alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
35251a69eb
esp-idf/examples/protocols/static_ip
History
Ondrej Kosta dd81b56fb6 feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 
Updated examples to be able to build for C5 and P4.

Added Ethernet support for static_ip example.
2024-08-14 10:07:48 +02:00
..
main feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
pytest_static_ip.py feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
README.md feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
sdkconfig.ci.default_ip101 feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
sdkconfig.defaults feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
sdkconfig.defaults.esp32h2 feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00
sdkconfig.defaults.esp32p4 feat(esp_eth): removed disable of C5 and P4 from examples .build-test-rules 2024-08-14 10:07:48 +02:00

README.md

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C5 ESP32-C6 ESP32-H2 ESP32-P4 ESP32-S2 ESP32-S3

Static IP Example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example demonstrates how to configure static IP address on ESP32 family devices.

How to use example

Configure the project

idf.py menuconfig

At first, decide if you want to use the example with WiFi or Ethernet network interface. Note that the example is designed to support only one network interface at a time.

  • Set WiFi SSID and WiFi Password and Maximal retry under WiFi Example Configuration Options, if you are planning to use WiFi to connect to the network.

  • Or configure Internal EMAC or SPI Ethernet under Ethernet Configuration Option based on your actual hardware configuration, if you are planning to use Ethernet to connect to the network.

Set following parameters under Example Configuration Options which are common for both network interfaces:

  • Set Static IP address of your device static IP.

  • Set Static netmask address of your device static netmask address.

  • Set Static gateway address of your device static gateway address.

  • Set Choose DNS server with Set manual value as DNS server or Use gateway address as DNS server to configure your DNS server.

  • Choose Set manual value as DNS server to configure manual DNS server with Main DNS server address and Backup DNS server address.

  • Set Enable DNS resolve test to resolve your host which input in Domain name to resolve.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

Note that the output, in particular the order of the output, may vary depending on the environment.

Console output if station connects to AP successfully:

I (563) static_ip: ESP_WIFI_MODE_STA
I (573) wifi:wifi driver task: 3ffc1bfc, prio:23, stack:6656, core=0
I (573) system_api: Base MAC address is not set
I (573) system_api: read default base MAC address from EFUSE
I (603) wifi:wifi firmware version: 6b2834e
I (603) wifi:wifi certification version: v7.0
I (603) wifi:config NVS flash: enabled
I (603) wifi:config nano formatting: disabled
I (613) wifi:Init data frame dynamic rx buffer num: 32
I (613) wifi:Init management frame dynamic rx buffer num: 32
I (623) wifi:Init management short buffer num: 32
I (623) wifi:Init dynamic tx buffer num: 32
I (633) wifi:Init static rx buffer size: 1600
I (633) wifi:Init static rx buffer num: 10
I (643) wifi:Init dynamic rx buffer num: 32
I (643) wifi_init: rx ba win: 6
I (643) wifi_init: tcpip mbox: 32
I (653) wifi_init: udp mbox: 6
I (653) wifi_init: tcp mbox: 6
I (653) wifi_init: tcp tx win: 5744
I (663) wifi_init: tcp rx win: 5744
I (663) wifi_init: tcp mss: 1440
I (673) wifi_init: WiFi IRAM OP enabled
I (673) wifi_init: WiFi RX IRAM OP enabled
I (723) phy_init: phy_version 4660,0162888,Dec 23 2020
W (723) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration
I (1093) wifi:mode : sta (4c:11:ae:ea:69:fc)
I (1093) wifi:enable tsf
I (1093) static_ip: wifi_init_sta finished.
I (2313) wifi:new:<11,0>, old:<1,0>, ap:<255,255>, sta:<11,0>, prof:1
I (3053) wifi:state: init -> auth (b0)
I (3083) wifi:state: auth -> assoc (0)
I (3213) wifi:new:<11,2>, old:<11,0>, ap:<255,255>, sta:<11,2>, prof:1
I (3213) wifi:state: assoc -> run (10)
I (3233) wifi:connected with myssid, aid = 2, channel 11, 40D, bssid = 34:29:12:43:c5:40
I (3233) wifi:security: WPA2-PSK, phy: bgn, rssi: -7
I (3243) wifi:pm start, type: 1

I (3253) esp_netif_handlers: sta ip: 192.168.4.2, mask: 255.255.255.0, gw: 192.168.4.1
I (3253) static_ip: static ip:192.168.4.2
I (3253) static_ip: connected to ap SSID:myssid password:mypassword
W (3273) wifi:<ba-add>idx:0 (ifx:0, 34:29:12:43:c5:40), tid:5, ssn:2, winSize:64
I (3303) wifi:AP's beacon interval = 102400 us, DTIM period = 1
I (3303) wifi:new:<11,0>, old:<11,2>, ap:<255,255>, sta:<11,0>, prof:1
I (5203) static_ip: Resolved IPv4 address: 119.9.92.99