esp-idf/examples/wifi/iperf
2022-07-14 08:26:32 +08:00
..
main iperf: added Tx bandwidth limit option 2022-03-22 07:17:40 +00:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
iperf_test.py Added bandwidth limitaion option to iperf test scripts 2022-03-22 07:17:40 +00:00
README.md docs: changes docs supported targets tables 2022-07-14 08:26:32 +08:00
sdkconfig.ci.00 examples: fix sdkconfig warnings 2019-11-21 15:36:06 +01:00
sdkconfig.ci.01 Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
sdkconfig.ci.02 Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
sdkconfig.ci.03 Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
sdkconfig.ci.04 Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
sdkconfig.ci.05 Whitespace: Automated whitespace fixes (large commit) 2020-11-11 07:36:35 +00:00
sdkconfig.ci.06 examples: fix sdkconfig warnings 2019-11-21 15:36:06 +01:00
sdkconfig.ci.07 soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00
sdkconfig.ci.99 test: support multiple targets for iperf example test 2021-05-20 16:58:38 +08:00
sdkconfig.defaults soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32 soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32c2 change esp32c2 iperf sdkconfig_defaults 2022-06-29 14:55:22 +08:00
sdkconfig.defaults.esp32c3 soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32s2 soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00
sdkconfig.defaults.esp32s3 soc: moved kconfig options out of the target component. 2022-04-21 12:09:43 +08:00

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-S2 ESP32-S3

Iperf Example

Note about iperf version

The iperf example doesn't support all features in standard iperf. It's compitable with iperf version 2.x.

Note about 80MHz flash frequency

The iperf can get better throughput if the SPI flash frequency is set to 80MHz, but the system may crash in 80MHz mode for ESP-WROVER-KIT. Removing R140~R145 from the board can fix this issue. Currently the default SPI frequency is set to 40MHz, if you want to change the SPI flash frequency to 80MHz, please make sure R140~R145 are removed from ESP-WROVER-KIT or use ESP32 DevKitC.

Introduction

This example implements the protocol used by the common performance measurement tool iPerf. Performance can be measured between two ESP32s running this example, or between a single ESP32 and a computer running the iPerf tool

Demo steps to test station TCP Tx performance:

  1. Build the iperf example with sdkconfig.defaults, which contains performance test specific configurations

  2. Run the demo as station mode and join the target AP sta ssid password

  3. Run iperf as server on AP side iperf -s -i 3

  4. Run iperf as client on ESP32 side iperf -c 192.168.10.42 -i 3 -t 60

The console output, which is printed by station TCP RX throughput test, looks like:

esp32> sta aptest

I (5325) iperf: sta connecting to 'aptest'

esp32> I (6017) event: ip: 192.168.10.248, mask: 255.255.255.0, gw: 192.168.10.1

esp32> iperf -s -i 3 -t 1000

I (14958) iperf: mode=tcp-server sip=192.168.10.248:5001, dip=0.0.0.0:5001, interval=3, time=1000

Interval Bandwidth

esp32> accept: 192.168.10.42,62958

0- 3 sec 8.43 Mbits/sec

3- 6 sec 36.16 Mbits/sec

6- 9 sec 36.22 Mbits/sec

9- 12 sec 36.44 Mbits/sec

12- 15 sec 36.25 Mbits/sec

15- 18 sec 24.36 Mbits/sec

18- 21 sec 27.79 Mbits/sec

Steps to test station/soft-AP TCP/UDP RX/TX throughput are similar as test steps in station TCP TX.

See the README.md file in the upper level 'examples' directory for more information about examples.