esp-idf/components/esp32/cpu_start.c
Angus Gratton 7c494055e3 esp32: Bootloader wake deep sleep stub
App can contain a stub program resident in RTC fast memory. Bootloader
will load the stub on initial boot. If the device wakes from deep sleep,
the stub is run immediately (before any other data is loaded, etc.)

To implement a custom wake stub, implement a function in your program:

```
void RTC_IRAM_ATTR esp_wake_deep_sleep(void)
{
  esp_default_wake_deep_sleep();
  // other wake logic
}
```

... and it will replace the default implementation.
2016-09-28 11:14:58 +08:00

174 lines
4.8 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include <string.h>
#include "esp_attr.h"
#include "esp_err.h"
#include "rom/ets_sys.h"
#include "rom/uart.h"
#include "soc/cpu.h"
#include "soc/dport_reg.h"
#include "soc/io_mux_reg.h"
#include "soc/rtc_cntl_reg.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "freertos/queue.h"
#include "freertos/portmacro.h"
#include "tcpip_adapter.h"
#include "heap_alloc_caps.h"
#include "sdkconfig.h"
#include "esp_system.h"
#include "esp_spi_flash.h"
#include "nvs_flash.h"
#include "esp_event.h"
#include "esp_spi_flash.h"
#include "esp_ipc.h"
#include "esp_log.h"
#include "esp_deepsleep.h"
void start_cpu0(void) __attribute__((weak, alias("start_cpu0_default")));
void start_cpu0_default(void) IRAM_ATTR;
#if !CONFIG_FREERTOS_UNICORE
static void IRAM_ATTR call_start_cpu1();
void start_cpu1(void) __attribute__((weak, alias("start_cpu1_default")));
void start_cpu1_default(void) IRAM_ATTR;
static bool app_cpu_started = false;
#endif //!CONFIG_FREERTOS_UNICORE
static void do_global_ctors(void);
static void main_task(void* args);
extern void ets_setup_syscalls(void);
extern void app_main(void);
extern int _bss_start;
extern int _bss_end;
extern int _init_start;
extern void (*__init_array_start)(void);
extern void (*__init_array_end)(void);
extern volatile int port_xSchedulerRunning[2];
static const char* TAG = "cpu_start";
/*
* We arrive here after the bootloader finished loading the program from flash. The hardware is mostly uninitialized,
* and the app CPU is in reset. We do have a stack, so we can do the initialization in C.
*/
void IRAM_ATTR call_start_cpu0()
{
//Kill wdt
REG_CLR_BIT(RTC_CNTL_WDTCONFIG0_REG, RTC_CNTL_WDT_FLASHBOOT_MOD_EN);
REG_CLR_BIT(0x6001f048, BIT(14)); //DR_REG_BB_BASE+48
cpu_configure_region_protection();
//Move exception vectors to IRAM
asm volatile (\
"wsr %0, vecbase\n" \
::"r"(&_init_start));
uartAttach();
ets_install_uart_printf();
memset(&_bss_start, 0, (&_bss_end - &_bss_start) * sizeof(_bss_start));
// Initialize heap allocator
heap_alloc_caps_init();
ESP_EARLY_LOGI(TAG, "Pro cpu up.");
#if !CONFIG_FREERTOS_UNICORE
ESP_EARLY_LOGI(TAG, "Starting app cpu, entry point is %p", call_start_cpu1);
SET_PERI_REG_MASK(DPORT_APPCPU_CTRL_B_REG, DPORT_APPCPU_CLKGATE_EN);
CLEAR_PERI_REG_MASK(DPORT_APPCPU_CTRL_C_REG, DPORT_APPCPU_RUNSTALL);
SET_PERI_REG_MASK(DPORT_APPCPU_CTRL_A_REG, DPORT_APPCPU_RESETTING);
CLEAR_PERI_REG_MASK(DPORT_APPCPU_CTRL_A_REG, DPORT_APPCPU_RESETTING);
ets_set_appcpu_boot_addr((uint32_t)call_start_cpu1);
while (!app_cpu_started) {
ets_delay_us(100);
}
#else
ESP_EARLY_LOGI(TAG, "Single core mode");
CLEAR_PERI_REG_MASK(DPORT_APPCPU_CTRL_B_REG, DPORT_APPCPU_CLKGATE_EN);
#endif
ESP_EARLY_LOGI(TAG, "Pro cpu start user code");
start_cpu0();
}
#if !CONFIG_FREERTOS_UNICORE
void IRAM_ATTR call_start_cpu1()
{
asm volatile (\
"wsr %0, vecbase\n" \
::"r"(&_init_start));
cpu_configure_region_protection();
ESP_EARLY_LOGI(TAG, "App cpu up.");
app_cpu_started = 1;
start_cpu1();
}
#endif //!CONFIG_FREERTOS_UNICORE
void start_cpu0_default(void)
{
esp_set_cpu_freq(); // set CPU frequency configured in menuconfig
uart_div_modify(0, (APB_CLK_FREQ << 4) / 115200);
ets_setup_syscalls();
do_global_ctors();
esp_ipc_init();
spi_flash_init();
xTaskCreatePinnedToCore(&main_task, "main",
ESP_TASK_MAIN_STACK, NULL,
ESP_TASK_MAIN_PRIO, NULL, 0);
ESP_LOGI(TAG, "Starting scheduler on PRO CPU.");
vTaskStartScheduler();
}
#if !CONFIG_FREERTOS_UNICORE
void start_cpu1_default(void)
{
// Wait for FreeRTOS initialization to finish on PRO CPU
while (port_xSchedulerRunning[0] == 0) {
;
}
ESP_LOGI(TAG, "Starting scheduler on APP CPU.");
xPortStartScheduler();
}
#endif //!CONFIG_FREERTOS_UNICORE
static void do_global_ctors(void)
{
void (**p)(void);
for (p = &__init_array_end - 1; p >= &__init_array_start; --p) {
(*p)();
}
}
static void main_task(void* args)
{
app_main();
vTaskDelete(NULL);
}