esp-idf/components/hal/spi_flash_hal.c

152 lines
5.2 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
// HAL for SPI Flash (non-IRAM part)
// The IRAM part is in spi_flash_hal_iram.c, spi_flash_hal_gpspi.c, spi_flash_hal_common.inc.
#include <stdlib.h>
#include <string.h>
#include <math.h>
#include "soc/soc_caps.h"
#include "hal/spi_flash_hal.h"
#include "hal/assert.h"
#include "hal/log.h"
#include "hal/spi_flash_types.h"
#define APB_CYCLE_NS (1000*1000*1000LL/APB_CLK_FREQ)
static const char *TAG = "flash_hal";
static uint32_t get_flash_clock_divider(const spi_flash_hal_config_t *cfg)
{
int clk_source = cfg->clock_src_freq;
// On ESP32, ESP32-S2, ESP32-C3, we allow specific frequency 26.666MHz
// If user passes freq_mhz like 26 or 27, it's allowed to use integer divider 3.
// However on other chips or on other frequency, we only allow user pass frequency which
// can be integer divided. If no, the following strategy is round up the division and
// round down flash frequency to keep it safe.
int best_div = 0;
if (clk_source < cfg->freq_mhz) {
HAL_LOGE(TAG, "Target frequency %dMHz higher than supported.", cfg->freq_mhz);
abort();
}
#if CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32C3
if (cfg->freq_mhz == 26 || cfg->freq_mhz == 27) {
best_div = 3;
} else
#endif
{
best_div = (int)ceil((double)clk_source / (double)cfg->freq_mhz);
if ((cfg->clock_src_freq % cfg->freq_mhz) != 0) {
HAL_LOGW(TAG, "Flash clock frequency round down to %d", (int)floor((double)clk_source / (double)best_div));
}
}
return best_div;
}
static uint32_t spi_flash_cal_clock(const spi_flash_hal_config_t *cfg)
{
uint32_t div_parameter = spi_flash_ll_calculate_clock_reg(cfg->host_id, get_flash_clock_divider(cfg));
return div_parameter;
}
static inline int get_dummy_n(bool gpio_is_used, int input_delay_ns, int eff_clk)
{
const int apbclk_kHz = APB_CLK_FREQ / 1000;
//calculate how many apb clocks a period has
const int apbclk_n = APB_CLK_FREQ / eff_clk;
const int gpio_delay_ns = gpio_is_used ? GPIO_MATRIX_DELAY_NS : 0;
//calculate how many apb clocks the delay is, the 1 is to compensate in case ``input_delay_ns`` is rounded off.
int apb_period_n = (1 + input_delay_ns + gpio_delay_ns) * apbclk_kHz / 1000 / 1000;
if (apb_period_n < 0) {
apb_period_n = 0;
}
return apb_period_n / apbclk_n;
}
#if SOC_SPI_MEM_SUPPORT_TIMING_TUNING
static inline int extra_dummy_under_timing_tuning(const spi_flash_hal_config_t *cfg)
{
bool main_flash = (cfg->host_id == SPI1_HOST && cfg->cs_num == 0);
int extra_dummy = 0;
if (main_flash) {
/**
* For Octal Flash, the dummy is `usr_dummy` + `extra_dummy`, they are in two different regs, we don't touch `extra_dummy` here, so set extra_dummy 0.
* Instead, for both Quad and Octal Flash, we use `usr_dummy` and set the whole dummy length (usr_dummy + extra_dummy) to this register.
*/
extra_dummy = cfg->extra_dummy;
} else {
// TODO: for other flash chips, dummy get logic implement here. Currently, still calculate extra dummy by itself.
abort();
}
return extra_dummy;
}
#endif //SOC_SPI_MEM_SUPPORT_TIMING_TUNING
esp_err_t spi_flash_hal_init(spi_flash_hal_context_t *data_out, const spi_flash_hal_config_t *cfg)
{
if (cfg->cs_num >= SOC_SPI_PERIPH_CS_NUM(cfg->host_id)) {
return ESP_ERR_INVALID_ARG;
}
*data_out = (spi_flash_hal_context_t) {
.inst = data_out->inst, // Keeps the function pointer table
.spi = spi_flash_ll_get_hw(cfg->host_id),
.cs_num = cfg->cs_num,
.cs_hold = cfg->cs_hold,
.cs_setup = cfg->cs_setup,
.base_io_mode = cfg->default_io_mode,
};
#if SOC_SPI_MEM_SUPPORT_TIMING_TUNING
if (cfg->using_timing_tuning) {
data_out->extra_dummy = extra_dummy_under_timing_tuning(cfg);
data_out->clock_conf = cfg->clock_config;
} else
#endif // SOC_SPI_MEM_SUPPORT_TIMING_TUNING
{
data_out->extra_dummy = get_dummy_n(!cfg->iomux, cfg->input_delay_ns, APB_CLK_FREQ/get_flash_clock_divider(cfg));
data_out->clock_conf = (spi_flash_ll_clock_reg_t)spi_flash_cal_clock(cfg);
}
if (cfg->auto_sus_en) {
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_AUTO_SUSPEND;
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_AUTO_RESUME;
}
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
if (cfg->octal_mode_en) {
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_OCTAL_MODE;
}
if (cfg->default_io_mode == SPI_FLASH_OPI_DTR) {
data_out->slicer_flags |= SPI_FLASH_HOST_CONTEXT_SLICER_FLAG_DTR;
}
#endif
return ESP_OK;
}
bool spi_flash_hal_supports_direct_write(spi_flash_host_inst_t *host, const void *p)
{
(void)p;
bool direct_write = (((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI1_HOST));
return direct_write;
}
bool spi_flash_hal_supports_direct_read(spi_flash_host_inst_t *host, const void *p)
{
(void)p;
//currently the host doesn't support to read through dma, no word-aligned requirements
bool direct_read = ( ((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI1_HOST));
return direct_read;
}