esp-idf/components/idf_test/integration_test/TC_IT_TCPIP_DHCP.yml
He Yin Ling b9f7e0a1a2 test: split CI test environment:
Currently CI test environment is complicated, usually includes NIC, AP.
These devices are not used for a lot test cases. Therefore we split the
test environment, remove unnecessary devices. Then it will be easier to
create CI runners.
2018-09-05 01:45:48 +00:00

996 lines
28 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

test cases:
- CI ready: 'Yes'
ID: TCPIP_DHCP_0101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -i 0.0.0.0
- - R SSC1 C +IP
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - ''
- - DELAY 20
- - P PC_COM C +DELAYDONE
- P SSC1 NC +JAP:CONNECTED
- - SSC SSC1 dhcp -S -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -Q
- - R SSC1 C +STAIP:0.0.0.0
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 C +JAP:CONNECTED
- - SSC SSC1 ip -Q
- - R SSC1 RE "\+STAIP:%%s"%%(<target_ip>)
execution time: 0.0
expected result: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1
打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip"
initial condition: STAM1
level: Integration
module: TCPIP
steps: "1.target1 关闭DHCP OK\n2.target1 设置ip add OK\n3.target1 连接AP fail\n4.target1
打开DHCP OK\n5.查询到sta ip \n6.target1 连接AP ok\n7.查询到sta ip 为target_ip"
sub module: DHCP
summary: dhcp client function test
test environment: SSC_T1_5
test point 1: basic function
test point 2: DHCP client function test
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0103
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 op -S -o 3
- - R SSC1 C +MODE:OK
- - SSC SSC1 dhcp -S -o 3
- - R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK
- - SSC SSC1 dhcp -Q -o 3
- - R SSC1 C +DHCP:STA,STARTED C +DHCP:AP,STARTED
- - SSC SSC1 dhcp -Q -o 1
- - R SSC1 C +DHCP:STA,STARTED NC +DHCP:AP,STARTED
- - SSC SSC1 dhcp -Q -o 2
- - R SSC1 NC +DHCP:STA,STARTED C +DHCP:AP,STARTED
- - SSC SSC1 dhcp -E -o 3
- - R SSC1 C +DHCP:AP,OK C +DHCP:STA,OK
- - SSC SSC1 dhcp -Q -o 3
- - R SSC1 C +DHCP:STA,STOPPED C +DHCP:AP,STOPPED
execution time: 0.0
expected result: |-
1.OK
2.OK
3.STA&AP STARTED
4.STA STARTED
5.AP STARTED
6.OK
7.STA&AP STOPPED
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1.target1 设置mode 为sta+softAP mode
2.target1 打开DHCP 3
3.target1 查询DHCP 状态
4.target1 查询sta DHCP 状态
5.target1 查询softAP DHCP 状态
6.target1 关闭 DHCP 3
7.target1 查询 DHCP 状态
sub module: DHCP
summary: dhcp status query
test environment: SSC_T1_4
test point 1: basic function
test point 2: DHCP client function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0201
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 ip -S -o 2 -i <target_ap_ip>
- - R SSC1 C +IP:OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -L -s 192.168.4.1 -e 192.168.4.10
- - R SSC1 C +DHCP:LEASE,ERROR
- - SSC SSC1 dhcp -L -s 192.168.4.5 -e 192.168.4.2
- - R SSC1 C +DHCP:LEASE,ERROR
- - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.5
- - R SSC1 C +DHCP:LEASE,ERROR
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
execution time: 0.0
expected result: |-
1.target1 关闭DHCP 2 OK
2.target1 设置ip 成功
3.设置dhcp 地址池 OK
4.ERROR
5.ERROR
6.ERROR
7.target1 打开DHCP ok
initial condition: APM1
level: Integration
module: TCPIP
steps: "1.target1 关闭DHCP 2 \n2.target1 设置ip \n3.设置dhcp 地址池\n4.设置dhcp错误的参数\n5.设置dhcp错误的参数\n6.设置dhcp错误的参数\n7.target1
打开DHCP ok"
sub module: DHCP
summary: server dhcp lease test
test environment: SSC_T1_4
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0202
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - LOOP 3 4 "['01','02','03']" "[2,3,4]"
- - ''
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s}
- - R SSC2 C +MAC:STA,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.{%s}
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3,4: get IP from dhcp pool with correct sequence
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. config DHCP Server on Target1
3. target change mac, connect to Target1
4. Loop step3
sub module: DHCP
summary: dhcp server ip pool
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0203
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - LOOP 2 4 "['01','02']" "[2,3]"
- - ''
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s}
- - R SSC2 C +MAC:STA,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.{%s}
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66
- - R SSC2 C +MAC:STA,OK
- - DELAY 20
- - ''
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:0.0.0.0
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4.1 succeed
4.2 failed
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. config DHCP Server on Target1(.4.2 - .4.3)
3. target change mac, connect to Target1
4. Loop step3 twice
sub module: DHCP
summary: dhcp server ip pool empty
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0204
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.2
- - DELAY 90
- - ''
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.2
- - SSC SSC2 sta -D
- - R SSC2 C +JAP:DISCONNECTED
- - DELAY 60
- - ''
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66
- - R SSC2 C +MAC:STA,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.2
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. get IP 192.168.4.2
5. succeed
6. succeed
8. get IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. config DHCP timeout as 1 minute
3. target2 connect to target1
4. wait 90 seconds
5. check if target2 IP is same
6. target2 disconnect
7. wait 60s
8. target2 change mac and connect to target1
sub module: DHCP
summary: dhcp server timeout test
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0205
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.3 -t 1
- - P SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - P SSC1 C +DHCP:AP,OK
- P SSC2 C +JAP:DISCONNECTED
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. target2 wifi disconnected
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1
3. disable DHCP server, do config and enable
sub module: DHCP
summary: disconnect STA if config dhcp server
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0206
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - LOOP 4 4 "['01','02','03','01']" "[2,3,4,2]"
- - ''
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:{%s}
- - R SSC2 C +MAC:STA,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.{%s}
execution time: 0.0
expected result: |-
1. succeed
2. succeed
4. get IP 192.168.4.2 - 192.168.4.4
5. get IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. disable DHCP server, do config and enable
3. target2 change mac, connect to softap, disconnect
4. Loop step3 twice
5. change to first mac, connect to softap
sub module: DHCP
summary: dhcp server assign same IP to same MAC when it's not released
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0207
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - WIFI <pc_wifi_nic> DISCONN2
- - R PC_COM NC ERROR C +WIFIDISCONN:OK
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66
- - R SSC2 C +MAC:STA,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.2
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. get IP 192.168.4.2
4. succeed
5. succeed
6. get IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. disable DHCP server, do config and enable
3. PC WIFI NIC connect to target1 softap
4. target2 connect to target1 softap and disnnect
5. PC release IP and disconnected
6. target2 change mac and connect to target1
sub module: DHCP
summary: dhcp server prefer assign released IP to new client
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0207
SDK: ESP32_IDF
Test App: SSC
allow fail: '1/2'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - WIFI <pc_wifi_nic> DISCONN2
- - R PC_COM NC ERROR C +WIFIDISCONN:OK
- - SSC SSC2 sta -D
- - R SSC2 C +QAP:OK
- - SSC SSC2 mac -S -o 1 -m 10:22:33:44:55:66
- - R SSC2 C +MAC:STA,OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC2 ip -Q -o 1
- - R SSC2 C +STAIP:192.168.4.2
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. get IP 192.168.4.2
4. succeed
5. succeed
6. succeed
7. get IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. disable DHCP server, do config and enable
3. PC WIFI NIC connect to target1 softap
4. target2 connect to target1 softap and disnnect
5. PC release IP and disconnected
6. disable DHCP server and enable
7. target2 change mac and connect to target1
sub module: DHCP
summary: dhcp server prefer assign released IP to new client
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0208
SDK: |-
8266_NonOS
8266_RTOS
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - P SSC1 C +DHCP:AP,OK
- P SSC2 C +JAP:DISCONNECTED
- - SSC SSC2 sta -D
- - R SSC2 C +JAP:DISCONNECTED
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC1 ap -L
- - R SSC1 C 192.168.4.2 P <pc_wifi_nic_mac>
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. get IP 192.168.4.2
5. can only find target2 with IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1 softap
3. disable DHCP server, do config and enable
4. PC NIC connect to target1 softap
5. softap list connected station
sub module: DHCP
summary: dhcp server reconfig and new client able to get first IP in pool
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0208
SDK: ESP32_IDF
Test App: SSC
allow fail: '2/3'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - P SSC1 C +DHCP:AP,OK
- P SSC2 C +JAP:DISCONNECTED
- - SSC SSC2 sta -D
- - R SSC2 C OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC1 ap -L
- - R SSC1 C 192.168.4.2 P <pc_wifi_nic_mac>
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
7. can only find target2 with IP 192.168.4.2
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1 softap
3. disable DHCP server, do config and enable
4. target2 disconnect
5. disable DHCP server and enable
6. PC NIC connect to target1 softap
7. softap list connected station
sub module: DHCP
summary: dhcp server reconfig and new client able to get first IP in pool
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0209
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '2/3'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - DELAY 20
- - ''
- - SSC SSC1 ap -L
- - R SSC1 C 192.168.4.2 C 192.168.4.3 P <pc_wifi_nic_mac> P <target2_mac>
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. find target2 and PC
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1 softap
3. disable DHCP server, do config and enable
4. PC NIC connect to target1 softap
5. softap list connected station
sub module: DHCP
summary: dhcp server reconfig, old client and new client able to get IP
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0210
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '1/2'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - WIFI <pc_wifi_nic> CONN2 <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC1 ap -L
- - R SSC1 C 192.168.4.2 C 192.168.4.3 P <pc_wifi_nic_mac> P <target2_mac>
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. find target2 and PC
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1 softap
3. disable DHCP server, do config and enable
4. PC NIC connect to target1 softap try to renew IP 192.168.4.2
5. softap list connected station
sub module: DHCP
summary: dhcp server reconfig, old client able to get IP (discover with requested
IP)
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0211
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: '1/2'
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <random_string> -p <random_string> -t 4
- - R SSC1 C +SAP:OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.100
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - WIFI <pc_wifi_nic> CONN <random_string> <random_string> 192.168.4.2
- - R PC_COM NC ERROR C +WIFICONN:OK
- - SSC SSC2 sta -C -s <random_string> -p <random_string>
- - R SSC2 C +JAP:CONNECTED
- - DELAY 30
- - ''
- - SSC SSC1 ap -L
- - R SSC1 C 192.168.4.2 C 192.168.4.3 P <pc_wifi_nic_mac> P <target2_mac>
execution time: 0.0
expected result: |-
1. succeed
2. succeed
3. succeed
4. succeed
5. find target2 and PC
initial condition: T2_1
level: Integration
module: TCPIP
steps: |-
1. config softap to a random ssid
2. target2 connect to target1 softap
3. disable DHCP server, do config and enable
4. PC NIC connect to target1 softap try to renew IP 192.168.4.2
5. softap list connected station
sub module: DHCP
summary: dhcp server reconfig, old client able to renew IP (direct send request)
test environment: SSC_T2_2
test point 1: basic function
test point 2: DHCP server function test
version: v1 (2016-8-15)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0212
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - R SSC1 C +SAP:OK
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - ''
- - DELAY 20
- - P PC_COM C +DELAYDONE
- P SSC2 NC +JAP:CONNECTED
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - R SSC2 C +JAP:CONNECTED
execution time: 0.0
expected result: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target
1,FAIL \n4.target1 打开DHCP OK\n5.target2 jap target 1,ok"
initial condition: T2_1
level: Integration
module: TCPIP
steps: "1.target1 set AP OK \n2.target1 关闭DHCP OK\n3.target2 jap target 1,FAIL \n4.target1
打开DHCP OK\n5.target2 jap target 1,ok"
sub module: DHCP
summary: dhcp server function test
test environment: SSC_T2_5
test point 1: basic function
test point 2: DHCP server function test
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0301
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 dhcp -E -o 1
- - R SSC1 C +DHCP:STA,OK
- - SSC SSC1 ip -S -i 192.168.123.123 -o 1
- - R SSC1 C +IP:OK
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - R SSC1 C +JAP:CONNECTED
- - SSC SSC1 ip -S -i 0.0.0.0 -o 1
- - R SSC1 C +IP
- - SSC SSC1 sta -C -s <ap_ssid> -p <ap_password>
- - ''
- - DELAY 10
- - P PC_COM C +DELAYDONE
- P SSC1 NC +JAP:CONNECTED
execution time: 0.0
expected result: |-
1.OK
2.OK
3.JAP CONNETED
4.OK
5.等待10sJAP fail
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1.target1 关闭DHCP 1
2.target1 设置sta ip 192.168.123.123
4.target1 jap AP
5.target1 设置sta ip 0.0.0.0
6.target1 jap AP
sub module: DHCP
summary: sta dhcp static ip interaction
test environment: SSC_T1_5
test point 1: interaction
test point 2: static IP and DHCP interaction test
version: v2 (2016-10-19)
- CI ready: 'Yes'
ID: TCPIP_DHCP_0302
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
allow fail: ''
auto test: 'Yes'
category: Function
cmd set:
- ''
- - SSC SSC1 dhcp -S -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 ip -S -i 192.168.123.123 -o 2
- - R SSC1 C +IP:ERROR
- - SSC SSC1 dhcp -L -s 192.168.2.2 -e 192.168.2.10
- - R SSC1 C +DHCP:LEASE,ERROR
- - SSC SSC1 ap -S -s <target_ssid> -p <target_password> -t <target_auth_enum>
- - ''
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - P SSC2 C +JAP:CONNECTED
- - SSC SSC1 dhcp -E -o 2
- - R SSC1 C +DHCP:AP,OK
- - SSC SSC1 ip -S -i 192.168.4.1 -o 2
- - R SSC1 C +IP:OK
- - SSC SSC1 dhcp -L -s 192.168.4.2 -e 192.168.4.10
- - R SSC1 C +DHCP:LEASE,OK
- - SSC SSC2 sta -C -s <target_ssid> -p <target_password>
- - ''
- - DELAY 10
- - P PC_COM C +DELAYDONE
- P SSC2 NC +JAP:CONNECTED
execution time: 0.0
expected result: |-
1.target 1 OK
2.target1 ERROR
3.target1 ERROR
4.target2 jap target1 OK
5.target1 OK
6.target1 OK
7.target1 OK
8.target2 jap target1 OK
initial condition: T2_1
level: Integration
module: TCPIP
steps: "1.target1 打开DHCP 2\n2.target1 设置softAP ip 192.168.123.123\n3.target1 设置地址池\n4.target1下设置ssid
和pwd 加密方式\n5.target2 连接target1 \n6.target1 关闭DHCP 2\n7.target1 设置softAP ip \n8.target1
设置正确的地址池\n9.target2 连接target1 "
sub module: DHCP
summary: ap dhcp static ip interaction
test environment: SSC_T2_5
test point 1: interaction
test point 2: static IP and DHCP interaction test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_DHCP_5001
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'Yes'
category: Stress
cmd set:
- WiFiStress/SoftAPNSTA
- - sta_num = 4
- - dummy
- - max_sta = 3
- - ''
- - test_time = 300
- - ''
- - delay1 = [5, 60]
- - ''
- - delay2 = [1, 10]
- - ''
- - change_mac = False
- - ''
- - channel = 11
- - ''
execution time: 5.0
expected result: "1. succeed\n2. succeed\n3. JAP succeed except: \nsoftap reach
max connected AP \nor all address in dhcp pool not available"
initial condition: None
level: Integration
module: TCPIP
steps: |-
1. 1 target set to softap mode and rest set to sta mode
2. set a short dhcp server lease time
2. all sta set random mac, random join and disconnect from softap
Loop step 2
sub module: DHCP
summary: max sta connect to SotfAP and disconnect, sta number more than sta allowed
test environment: SSC_T5_1
test point 1: stress
test point 2: DHCP server stress test
version: v1 (2016-8-15)
- CI ready: 'No'
ID: TCPIP_DHCP_5101
SDK: |-
8266_NonOS
8266_RTOS
ESP32_IDF
Test App: SSC
auto test: 'No'
category: IOT
cmd set: ''
execution time: 0.1
expected result: |-
2. 成功
3. 成功
4. 断开连接并开始重连
5. WIFI连上但无法获取 IP等大概1分钟后发生 DHCP TIMEOUT断开连接并重连成功获取到 IP
initial condition: STAM1
level: Integration
module: TCPIP
steps: |-
1. 使用小米路由器青春版进行测试
2. 设置DHCP timeoutdhcp -T -n 6
3. target 连上 AP
4. 路由器断电
5. 路由器上电
sub module: DHCP
summary: DHCP timeout test on sepcial router
test environment: SSC_T1_IOT1
test point 1: interoperability
test point 2: DHCP timeout test
version: v1 (2016-8-15)