10 flow control */
#define PORT_FC_CREDIT 2 /* use RFCOMM credit based flow control */
/*
** Define Port Data Transfere control block
*/
typedef struct {
fixed_queue_t *queue; /* Queue of buffers waiting to be sent */
BOOLEAN peer_fc; /* TRUE if flow control is set based on peer's request */
BOOLEAN user_fc; /* TRUE if flow control is set based on user's request */
UINT32 queue_size; /* Number of data bytes in the queue */
tPORT_CALLBACK *p_callback; /* Address of the callback function */
} tPORT_DATA;
/*
** Port control structure used to pass modem info
*/
typedef struct {
#define MODEM_SIGNAL_DTRDSR 0x01
#define MODEM_SIGNAL_RTSCTS 0x02
#define MODEM_SIGNAL_RI 0x04
#define MODEM_SIGNAL_DCD 0x08
UINT8 modem_signal; /* [DTR/DSR | RTS/CTS | RI | DCD ] */
UINT8 break_signal; /* 0-3 s in steps of 200 ms */
UINT8 discard_buffers; /* 0 - do not discard, 1 - discard */
#define RFCOMM_CTRL_BREAK_ASAP 0
#define RFCOMM_CTRL_BREAK_IN_SEQ 1
UINT8 break_signal_seq; /* as soon as possible | in sequence (default) */
BOOLEAN fc; /* TRUE when the device is unable to accept frames */
} tPORT_CTRL;
/*
** RFCOMM multiplexer Control Block
*/
typedef struct {
TIMER_LIST_ENT tle; /* Timer list entry */
fixed_queue_t *cmd_q; /* Queue for command messages on this mux */
UINT8 port_inx[RFCOMM_MAX_DLCI + 1]; /* Array for quick access to */
/* tPORT based on dlci */
BD_ADDR bd_addr; /* BD ADDR of the peer if initiator */
UINT16 lcid; /* Local cid used for this channel */
UINT16 peer_l2cap_mtu; /* Max frame that can be sent to peer L2CAP */
UINT8 state; /* Current multiplexer channel state */
UINT8 is_initiator; /* TRUE if this side sends SABME (dlci=0) */
BOOLEAN local_cfg_sent;
BOOLEAN peer_cfg_rcvd;
BOOLEAN restart_required; /* TRUE if has to restart channel after disc */
BOOLEAN peer_ready; /* True if other side can accept frames */
UINT8 flow; /* flow control mechanism for this mux */
BOOLEAN l2cap_congested; /* TRUE if L2CAP is congested */
BOOLEAN is_disc_initiator; /* TRUE if initiated disc of port */
UINT16 pending_lcid; /* store LCID for incoming connection while connecting */
UINT8 pending_id; /* store l2cap ID for incoming connection while connecting */
} tRFC_MCB;
/*
** RFCOMM Port Connection Control Block
*/
struct t_rfc_port {
#define RFC_PORT_STATE_IDLE 0
#define RFC_PORT_STATE_WAIT_START 1
#define RFC_PORT_STATE_OPENING 2
#define RFC_PORT_STATE_OPENED 3
#define RFC_PORT_STATE_CLOSING 4
UINT8 state; /* Current state of the connection */
#define RFC_RSP_PN 0x01
#define RFC_RSP_RPN_REPLY 0x02
#define RFC_RSP_RPN 0x04
#define RFC_RSP_MSC 0x08
#define RFC_RSP_RLS 0x10
UINT8 expected_rsp;
tRFC_MCB *p_mcb;
TIMER_LIST_ENT tle; /* Timer list entry */
};
typedef struct t_rfc_port tRFC_PORT;
/*
** Define control block containing information about PORT connection
*/
struct t_port_info {
UINT8 inx; /* Index of this control block in the port_info array */
BOOLEAN in_use; /* True when structure is allocated */
#define PORT_STATE_CLOSED 0
#define PORT_STATE_OPENING 1
#define PORT_STATE_OPENED 2
#define PORT_STATE_CLOSING 3
UINT8 state; /* State of the application */
UINT8 scn; /* Service channel number */
UINT16 uuid; /* Service UUID */
BD_ADDR bd_addr; /* BD ADDR of the device for the multiplexer channel */
BOOLEAN is_server; /* TRUE if the server application */
UINT8 dlci; /* DLCI of the connection */
UINT8 error; /* Last error detected */
UINT8 line_status; /* Line status as reported by peer */
UINT8 default_signal_state; /* Initial signal state depending on uuid */
UINT16 mtu; /* Max MTU that port can receive */
UINT16 peer_mtu; /* Max MTU that port can send */
tPORT_DATA tx; /* Control block for data from app to peer */
tPORT_DATA rx; /* Control block for data from peer to app */
tPORT_STATE user_port_pars; /* Port parameters for user connection */
tPORT_STATE peer_port_pars; /* Port parameters for user connection */
tPORT_CTRL local_ctrl;
tPORT_CTRL peer_ctrl;
#define PORT_CTRL_REQ_SENT 0x01
#define PORT_CTRL_REQ_CONFIRMED 0x02
#define PORT_CTRL_IND_RECEIVED 0x04
#define PORT_CTRL_IND_RESPONDED 0x08
UINT8 port_ctrl; /* Modem Status Command */
BOOLEAN rx_flag_ev_pending; /* RXFLAG Character is received */
tRFC_PORT rfc; /* RFCOMM port control block */
UINT32 ev_mask; /* Event mask for the callback */
tPORT_CALLBACK *p_callback; /* Pointer to users callback function */
tPORT_CALLBACK *p_mgmt_callback; /* Callback function to receive connection up/down */
tPORT_DATA_CALLBACK *p_data_callback; /* Callback function to receive data indications */
tPORT_DATA_CO_CALLBACK *p_data_co_callback; /* Callback function with callouts and flowctrl */
UINT16 credit_tx; /* Flow control credits for tx path */
UINT16 credit_rx; /* Flow control credits for rx path, this is */
/* number of buffers peer is allowed to sent */
UINT16 credit_rx_max; /* Max number of credits we will allow this guy to sent */
UINT16 credit_rx_low; /* Number of credits when we send credit update */
UINT16 rx_buf_critical; /* port receive queue critical watermark level */
BOOLEAN keep_port_handle; /* TRUE if port is not deallocated when closing */
/* it is set to TRUE for server when allocating port */
UINT16 keep_mtu; /* Max MTU that port can receive by server */
};
typedef struct t_port_info tPORT;
/* Define the PORT/RFCOMM control structure
*/
typedef struct {
tPORT port[MAX_RFC_PORTS]; /* Port info pool */
tRFC_MCB rfc_mcb[MAX_BD_CONNECTIONS]; /* RFCOMM bd_connections pool */
} tPORT_CB;
#ifdef __cplusplus
extern "C" {
#endif
/*
** Functions provided by the port_utils.c
*/
extern tPORT *port_allocate_port (UINT8 dlci, BD_ADDR bd_addr);
extern void port_set_defaults (tPORT *p_port);
extern void port_select_mtu (tPORT *p_port);
extern void port_release_port (tPORT *p_port);
extern tPORT *port_find_mcb_dlci_port (tRFC_MCB *p_mcb, UINT8 dlci);
extern tRFC_MCB *port_find_mcb (BD_ADDR bd_addr);
extern tPORT *port_find_dlci_port (UINT8 dlci);
extern tPORT *port_find_port (UINT8 dlci, BD_ADDR bd_addr);
extern UINT32 port_get_signal_changes (tPORT *p_port, UINT8 old_signals, UINT8 signal);
extern UINT32 port_flow_control_user (tPORT *p_port);
extern void port_flow_control_peer(tPORT *p_port, BOOLEAN enable, UINT16 count);
/*
** Functions provided by the port_rfc.c
*/
extern int port_open_continue (tPORT *p_port);
extern void port_start_port_open (tPORT *p_port);
extern void port_start_par_neg (tPORT *p_port);
extern void port_start_control (tPORT *p_port);
extern void port_start_close (tPORT *p_port);
extern void port_rfc_closed (tPORT *p_port, UINT8 res);
#ifdef __cplusplus
}
#endif
#endif