Rahul Tank d86afd82c1 Wifi Prov: Disabled the default support for BLE Encrpytion on characteristics read /write ... By default, disabled the BLE Encrpyption requirement for provisioning characteristic. With this flag enabled, when remote attempts to read and if the ACL link is not encrypted, ESP device will return Insufficient Authentication. It is remote device responsibility to go for link encryption which may result in pairing. Some devices do not proceed for any pairing and just show failure pop-up. Also, user needs to remove bonding on remote phone manually and then try again. This is causing bad user experience. End user can enable it as per their use case.		2022-11-25 14:18:15 +05:30
..
include/wifi_provisioning	provisioning: Fix include for Arduino INADDR_NONE	2022-05-18 19:44:05 +02:00
proto	wifi_prov: Added support for WPA3_PSK and WPA2_WPA3_PSK APs	2022-06-21 11:17:09 +05:30
proto-c	wifi_prov: Added support for WPA3_PSK and WPA2_WPA3_PSK APs	2022-06-21 11:17:09 +05:30
python	wifi_prov: Added support for WPA3_PSK and WPA2_WPA3_PSK APs	2022-06-21 11:17:09 +05:30
src	wifi_provisioning: fix error codes for wifi connect retry	2022-10-21 11:33:12 +05:30
CMakeLists.txt	esp_wifi: support station only mode for code size down	2021-12-06 17:34:56 +08:00
component.mk	esp_wifi: support station only mode for code size down	2021-12-06 17:34:56 +08:00
Kconfig	Wifi Prov: Disabled the default support for BLE Encrpytion on characteristics read /write	2022-11-25 14:18:15 +05:30