esp-idf/components/idf_test/unit_test/InitialConditionAll.yml
Ivan Grokhotkov e9913a11c1 Merge branch 'test/reboot_between_unit_test_cases' into 'release/v2.0'
CI: add reset between running each unit test cases

Unit test is designed to detect bug **within** each test case. Therefore we'll reset between each case to provide a clean context. We will later add stress cases to run unit test cases together to detect potential bugs.

See merge request !636
2017-04-10 12:59:49 +08:00

2968 lines
77 KiB
YAML

initial condition:
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
initial condition detail: AP mode, DHCP on, will autogen a TC with initial condition
APSTA1
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 31.0
tag: APM1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 ap -L
- ['R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
initial condition detail: AP mode, PC join AP, DHCP on, will autogen a TC with initial
condition APSTA2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 38.0
tag: APM2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
initial condition detail: AP mode, will NOT autogen a TC with initial condition
APSTA1
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 31.0
tag: APO1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 ap -L
- ['R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
initial condition detail: AP mode, will NOT autogen a TC with initial condition
APSTA2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 38.0
tag: APO2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 1
- ['R SSC1 C BIN_ID,0']
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
force restore cmd set:
- ''
- - SSC SSC1 upgrade -R -r 1 -s <ota_bin_size>
- [R SSC1 NC ERROR C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SOC SOC1 ULISTEN <test_tcp_port1> <pc_ip>
- [R SOC_COM L OK]
- - SOC SOC1 SETOPT REPLY BIN
- [R SOC_COM C OK]
- - SSC SSC1 upgrade -I -b 0 -f 0
- ['P SSC1 C +UPGRADE:OK']
- - SSC SSC1 upgrade -U -i <pc_ip> -p <test_tcp_port1> -u <ota_bin>
- ['P SSC1 C +UPGRADE:SUCCEED']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
initial condition detail: AP only mode, running BIN0 (located on flash id 0)
restore cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
restore post cmd set:
- ''
- - SSC SSC1 upgrade -D
- ['R SSC1 C +UPGRADE:OK']
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 31.0
tag: APOBIN0
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:3']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
initial condition detail: testing ap on sta + ap mode (autogen by APM1)
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 59.0
tag: APSTA1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:3']
- - SSC SSC1 ap -Q
- ['R SSC1 RE "\+APCONFIG:%%s,%%s,\d+,\d+,\d+,4,"%%(<target_ssid>,<target_password>)']
- - SSC SSC1 ap -L
- ['R SSC1 RE "\+LSTA:.+,%%s"%%(<pc_ip_wifi>)']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
initial condition detail: testing ap on sta + ap mode, PC join AP (autogen by APM2)
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- ['R SSC1 C +SAP:OK']
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 66.0
tag: APSTA2
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - DELAY 5
- ['']
- - ATC AT1 CWSAP_DEF <target_ssid> <target_password> <target_channel> <target_auth_enum>
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
initial condition detail: StationSoftAP mode
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 24.0
tag: ATAP1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:3 L OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - DELAY 5
- ['']
- - ATC AT1 CWSAP_DEF <target_ssid> <target_password> <target_channel> <target_auth_enum>
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
initial condition detail: StationSoftAP mode, PC join Target AP, multi link, use
dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 R *]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 31.0
tag: ATAP3
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:3 L OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - DELAY 10
- ['']
- - ATC AT1 CWSAP_DEF <target_ssid> <target_password> <target_channel> <target_auth_enum>
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
initial condition detail: StationSoftAP mode, PC join Target AP, single link, use
dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 45.0
tag: ATAP4
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+RST
- [R AT1 L OK]
initial condition detail: StationSoftAP mode, both PC join Target AP, single link,
use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 3.0
tag: ATAP5
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+RST
- [R AT1 L OK]
initial condition detail: StationSoftAP mode, both PC join Target AP, multi link,
use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 3.0
tag: ATAP6
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:2']
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
initial condition detail: SoftAP mode, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 59.0
tag: ATAPO1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:2 L OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATC AT1 CWSAP_DEF <target_ssid> <target_password> <target_channel> <target_auth_enum>
- [R AT1 L OK]
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
initial condition detail: SoftAP mode, PC join Target AP, multi link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 R *]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 66.0
tag: ATAPO3
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:2 L OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATC AT1 CWSAP_DEF <target_ssid> <target_password> <target_channel> <target_auth_enum>
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
- - WIFI <pc_wifi_nic> CONN <target_ssid> <target_password> <pc_ip_wifi> <target_auth>
<target_encryption>
- ['R PC_COM NC ERROR C +WIFICONN:OK']
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
initial condition detail: SoftAP mode, PC join Target AP, single link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CWLIF
- [R AT1 P <pc_ip>]
- - ATS AT1 AT+CWDHCP_DEF=0,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 73.0
tag: ATAPO4
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+RST
- [R AT1 L OK]
initial condition detail: SoftAP mode, both PC join Target AP, single link, use
dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 3.0
tag: ATAPO5
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+RST
- [R AT1 L OK]
initial condition detail: SoftAP mode, both PC join Target AP, multi link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 3.0
tag: ATAPO6
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
initial condition detail: StationSoftAP mode
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 87.0
tag: ATAPSTA1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
initial condition detail: StationSoftAP mode, DHCP client on
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 87.0
tag: ATAPSTA2
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CWDHCP_CUR?
- ['R AT1 C DHCP:3']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
initial condition detail: StationSoftAP mode, connected to AP, multi link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 94.0
tag: ATAPSTA3
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CWDHCP_CUR?
- ['R AT1 C DHCP:3']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
initial condition detail: StationSoftAP mode, connected to AP, single link, use
dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CWDHCP_DEF=2,1
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 101.0
tag: ATAPSTA4
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
initial condition detail: StationSoftAP mode, connected to AP, multi link, use static
ip
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 129.0
tag: ATAPSTA5
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:3']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
initial condition detail: StationSoftAP mode, connected to AP, single link, use
static ip
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 136.0
tag: ATAPSTA6
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT+RESTORE
- [R AT1 L OK, R AT1 C ready]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT+RESTORE
- [R AT1 L OK, R AT1 C ready]
initial condition detail: 'first time usage. Use restore function. '
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+RESTORE
- [R AT1 L OK, R AT1 C ready]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 143.0
tag: ATFTU
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT
- [R AT1 L OK]
- - ATS AT1 AT
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+RST
- [R AT1 L OK]
initial condition detail: none
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 3.0
tag: ATNone
test script: InitCondBase
- check cmd set:
- ''
- - DELAY 0.1
- [dummy]
force restore cmd set:
- ''
- - DELAY 0.1
- [dummy]
initial condition detail: none 2
restore cmd set:
- ''
- - DELAY 0.1
- [dummy]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 108.0
tag: ATNone2
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
initial condition detail: same as STA1, but will not autogen STA+AP STA test case
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 10.0
tag: ATOSTA1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CWDHCP_CUR?
- ['R AT1 C DHCP:3']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
initial condition detail: same as STA4, but will not autogen STA+AP STA test case
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 17.0
tag: ATOSTA4
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:3 C OK']
- - ATS AT2 AT+CWMODE_CUR?
- ['R AT2 C +CWMODE_CUR:1 C OK']
- - ATS AT1 AT+CWJAP_CUR?
- [R AT1 NC OK L ERROR]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=1
- [R AT2 L OK]
- - ATS AT1 AT+CWQAP
- [R AT1 L OK]
initial condition detail: same as OT2_1, but will not autogen STA+AP STA test case
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=1
- [R AT2 L OK]
- - ATS AT1 AT+CWQAP
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 52.0
tag: ATOT2_1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
initial condition detail: station mode, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 10.0
tag: ATSTA1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
initial condition detail: station mode, DHCP client on, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 10.0
tag: ATSTA2
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CWDHCP_CUR?
- ['R AT1 C DHCP:3']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
initial condition detail: station mode, connected to AP, multi link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 38.0
tag: ATSTA3
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CWDHCP_CUR?
- ['R AT1 C DHCP:3']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
initial condition detail: station mode, connected to AP, single link, use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATS AT1 AT+CWDHCP_DEF=1,1
- [R AT1 R *]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 17.0
tag: ATSTA4
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:1']
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
initial condition detail: station mode, connected to AP, multi link, use static
ip
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=1
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 115.0
tag: ATSTA5
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 L +CWMODE_CUR:1']
- - ATS AT1 AT+CWJAP_CUR?
- ['R AT1 C +CWJAP_CUR:', R AT1 P <ap_ssid>]
- - ATS AT1 AT+CIPMUX?
- ['R AT1 L +CIPMUX:0']
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
initial condition detail: station mode, connected to AP, single link, use static
ip
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=1
- [R AT1 L OK]
- - ATC AT1 CWJAP_DEF <ap_ssid> <ap_password>
- [R AT1 L OK]
- - ATS AT1 AT+CIPSERVER=0
- [R AT1 R *]
- - ATC AT1 CIPCLOSE <max_conn>
- [R AT1 R *]
- - ATS AT1 AT+CIPMUX=0
- [R AT1 L OK]
- - ATS AT1 AT+CIPCLOSE
- [R AT1 R *]
- - ATS AT1 AT+CIPMODE=0
- [R AT1 R *]
- - ATC AT1 CIPSTA_DEF <target_static_ip>
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 122.0
tag: ATSTA6
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:3 C OK']
- - ATS AT2 AT+CWMODE_CUR?
- ['R AT2 C +CWMODE_CUR:1 C OK']
- - ATS AT1 AT+CWJAP_CUR?
- [R AT1 NC OK L ERROR]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=1
- [R AT2 L OK]
- - ATS AT1 AT+CWQAP
- [R AT1 L OK]
initial condition detail: Target 1 in StationSoftAP mode, Target 2 in station mode,
use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=3
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=1
- [R AT2 L OK]
- - ATS AT1 AT+CWQAP
- [R AT1 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 52.0
tag: ATT2_1
test script: InitCondBase
- check cmd set:
- ''
- - ATS AT1 AT+CWMODE_CUR?
- ['R AT1 C +CWMODE_CUR:2 C OK']
- - ATS AT2 AT+CWMODE_CUR?
- ['R AT2 C +CWMODE_CUR:3 C OK']
- - ATS AT1 AT+CWJAP_CUR?
- [R AT1 NC OK L ERROR]
force restore cmd set:
- ''
- - ATS AT1 AT+RST
- [R AT1 C ready]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=3
- [R AT2 L OK]
initial condition detail: Target 1 in SoftAP mode, Target 2 in StationSoftAP mode,
use dhcp
restore cmd set:
- ''
- - ATSO AT1 +++
- ['']
- - ATS AT1 AT
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - ATS AT1 AT+CWMODE_DEF=2
- [R AT1 L OK]
- - ATS AT2 AT+CWMODE_DEF=3
- [R AT2 L OK]
restore post cmd set:
- ''
- - ATS AT1 AT+CWSTOPSMART
- [R AT1 R *]
- - ATS AT1 AT+SAVETRANSLINK=0
- [R AT1 R *]
- - AT+SYSRAM
- ['R AT1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 80.0
tag: ATT2_2
test script: InitCondBase
- check cmd set:
- ''
- - ASSERT
- [dummy]
force restore cmd set:
- ''
- - SSC SSC[1-<node_num>] reboot
- ['P SSC[1-<node_num>] C !!!ready!!!']
- - SSC SSC[1-<node_num>] mesh -E -o 0
- ['P SSC[1-<node_num>] C +MESH:DISABLED']
- - SSC SSC[1-<node_num>] op -S -o 1
- ['P SSC[1-<node_num>] C +MODE:OK']
- - SSC SSC[1-<node_num>] sta -D
- ['P SSC[1-<node_num>] C +QAP:OK']
initial condition detail: all mesh node disabled
restore cmd set:
- ''
- - SSC SSC[1-<node_num>] mesh -E -o 0
- ['P SSC[1-<node_num>] C +MESH:DISABLED']
- - SSC SSC[1-<node_num>] op -S -o 1
- ['P SSC[1-<node_num>] C +MODE:OK']
- - SSC SSC[1-<node_num>] sta -D
- ['P SSC[1-<node_num>] C +QAP:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 31.0
tag: DISABLED
test script: InitCondBase
- check cmd set:
- ''
- - ASSERT
- [dummy]
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
force restore cmd set:
- ''
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip>
- [R SOC_COM L OK]
- - SSC SSC[1-<node_num>] mesh -E -o 0
- ['P SSC[1-<node_num>] C +MESH:DISABLED']
- - SSC SSC[1-<node_num>] mesh -I -g <group_id> -a 4 -k <target_password> -i <pc_ip>
-p <test_tcp_port1> -h 5
- ['P SSC[1-<node_num>] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK']
- - SSC SSC[1-<node_num>] mesh -A -s <ap_ssid> -k <ap_password>
- ['P SSC[1-<node_num>] C +MESHINIT:AP,OK']
- - SSC SSC1 mesh -E -o 1 -t 2
- ['P SSC1 C +MESH:ENABLED']
- - SOC SOC1 MACCEPT GSOC1
- [R SOC_COM L OK]
- - SSC SSC[2-<node_num>] mesh -E -o 1 -t 2
- ['P SSC[2-<node_num>] C +MESH:ENABLED']
- - DELAY 60
- ['']
- - SSC SSC[1-<node_num>] mesh -C
- ['P SSC[1-<node_num>] C +MESH:CONNECTED']
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
- - SSC SSC[1-<node_num>] mesh -O -t 1 -o 1
- ['P SSC[1-<node_num>] C +MESH:OK']
initial condition detail: all mesh node enabled as ONLINE, mesh network established
restore cmd set:
- ''
- - SSC SSC[1-<node_num>] reboot
- ['P SSC[1-<node_num>] C !!!ready!!!']
- - SOC SOC1 LISTEN <test_tcp_port1> <pc_ip>
- [R SOC_COM L OK]
- - SSC SSC[1-<node_num>] mesh -E -o 0
- ['P SSC[1-<node_num>] C +MESH:DISABLED']
- - SSC SSC[1-<node_num>] mesh -I -g <group_id> -a 4 -k <target_password> -i <pc_ip>
-p <test_tcp_port1> -h 5
- ['P SSC[1-<node_num>] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK']
- - SSC SSC[1-<node_num>] mesh -A -s <ap_ssid> -k <ap_password>
- ['P SSC[1-<node_num>] C +MESHINIT:AP,OK']
- - SSC SSC1 mesh -E -o 1 -t 2
- ['P SSC1 C +MESH:ENABLED']
- - SOC SOC1 MACCEPT GSOC1
- [R SOC_COM L OK]
- - SSC SSC[2-<node_num>] mesh -E -o 1 -t 2
- ['P SSC[2-<node_num>] C +MESH:ENABLED']
- - DELAY 60
- ['']
- - SSC SSC[1-<node_num>] mesh -C
- ['P SSC[1-<node_num>] C +MESH:CONNECTED']
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
- - SSC SSC[1-<node_num>] mesh -O -t 1 -o 1
- ['P SSC[1-<node_num>] C +MESH:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 17.0
tag: ENABLED_1
test script: InitCondBase
- check cmd set:
- ''
- - ASSERT
- [dummy]
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
force restore cmd set:
- ''
- - SSC SSC[1-<node_num>] reboot
- ['P SSC[1-<node_num>] C !!!ready!!!']
- - SSC SSC[1-<node_num>] mesh -I -g <group_id> -a 4 -k <target_password> -i <pc_ip>
-p <test_tcp_port1> -h 5
- ['P SSC[1-<node_num>] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK']
- - SSC SSC1 mesh -A -s <ap_ssid> -k <ap_password>
- ['P SSC1 C +MESHINIT:AP,OK']
- - SSC SSC1 mesh -E -o 1 -t 1
- ['P SSC1 C +MESH:ENABLED']
- - SSC SSC[2-<node_num>] mesh -E -o 1 -t 2
- ['']
- - DELAY 60
- ['P SSC[2-<node_num>] C +MESH:ENABLED']
- - SSC SSC[1-<node_num>] mesh -C
- ['P SSC[1-<node_num>] C +MESH:CONNECTED']
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
initial condition detail: root as LOCAL, rest node as ONLINE, mesh network established
restore cmd set:
- ''
- - SSC SSC[1-<node_num>] mesh -E -o 0
- ['P SSC[1-<node_num>] C +MESH:DISABLED']
- - SSC SSC[1-<node_num>] mesh -I -g <group_id> -a 4 -k <target_password> -i <pc_ip>
-p <test_tcp_port1> -h 5
- ['P SSC[1-<node_num>] C ENCRYPTION,OK C GROUP,OK C SERVER,OK C HOP,OK']
- - SSC SSC1 mesh -A -s <ap_ssid> -k <ap_password>
- ['P SSC1 C +MESHINIT:AP,OK']
- - SSC SSC1 mesh -E -o 1 -t 1
- ['P SSC1 C +MESH:ENABLED']
- - SSC SSC[2-<node_num>] mesh -E -o 1 -t 2
- ['']
- - DELAY 60
- ['P SSC[2-<node_num>] C +MESH:ENABLED']
- - SSC SSC[1-<node_num>] mesh -C
- ['P SSC[1-<node_num>] C +MESH:CONNECTED']
- - SSC SSC[1-<node_num>] mesh -Q -t 4
- ['R SSC[1-<node_num>] T <node_num>']
- - MESHTREE
- ['R PC_COM RE "MESHTREE:%%s%20nodes"%%(<node_num>)']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 24.0
tag: ENABLED_2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
- - SSC SSC1 espnow -D
- ['R SSC1 C +ESPNOW:']
force restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] reboot
- ['R SSC[1-<dev_num>] C !!!ready!!!']
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -m <target_ap_mac> -o 2
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 espnow -D
- ['R SSC1 C +ESPNOW:']
initial condition detail: one target in AP mode and espnow is de-initialized
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 mac -S -m <target_ap_mac> -o 2
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC1 espnow -D
- ['R SSC1 C +ESPNOW:']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 17.0
tag: NOW1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC[1-<dev_num>] op -Q
- ['R SSC[1-<dev_num>] C +CURMODE:2']
- - SSC SSC[1-<dev_num>] mac -Q -o 3
- ['R SSC[1-<dev_num>] P <target[1-<dev_num>]_ap_mac> P <target[1-<dev_num>]_mac>']
- - SSC SSC[1-<dev_num>] espnow -D
- ['R SSC[1-<dev_num>] C +ESPNOW:']
- - SSC SSC[1-<dev_num>] espnow -I
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
force restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] reboot
- ['R SSC[1-<dev_num>] C !!!ready!!!']
- - SSC SSC[1-<dev_num>] op -S -o 3
- ['R SSC[1-<dev_num>] C +MODE:OK']
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_ap_mac> -o 2
- ['R SSC[1-<dev_num>] C +MAC:AP,OK']
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_mac> -o 1
- ['R SSC[1-<dev_num>] C +MAC:STA,OK']
- - SSC SSC[1-<dev_num>] op -S -o 2
- ['R SSC[1-<dev_num>] C +MODE:OK']
- - SSC SSC[1-<dev_num>] espnow -D
- ['R SSC[1-<dev_num>] C +ESPNOW:']
- - SSC SSC[1-<dev_num>] espnow -I
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
initial condition detail: multiple (<dev_num>) targets in AP mode, espnow is initialized
with self role slave
restore cmd set:
- ''
- - SSC SSC[1-<dev_num>] op -S -o 3
- ['R SSC[1-<dev_num>] C +MODE:OK']
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_ap_mac> -o 2
- ['R SSC[1-<dev_num>] C +MAC:AP,OK']
- - SSC SSC[1-<dev_num>] mac -S -m <target[1-<dev_num>]_mac> -o 1
- ['R SSC[1-<dev_num>] C +MAC:STA,OK']
- - SSC SSC[1-<dev_num>] op -S -o 2
- ['R SSC[1-<dev_num>] C +MODE:OK']
- - SSC SSC[1-<dev_num>] espnow -D
- ['R SSC[1-<dev_num>] C +ESPNOW:']
- - SSC SSC[1-<dev_num>] espnow -I
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
- - SSC SSC[1-<dev_num>] espnow -R -t Set -r 2
- ['R SSC[1-<dev_num>] C +ESPNOW:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 24.0
tag: NOW2
test script: InitCondBase
- check cmd set:
- ''
- - DELAY 0.1
- [dummy]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
initial condition detail: none
restore cmd set:
- ''
- - DELAY 0.1
- [dummy]
restore post cmd set:
- ''
- - DELAY 0.1
- [dummy]
script path: InitCondBase.py
start: 10.0
tag: None
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 sp -D
- ['R SSC1 C +SP:OK']
force restore cmd set:
- ''
- - SSC SSC1 sp -D
- ['R SSC1 C +SP:OK']
initial condition detail: one target and simple is de-inited
restore cmd set:
- ''
- - SSC SSC1 sp -D
- ['R SSC1 C +SP:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 31.0
tag: PAIR1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC[1,2] op -Q
- ['R SSC[1,2] C +MODE:[2,1]']
- - SSC SSC[1,2] mac -Q -o 3
- ['R SSC[1,2] P <target[1,2]_ap_mac> P <target[1,2]_mac>']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
force restore cmd set:
- ''
- - SSC SSC[1,2] reboot
- ['R SSC[1,2] C !!!ready!!!']
- - SSC SSC[1,2] op -S -o 3
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- ['R SSC[1,2] C +MAC:AP,OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- ['R SSC[1,2] C +MAC:STA,OK']
- - SSC SSC[1,2] op -S -o [2,1]
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
initial condition detail: target1 in AP mode, target2 in STA mode, two targets de-init
and init simple pair
restore cmd set:
- ''
- - SSC SSC[1,2] op -S -o 3
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- ['R SSC[1,2] C +MAC:AP,OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- ['R SSC[1,2] C +MAC:STA,OK']
- - SSC SSC[1,2] op -S -o [2,1]
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 38.0
tag: PAIR2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC[1,2] op -Q
- ['R SSC[1,2] C +MODE:[3,3]']
- - SSC SSC[1,2] mac -Q -o 3
- ['R SSC[1,2] P <target[1,2]_ap_mac> P <target[1,2]_mac>']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
force restore cmd set:
- ''
- - SSC SSC[1,2] reboot
- ['R SSC[1,2] C !!!ready!!!']
- - SSC SSC[1,2] op -S -o [3,3]
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- ['R SSC[1,2] C +MAC:AP,OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- ['R SSC[1,2] C +MAC:STA,OK']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
initial condition detail: target1 and target2 in STA+AP mode, two targets de-init
and init simple pair
restore cmd set:
- ''
- - SSC SSC[1,2] op -S -o [3,3]
- ['R SSC[1,2] C +MODE:OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_ap_mac> -o 2
- ['R SSC[1,2] C +MAC:AP,OK']
- - SSC SSC[1,2] mac -S -m <target[1,2]_mac> -o 1
- ['R SSC[1,2] C +MAC:STA,OK']
- - SSC SSC[1,2] sp -D
- ['R SSC[1,2] C +SP:OK']
- - SSC SSC[1,2] sp -I
- ['R SSC[1,2] C +SP:OK']
restore post cmd set:
- ''
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 45.0
tag: PAIR3
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:3']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
initial condition detail: testing sta on sta + ap mode, quit AP (autogen by STAM1)
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 45.0
tag: STAAP1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:3']
- - SSC SSC1 sta -Q
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
initial condition detail: testing sta on sta + ap mode, join AP, DHCP on (autogen
by STAM2)
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 52.0
tag: STAAP2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 1
- ['R SSC1 C BIN_ID,0']
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
force restore cmd set:
- ''
- - SSC SSC1 upgrade -R -r 1 -s <ota_bin_size>
- [R SSC1 NC ERROR C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SOC SOC1 ULISTEN <test_tcp_port1> <pc_ip>
- [R SOC_COM L OK]
- - SOC SOC1 SETOPT REPLY BIN
- [R SOC_COM C OK]
- - SSC SSC1 upgrade -I -b 0 -f 0
- ['P SSC1 C +UPGRADE:OK']
- - SSC SSC1 upgrade -U -i <pc_ip> -p <test_tcp_port1> -u <ota_bin>
- ['P SSC1 C +UPGRADE:SUCCEED']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
initial condition detail: APSTA mode, connected to AP, running BIN0 (located on
flash id 0)
restore cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
restore post cmd set:
- ''
- - SSC SSC1 upgrade -D
- ['R SSC1 C +UPGRADE:OK']
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 24.0
tag: STAAPBIN0
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:1']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
initial condition detail: sta mode, quit AP, DHCP on, will autogen a TC with initial
condition STAAP1
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 17.0
tag: STAM1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:1']
- - SSC SSC1 sta -Q
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
initial condition detail: sta mode, join AP, DHCP on, will autogen a TC with initial
condition STAAP2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 24.0
tag: STAM2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 1
- ['R SSC1 C BIN_ID,0']
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
force restore cmd set:
- ''
- - SSC SSC1 upgrade -R -r 1 -s <ota_bin_size>
- [R SSC1 NC ERROR C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SOC SOC1 ULISTEN <test_tcp_port1> <pc_ip>
- [R SOC_COM L OK]
- - SOC SOC1 SETOPT REPLY BIN
- [R SOC_COM C OK]
- - SSC SSC1 upgrade -I -b 0 -f 0
- ['P SSC1 C +UPGRADE:OK']
- - SSC SSC1 upgrade -U -i <pc_ip> -p <test_tcp_port1> -u <ota_bin>
- ['P SSC1 C +UPGRADE:SUCCEED']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
initial condition detail: STA mode, connected to AP, running BIN0 (located on flash
id 0)
restore cmd set:
- ''
- - SSC SSC1 upgrade -Q -t 2 -b 0
- ['R SSC1 C BIN_INFO,0']
- - SSC SSC1 upgrade -R -b 0
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
restore post cmd set:
- ''
- - SSC SSC1 upgrade -D
- ['R SSC1 C +UPGRADE:OK']
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 17.0
tag: STAMBIN0
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:1']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
initial condition detail: sta mode, quit AP, will NOT autogen a TC with initial
condition STAAP1
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 sta -D
- ['R SSC1 C +QAP:']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 17.0
tag: STAO1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:1']
- - SSC SSC1 sta -Q
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
- - SSC SSC1 dhcp -Q -o 1
- ['R SSC1 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 1
- [R SSC1 P <target_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
initial condition detail: sta mode, join AP, DHCP on, will NOT autogen a TC with
initial condition STAAP2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 1
- ['R SSC1 C +MODE:OK']
- - SSC SSC1 dhcp -S -o 1
- [R SSC1 C +DHCP]
- - SSC SSC1 mac -S -o 1 -m <target_mac>
- ['R SSC1 C +MAC:STA,OK']
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- ['R SSC1 RE "\+JAP:CONNECTED,%%s"%%(<ap_ssid>)']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 24.0
tag: STAO2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC2 op -Q
- ['R SSC2 C +CURMODE:1']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC2 dhcp -Q -o 1
- ['R SSC2 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
- - SSC SSC2 mac -Q -o 1
- [R SSC2 P <target2_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC2 reboot
- [R SSC2 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 1
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
initial condition detail: same as T2_1 but will NOT autogen a TC with initial condition
T2_2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 1
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 73.0
tag: T2O_1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:2']
- - SSC SSC2 op -Q
- ['R SSC2 C +CURMODE:1']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC2 dhcp -Q -o 1
- ['R SSC2 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
- - SSC SSC2 mac -Q -o 1
- [R SSC2 P <target2_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC2 reboot
- [R SSC2 C !!!ready!!!]
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 1
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
initial condition detail: target 1 as SoftAP, target 2 as STA, will autogen a TC
with initial condition T2_2
restore cmd set:
- ''
- - SSC SSC1 op -S -o 2
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 1
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- ['']
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 73.0
tag: T2_1
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC1 op -Q
- ['R SSC1 C +CURMODE:3']
- - SSC SSC2 op -Q
- ['R SSC2 C +CURMODE:3']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- [R SSC2 C +CLOSEALL]
- - SSC SSC1 dhcp -Q -o 2
- ['R SSC1 C +DHCP:AP,STARTED']
- - SSC SSC2 dhcp -Q -o 1
- ['R SSC2 C +DHCP:STA,STARTED']
- - SSC SSC1 mac -Q -o 2
- [R SSC1 P <target_ap_mac>]
- - SSC SSC2 mac -Q -o 1
- [R SSC2 P <target2_mac>]
force restore cmd set:
- ''
- - SSC SSC1 reboot
- [R SSC1 C !!!ready!!!]
- - SSC SSC2 reboot
- [R SSC2 C !!!ready!!!]
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 3
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- [R SSC2 C +CLOSEALL]
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
initial condition detail: target 1 as AP+STA, target 2 as AP+STA (autogen)
restore cmd set:
- ''
- - SSC SSC1 op -S -o 3
- ['R SSC1 C +MODE:OK']
- - SSC SSC2 op -S -o 3
- ['R SSC2 C +MODE:OK']
- - SSC SSC2 sta -D
- ['R SSC2 C +QAP:']
- - SSC SSC2 soc -T
- [R SSC2 C +CLOSEALL]
- - SSC SSC1 dhcp -S -o 2
- [R SSC1 C +DHCP]
- - SSC SSC2 dhcp -S -o 1
- [R SSC2 C +DHCP]
- - SSC SSC1 mac -S -o 2 -m <target_ap_mac>
- ['R SSC1 C +MAC:AP,OK']
- - SSC SSC2 mac -S -o 1 -m <target2_mac>
- ['R SSC2 C +MAC:STA,OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 ram
- ['R SSC1 C +FREEHEAP:']
script path: InitCondBase.py
start: 80.0
tag: T2_2
test script: InitCondBase
- check cmd set:
- ''
- - SSC SSC[1-3] op -Q
- ['R SSC[1-3] C +CURMODE:3']
- - SSC SSC[1-3] phy -Q -o 3
- ['R SSC[1-3] C STA,n,40 C AP,n,40']
force restore cmd set:
- ''
- - SSC SSC[1-3] reboot
- ['R SSC[1-3] C !!!ready!!!']
- - SSC SSC[1-3] op -S -o 3
- ['R SSC[1-3] C +MODE:OK']
- - SSC SSC[1-3] phy -S -o 3 -m n -b 40
- ['R SSC[1-3] C +PHY:OK']
initial condition detail: '1. target 1 and target 2 set to AP+STA mode, target 3
set to STA mode
2. all interface of target 2,3 set to 11n ht40
3. config softAP of target 1 and target 2'
restore cmd set:
- ''
- - SSC SSC[1-3] op -S -o 3
- ['R SSC[1-3] C +MODE:OK']
- - SSC SSC[1-3] phy -S -o 3 -m n -b 40
- ['R SSC[1-3] C +PHY:OK']
restore post cmd set:
- ''
- - SSC SSC1 soc -T
- [R SSC1 C +CLOSEALL]
- - SSC SSC1 sta -R -r 1
- [R SSC1 C OK]
- - SSC SSC1 ram
- ['R SSC1 A <heap_size>:(\d+)']
script path: InitCondBase.py
start: 87.0
tag: T3_PHY1
test script: InitCondBase
- check cmd set:
- ''
- - FREBOOT UT1
- ['']
- - DELAY 3
- ['']
- - UT UT1 -
- [R UT1 C Tests C Failures C Ignored]
force restore cmd set:
- ''
- - FREBOOT UT1
- ['']
- - DELAY 3
- ['']
- - UT UT1 -
- [R UT1 C Tests C Failures C Ignored]
initial condition detail: At UT menu page
restore cmd set:
- ''
- - FREBOOT UT1
- ['']
- - DELAY 3
- ['']
- - UT UT1 -
- [R UT1 C Tests C Failures C Ignored]
restore post cmd set:
- ''
- - DELAY 0.1
- ['']
script path: InitCondBase.py
tag: UTINIT1
test script: InitCondBase