alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
3a1e8a9810
esp-idf/examples/system/ulp_fsm/ulp_adc
History
Jakob Hasse 81e9266204 [examples]: removed hyphens 
Replaced hyphens with underscores in examples
project definition for all examples which had
hyphens in their project name. dpp-enrollee is
an exceptions because the name matches the
project directory name while the project
directory also contains hyphens.
2021-10-09 13:58:24 +08:00
..
main RISCV-ULP: Add DS18B20 1wire RISCV-ULP example 2021-06-25 11:26:39 +08:00
CMakeLists.txt [examples]: removed hyphens 2021-10-09 13:58:24 +08:00
example_test.py RISCV-ULP: Add DS18B20 1wire RISCV-ULP example 2021-06-25 11:26:39 +08:00
Makefile [examples]: removed hyphens 2021-10-09 13:58:24 +08:00
README.md RISCV-ULP: Add DS18B20 1wire RISCV-ULP example 2021-06-25 11:26:39 +08:00
sdkconfig.defaults RISCV-ULP: Add DS18B20 1wire RISCV-ULP example 2021-06-25 11:26:39 +08:00

README.md

Supported Targets ESP32

ULP ADC Example

This example demonstrates how to use the ULP coprocessor to poll ADC in deep sleep.

ULP program periodically measures the input voltage on GPIO34. The voltage is compared to two thresholds. If the voltage is less than the low threshold, or higher than the high threshold, ULP wakes up the system.

By default, thresholds are set to 1.35V and 1.75V, approximately.

GPIO15 is connected to ground to supress output from ROM bootloader.

Average current drawn by the ESP32 in this example (with the default 4x averaging) depending on the measurement frequency is as follows:

Measurement frequency, Hz Average current, uA
10 8.5
50 20
100 37

In this example, the CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP Kconfig option is used, which allows you to reduce the boot time of the bootloader during waking up from deep sleep. The bootloader stores in rtc memory the address of a running partition and uses it when it wakes up. This example allows you to skip all image checks and speed up the boot.

Example output

Below is the output from this example.

Not ULP wakeup
Entering deep sleep

Deep sleep wakeup
ULP did 1531 measurements
Thresholds:  low=1500  high=2000
Value=973 was below threshold
Entering deep sleep

Deep sleep wakeup
ULP did 2 measurements
Thresholds:  low=1500  high=2000
Value=0 was below threshold
Entering deep sleep

Deep sleep wakeup
ULP did 2 measurements
Thresholds:  low=1500  high=2000
Value=0 was below threshold
Entering deep sleep