esp-idf/examples/wifi
2022-06-02 14:17:31 +08:00
..
espnow ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
fast_scan ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
ftm tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
getting_started ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
iperf ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
power_save ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
roaming ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
scan ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
smart_config ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
wifi_eap_fast ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
wifi_easy_connect/dpp-enrollee ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
wifi_enterprise ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
wps ci: partially enable example build for esp32c2 2022-06-02 14:17:31 +08:00
README.md examples: create a new folder structure for generic network examples 2021-07-26 12:25:19 +02:00

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.