esp-idf/components/usb/hub.c

741 lines
27 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <sys/queue.h>
#include "freertos/FreeRTOS.h"
#include "freertos/portmacro.h"
#include "esp_err.h"
#include "esp_heap_caps.h"
#include "esp_log.h"
#include "usb_private.h"
#include "hcd.h"
#include "hub.h"
#include "usb/usb_helpers.h"
#if ENABLE_USB_HUBS
#include "ext_hub.h"
#endif // ENABLE_USB_HUBS
/*
Implementation of the HUB driver that only supports the Root Hub with a single port. Therefore, we currently don't
implement the bare minimum to control the root HCD port.
*/
#define HUB_ROOT_PORT_NUM 1 // HCD only supports one port
#define HUB_ROOT_DEV_UID 1 // Unique device ID
#ifdef CONFIG_USB_HOST_HW_BUFFER_BIAS_IN
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_RX
#elif CONFIG_USB_HOST_HW_BUFFER_BIAS_PERIODIC_OUT
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_PTX
#else // CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED
#define HUB_ROOT_HCD_PORT_FIFO_BIAS HCD_PORT_FIFO_BIAS_BALANCED
#endif
#define PORT_REQ_DISABLE 0x01
#define PORT_REQ_RECOVER 0x02
/**
* @brief Hub driver action flags
*/
typedef enum {
HUB_DRIVER_ACTION_ROOT_EVENT = (1 << 0),
HUB_DRIVER_ACTION_ROOT_REQ = (1 << 1),
#if ENABLE_USB_HUBS
HUB_DRIVER_ACTION_EXT_HUB = (1 << 6),
HUB_DRIVER_ACTION_EXT_PORT = (1 << 7)
#endif // ENABLE_USB_HUBS
} hub_flag_action_t;
/**
* @brief Root port states
*/
typedef enum {
ROOT_PORT_STATE_NOT_POWERED, /**< Root port initialized and/or not powered */
ROOT_PORT_STATE_POWERED, /**< Root port is powered, device is not connected */
ROOT_PORT_STATE_DISABLED, /**< A device is connected but is disabled (i.e., not reset, no SOFs are sent) */
ROOT_PORT_STATE_ENABLED, /**< A device is connected, port has been reset, SOFs are sent */
ROOT_PORT_STATE_RECOVERY, /**< Root port encountered an error and needs to be recovered */
} root_port_state_t;
/**
* @brief Hub device tree node
*
* Object type of a node in the USB device tree that is maintained by the Hub driver
*/
struct dev_tree_node_s {
TAILQ_ENTRY(dev_tree_node_s) tailq_entry; /**< Entry for the device tree node object tailq */
unsigned int uid; /**< Device's unique ID */
usb_device_handle_t parent_dev_hdl; /**< Device's parent handle */
uint8_t parent_port_num; /**< Device's parent port number */
};
typedef struct dev_tree_node_s dev_tree_node_t;
typedef struct {
struct {
union {
struct {
hub_flag_action_t actions: 8; /**< Hub actions */
uint32_t reserved24: 24; /**< Reserved */
};
uint32_t val; /**< Hub flag action value */
} flags; /**< Hub flags */
root_port_state_t root_port_state; /**< Root port state */
unsigned int port_reqs; /**< Root port request flag */
} dynamic; /**< Dynamic members. Require a critical section */
struct {
TAILQ_HEAD(tailhead_devs, dev_tree_node_s) dev_nodes_tailq; /**< Tailq of attached devices */
unsigned int next_uid; /**< Unique ID for next upcoming device */
} single_thread; /**< Single thread members don't require a critical section so long as they are never accessed from multiple threads */
struct {
hcd_port_handle_t root_port_hdl; /**< Root port HCD handle */
usb_proc_req_cb_t proc_req_cb; /**< Process request callback */
void *proc_req_cb_arg; /**< Process request callback argument */
hub_event_cb_t event_cb; /**< Hub Driver event callback */
void *event_cb_arg; /**< Event callback argument */
} constant; /**< Constant members. Do not change after installation thus do not require a critical section or mutex */
} hub_driver_t;
static hub_driver_t *p_hub_driver_obj = NULL;
static portMUX_TYPE hub_driver_lock = portMUX_INITIALIZER_UNLOCKED;
const char *HUB_DRIVER_TAG = "HUB";
#define HUB_DRIVER_ENTER_CRITICAL_ISR() portENTER_CRITICAL_ISR(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL_ISR() portEXIT_CRITICAL_ISR(&hub_driver_lock)
#define HUB_DRIVER_ENTER_CRITICAL() portENTER_CRITICAL(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL() portEXIT_CRITICAL(&hub_driver_lock)
#define HUB_DRIVER_ENTER_CRITICAL_SAFE() portENTER_CRITICAL_SAFE(&hub_driver_lock)
#define HUB_DRIVER_EXIT_CRITICAL_SAFE() portEXIT_CRITICAL_SAFE(&hub_driver_lock)
#define HUB_DRIVER_CHECK(cond, ret_val) ({ \
if (!(cond)) { \
return (ret_val); \
} \
})
#define HUB_DRIVER_CHECK_FROM_CRIT(cond, ret_val) ({ \
if (!(cond)) { \
HUB_DRIVER_EXIT_CRITICAL(); \
return ret_val; \
} \
})
// ------------------------------------------------- Forward Declare ---------------------------------------------------
/**
* @brief HCD port callback for the root port
*
* - This callback is called from the context of the HCD, so any event handling should be deferred to hub_process()
* - Under the current HCD implementation, this callback should only be ever be called in an ISR
* - This callback needs to call proc_req_cb to ensure that hub_process() gets a chance to run
*
* @param port_hdl HCD port handle
* @param port_event HCD port event
* @param user_arg Callback argument
* @param in_isr Whether callback is in an ISR context
* @return Whether a yield is required
*/
static bool root_port_callback(hcd_port_handle_t port_hdl, hcd_port_event_t port_event, void *user_arg, bool in_isr);
// ---------------------- Internal Logic ------------------------
/**
* @brief Creates new device tree node and propagate HUB_EVENT_CONNECTED event
*
* @return esp_err_t
*/
static esp_err_t new_dev_tree_node(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num, usb_speed_t speed)
{
esp_err_t ret;
unsigned int node_uid = p_hub_driver_obj->single_thread.next_uid;
dev_tree_node_t *dev_tree_node = heap_caps_calloc(1, sizeof(dev_tree_node_t), MALLOC_CAP_DEFAULT);
if (dev_tree_node == NULL) {
return ESP_ERR_NO_MEM;
}
// Allocate a new USBH device
usbh_dev_params_t params = {
.uid = node_uid,
.speed = speed,
.root_port_hdl = p_hub_driver_obj->constant.root_port_hdl, // Always the same for all devices
// TODO: IDF-10023 Move responsibility of parent-child tree building to Hub Driver instead of USBH
.parent_dev_hdl = parent_dev_hdl,
.parent_port_num = parent_port_num,
};
ret = usbh_devs_add(&params);
if (ret != ESP_OK) {
// USBH devs add could failed due to lack of free hcd channels
// TODO: IDF-10044 Hub should recover after running out of hcd channels
goto fail;
}
dev_tree_node->uid = node_uid;
dev_tree_node->parent_dev_hdl = parent_dev_hdl;
dev_tree_node->parent_port_num = parent_port_num;
TAILQ_INSERT_TAIL(&p_hub_driver_obj->single_thread.dev_nodes_tailq, dev_tree_node, tailq_entry);
p_hub_driver_obj->single_thread.next_uid++;
if (p_hub_driver_obj->single_thread.next_uid == 0) {
ESP_LOGW(HUB_DRIVER_TAG, "Counter overflowed, possibility of uid collisions");
p_hub_driver_obj->single_thread.next_uid = HUB_ROOT_DEV_UID;
}
// Verify presence of a device with newly prepared uid in USBH
// TODO: IDF-10022 Provide a mechanism to request presence status of a device with uid in USBH device object list
// Return if device uid is not in USBH device object list, repeat until uid will be founded
ESP_LOGD(HUB_DRIVER_TAG, "New device tree node (uid=%d)", node_uid);
hub_event_data_t event_data = {
.event = HUB_EVENT_CONNECTED,
.connected = {
.uid = node_uid,
},
};
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
return ret;
fail:
heap_caps_free(dev_tree_node);
return ret;
}
static esp_err_t dev_tree_node_reset_completed(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
dev_tree_node_t *dev_tree_node = NULL;
dev_tree_node_t *dev_tree_iter;
// Search the device tree nodes list for a device node with the specified parent
TAILQ_FOREACH(dev_tree_iter, &p_hub_driver_obj->single_thread.dev_nodes_tailq, tailq_entry) {
if (dev_tree_iter->parent_dev_hdl == parent_dev_hdl &&
dev_tree_iter->parent_port_num == parent_port_num) {
dev_tree_node = dev_tree_iter;
break;
}
}
if (dev_tree_node == NULL) {
ESP_LOGE(HUB_DRIVER_TAG, "Reset completed, but device tree node with port=%d not found", parent_port_num);
return ESP_ERR_NOT_FOUND;
}
hub_event_data_t event_data = {
.event = HUB_EVENT_RESET_COMPLETED,
.reset_completed = {
.uid = dev_tree_node->uid,
},
};
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
return ESP_OK;
}
static esp_err_t dev_tree_node_dev_gone(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
dev_tree_node_t *dev_tree_node = NULL;
dev_tree_node_t *dev_tree_iter;
// Search the device tree nodes list for a device node with the specified parent
TAILQ_FOREACH(dev_tree_iter, &p_hub_driver_obj->single_thread.dev_nodes_tailq, tailq_entry) {
if (dev_tree_iter->parent_dev_hdl == parent_dev_hdl &&
dev_tree_iter->parent_port_num == parent_port_num) {
dev_tree_node = dev_tree_iter;
break;
}
}
if (dev_tree_node == NULL) {
ESP_LOGE(HUB_DRIVER_TAG, "Device tree node with port=%d not found", parent_port_num);
return ESP_ERR_NOT_FOUND;
}
ESP_LOGD(HUB_DRIVER_TAG, "Device tree node (uid=%d): device gone", dev_tree_node->uid);
hub_event_data_t event_data = {
.event = HUB_EVENT_DISCONNECTED,
.disconnected = {
.uid = dev_tree_node->uid,
},
};
p_hub_driver_obj->constant.event_cb(&event_data, p_hub_driver_obj->constant.event_cb_arg);
return ESP_OK;
}
/**
* @brief Frees device tree node
*
* @return esp_err_t
*/
static esp_err_t dev_tree_node_remove_by_parent(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
dev_tree_node_t *dev_tree_node = NULL;
dev_tree_node_t *dev_tree_iter;
// Search the device tree nodes list for a device node with the specified parent
TAILQ_FOREACH(dev_tree_iter, &p_hub_driver_obj->single_thread.dev_nodes_tailq, tailq_entry) {
if (dev_tree_iter->parent_dev_hdl == parent_dev_hdl &&
dev_tree_iter->parent_port_num == parent_port_num) {
dev_tree_node = dev_tree_iter;
break;
}
}
if (dev_tree_node == NULL) {
ESP_LOGE(HUB_DRIVER_TAG, "Device tree node with port=%d not found", parent_port_num);
return ESP_ERR_NOT_FOUND;
}
ESP_LOGD(HUB_DRIVER_TAG, "Device tree node freeing (uid=%d)", dev_tree_node->uid);
TAILQ_REMOVE(&p_hub_driver_obj->single_thread.dev_nodes_tailq, dev_tree_node, tailq_entry);
heap_caps_free(dev_tree_node);
return ESP_OK;
}
// ---------------------- Callbacks ------------------------
static bool root_port_callback(hcd_port_handle_t port_hdl, hcd_port_event_t port_event, void *user_arg, bool in_isr)
{
HUB_DRIVER_ENTER_CRITICAL_SAFE();
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_ACTION_ROOT_EVENT;
HUB_DRIVER_EXIT_CRITICAL_SAFE();
assert(in_isr); // Currently, this callback should only ever be called from an ISR context
return p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, in_isr, p_hub_driver_obj->constant.proc_req_cb_arg);
}
#ifdef ENABLE_USB_HUBS
static bool ext_hub_callback(bool in_isr, void *user_arg)
{
HUB_DRIVER_ENTER_CRITICAL_SAFE();
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_ACTION_EXT_HUB;
HUB_DRIVER_EXIT_CRITICAL_SAFE();
return p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, in_isr, p_hub_driver_obj->constant.proc_req_cb_arg);
}
#endif // ENABLE_USB_HUBS
// ---------------------- Handlers -------------------------
static void root_port_handle_events(hcd_port_handle_t root_port_hdl)
{
hcd_port_event_t port_event = hcd_port_handle_event(root_port_hdl);
switch (port_event) {
case HCD_PORT_EVENT_NONE:
// Nothing to do
break;
case HCD_PORT_EVENT_CONNECTION: {
if (hcd_port_command(root_port_hdl, HCD_PORT_CMD_RESET) != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Root port reset failed");
goto reset_err;
}
ESP_LOGD(HUB_DRIVER_TAG, "Root port reset");
usb_speed_t speed;
if (hcd_port_get_speed(p_hub_driver_obj->constant.root_port_hdl, &speed) != ESP_OK) {
goto new_dev_err;
}
if (new_dev_tree_node(NULL, 0, speed) != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Failed to add new device");
goto new_dev_err;
}
// Change Port state
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_ENABLED;
HUB_DRIVER_EXIT_CRITICAL();
break;
new_dev_err:
// We allow this to fail in case a disconnect/port error happens while disabling.
hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_DISABLE);
reset_err:
break;
}
case HCD_PORT_EVENT_DISCONNECTION:
case HCD_PORT_EVENT_ERROR:
case HCD_PORT_EVENT_OVERCURRENT: {
bool port_has_device = false;
HUB_DRIVER_ENTER_CRITICAL();
switch (p_hub_driver_obj->dynamic.root_port_state) {
case ROOT_PORT_STATE_POWERED: // This occurred before enumeration
case ROOT_PORT_STATE_DISABLED: // This occurred after the device has already been disabled
// Therefore, there's no device object to clean up, and we can go straight to port recovery
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_RECOVER;
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_ACTION_ROOT_REQ;
break;
case ROOT_PORT_STATE_ENABLED:
// There is an enabled (active) device. We need to indicate to USBH that the device is gone
port_has_device = true;
break;
default:
abort(); // Should never occur
break;
}
HUB_DRIVER_EXIT_CRITICAL();
if (port_has_device) {
ESP_ERROR_CHECK(dev_tree_node_dev_gone(NULL, 0));
}
break;
}
default:
abort(); // Should never occur
break;
}
}
static void root_port_req(hcd_port_handle_t root_port_hdl)
{
unsigned int port_reqs;
HUB_DRIVER_ENTER_CRITICAL();
port_reqs = p_hub_driver_obj->dynamic.port_reqs;
p_hub_driver_obj->dynamic.port_reqs = 0;
HUB_DRIVER_EXIT_CRITICAL();
if (port_reqs & PORT_REQ_DISABLE) {
ESP_LOGD(HUB_DRIVER_TAG, "Disabling root port");
// We allow this to fail in case a disconnect/port error happens while disabling.
hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_DISABLE);
}
if (port_reqs & PORT_REQ_RECOVER) {
ESP_LOGD(HUB_DRIVER_TAG, "Recovering root port");
ESP_ERROR_CHECK(hcd_port_recover(p_hub_driver_obj->constant.root_port_hdl));
ESP_ERROR_CHECK(hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_ON));
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
}
static esp_err_t root_port_recycle(void)
{
// Device is free, we can now request its port be recycled
hcd_port_state_t port_state = hcd_port_get_state(p_hub_driver_obj->constant.root_port_hdl);
HUB_DRIVER_ENTER_CRITICAL();
// How the port is recycled will depend on the port's state
switch (port_state) {
case HCD_PORT_STATE_ENABLED:
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_DISABLE;
break;
case HCD_PORT_STATE_RECOVERY:
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_RECOVER;
break;
default:
abort(); // Should never occur
break;
}
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_ACTION_ROOT_REQ;
HUB_DRIVER_EXIT_CRITICAL();
ESP_ERROR_CHECK(dev_tree_node_remove_by_parent(NULL, 0));
p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, false, p_hub_driver_obj->constant.proc_req_cb_arg);
return ESP_OK;
}
static esp_err_t root_port_disable(void)
{
hcd_port_state_t port_state = hcd_port_get_state(p_hub_driver_obj->constant.root_port_hdl);
HUB_DRIVER_CHECK(port_state == HCD_PORT_STATE_ENABLED, ESP_ERR_INVALID_STATE);
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.port_reqs |= PORT_REQ_DISABLE;
p_hub_driver_obj->dynamic.flags.actions |= HUB_DRIVER_ACTION_ROOT_REQ;
HUB_DRIVER_EXIT_CRITICAL();
p_hub_driver_obj->constant.proc_req_cb(USB_PROC_REQ_SOURCE_HUB, false, p_hub_driver_obj->constant.proc_req_cb_arg);
return ESP_OK;
}
// ---------------------------------------------- Hub Driver Functions -------------------------------------------------
esp_err_t hub_install(hub_config_t *hub_config, void **client_ret)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj == NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
// Allocate Hub driver object
hub_driver_t *hub_driver_obj = heap_caps_calloc(1, sizeof(hub_driver_t), MALLOC_CAP_DEFAULT);
if (hub_driver_obj == NULL) {
return ESP_ERR_NO_MEM;
}
#if ENABLE_USB_HUBS
// Install External HUB driver
ext_hub_config_t ext_hub_config = {
.proc_req_cb = ext_hub_callback,
.port_driver = NULL,
};
ret = ext_hub_install(&ext_hub_config);
if (ret != ESP_OK) {
goto err_ext_hub;
}
*client_ret = ext_hub_get_client();
#else
*client_ret = NULL;
#endif // ENABLE_USB_HUBS
// Install HCD port
hcd_port_config_t port_config = {
.fifo_bias = HUB_ROOT_HCD_PORT_FIFO_BIAS,
.callback = root_port_callback,
.callback_arg = NULL,
.context = NULL,
};
hcd_port_handle_t root_port_hdl;
ret = hcd_port_init(HUB_ROOT_PORT_NUM, &port_config, &root_port_hdl);
if (ret != ESP_OK) {
goto err;
}
// Initialize Hub driver object
hub_driver_obj->constant.root_port_hdl = root_port_hdl;
hub_driver_obj->constant.proc_req_cb = hub_config->proc_req_cb;
hub_driver_obj->constant.proc_req_cb_arg = hub_config->proc_req_cb_arg;
hub_driver_obj->constant.event_cb = hub_config->event_cb;
hub_driver_obj->constant.event_cb_arg = hub_config->event_cb_arg;
hub_driver_obj->single_thread.next_uid = HUB_ROOT_DEV_UID;
TAILQ_INIT(&hub_driver_obj->single_thread.dev_nodes_tailq);
// Driver is not installed, we can modify dynamic section outside of the critical section
hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_NOT_POWERED;
HUB_DRIVER_ENTER_CRITICAL();
if (p_hub_driver_obj != NULL) {
HUB_DRIVER_EXIT_CRITICAL();
ret = ESP_ERR_INVALID_STATE;
goto assign_err;
}
p_hub_driver_obj = hub_driver_obj;
HUB_DRIVER_EXIT_CRITICAL();
return ret;
assign_err:
ESP_ERROR_CHECK(hcd_port_deinit(root_port_hdl));
err:
#if ENABLE_USB_HUBS
ext_hub_uninstall();
err_ext_hub:
#endif // ENABLE_USB_HUBS
heap_caps_free(hub_driver_obj);
return ret;
}
esp_err_t hub_uninstall(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state == ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
hub_driver_t *hub_driver_obj = p_hub_driver_obj;
p_hub_driver_obj = NULL;
HUB_DRIVER_EXIT_CRITICAL();
#if ENABLE_USB_HUBS
ESP_ERROR_CHECK(ext_hub_uninstall());
#endif // ENABLE_USB_HUBS
ESP_ERROR_CHECK(hcd_port_deinit(hub_driver_obj->constant.root_port_hdl));
// Free Hub driver resources
heap_caps_free(hub_driver_obj);
return ESP_OK;
}
esp_err_t hub_root_start(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state == ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
// Power ON the root port
esp_err_t ret;
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_ON);
if (ret == ESP_OK) {
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
return ret;
}
esp_err_t hub_root_stop(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj->dynamic.root_port_state != ROOT_PORT_STATE_NOT_POWERED, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_POWER_OFF);
if (ret == ESP_OK) {
HUB_DRIVER_ENTER_CRITICAL();
p_hub_driver_obj->dynamic.root_port_state = ROOT_PORT_STATE_NOT_POWERED;
HUB_DRIVER_EXIT_CRITICAL();
}
return ret;
}
esp_err_t hub_port_recycle(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num, unsigned int dev_uid)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
if (parent_port_num == 0) {
ret = root_port_recycle();
} else {
#if ENABLE_USB_HUBS
ext_hub_handle_t ext_hub_hdl = NULL;
ext_hub_get_handle(parent_dev_hdl, &ext_hub_hdl);
ret = ext_hub_port_recycle(ext_hub_hdl, parent_port_num);
#else
ESP_LOGW(HUB_DRIVER_TAG, "Recycling External Port is not available (External Hub support disabled)");
ret = ESP_ERR_NOT_SUPPORTED;
#endif // ENABLE_USB_HUBS
}
return ret;
}
esp_err_t hub_port_reset(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
esp_err_t ret;
if (parent_port_num == 0) {
ret = hcd_port_command(p_hub_driver_obj->constant.root_port_hdl, HCD_PORT_CMD_RESET);
if (ret != ESP_OK) {
ESP_LOGE(HUB_DRIVER_TAG, "Failed to issue root port reset");
} else {
ret = dev_tree_node_reset_completed(NULL, 0);
}
} else {
#if ENABLE_USB_HUBS
ext_hub_handle_t ext_hub_hdl = NULL;
ext_hub_get_handle(parent_dev_hdl, &ext_hub_hdl);
ret = ext_hub_port_reset(ext_hub_hdl, parent_port_num);
#else
ESP_LOGW(HUB_DRIVER_TAG, "Resetting External Port is not available (External Hub support disabled)");
ret = ESP_ERR_NOT_SUPPORTED;
#endif // ENABLE_USB_HUBS
}
return ret;
}
esp_err_t hub_port_active(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
esp_err_t ret;
if (parent_port_num == 0) {
// Root port no need to be activated
ret = ESP_OK;
} else {
#if ENABLE_USB_HUBS
// External Hub port
ext_hub_handle_t ext_hub_hdl = NULL;
ext_hub_get_handle(parent_dev_hdl, &ext_hub_hdl);
ret = ext_hub_port_active(ext_hub_hdl, parent_port_num);
#else
ESP_LOGW(HUB_DRIVER_TAG, "Activating External Port is not available (External Hub support disabled)");
ret = ESP_ERR_NOT_SUPPORTED;
#endif // ENABLE_USB_HUBS
}
return ret;
}
esp_err_t hub_port_disable(usb_device_handle_t parent_dev_hdl, uint8_t parent_port_num)
{
esp_err_t ret;
if (parent_port_num == 0) {
ret = root_port_disable();
} else {
#if ENABLE_USB_HUBS
// External Hub port
ext_hub_handle_t ext_hub_hdl = NULL;
ext_hub_get_handle(parent_dev_hdl, &ext_hub_hdl);
ret = ext_hub_port_disable(ext_hub_hdl, parent_port_num);
#else
ESP_LOGW(HUB_DRIVER_TAG, "Activating External Port is not available (External Hub support disabled)");
ret = ESP_ERR_NOT_SUPPORTED;
#endif // ENABLE_USB_HUBS
}
return ret;
}
#if ENABLE_USB_HUBS
esp_err_t hub_notify_new_dev(uint8_t dev_addr)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
return ext_hub_new_dev(dev_addr);
}
esp_err_t hub_notify_dev_gone(uint8_t dev_addr)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
return ext_hub_dev_gone(dev_addr);
}
esp_err_t hub_notify_all_free(void)
{
HUB_DRIVER_ENTER_CRITICAL();
HUB_DRIVER_CHECK_FROM_CRIT(p_hub_driver_obj != NULL, ESP_ERR_INVALID_STATE);
HUB_DRIVER_EXIT_CRITICAL();
return ext_hub_all_free();
}
#endif // ENABLE_USB_HUBS
esp_err_t hub_process(void)
{
HUB_DRIVER_ENTER_CRITICAL();
uint32_t action_flags = p_hub_driver_obj->dynamic.flags.actions;
p_hub_driver_obj->dynamic.flags.actions = 0;
HUB_DRIVER_EXIT_CRITICAL();
while (action_flags) {
#if ENABLE_USB_HUBS
if (action_flags & HUB_DRIVER_ACTION_EXT_PORT) {
ESP_LOGW(HUB_DRIVER_TAG, "ext_port_process() has not been implemented yet");
/*
ESP_ERROR_CHECK(ext_port_process());
*/
}
if (action_flags & HUB_DRIVER_ACTION_EXT_HUB) {
ESP_ERROR_CHECK(ext_hub_process());
}
#endif // ENABLE_USB_HUBS
if (action_flags & HUB_DRIVER_ACTION_ROOT_EVENT) {
root_port_handle_events(p_hub_driver_obj->constant.root_port_hdl);
}
if (action_flags & HUB_DRIVER_ACTION_ROOT_REQ) {
root_port_req(p_hub_driver_obj->constant.root_port_hdl);
}
HUB_DRIVER_ENTER_CRITICAL();
action_flags = p_hub_driver_obj->dynamic.flags.actions;
p_hub_driver_obj->dynamic.flags.actions = 0;
HUB_DRIVER_EXIT_CRITICAL();
}
return ESP_OK;
}