esp-idf/components/mbedtls/port/sha/dma/sha.c
Mahavir Jain 66b718ac82 fix(sha): DMA mode iteration calculation issue for certain data lengths
SHA hardware DMA mode calculation had off-by-one error for specific
input lengths. This was causing last chunk of the input data not being
fed to the hardware accelerator and hence resulting in an incorrect
final result.

Closes: https://github.com/espressif/esp-idf/issues/11915
2023-08-02 04:48:48 +00:00

351 lines
9.9 KiB
C

/*
* ESP hardware accelerated SHA1/256/512 implementation
* based on mbedTLS FIPS-197 compliant version.
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* Additions Copyright (C) 2016-2020, Espressif Systems (Shanghai) PTE Ltd
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
/*
* The SHA-1 standard was published by NIST in 1993.
*
* http://www.itl.nist.gov/fipspubs/fip180-1.htm
*/
#include <string.h>
#include <stdio.h>
#include <sys/lock.h>
#include "esp_log.h"
#include "esp_memory_utils.h"
#include "esp_crypto_lock.h"
#include "esp_attr.h"
#include "soc/lldesc.h"
#include "soc/ext_mem_defs.h"
#include "soc/periph_defs.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "esp_private/periph_ctrl.h"
#include "sys/param.h"
#include "sha/sha_dma.h"
#include "hal/sha_hal.h"
#include "soc/soc_caps.h"
#include "esp_sha_dma_priv.h"
#if CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32s3/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32H2
#include "esp32h2/rom/cache.h"
#elif CONFIG_IDF_TARGET_ESP32C2
#include "esp32c2/rom/cache.h"
#endif
#if SOC_SHA_GDMA
#define SHA_LOCK() esp_crypto_sha_aes_lock_acquire()
#define SHA_RELEASE() esp_crypto_sha_aes_lock_release()
#elif SOC_SHA_CRYPTO_DMA
#define SHA_LOCK() esp_crypto_dma_lock_acquire()
#define SHA_RELEASE() esp_crypto_dma_lock_release()
#endif
const static char *TAG = "esp-sha";
static bool s_check_dma_capable(const void *p);
/* These are static due to:
* * Must be in DMA capable memory, so stack is not a safe place to put them
* * To avoid having to malloc/free them for every DMA operation
*/
static DRAM_ATTR lldesc_t s_dma_descr_input;
static DRAM_ATTR lldesc_t s_dma_descr_buf;
void esp_sha_write_digest_state(esp_sha_type sha_type, void *digest_state)
{
sha_hal_write_digest(sha_type, digest_state);
}
void esp_sha_read_digest_state(esp_sha_type sha_type, void *digest_state)
{
sha_hal_read_digest(sha_type, digest_state);
}
/* Return block size (in bytes) for a given SHA type */
inline static size_t block_length(esp_sha_type type)
{
switch (type) {
case SHA1:
case SHA2_224:
case SHA2_256:
return 64;
#if SOC_SHA_SUPPORT_SHA384
case SHA2_384:
#endif
#if SOC_SHA_SUPPORT_SHA512
case SHA2_512:
#endif
#if SOC_SHA_SUPPORT_SHA512_T
case SHA2_512224:
case SHA2_512256:
case SHA2_512T:
#endif
return 128;
default:
return 0;
}
}
/* Enable SHA peripheral and then lock it */
void esp_sha_acquire_hardware()
{
SHA_LOCK(); /* Released when releasing hw with esp_sha_release_hardware() */
/* Enable SHA and DMA hardware */
#if SOC_SHA_CRYPTO_DMA
periph_module_enable(PERIPH_SHA_DMA_MODULE);
#elif SOC_SHA_GDMA
periph_module_enable(PERIPH_SHA_MODULE);
#endif
}
/* Disable SHA peripheral block and then release it */
void esp_sha_release_hardware()
{
/* Disable SHA and DMA hardware */
#if SOC_SHA_CRYPTO_DMA
periph_module_disable(PERIPH_SHA_DMA_MODULE);
#elif SOC_SHA_GDMA
periph_module_disable(PERIPH_SHA_MODULE);
#endif
SHA_RELEASE();
}
#if SOC_SHA_SUPPORT_SHA512_T
/* The initial hash value for SHA512/t is generated according to the
algorithm described in the TRM, chapter SHA-Accelerator
*/
int esp_sha_512_t_init_hash(uint16_t t)
{
uint32_t t_string = 0;
uint8_t t0, t1, t2, t_len;
if (t == 384) {
ESP_LOGE(TAG, "Invalid t for SHA512/t, t = %u,cannot be 384", t);
return -1;
}
if (t <= 9) {
t_string = (uint32_t)((1 << 23) | ((0x30 + t) << 24));
t_len = 0x48;
} else if (t <= 99) {
t0 = t % 10;
t1 = (t / 10) % 10;
t_string = (uint32_t)((1 << 15) | ((0x30 + t0) << 16) |
(((0x30 + t1) << 24)));
t_len = 0x50;
} else if (t <= 512) {
t0 = t % 10;
t1 = (t / 10) % 10;
t2 = t / 100;
t_string = (uint32_t)((1 << 7) | ((0x30 + t0) << 8) |
(((0x30 + t1) << 16) + ((0x30 + t2) << 24)));
t_len = 0x58;
} else {
ESP_LOGE(TAG, "Invalid t for SHA512/t, t = %u, must equal or less than 512", t);
return -1;
}
sha_hal_sha512_init_hash(t_string, t_len);
return 0;
}
#endif //SOC_SHA_SUPPORT_SHA512_T
/* Hash the input block by block, using non-DMA mode */
static void esp_sha_block_mode(esp_sha_type sha_type, const uint8_t *input, uint32_t ilen,
const uint8_t *buf, uint32_t buf_len, bool is_first_block)
{
size_t blk_len = 0;
size_t blk_word_len = 0;
int num_block = 0;
blk_len = block_length(sha_type);
blk_word_len = blk_len / 4;
num_block = ilen / blk_len;
if (buf_len != 0) {
sha_hal_hash_block(sha_type, buf, blk_word_len, is_first_block);
is_first_block = false;
}
for (int i = 0; i < num_block; i++) {
sha_hal_hash_block(sha_type, input + blk_len * i, blk_word_len, is_first_block);
is_first_block = false;
}
}
static int esp_sha_dma_process(esp_sha_type sha_type, const void *input, uint32_t ilen,
const void *buf, uint32_t buf_len, bool is_first_block);
/* Performs SHA on multiple blocks at a time using DMA
splits up into smaller operations for inputs that exceed a single DMA list
*/
int esp_sha_dma(esp_sha_type sha_type, const void *input, uint32_t ilen,
const void *buf, uint32_t buf_len, bool is_first_block)
{
int ret = 0;
unsigned char *dma_cap_buf = NULL;
if (buf_len > block_length(sha_type)) {
ESP_LOGE(TAG, "SHA DMA buf_len cannot exceed max size for a single block");
return -1;
}
/* DMA cannot access memory in flash, hash block by block instead of using DMA */
if (!s_check_dma_capable(input) && (ilen != 0)) {
esp_sha_block_mode(sha_type, input, ilen, buf, buf_len, is_first_block);
return 0;
}
#if (CONFIG_SPIRAM && SOC_PSRAM_DMA_CAPABLE)
if (esp_ptr_external_ram(input)) {
Cache_WriteBack_Addr((uint32_t)input, ilen);
}
if (esp_ptr_external_ram(buf)) {
Cache_WriteBack_Addr((uint32_t)buf, buf_len);
}
#endif
/* Copy to internal buf if buf is in non DMA capable memory */
if (!s_check_dma_capable(buf) && (buf_len != 0)) {
dma_cap_buf = heap_caps_malloc(sizeof(unsigned char) * buf_len, MALLOC_CAP_8BIT|MALLOC_CAP_DMA|MALLOC_CAP_INTERNAL);
if (dma_cap_buf == NULL) {
ESP_LOGE(TAG, "Failed to allocate buf memory");
ret = -1;
goto cleanup;
}
memcpy(dma_cap_buf, buf, buf_len);
buf = dma_cap_buf;
}
uint32_t dma_op_num;
if (ilen > 0) {
/* Number of DMA operations based on maximum chunk size in single operation */
dma_op_num = (ilen + SOC_SHA_DMA_MAX_BUFFER_SIZE - 1) / SOC_SHA_DMA_MAX_BUFFER_SIZE;
} else {
/* For zero input length, we must allow at-least 1 DMA operation to see
* if there is any pending data that is yet to be copied out */
dma_op_num = 1;
}
/* The max amount of blocks in a single hardware operation is 2^6 - 1 = 63
Thus we only do a single DMA input list + dma buf list,
which is max 3968/64 + 64/64 = 63 blocks */
for (int i = 0; i < dma_op_num; i++) {
int dma_chunk_len = MIN(ilen, SOC_SHA_DMA_MAX_BUFFER_SIZE);
ret = esp_sha_dma_process(sha_type, input, dma_chunk_len, buf, buf_len, is_first_block);
if (ret != 0) {
goto cleanup;
}
ilen -= dma_chunk_len;
input += dma_chunk_len;
// Only append buf to the first operation
buf_len = 0;
is_first_block = false;
}
cleanup:
free(dma_cap_buf);
return ret;
}
/* Performs SHA on multiple blocks at a time */
static esp_err_t esp_sha_dma_process(esp_sha_type sha_type, const void *input, uint32_t ilen,
const void *buf, uint32_t buf_len, bool is_first_block)
{
int ret = 0;
lldesc_t *dma_descr_head;
size_t num_blks = (ilen + buf_len) / block_length(sha_type);
memset(&s_dma_descr_input, 0, sizeof(lldesc_t));
memset(&s_dma_descr_buf, 0, sizeof(lldesc_t));
/* DMA descriptor for Memory to DMA-SHA transfer */
if (ilen) {
s_dma_descr_input.length = ilen;
s_dma_descr_input.size = ilen;
s_dma_descr_input.owner = 1;
s_dma_descr_input.eof = 1;
s_dma_descr_input.buf = (uint8_t *)input;
dma_descr_head = &s_dma_descr_input;
}
/* Check after input to overide head if there is any buf*/
if (buf_len) {
s_dma_descr_buf.length = buf_len;
s_dma_descr_buf.size = buf_len;
s_dma_descr_buf.owner = 1;
s_dma_descr_buf.eof = 1;
s_dma_descr_buf.buf = (uint8_t *)buf;
dma_descr_head = &s_dma_descr_buf;
}
/* Link DMA lists */
if (buf_len && ilen) {
s_dma_descr_buf.eof = 0;
s_dma_descr_buf.empty = (uint32_t)(&s_dma_descr_input);
}
if (esp_sha_dma_start(dma_descr_head) != ESP_OK) {
ESP_LOGE(TAG, "esp_sha_dma_start failed, no DMA channel available");
return -1;
}
sha_hal_hash_dma(sha_type, num_blks, is_first_block);
sha_hal_wait_idle();
return ret;
}
static bool s_check_dma_capable(const void *p)
{
bool is_capable = false;
#if CONFIG_SPIRAM
is_capable |= esp_ptr_dma_ext_capable(p);
#endif
is_capable |= esp_ptr_dma_capable(p);
return is_capable;
}