mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
dd81b56fb6
Updated examples to be able to build for C5 and P4. Added Ethernet support for static_ip example.
50 lines
2.4 KiB
Markdown
50 lines
2.4 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
|
|
|
|
# HTTPS x509 Bundle Example
|
|
|
|
This example shows how to use the ESP certificate bundle utility to embed a bundle of x509 certificates and use them to
|
|
establish a simple HTTPS connection over a secure connection. The path of the certificates are specified using menuconfig.
|
|
|
|
See the README.md file in the upper level 'examples' directory for more information about examples.
|
|
|
|
## Example workflow
|
|
- ESP TLS is initialized with the certificate bundle option enabled.
|
|
- The application loops through the given URLs, establishing a secure TLS connection to all of them, verifying the server certificate included.
|
|
|
|
### Configure the project
|
|
|
|
* Open the project configuration menu (`idf.py menuconfig`)
|
|
* Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../README.md) for more details.
|
|
* If using a different folder than `certs` for storing certificates then update `Custom Certificate Bundle Path` under `Component config` - `mbedTLS` - `Certificate Bundle`
|
|
|
|
### Build and Flash
|
|
|
|
Build the project and flash it to the board, then run monitor tool to view serial output:
|
|
|
|
```
|
|
idf.py -p PORT flash monitor
|
|
```
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Example Output
|
|
```
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (491) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
|
|
I (4051) example_connect: Ethernet Link Up
|
|
I (5971) esp_netif_handlers: eth ip: 192.168.2.137, mask: 255.255.255.0, gw: 192.168.2.2
|
|
I (5971) example_connect: Connected to Ethernet
|
|
I (5971) example_connect: IPv4 address: 192.168.2.137
|
|
I (5971) example_connect: IPv6 address: fe80:0000:0000:0000:bedd:c2ff:fed4:a92b
|
|
I (5981) example: Connecting to 2 URLs
|
|
I (7100) esp-x509-crt-bundle: Certificate validated
|
|
I (8371) example: Connection established to https://www.howsmyssl.com/a/check
|
|
I (11730) esp-x509-crt-bundle: Certificate validated
|
|
I (11821) example: Connection established to https://espressif.com
|
|
I (12821) example: Completed 2 connections
|
|
I (12821) example: Starting over again...
|
|
```
|