mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
251 lines
14 KiB
C
251 lines
14 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "esp_err.h"
|
|
#include "esp_lcd_types.h"
|
|
#include "soc/soc_caps.h"
|
|
#include "hal/lcd_types.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#if SOC_LCD_RGB_SUPPORTED
|
|
/**
|
|
* @brief LCD RGB timing structure
|
|
* @verbatim
|
|
* Total Width
|
|
* <--------------------------------------------------->
|
|
* HSYNC width HBP Active Width HFP
|
|
* <---><--><--------------------------------------><--->
|
|
* ____ ____|_______________________________________|____|
|
|
* |___| | | |
|
|
* | | |
|
|
* __| | | |
|
|
* /|\ /|\ | | | |
|
|
* | VSYNC| | | | |
|
|
* |Width\|/ |__ | | |
|
|
* | /|\ | | | |
|
|
* | VBP | | | | |
|
|
* | \|/_____|_________|_______________________________________| |
|
|
* | /|\ | | / / / / / / / / / / / / / / / / / / / | |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* Total | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* Height | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* |Active| | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* |Heigh | | |/ / / / / / Active Display Area / / / /| |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* | | | |/ / / / / / / / / / / / / / / / / / / /| |
|
|
* | \|/_____|_________|_______________________________________| |
|
|
* | /|\ | |
|
|
* | VFP | | |
|
|
* \|/ \|/_____|______________________________________________________|
|
|
* @endverbatim
|
|
*/
|
|
typedef struct {
|
|
uint32_t pclk_hz; /*!< Frequency of pixel clock */
|
|
uint32_t h_res; /*!< Horizontal resolution, i.e. the number of pixels in a line */
|
|
uint32_t v_res; /*!< Vertical resolution, i.e. the number of lines in the frame */
|
|
uint32_t hsync_pulse_width; /*!< Horizontal sync width, unit: PCLK period */
|
|
uint32_t hsync_back_porch; /*!< Horizontal back porch, number of PCLK between hsync and start of line active data */
|
|
uint32_t hsync_front_porch; /*!< Horizontal front porch, number of PCLK between the end of active data and the next hsync */
|
|
uint32_t vsync_pulse_width; /*!< Vertical sync width, unit: number of lines */
|
|
uint32_t vsync_back_porch; /*!< Vertical back porch, number of invalid lines between vsync and start of frame */
|
|
uint32_t vsync_front_porch; /*!< Vertical front porch, number of invalid lines between the end of frame and the next vsync */
|
|
struct {
|
|
uint32_t hsync_idle_low: 1; /*!< The hsync signal is low in IDLE state */
|
|
uint32_t vsync_idle_low: 1; /*!< The vsync signal is low in IDLE state */
|
|
uint32_t de_idle_high: 1; /*!< The de signal is high in IDLE state */
|
|
uint32_t pclk_active_neg: 1; /*!< Whether the display data is clocked out on the falling edge of PCLK */
|
|
uint32_t pclk_idle_high: 1; /*!< The PCLK stays at high level in IDLE phase */
|
|
} flags; /*!< LCD RGB timing flags */
|
|
} esp_lcd_rgb_timing_t;
|
|
|
|
/**
|
|
* @brief Type of RGB LCD panel event data
|
|
*/
|
|
typedef struct {
|
|
} esp_lcd_rgb_panel_event_data_t;
|
|
|
|
/**
|
|
* @brief RGB LCD VSYNC event callback prototype
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @param[in] edata Panel event data, fed by driver
|
|
* @param[in] user_ctx User data, passed from `esp_lcd_rgb_panel_register_event_callbacks()`
|
|
* @return Whether a high priority task has been waken up by this function
|
|
*/
|
|
typedef bool (*esp_lcd_rgb_panel_vsync_cb_t)(esp_lcd_panel_handle_t panel, const esp_lcd_rgb_panel_event_data_t *edata, void *user_ctx);
|
|
|
|
/**
|
|
* @brief Prototype for function to re-fill a bounce buffer, rather than copying from the frame buffer
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @param[in] bounce_buf Bounce buffer to write data into
|
|
* @param[in] pos_px How many pixels already were sent to the display in this frame, in other words,
|
|
* at what pixel the routine should start putting data into bounce_buf
|
|
* @param[in] len_bytes Length, in bytes, of the bounce buffer. Routine should fill this length fully.
|
|
* @param[in] user_ctx Opaque pointer that was passed from `esp_lcd_rgb_panel_register_event_callbacks()`
|
|
* @return Whether a high priority task has been waken up by this function
|
|
*/
|
|
typedef bool (*esp_lcd_rgb_panel_bounce_buf_fill_cb_t)(esp_lcd_panel_handle_t panel, void *bounce_buf, int pos_px, int len_bytes, void *user_ctx);
|
|
|
|
/**
|
|
* @brief Group of supported RGB LCD panel callbacks
|
|
* @note The callbacks are all running under ISR environment
|
|
* @note When CONFIG_LCD_RGB_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
|
|
*/
|
|
typedef struct {
|
|
esp_lcd_rgb_panel_vsync_cb_t on_vsync; /*!< VSYNC event callback */
|
|
esp_lcd_rgb_panel_bounce_buf_fill_cb_t on_bounce_empty; /*!< Bounce buffer empty callback. */
|
|
} esp_lcd_rgb_panel_event_callbacks_t;
|
|
|
|
/**
|
|
* @brief LCD RGB panel configuration structure
|
|
*/
|
|
typedef struct {
|
|
lcd_clock_source_t clk_src; /*!< Clock source for the RGB LCD peripheral */
|
|
esp_lcd_rgb_timing_t timings; /*!< RGB timing parameters, including the screen resolution */
|
|
size_t data_width; /*!< Number of data lines */
|
|
size_t bits_per_pixel; /*!< Frame buffer color depth, in bpp, specially, if set to zero, it will default to `data_width`.
|
|
When using a Serial RGB interface, this value could be different from `data_width` */
|
|
size_t bounce_buffer_size_px; /*!< If it's non-zero, the driver allocates two DRAM bounce buffers for DMA use.
|
|
DMA fetching from DRAM bounce buffer is much faster than PSRAM frame buffer. */
|
|
size_t sram_trans_align; /*!< Alignment of buffers (frame buffer or bounce buffer) that allocated in SRAM */
|
|
size_t psram_trans_align; /*!< Alignment of buffers (frame buffer) that allocated in PSRAM */
|
|
int hsync_gpio_num; /*!< GPIO used for HSYNC signal */
|
|
int vsync_gpio_num; /*!< GPIO used for VSYNC signal */
|
|
int de_gpio_num; /*!< GPIO used for DE signal, set to -1 if it's not used */
|
|
int pclk_gpio_num; /*!< GPIO used for PCLK signal */
|
|
int disp_gpio_num; /*!< GPIO used for display control signal, set to -1 if it's not used */
|
|
int data_gpio_nums[SOC_LCD_RGB_DATA_WIDTH]; /*!< GPIOs used for data lines */
|
|
struct {
|
|
uint32_t disp_active_low: 1; /*!< If this flag is enabled, a low level of display control signal can turn the screen on; vice versa */
|
|
uint32_t refresh_on_demand: 1; /*!< If this flag is enabled, the host only refresh the frame buffer when `esp_lcd_panel_draw_bitmap` is called.
|
|
This is useful when the LCD screen has a GRAM and can refresh the LCD by itself. */
|
|
uint32_t fb_in_psram: 1; /*!< If this flag is enabled, the frame buffer will be allocated from PSRAM, preferentially */
|
|
uint32_t double_fb: 1; /*!< If this flag is enabled, the driver will allocate two screen sized frame buffer */
|
|
uint32_t no_fb: 1; /*!< If this flag is enabled, the driver won't allocate frame buffer.
|
|
Instead, user should fill in the bounce buffer manually in the `on_bounce_empty` callback */
|
|
uint32_t bb_invalidate_cache: 1; /*!< If this flag is enabled, in bounce back mode we'll do a cache invalidate on the read data, freeing the cache.
|
|
Can be dangerous if data is written from other core(s). */
|
|
} flags; /*!< LCD RGB panel configuration flags */
|
|
} esp_lcd_rgb_panel_config_t;
|
|
|
|
/**
|
|
* @brief Create RGB LCD panel
|
|
*
|
|
* @param[in] rgb_panel_config RGB panel configuration
|
|
* @param[out] ret_panel Returned LCD panel handle
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG: Create RGB LCD panel failed because of invalid argument
|
|
* - ESP_ERR_NO_MEM: Create RGB LCD panel failed because of out of memory
|
|
* - ESP_ERR_NOT_FOUND: Create RGB LCD panel failed because some mandatory hardware resources are not found
|
|
* - ESP_OK: Create RGB LCD panel successfully
|
|
*/
|
|
esp_err_t esp_lcd_new_rgb_panel(const esp_lcd_rgb_panel_config_t *rgb_panel_config, esp_lcd_panel_handle_t *ret_panel);
|
|
|
|
/**
|
|
* @brief Register LCD RGB panel event callbacks
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @param[in] callbacks Group of callback functions
|
|
* @param[in] user_ctx User data, which will be passed to the callback functions directly
|
|
* @return
|
|
* - ESP_OK: Set event callbacks successfully
|
|
* - ESP_ERR_INVALID_ARG: Set event callbacks failed because of invalid argument
|
|
* - ESP_FAIL: Set event callbacks failed because of other error
|
|
*/
|
|
esp_err_t esp_lcd_rgb_panel_register_event_callbacks(esp_lcd_panel_handle_t panel, const esp_lcd_rgb_panel_event_callbacks_t *callbacks, void *user_ctx);
|
|
|
|
/**
|
|
* @brief Set frequency of PCLK for RGB LCD panel
|
|
*
|
|
* @note The PCLK frequency is set in the `esp_lcd_rgb_timing_t` and gets configured during LCD panel initialization.
|
|
* Usually you don't need to call this function to set the PCLK again, but in some cases, you might want to change the PCLK frequency.
|
|
* e.g. slow down the PCLK frequency to reduce power consumption or to reduce the memory throughput during OTA.
|
|
* @note This function doesn't cause the hardware to update the PCLK immediately but to record the new frequency and set a flag internally.
|
|
* Only in the next VSYNC event handler, will the driver attempt to update the PCLK frequency.
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @param[in] freq_hz Frequency of pixel clock, in Hz
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG: Set PCLK frequency failed because of invalid argument
|
|
* - ESP_OK: Set PCLK frequency successfully
|
|
*/
|
|
esp_err_t esp_lcd_rgb_panel_set_pclk(esp_lcd_panel_handle_t panel, uint32_t freq_hz);
|
|
|
|
/**
|
|
* @brief Get the address of the frame buffer(s) that allocated by the driver
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @param[in] fb_num Number of frame buffer(s) to get. This value must be the same as the number of the following parameters.
|
|
* @param[out] fb0 Returned address of the frame buffer 0
|
|
* @param[out] ... List of other frame buffer addresses
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG: Get frame buffer address failed because of invalid argument
|
|
* - ESP_OK: Get frame buffer address successfully
|
|
*/
|
|
esp_err_t esp_lcd_rgb_panel_get_frame_buffer(esp_lcd_panel_handle_t panel, uint32_t fb_num, void **fb0, ...);
|
|
|
|
/**
|
|
* @brief Manually trigger once transmission of the frame buffer to the LCD panel
|
|
*
|
|
* @note This function should only be called when the RGB panel is working under the `refresh_on_demand` mode.
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel()`
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG: Start a refresh failed because of invalid argument
|
|
* - ESP_ERR_INVALID_STATE: Start a refresh failed because the LCD panel is not created with the `refresh_on_demand` flag enabled.
|
|
* - ESP_OK: Start a refresh successfully
|
|
*/
|
|
esp_err_t esp_lcd_rgb_panel_refresh(esp_lcd_panel_handle_t panel);
|
|
|
|
/**
|
|
* @brief LCD color conversion profile
|
|
*/
|
|
typedef struct {
|
|
lcd_color_space_t color_space; /*!< Color space of the image */
|
|
lcd_color_range_t color_range; /*!< Color range of the image */
|
|
lcd_yuv_sample_t yuv_sample; /*!< YUV sample format of the image */
|
|
} esp_lcd_color_conv_profile_t;
|
|
|
|
/**
|
|
* @brief Configuration of YUG-RGB conversion
|
|
*/
|
|
typedef struct {
|
|
lcd_yuv_conv_std_t std; /*!< YUV conversion standard: BT601, BT709 */
|
|
esp_lcd_color_conv_profile_t src; /*!< Color conversion profile of the input image */
|
|
esp_lcd_color_conv_profile_t dst; /*!< Color conversion profile of the output image */
|
|
} esp_lcd_yuv_conv_config_t;
|
|
|
|
/**
|
|
* @brief Configure how to convert the color format between RGB and YUV
|
|
*
|
|
* @note Pass in `config` as NULL will disable the RGB-YUV converter.
|
|
* @note The hardware converter can only parse a "packed" storage format, while "planar" and "semi-planar" format is not supported.
|
|
*
|
|
* @param[in] panel LCD panel handle, returned from `esp_lcd_new_rgb_panel`
|
|
* @param[in] config Configuration of RGB-YUV conversion
|
|
* @return
|
|
* - ESP_ERR_INVALID_ARG: Configure RGB-YUV conversion failed because of invalid argument
|
|
* - ESP_ERR_NOT_SUPPORTED: Configure RGB-YUV conversion failed because the conversion mode is not supported by the hardware
|
|
* - ESP_OK: Configure RGB-YUV conversion successfully
|
|
*/
|
|
esp_err_t esp_lcd_rgb_panel_set_yuv_conversion(esp_lcd_panel_handle_t panel, const esp_lcd_yuv_conv_config_t *config);
|
|
|
|
#endif // SOC_LCD_RGB_SUPPORTED
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|