alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
28b8fc6a7e
esp-idf/components/soc/esp32c3/include/soc/extmem_reg.h
Angus Gratton c29d93986d soc: Add initial ESP32-C3 support 
From internal commit 7761d6e8
2020-11-30 11:12:56 +11:00

993 lines
54 KiB
C
Raw Blame History

// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_EXTMEM_REG_H_
#define _SOC_EXTMEM_REG_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "soc.h"
#define EXTMEM_ICACHE_CTRL_REG (DR_REG_EXTMEM_BASE + 0x000)
/* EXTMEM_ICACHE_ENABLE : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to activate the data cache. 0: disable 1: enable*/
#define EXTMEM_ICACHE_ENABLE (BIT(0))
#define EXTMEM_ICACHE_ENABLE_M (BIT(0))
#define EXTMEM_ICACHE_ENABLE_V 0x1
#define EXTMEM_ICACHE_ENABLE_S 0
#define EXTMEM_ICACHE_CTRL1_REG (DR_REG_EXTMEM_BASE + 0x004)
/* EXTMEM_ICACHE_SHUT_DBUS : R/W ;bitpos:[1] ;default: 1'b1 ; */
/*description: The bit is used to disable core1 ibus 0: enable 1: disable*/
#define EXTMEM_ICACHE_SHUT_DBUS (BIT(1))
#define EXTMEM_ICACHE_SHUT_DBUS_M (BIT(1))
#define EXTMEM_ICACHE_SHUT_DBUS_V 0x1
#define EXTMEM_ICACHE_SHUT_DBUS_S 1
/* EXTMEM_ICACHE_SHUT_IBUS : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to disable core0 ibus 0: enable 1: disable*/
#define EXTMEM_ICACHE_SHUT_IBUS (BIT(0))
#define EXTMEM_ICACHE_SHUT_IBUS_M (BIT(0))
#define EXTMEM_ICACHE_SHUT_IBUS_V 0x1
#define EXTMEM_ICACHE_SHUT_IBUS_S 0
#define EXTMEM_ICACHE_TAG_POWER_CTRL_REG (DR_REG_EXTMEM_BASE + 0x008)
/* EXTMEM_ICACHE_TAG_MEM_FORCE_PU : R/W ;bitpos:[2] ;default: 1'b1 ; */
/*description: The bit is used to power icache tag memory up 0: follow rtc_lslp 1: power up*/
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PU (BIT(2))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PU_M (BIT(2))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PU_V 0x1
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PU_S 2
/* EXTMEM_ICACHE_TAG_MEM_FORCE_PD : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to power icache tag memory down 0: follow rtc_lslp
1: power down*/
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PD (BIT(1))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PD_M (BIT(1))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PD_V 0x1
#define EXTMEM_ICACHE_TAG_MEM_FORCE_PD_S 1
/* EXTMEM_ICACHE_TAG_MEM_FORCE_ON : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to close clock gating of icache tag memory.
1: close gating 0: open clock gating.*/
#define EXTMEM_ICACHE_TAG_MEM_FORCE_ON (BIT(0))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_ON_M (BIT(0))
#define EXTMEM_ICACHE_TAG_MEM_FORCE_ON_V 0x1
#define EXTMEM_ICACHE_TAG_MEM_FORCE_ON_S 0
#define EXTMEM_ICACHE_PRELOCK_CTRL_REG (DR_REG_EXTMEM_BASE + 0x00C)
/* EXTMEM_ICACHE_PRELOCK_SCT1_EN : R/W ;bitpos:[1] ;default: 1'h0 ; */
/*description: The bit is used to enable the second section of prelock function.*/
#define EXTMEM_ICACHE_PRELOCK_SCT1_EN (BIT(1))
#define EXTMEM_ICACHE_PRELOCK_SCT1_EN_M (BIT(1))
#define EXTMEM_ICACHE_PRELOCK_SCT1_EN_V 0x1
#define EXTMEM_ICACHE_PRELOCK_SCT1_EN_S 1
/* EXTMEM_ICACHE_PRELOCK_SCT0_EN : R/W ;bitpos:[0] ;default: 1'h0 ; */
/*description: The bit is used to enable the first section of prelock function.*/
#define EXTMEM_ICACHE_PRELOCK_SCT0_EN (BIT(0))
#define EXTMEM_ICACHE_PRELOCK_SCT0_EN_M (BIT(0))
#define EXTMEM_ICACHE_PRELOCK_SCT0_EN_V 0x1
#define EXTMEM_ICACHE_PRELOCK_SCT0_EN_S 0
#define EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_REG (DR_REG_EXTMEM_BASE + 0x010)
/* EXTMEM_ICACHE_PRELOCK_SCT0_ADDR : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to configure the first start virtual address
of data prelock which is combined with ICACHE_PRELOCK_SCT0_SIZE_REG*/
#define EXTMEM_ICACHE_PRELOCK_SCT0_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_M ((EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_V)<<(EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_S))
#define EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT0_ADDR_S 0
#define EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_REG (DR_REG_EXTMEM_BASE + 0x014)
/* EXTMEM_ICACHE_PRELOCK_SCT1_ADDR : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to configure the second start virtual address
of data prelock which is combined with ICACHE_PRELOCK_SCT1_SIZE_REG*/
#define EXTMEM_ICACHE_PRELOCK_SCT1_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_M ((EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_V)<<(EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_S))
#define EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT1_ADDR_S 0
#define EXTMEM_ICACHE_PRELOCK_SCT_SIZE_REG (DR_REG_EXTMEM_BASE + 0x018)
/* EXTMEM_ICACHE_PRELOCK_SCT0_SIZE : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
/*description: The bits are used to configure the first length of data locking
which is combined with ICACHE_PRELOCK_SCT0_ADDR_REG*/
#define EXTMEM_ICACHE_PRELOCK_SCT0_SIZE 0x0000FFFF
#define EXTMEM_ICACHE_PRELOCK_SCT0_SIZE_M ((EXTMEM_ICACHE_PRELOCK_SCT0_SIZE_V)<<(EXTMEM_ICACHE_PRELOCK_SCT0_SIZE_S))
#define EXTMEM_ICACHE_PRELOCK_SCT0_SIZE_V 0xFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT0_SIZE_S 16
/* EXTMEM_ICACHE_PRELOCK_SCT1_SIZE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: The bits are used to configure the second length of data locking
which is combined with ICACHE_PRELOCK_SCT1_ADDR_REG*/
#define EXTMEM_ICACHE_PRELOCK_SCT1_SIZE 0x0000FFFF
#define EXTMEM_ICACHE_PRELOCK_SCT1_SIZE_M ((EXTMEM_ICACHE_PRELOCK_SCT1_SIZE_V)<<(EXTMEM_ICACHE_PRELOCK_SCT1_SIZE_S))
#define EXTMEM_ICACHE_PRELOCK_SCT1_SIZE_V 0xFFFF
#define EXTMEM_ICACHE_PRELOCK_SCT1_SIZE_S 0
#define EXTMEM_ICACHE_LOCK_CTRL_REG (DR_REG_EXTMEM_BASE + 0x01C)
/* EXTMEM_ICACHE_LOCK_DONE : RO ;bitpos:[2] ;default: 1'b1 ; */
/*description: The bit is used to indicate unlock/lock operation is finished.*/
#define EXTMEM_ICACHE_LOCK_DONE (BIT(2))
#define EXTMEM_ICACHE_LOCK_DONE_M (BIT(2))
#define EXTMEM_ICACHE_LOCK_DONE_V 0x1
#define EXTMEM_ICACHE_LOCK_DONE_S 2
/* EXTMEM_ICACHE_UNLOCK_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to enable unlock operation. It will be cleared
by hardware after unlock operation done.*/
#define EXTMEM_ICACHE_UNLOCK_ENA (BIT(1))
#define EXTMEM_ICACHE_UNLOCK_ENA_M (BIT(1))
#define EXTMEM_ICACHE_UNLOCK_ENA_V 0x1
#define EXTMEM_ICACHE_UNLOCK_ENA_S 1
/* EXTMEM_ICACHE_LOCK_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable lock operation. It will be cleared
by hardware after lock operation done.*/
#define EXTMEM_ICACHE_LOCK_ENA (BIT(0))
#define EXTMEM_ICACHE_LOCK_ENA_M (BIT(0))
#define EXTMEM_ICACHE_LOCK_ENA_V 0x1
#define EXTMEM_ICACHE_LOCK_ENA_S 0
#define EXTMEM_ICACHE_LOCK_ADDR_REG (DR_REG_EXTMEM_BASE + 0x020)
/* EXTMEM_ICACHE_LOCK_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: The bits are used to configure the start virtual address for
lock operations. It should be combined with ICACHE_LOCK_SIZE_REG.*/
#define EXTMEM_ICACHE_LOCK_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_LOCK_ADDR_M ((EXTMEM_ICACHE_LOCK_ADDR_V)<<(EXTMEM_ICACHE_LOCK_ADDR_S))
#define EXTMEM_ICACHE_LOCK_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_LOCK_ADDR_S 0
#define EXTMEM_ICACHE_LOCK_SIZE_REG (DR_REG_EXTMEM_BASE + 0x024)
/* EXTMEM_ICACHE_LOCK_SIZE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: The bits are used to configure the length for lock operations.
The bits are the counts of cache block. It should be combined with ICACHE_LOCK_ADDR_REG.*/
#define EXTMEM_ICACHE_LOCK_SIZE 0x0000FFFF
#define EXTMEM_ICACHE_LOCK_SIZE_M ((EXTMEM_ICACHE_LOCK_SIZE_V)<<(EXTMEM_ICACHE_LOCK_SIZE_S))
#define EXTMEM_ICACHE_LOCK_SIZE_V 0xFFFF
#define EXTMEM_ICACHE_LOCK_SIZE_S 0
#define EXTMEM_ICACHE_SYNC_CTRL_REG (DR_REG_EXTMEM_BASE + 0x028)
/* EXTMEM_ICACHE_SYNC_DONE : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to indicate invalidate operation is finished.*/
#define EXTMEM_ICACHE_SYNC_DONE (BIT(1))
#define EXTMEM_ICACHE_SYNC_DONE_M (BIT(1))
#define EXTMEM_ICACHE_SYNC_DONE_V 0x1
#define EXTMEM_ICACHE_SYNC_DONE_S 1
/* EXTMEM_ICACHE_INVALIDATE_ENA : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to enable invalidate operation. It will be cleared
by hardware after invalidate operation done.*/
#define EXTMEM_ICACHE_INVALIDATE_ENA (BIT(0))
#define EXTMEM_ICACHE_INVALIDATE_ENA_M (BIT(0))
#define EXTMEM_ICACHE_INVALIDATE_ENA_V 0x1
#define EXTMEM_ICACHE_INVALIDATE_ENA_S 0
#define EXTMEM_ICACHE_SYNC_ADDR_REG (DR_REG_EXTMEM_BASE + 0x02C)
/* EXTMEM_ICACHE_SYNC_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: The bits are used to configure the start virtual address for
clean operations. It should be combined with ICACHE_SYNC_SIZE_REG.*/
#define EXTMEM_ICACHE_SYNC_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_SYNC_ADDR_M ((EXTMEM_ICACHE_SYNC_ADDR_V)<<(EXTMEM_ICACHE_SYNC_ADDR_S))
#define EXTMEM_ICACHE_SYNC_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_SYNC_ADDR_S 0
#define EXTMEM_ICACHE_SYNC_SIZE_REG (DR_REG_EXTMEM_BASE + 0x030)
/* EXTMEM_ICACHE_SYNC_SIZE : R/W ;bitpos:[22:0] ;default: 23'h0 ; */
/*description: The bits are used to configure the length for sync operations.
The bits are the counts of cache block. It should be combined with ICACHE_SYNC_ADDR_REG.*/
#define EXTMEM_ICACHE_SYNC_SIZE 0x007FFFFF
#define EXTMEM_ICACHE_SYNC_SIZE_M ((EXTMEM_ICACHE_SYNC_SIZE_V)<<(EXTMEM_ICACHE_SYNC_SIZE_S))
#define EXTMEM_ICACHE_SYNC_SIZE_V 0x7FFFFF
#define EXTMEM_ICACHE_SYNC_SIZE_S 0
#define EXTMEM_ICACHE_PRELOAD_CTRL_REG (DR_REG_EXTMEM_BASE + 0x034)
/* EXTMEM_ICACHE_PRELOAD_ORDER : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to configure the direction of preload operation.
1: descending 0: ascending.*/
#define EXTMEM_ICACHE_PRELOAD_ORDER (BIT(2))
#define EXTMEM_ICACHE_PRELOAD_ORDER_M (BIT(2))
#define EXTMEM_ICACHE_PRELOAD_ORDER_V 0x1
#define EXTMEM_ICACHE_PRELOAD_ORDER_S 2
/* EXTMEM_ICACHE_PRELOAD_DONE : RO ;bitpos:[1] ;default: 1'b1 ; */
/*description: The bit is used to indicate preload operation is finished.*/
#define EXTMEM_ICACHE_PRELOAD_DONE (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_DONE_M (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_DONE_V 0x1
#define EXTMEM_ICACHE_PRELOAD_DONE_S 1
/* EXTMEM_ICACHE_PRELOAD_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable preload operation. It will be cleared
by hardware after preload operation done.*/
#define EXTMEM_ICACHE_PRELOAD_ENA (BIT(0))
#define EXTMEM_ICACHE_PRELOAD_ENA_M (BIT(0))
#define EXTMEM_ICACHE_PRELOAD_ENA_V 0x1
#define EXTMEM_ICACHE_PRELOAD_ENA_S 0
#define EXTMEM_ICACHE_PRELOAD_ADDR_REG (DR_REG_EXTMEM_BASE + 0x038)
/* EXTMEM_ICACHE_PRELOAD_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: The bits are used to configure the start virtual address for
preload operation. It should be combined with ICACHE_PRELOAD_SIZE_REG.*/
#define EXTMEM_ICACHE_PRELOAD_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOAD_ADDR_M ((EXTMEM_ICACHE_PRELOAD_ADDR_V)<<(EXTMEM_ICACHE_PRELOAD_ADDR_S))
#define EXTMEM_ICACHE_PRELOAD_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_PRELOAD_ADDR_S 0
#define EXTMEM_ICACHE_PRELOAD_SIZE_REG (DR_REG_EXTMEM_BASE + 0x03C)
/* EXTMEM_ICACHE_PRELOAD_SIZE : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
/*description: The bits are used to configure the length for preload operation.
The bits are the counts of cache block. It should be combined with ICACHE_PRELOAD_ADDR_REG..*/
#define EXTMEM_ICACHE_PRELOAD_SIZE 0x0000FFFF
#define EXTMEM_ICACHE_PRELOAD_SIZE_M ((EXTMEM_ICACHE_PRELOAD_SIZE_V)<<(EXTMEM_ICACHE_PRELOAD_SIZE_S))
#define EXTMEM_ICACHE_PRELOAD_SIZE_V 0xFFFF
#define EXTMEM_ICACHE_PRELOAD_SIZE_S 0
#define EXTMEM_ICACHE_AUTOLOAD_CTRL_REG (DR_REG_EXTMEM_BASE + 0x040)
/* EXTMEM_ICACHE_AUTOLOAD_RQST : R/W ;bitpos:[6:5] ;default: 2'b0 ; */
/*description: The bits are used to configure trigger conditions for autoload.
0/3: cache miss 1: cache hit 2: both cache miss and hit.*/
#define EXTMEM_ICACHE_AUTOLOAD_RQST 0x00000003
#define EXTMEM_ICACHE_AUTOLOAD_RQST_M ((EXTMEM_ICACHE_AUTOLOAD_RQST_V)<<(EXTMEM_ICACHE_AUTOLOAD_RQST_S))
#define EXTMEM_ICACHE_AUTOLOAD_RQST_V 0x3
#define EXTMEM_ICACHE_AUTOLOAD_RQST_S 5
/* EXTMEM_ICACHE_AUTOLOAD_ORDER : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: The bits are used to configure the direction of autoload. 1:
descending 0: ascending.*/
#define EXTMEM_ICACHE_AUTOLOAD_ORDER (BIT(4))
#define EXTMEM_ICACHE_AUTOLOAD_ORDER_M (BIT(4))
#define EXTMEM_ICACHE_AUTOLOAD_ORDER_V 0x1
#define EXTMEM_ICACHE_AUTOLOAD_ORDER_S 4
/* EXTMEM_ICACHE_AUTOLOAD_DONE : RO ;bitpos:[3] ;default: 1'b1 ; */
/*description: The bit is used to indicate autoload operation is finished.*/
#define EXTMEM_ICACHE_AUTOLOAD_DONE (BIT(3))
#define EXTMEM_ICACHE_AUTOLOAD_DONE_M (BIT(3))
#define EXTMEM_ICACHE_AUTOLOAD_DONE_V 0x1
#define EXTMEM_ICACHE_AUTOLOAD_DONE_S 3
/* EXTMEM_ICACHE_AUTOLOAD_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to enable and disable autoload operation. It
is combined with icache_autoload_done. 1: enable 0: disable.*/
#define EXTMEM_ICACHE_AUTOLOAD_ENA (BIT(2))
#define EXTMEM_ICACHE_AUTOLOAD_ENA_M (BIT(2))
#define EXTMEM_ICACHE_AUTOLOAD_ENA_V 0x1
#define EXTMEM_ICACHE_AUTOLOAD_ENA_S 2
/* EXTMEM_ICACHE_AUTOLOAD_SCT1_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bits are used to enable the second section for autoload operation.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ENA (BIT(1))
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ENA_M (BIT(1))
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ENA_V 0x1
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ENA_S 1
/* EXTMEM_ICACHE_AUTOLOAD_SCT0_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bits are used to enable the first section for autoload operation.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ENA (BIT(0))
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ENA_M (BIT(0))
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ENA_V 0x1
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ENA_S 0
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_REG (DR_REG_EXTMEM_BASE + 0x044)
/* EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: The bits are used to configure the start virtual address of the
first section for autoload operation. It should be combined with icache_autoload_sct0_ena.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_M ((EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_V)<<(EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_S))
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_ADDR_S 0
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_REG (DR_REG_EXTMEM_BASE + 0x048)
/* EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE : R/W ;bitpos:[26:0] ;default: 27'h0 ; */
/*description: The bits are used to configure the length of the first section
for autoload operation. It should be combined with icache_autoload_sct0_ena.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE 0x07FFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_M ((EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_V)<<(EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_S))
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_V 0x7FFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT0_SIZE_S 0
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_REG (DR_REG_EXTMEM_BASE + 0x04C)
/* EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR : R/W ;bitpos:[31:0] ;default: 32'b0 ; */
/*description: The bits are used to configure the start virtual address of the
second section for autoload operation. It should be combined with icache_autoload_sct1_ena.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR 0xFFFFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_M ((EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_V)<<(EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_S))
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_V 0xFFFFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_ADDR_S 0
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_REG (DR_REG_EXTMEM_BASE + 0x050)
/* EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE : R/W ;bitpos:[26:0] ;default: 27'h0 ; */
/*description: The bits are used to configure the length of the second section
for autoload operation. It should be combined with icache_autoload_sct1_ena.*/
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE 0x07FFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_M ((EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_V)<<(EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_S))
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_V 0x7FFFFFF
#define EXTMEM_ICACHE_AUTOLOAD_SCT1_SIZE_S 0
#define EXTMEM_IBUS_TO_FLASH_START_VADDR_REG (DR_REG_EXTMEM_BASE + 0x054)
/* EXTMEM_IBUS_TO_FLASH_START_VADDR : R/W ;bitpos:[31:0] ;default: 32'h42000000 ; */
/*description: The bits are used to configure the start virtual address of ibus
to access flash. The register is used to give constraints to ibus access counter.*/
#define EXTMEM_IBUS_TO_FLASH_START_VADDR 0xFFFFFFFF
#define EXTMEM_IBUS_TO_FLASH_START_VADDR_M ((EXTMEM_IBUS_TO_FLASH_START_VADDR_V)<<(EXTMEM_IBUS_TO_FLASH_START_VADDR_S))
#define EXTMEM_IBUS_TO_FLASH_START_VADDR_V 0xFFFFFFFF
#define EXTMEM_IBUS_TO_FLASH_START_VADDR_S 0
#define EXTMEM_IBUS_TO_FLASH_END_VADDR_REG (DR_REG_EXTMEM_BASE + 0x058)
/* EXTMEM_IBUS_TO_FLASH_END_VADDR : R/W ;bitpos:[31:0] ;default: 32'h427FFFFF ; */
/*description: The bits are used to configure the end virtual address of ibus
to access flash. The register is used to give constraints to ibus access counter.*/
#define EXTMEM_IBUS_TO_FLASH_END_VADDR 0xFFFFFFFF
#define EXTMEM_IBUS_TO_FLASH_END_VADDR_M ((EXTMEM_IBUS_TO_FLASH_END_VADDR_V)<<(EXTMEM_IBUS_TO_FLASH_END_VADDR_S))
#define EXTMEM_IBUS_TO_FLASH_END_VADDR_V 0xFFFFFFFF
#define EXTMEM_IBUS_TO_FLASH_END_VADDR_S 0
#define EXTMEM_DBUS_TO_FLASH_START_VADDR_REG (DR_REG_EXTMEM_BASE + 0x05C)
/* EXTMEM_DBUS_TO_FLASH_START_VADDR : R/W ;bitpos:[31:0] ;default: 32'h3C000000 ; */
/*description: The bits are used to configure the start virtual address of dbus
to access flash. The register is used to give constraints to dbus access counter.*/
#define EXTMEM_DBUS_TO_FLASH_START_VADDR 0xFFFFFFFF
#define EXTMEM_DBUS_TO_FLASH_START_VADDR_M ((EXTMEM_DBUS_TO_FLASH_START_VADDR_V)<<(EXTMEM_DBUS_TO_FLASH_START_VADDR_S))
#define EXTMEM_DBUS_TO_FLASH_START_VADDR_V 0xFFFFFFFF
#define EXTMEM_DBUS_TO_FLASH_START_VADDR_S 0
#define EXTMEM_DBUS_TO_FLASH_END_VADDR_REG (DR_REG_EXTMEM_BASE + 0x060)
/* EXTMEM_DBUS_TO_FLASH_END_VADDR : R/W ;bitpos:[31:0] ;default: 32'h3C7FFFFF ; */
/*description: The bits are used to configure the end virtual address of dbus
to access flash. The register is used to give constraints to dbus access counter.*/
#define EXTMEM_DBUS_TO_FLASH_END_VADDR 0xFFFFFFFF
#define EXTMEM_DBUS_TO_FLASH_END_VADDR_M ((EXTMEM_DBUS_TO_FLASH_END_VADDR_V)<<(EXTMEM_DBUS_TO_FLASH_END_VADDR_S))
#define EXTMEM_DBUS_TO_FLASH_END_VADDR_V 0xFFFFFFFF
#define EXTMEM_DBUS_TO_FLASH_END_VADDR_S 0
#define EXTMEM_CACHE_ACS_CNT_CLR_REG (DR_REG_EXTMEM_BASE + 0x064)
/* EXTMEM_DBUS_ACS_CNT_CLR : WOD ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to clear dbus counter.*/
#define EXTMEM_DBUS_ACS_CNT_CLR (BIT(1))
#define EXTMEM_DBUS_ACS_CNT_CLR_M (BIT(1))
#define EXTMEM_DBUS_ACS_CNT_CLR_V 0x1
#define EXTMEM_DBUS_ACS_CNT_CLR_S 1
/* EXTMEM_IBUS_ACS_CNT_CLR : WOD ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to clear ibus counter.*/
#define EXTMEM_IBUS_ACS_CNT_CLR (BIT(0))
#define EXTMEM_IBUS_ACS_CNT_CLR_M (BIT(0))
#define EXTMEM_IBUS_ACS_CNT_CLR_V 0x1
#define EXTMEM_IBUS_ACS_CNT_CLR_S 0
#define EXTMEM_IBUS_ACS_MISS_CNT_REG (DR_REG_EXTMEM_BASE + 0x068)
/* EXTMEM_IBUS_ACS_MISS_CNT : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to count the number of the cache miss caused
by ibus access flash.*/
#define EXTMEM_IBUS_ACS_MISS_CNT 0xFFFFFFFF
#define EXTMEM_IBUS_ACS_MISS_CNT_M ((EXTMEM_IBUS_ACS_MISS_CNT_V)<<(EXTMEM_IBUS_ACS_MISS_CNT_S))
#define EXTMEM_IBUS_ACS_MISS_CNT_V 0xFFFFFFFF
#define EXTMEM_IBUS_ACS_MISS_CNT_S 0
#define EXTMEM_IBUS_ACS_CNT_REG (DR_REG_EXTMEM_BASE + 0x06C)
/* EXTMEM_IBUS_ACS_CNT : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to count the number of ibus access flash through icache.*/
#define EXTMEM_IBUS_ACS_CNT 0xFFFFFFFF
#define EXTMEM_IBUS_ACS_CNT_M ((EXTMEM_IBUS_ACS_CNT_V)<<(EXTMEM_IBUS_ACS_CNT_S))
#define EXTMEM_IBUS_ACS_CNT_V 0xFFFFFFFF
#define EXTMEM_IBUS_ACS_CNT_S 0
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_REG (DR_REG_EXTMEM_BASE + 0x070)
/* EXTMEM_DBUS_ACS_FLASH_MISS_CNT : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to count the number of the cache miss caused
by dbus access flash.*/
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT 0xFFFFFFFF
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_M ((EXTMEM_DBUS_ACS_FLASH_MISS_CNT_V)<<(EXTMEM_DBUS_ACS_FLASH_MISS_CNT_S))
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_V 0xFFFFFFFF
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_S 0
#define EXTMEM_DBUS_ACS_CNT_REG (DR_REG_EXTMEM_BASE + 0x074)
/* EXTMEM_DBUS_ACS_CNT : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to count the number of dbus access flash through icache.*/
#define EXTMEM_DBUS_ACS_CNT 0xFFFFFFFF
#define EXTMEM_DBUS_ACS_CNT_M ((EXTMEM_DBUS_ACS_CNT_V)<<(EXTMEM_DBUS_ACS_CNT_S))
#define EXTMEM_DBUS_ACS_CNT_V 0xFFFFFFFF
#define EXTMEM_DBUS_ACS_CNT_S 0
#define EXTMEM_CACHE_ILG_INT_ENA_REG (DR_REG_EXTMEM_BASE + 0x078)
/* EXTMEM_DBUS_CNT_OVF_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by dbus counter overflow.*/
#define EXTMEM_DBUS_CNT_OVF_INT_ENA (BIT(8))
#define EXTMEM_DBUS_CNT_OVF_INT_ENA_M (BIT(8))
#define EXTMEM_DBUS_CNT_OVF_INT_ENA_V 0x1
#define EXTMEM_DBUS_CNT_OVF_INT_ENA_S 8
/* EXTMEM_IBUS_CNT_OVF_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by ibus counter overflow.*/
#define EXTMEM_IBUS_CNT_OVF_INT_ENA (BIT(7))
#define EXTMEM_IBUS_CNT_OVF_INT_ENA_M (BIT(7))
#define EXTMEM_IBUS_CNT_OVF_INT_ENA_V 0x1
#define EXTMEM_IBUS_CNT_OVF_INT_ENA_S 7
/* EXTMEM_MMU_ENTRY_FAULT_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by mmu entry fault.*/
#define EXTMEM_MMU_ENTRY_FAULT_INT_ENA (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_INT_ENA_M (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_INT_ENA_V 0x1
#define EXTMEM_MMU_ENTRY_FAULT_INT_ENA_S 5
/* EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by preload configurations fault.*/
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_ENA (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_ENA_M (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_ENA_V 0x1
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_ENA_S 1
/* EXTMEM_ICACHE_SYNC_OP_FAULT_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by sync configurations fault.*/
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_ENA (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_ENA_M (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_ENA_V 0x1
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_ENA_S 0
#define EXTMEM_CACHE_ILG_INT_CLR_REG (DR_REG_EXTMEM_BASE + 0x07C)
/* EXTMEM_DBUS_CNT_OVF_INT_CLR : WOD ;bitpos:[8] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by dbus counter overflow.*/
#define EXTMEM_DBUS_CNT_OVF_INT_CLR (BIT(8))
#define EXTMEM_DBUS_CNT_OVF_INT_CLR_M (BIT(8))
#define EXTMEM_DBUS_CNT_OVF_INT_CLR_V 0x1
#define EXTMEM_DBUS_CNT_OVF_INT_CLR_S 8
/* EXTMEM_IBUS_CNT_OVF_INT_CLR : WOD ;bitpos:[7] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by ibus counter overflow.*/
#define EXTMEM_IBUS_CNT_OVF_INT_CLR (BIT(7))
#define EXTMEM_IBUS_CNT_OVF_INT_CLR_M (BIT(7))
#define EXTMEM_IBUS_CNT_OVF_INT_CLR_V 0x1
#define EXTMEM_IBUS_CNT_OVF_INT_CLR_S 7
/* EXTMEM_MMU_ENTRY_FAULT_INT_CLR : WOD ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by mmu entry fault.*/
#define EXTMEM_MMU_ENTRY_FAULT_INT_CLR (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_INT_CLR_M (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_INT_CLR_V 0x1
#define EXTMEM_MMU_ENTRY_FAULT_INT_CLR_S 5
/* EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_CLR : WOD ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by preload configurations fault.*/
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_CLR (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_CLR_M (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_CLR_V 0x1
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_INT_CLR_S 1
/* EXTMEM_ICACHE_SYNC_OP_FAULT_INT_CLR : WOD ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by sync configurations fault.*/
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_CLR (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_CLR_M (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_CLR_V 0x1
#define EXTMEM_ICACHE_SYNC_OP_FAULT_INT_CLR_S 0
#define EXTMEM_CACHE_ILG_INT_ST_REG (DR_REG_EXTMEM_BASE + 0x080)
/* EXTMEM_DBUS_ACS_FLASH_MISS_CNT_OVF_ST : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by dbus access flash miss
counter overflow.*/
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_OVF_ST (BIT(10))
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_OVF_ST_M (BIT(10))
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_OVF_ST_V 0x1
#define EXTMEM_DBUS_ACS_FLASH_MISS_CNT_OVF_ST_S 10
/* EXTMEM_DBUS_ACS_CNT_OVF_ST : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by dbus access flash/spiram
counter overflow.*/
#define EXTMEM_DBUS_ACS_CNT_OVF_ST (BIT(9))
#define EXTMEM_DBUS_ACS_CNT_OVF_ST_M (BIT(9))
#define EXTMEM_DBUS_ACS_CNT_OVF_ST_V 0x1
#define EXTMEM_DBUS_ACS_CNT_OVF_ST_S 9
/* EXTMEM_IBUS_ACS_MISS_CNT_OVF_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by ibus access flash/spiram
miss counter overflow.*/
#define EXTMEM_IBUS_ACS_MISS_CNT_OVF_ST (BIT(8))
#define EXTMEM_IBUS_ACS_MISS_CNT_OVF_ST_M (BIT(8))
#define EXTMEM_IBUS_ACS_MISS_CNT_OVF_ST_V 0x1
#define EXTMEM_IBUS_ACS_MISS_CNT_OVF_ST_S 8
/* EXTMEM_IBUS_ACS_CNT_OVF_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by ibus access flash/spiram
counter overflow.*/
#define EXTMEM_IBUS_ACS_CNT_OVF_ST (BIT(7))
#define EXTMEM_IBUS_ACS_CNT_OVF_ST_M (BIT(7))
#define EXTMEM_IBUS_ACS_CNT_OVF_ST_V 0x1
#define EXTMEM_IBUS_ACS_CNT_OVF_ST_S 7
/* EXTMEM_MMU_ENTRY_FAULT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by mmu entry fault.*/
#define EXTMEM_MMU_ENTRY_FAULT_ST (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_ST_M (BIT(5))
#define EXTMEM_MMU_ENTRY_FAULT_ST_V 0x1
#define EXTMEM_MMU_ENTRY_FAULT_ST_S 5
/* EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by preload configurations fault.*/
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST_M (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST_V 0x1
#define EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST_S 1
/* EXTMEM_ICACHE_SYNC_OP_FAULT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by sync configurations fault.*/
#define EXTMEM_ICACHE_SYNC_OP_FAULT_ST (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_ST_M (BIT(0))
#define EXTMEM_ICACHE_SYNC_OP_FAULT_ST_V 0x1
#define EXTMEM_ICACHE_SYNC_OP_FAULT_ST_S 0
#define EXTMEM_CORE0_ACS_CACHE_INT_ENA_REG (DR_REG_EXTMEM_BASE + 0x084)
/* EXTMEM_CORE0_DBUS_WR_IC_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by dbus trying to write icache*/
#define EXTMEM_CORE0_DBUS_WR_IC_INT_ENA (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_IC_INT_ENA_M (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_IC_INT_ENA_V 0x1
#define EXTMEM_CORE0_DBUS_WR_IC_INT_ENA_S 5
/* EXTMEM_CORE0_DBUS_REJECT_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by authentication fail.*/
#define EXTMEM_CORE0_DBUS_REJECT_INT_ENA (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_INT_ENA_M (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_INT_ENA_V 0x1
#define EXTMEM_CORE0_DBUS_REJECT_INT_ENA_S 4
/* EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by cpu access icache while
the corresponding dbus is disabled which include speculative access.*/
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_ENA (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_ENA_M (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_ENA_V 0x1
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_ENA_S 3
/* EXTMEM_CORE0_IBUS_REJECT_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by authentication fail.*/
#define EXTMEM_CORE0_IBUS_REJECT_INT_ENA (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_INT_ENA_M (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_INT_ENA_V 0x1
#define EXTMEM_CORE0_IBUS_REJECT_INT_ENA_S 2
/* EXTMEM_CORE0_IBUS_WR_IC_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by ibus trying to write icache*/
#define EXTMEM_CORE0_IBUS_WR_IC_INT_ENA (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_IC_INT_ENA_M (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_IC_INT_ENA_V 0x1
#define EXTMEM_CORE0_IBUS_WR_IC_INT_ENA_S 1
/* EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable interrupt by cpu access icache while
the corresponding ibus is disabled which include speculative access.*/
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_ENA (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_ENA_M (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_ENA_V 0x1
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_ENA_S 0
#define EXTMEM_CORE0_ACS_CACHE_INT_CLR_REG (DR_REG_EXTMEM_BASE + 0x088)
/* EXTMEM_CORE0_DBUS_WR_IC_INT_CLR : WOD ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by dbus trying to write icache*/
#define EXTMEM_CORE0_DBUS_WR_IC_INT_CLR (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_IC_INT_CLR_M (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_IC_INT_CLR_V 0x1
#define EXTMEM_CORE0_DBUS_WR_IC_INT_CLR_S 5
/* EXTMEM_CORE0_DBUS_REJECT_INT_CLR : WOD ;bitpos:[4] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by authentication fail.*/
#define EXTMEM_CORE0_DBUS_REJECT_INT_CLR (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_INT_CLR_M (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_INT_CLR_V 0x1
#define EXTMEM_CORE0_DBUS_REJECT_INT_CLR_S 4
/* EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_CLR : WOD ;bitpos:[3] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by cpu access icache while
the corresponding dbus is disabled or icache is disabled which include speculative access.*/
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_CLR (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_CLR_M (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_CLR_V 0x1
#define EXTMEM_CORE0_DBUS_ACS_MSK_IC_INT_CLR_S 3
/* EXTMEM_CORE0_IBUS_REJECT_INT_CLR : WOD ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by authentication fail.*/
#define EXTMEM_CORE0_IBUS_REJECT_INT_CLR (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_INT_CLR_M (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_INT_CLR_V 0x1
#define EXTMEM_CORE0_IBUS_REJECT_INT_CLR_S 2
/* EXTMEM_CORE0_IBUS_WR_IC_INT_CLR : WOD ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by ibus trying to write icache*/
#define EXTMEM_CORE0_IBUS_WR_IC_INT_CLR (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_IC_INT_CLR_M (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_IC_INT_CLR_V 0x1
#define EXTMEM_CORE0_IBUS_WR_IC_INT_CLR_S 1
/* EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_CLR : WOD ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to clear interrupt by cpu access icache while
the corresponding ibus is disabled or icache is disabled which include speculative access.*/
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_CLR (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_CLR_M (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_CLR_V 0x1
#define EXTMEM_CORE0_IBUS_ACS_MSK_IC_INT_CLR_S 0
#define EXTMEM_CORE0_ACS_CACHE_INT_ST_REG (DR_REG_EXTMEM_BASE + 0x08C)
/* EXTMEM_CORE0_DBUS_WR_ICACHE_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by dbus trying to write icache*/
#define EXTMEM_CORE0_DBUS_WR_ICACHE_ST (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_ICACHE_ST_M (BIT(5))
#define EXTMEM_CORE0_DBUS_WR_ICACHE_ST_V 0x1
#define EXTMEM_CORE0_DBUS_WR_ICACHE_ST_S 5
/* EXTMEM_CORE0_DBUS_REJECT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by authentication fail.*/
#define EXTMEM_CORE0_DBUS_REJECT_ST (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_ST_M (BIT(4))
#define EXTMEM_CORE0_DBUS_REJECT_ST_V 0x1
#define EXTMEM_CORE0_DBUS_REJECT_ST_S 4
/* EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by cpu access icache while
the core0_dbus is disabled or icache is disabled which include speculative access.*/
#define EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST_M (BIT(3))
#define EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST_V 0x1
#define EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST_S 3
/* EXTMEM_CORE0_IBUS_REJECT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by authentication fail.*/
#define EXTMEM_CORE0_IBUS_REJECT_ST (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_ST_M (BIT(2))
#define EXTMEM_CORE0_IBUS_REJECT_ST_V 0x1
#define EXTMEM_CORE0_IBUS_REJECT_ST_S 2
/* EXTMEM_CORE0_IBUS_WR_ICACHE_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by ibus trying to write icache*/
#define EXTMEM_CORE0_IBUS_WR_ICACHE_ST (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_ICACHE_ST_M (BIT(1))
#define EXTMEM_CORE0_IBUS_WR_ICACHE_ST_V 0x1
#define EXTMEM_CORE0_IBUS_WR_ICACHE_ST_S 1
/* EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to indicate interrupt by cpu access icache while
the core0_ibus is disabled or icache is disabled which include speculative access.*/
#define EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST_M (BIT(0))
#define EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST_V 0x1
#define EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST_S 0
#define EXTMEM_CORE0_DBUS_REJECT_ST_REG (DR_REG_EXTMEM_BASE + 0x090)
/* EXTMEM_CORE0_DBUS_WORLD : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The bit is used to indicate the world of CPU access dbus when
authentication fail. 0: WORLD0 1: WORLD1*/
#define EXTMEM_CORE0_DBUS_WORLD (BIT(3))
#define EXTMEM_CORE0_DBUS_WORLD_M (BIT(3))
#define EXTMEM_CORE0_DBUS_WORLD_V 0x1
#define EXTMEM_CORE0_DBUS_WORLD_S 3
/* EXTMEM_CORE0_DBUS_ATTR : RO ;bitpos:[2:0] ;default: 3'b0 ; */
/*description: The bits are used to indicate the attribute of CPU access dbus
when authentication fail. 0: invalidate 1: execute-able 2: read-able 4: write-able.*/
#define EXTMEM_CORE0_DBUS_ATTR 0x00000007
#define EXTMEM_CORE0_DBUS_ATTR_M ((EXTMEM_CORE0_DBUS_ATTR_V)<<(EXTMEM_CORE0_DBUS_ATTR_S))
#define EXTMEM_CORE0_DBUS_ATTR_V 0x7
#define EXTMEM_CORE0_DBUS_ATTR_S 0
#define EXTMEM_CORE0_DBUS_REJECT_VADDR_REG (DR_REG_EXTMEM_BASE + 0x094)
/* EXTMEM_CORE0_DBUS_VADDR : RO ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: The bits are used to indicate the virtual address of CPU access
dbus when authentication fail.*/
#define EXTMEM_CORE0_DBUS_VADDR 0xFFFFFFFF
#define EXTMEM_CORE0_DBUS_VADDR_M ((EXTMEM_CORE0_DBUS_VADDR_V)<<(EXTMEM_CORE0_DBUS_VADDR_S))
#define EXTMEM_CORE0_DBUS_VADDR_V 0xFFFFFFFF
#define EXTMEM_CORE0_DBUS_VADDR_S 0
#define EXTMEM_CORE0_IBUS_REJECT_ST_REG (DR_REG_EXTMEM_BASE + 0x098)
/* EXTMEM_CORE0_IBUS_WORLD : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The bit is used to indicate the world of CPU access ibus when
authentication fail. 0: WORLD0 1: WORLD1*/
#define EXTMEM_CORE0_IBUS_WORLD (BIT(3))
#define EXTMEM_CORE0_IBUS_WORLD_M (BIT(3))
#define EXTMEM_CORE0_IBUS_WORLD_V 0x1
#define EXTMEM_CORE0_IBUS_WORLD_S 3
/* EXTMEM_CORE0_IBUS_ATTR : RO ;bitpos:[2:0] ;default: 3'b0 ; */
/*description: The bits are used to indicate the attribute of CPU access ibus
when authentication fail. 0: invalidate 1: execute-able 2: read-able*/
#define EXTMEM_CORE0_IBUS_ATTR 0x00000007
#define EXTMEM_CORE0_IBUS_ATTR_M ((EXTMEM_CORE0_IBUS_ATTR_V)<<(EXTMEM_CORE0_IBUS_ATTR_S))
#define EXTMEM_CORE0_IBUS_ATTR_V 0x7
#define EXTMEM_CORE0_IBUS_ATTR_S 0
#define EXTMEM_CORE0_IBUS_REJECT_VADDR_REG (DR_REG_EXTMEM_BASE + 0x09C)
/* EXTMEM_CORE0_IBUS_VADDR : RO ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: The bits are used to indicate the virtual address of CPU access
ibus when authentication fail.*/
#define EXTMEM_CORE0_IBUS_VADDR 0xFFFFFFFF
#define EXTMEM_CORE0_IBUS_VADDR_M ((EXTMEM_CORE0_IBUS_VADDR_V)<<(EXTMEM_CORE0_IBUS_VADDR_S))
#define EXTMEM_CORE0_IBUS_VADDR_V 0xFFFFFFFF
#define EXTMEM_CORE0_IBUS_VADDR_S 0
#define EXTMEM_CACHE_MMU_FAULT_CONTENT_REG (DR_REG_EXTMEM_BASE + 0x0A0)
/* EXTMEM_CACHE_MMU_FAULT_CODE : RO ;bitpos:[13:10] ;default: 4'h0 ; */
/*description: The right-most 3 bits are used to indicate the operations which
cause mmu fault occurrence. 0: default 1: cpu miss 2: preload miss 3: writeback 4: cpu miss evict recovery address 5: load miss evict recovery address 6: external dma tx 7: external dma rx. The most significant bit is used to indicate this operation occurs in which one icache.*/
#define EXTMEM_CACHE_MMU_FAULT_CODE 0x0000000F
#define EXTMEM_CACHE_MMU_FAULT_CODE_M ((EXTMEM_CACHE_MMU_FAULT_CODE_V)<<(EXTMEM_CACHE_MMU_FAULT_CODE_S))
#define EXTMEM_CACHE_MMU_FAULT_CODE_V 0xF
#define EXTMEM_CACHE_MMU_FAULT_CODE_S 10
/* EXTMEM_CACHE_MMU_FAULT_CONTENT : RO ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: The bits are used to indicate the content of mmu entry which cause mmu fault..*/
#define EXTMEM_CACHE_MMU_FAULT_CONTENT 0x000003FF
#define EXTMEM_CACHE_MMU_FAULT_CONTENT_M ((EXTMEM_CACHE_MMU_FAULT_CONTENT_V)<<(EXTMEM_CACHE_MMU_FAULT_CONTENT_S))
#define EXTMEM_CACHE_MMU_FAULT_CONTENT_V 0x3FF
#define EXTMEM_CACHE_MMU_FAULT_CONTENT_S 0
#define EXTMEM_CACHE_MMU_FAULT_VADDR_REG (DR_REG_EXTMEM_BASE + 0x0A4)
/* EXTMEM_CACHE_MMU_FAULT_VADDR : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: The bits are used to indicate the virtual address which cause mmu fault..*/
#define EXTMEM_CACHE_MMU_FAULT_VADDR 0xFFFFFFFF
#define EXTMEM_CACHE_MMU_FAULT_VADDR_M ((EXTMEM_CACHE_MMU_FAULT_VADDR_V)<<(EXTMEM_CACHE_MMU_FAULT_VADDR_S))
#define EXTMEM_CACHE_MMU_FAULT_VADDR_V 0xFFFFFFFF
#define EXTMEM_CACHE_MMU_FAULT_VADDR_S 0
#define EXTMEM_CACHE_WRAP_AROUND_CTRL_REG (DR_REG_EXTMEM_BASE + 0x0A8)
/* EXTMEM_CACHE_FLASH_WRAP_AROUND : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable wrap around mode when read data from flash.*/
#define EXTMEM_CACHE_FLASH_WRAP_AROUND (BIT(0))
#define EXTMEM_CACHE_FLASH_WRAP_AROUND_M (BIT(0))
#define EXTMEM_CACHE_FLASH_WRAP_AROUND_V 0x1
#define EXTMEM_CACHE_FLASH_WRAP_AROUND_S 0
#define EXTMEM_CACHE_MMU_POWER_CTRL_REG (DR_REG_EXTMEM_BASE + 0x0AC)
/* EXTMEM_CACHE_MMU_MEM_FORCE_PU : R/W ;bitpos:[2] ;default: 1'b1 ; */
/*description: The bit is used to power mmu memory down 0: follow_rtc_lslp_pd 1: power up*/
#define EXTMEM_CACHE_MMU_MEM_FORCE_PU (BIT(2))
#define EXTMEM_CACHE_MMU_MEM_FORCE_PU_M (BIT(2))
#define EXTMEM_CACHE_MMU_MEM_FORCE_PU_V 0x1
#define EXTMEM_CACHE_MMU_MEM_FORCE_PU_S 2
/* EXTMEM_CACHE_MMU_MEM_FORCE_PD : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to power mmu memory down 0: follow_rtc_lslp_pd 1: power down*/
#define EXTMEM_CACHE_MMU_MEM_FORCE_PD (BIT(1))
#define EXTMEM_CACHE_MMU_MEM_FORCE_PD_M (BIT(1))
#define EXTMEM_CACHE_MMU_MEM_FORCE_PD_V 0x1
#define EXTMEM_CACHE_MMU_MEM_FORCE_PD_S 1
/* EXTMEM_CACHE_MMU_MEM_FORCE_ON : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to enable clock gating to save power when access
mmu memory 0: enable 1: disable*/
#define EXTMEM_CACHE_MMU_MEM_FORCE_ON (BIT(0))
#define EXTMEM_CACHE_MMU_MEM_FORCE_ON_M (BIT(0))
#define EXTMEM_CACHE_MMU_MEM_FORCE_ON_V 0x1
#define EXTMEM_CACHE_MMU_MEM_FORCE_ON_S 0
#define EXTMEM_CACHE_STATE_REG (DR_REG_EXTMEM_BASE + 0x0B0)
/* EXTMEM_ICACHE_STATE : RO ;bitpos:[11:0] ;default: 12'h1 ; */
/*description: The bit is used to indicate whether icache main fsm is in idle
state or not. 1: in idle state 0: not in idle state*/
#define EXTMEM_ICACHE_STATE 0x00000FFF
#define EXTMEM_ICACHE_STATE_M ((EXTMEM_ICACHE_STATE_V)<<(EXTMEM_ICACHE_STATE_S))
#define EXTMEM_ICACHE_STATE_V 0xFFF
#define EXTMEM_ICACHE_STATE_S 0
#define EXTMEM_CACHE_ENCRYPT_DECRYPT_RECORD_DISABLE_REG (DR_REG_EXTMEM_BASE + 0x0B4)
/* EXTMEM_RECORD_DISABLE_G0CB_DECRYPT : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: Reserved.*/
#define EXTMEM_RECORD_DISABLE_G0CB_DECRYPT (BIT(1))
#define EXTMEM_RECORD_DISABLE_G0CB_DECRYPT_M (BIT(1))
#define EXTMEM_RECORD_DISABLE_G0CB_DECRYPT_V 0x1
#define EXTMEM_RECORD_DISABLE_G0CB_DECRYPT_S 1
/* EXTMEM_RECORD_DISABLE_DB_ENCRYPT : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: Reserved.*/
#define EXTMEM_RECORD_DISABLE_DB_ENCRYPT (BIT(0))
#define EXTMEM_RECORD_DISABLE_DB_ENCRYPT_M (BIT(0))
#define EXTMEM_RECORD_DISABLE_DB_ENCRYPT_V 0x1
#define EXTMEM_RECORD_DISABLE_DB_ENCRYPT_S 0
#define EXTMEM_CACHE_ENCRYPT_DECRYPT_CLK_FORCE_ON_REG (DR_REG_EXTMEM_BASE + 0x0B8)
/* EXTMEM_CLK_FORCE_ON_CRYPT : R/W ;bitpos:[2] ;default: 1'b1 ; */
/*description: The bit is used to close clock gating of external memory encrypt
and decrypt clock. 1: close gating 0: open clock gating.*/
#define EXTMEM_CLK_FORCE_ON_CRYPT (BIT(2))
#define EXTMEM_CLK_FORCE_ON_CRYPT_M (BIT(2))
#define EXTMEM_CLK_FORCE_ON_CRYPT_V 0x1
#define EXTMEM_CLK_FORCE_ON_CRYPT_S 2
/* EXTMEM_CLK_FORCE_ON_AUTO_CRYPT : R/W ;bitpos:[1] ;default: 1'b1 ; */
/*description: The bit is used to close clock gating of automatic crypt clock.
1: close gating 0: open clock gating.*/
#define EXTMEM_CLK_FORCE_ON_AUTO_CRYPT (BIT(1))
#define EXTMEM_CLK_FORCE_ON_AUTO_CRYPT_M (BIT(1))
#define EXTMEM_CLK_FORCE_ON_AUTO_CRYPT_V 0x1
#define EXTMEM_CLK_FORCE_ON_AUTO_CRYPT_S 1
/* EXTMEM_CLK_FORCE_ON_MANUAL_CRYPT : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to close clock gating of manual crypt clock.
1: close gating 0: open clock gating.*/
#define EXTMEM_CLK_FORCE_ON_MANUAL_CRYPT (BIT(0))
#define EXTMEM_CLK_FORCE_ON_MANUAL_CRYPT_M (BIT(0))
#define EXTMEM_CLK_FORCE_ON_MANUAL_CRYPT_V 0x1
#define EXTMEM_CLK_FORCE_ON_MANUAL_CRYPT_S 0
#define EXTMEM_CACHE_PRELOAD_INT_CTRL_REG (DR_REG_EXTMEM_BASE + 0x0BC)
/* EXTMEM_ICACHE_PRELOAD_INT_CLR : WOD ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to clear the interrupt by icache pre-load done.*/
#define EXTMEM_ICACHE_PRELOAD_INT_CLR (BIT(2))
#define EXTMEM_ICACHE_PRELOAD_INT_CLR_M (BIT(2))
#define EXTMEM_ICACHE_PRELOAD_INT_CLR_V 0x1
#define EXTMEM_ICACHE_PRELOAD_INT_CLR_S 2
/* EXTMEM_ICACHE_PRELOAD_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to enable the interrupt by icache pre-load done.*/
#define EXTMEM_ICACHE_PRELOAD_INT_ENA (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_INT_ENA_M (BIT(1))
#define EXTMEM_ICACHE_PRELOAD_INT_ENA_V 0x1
#define EXTMEM_ICACHE_PRELOAD_INT_ENA_S 1
/* EXTMEM_ICACHE_PRELOAD_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to indicate the interrupt by icache pre-load done.*/
#define EXTMEM_ICACHE_PRELOAD_INT_ST (BIT(0))
#define EXTMEM_ICACHE_PRELOAD_INT_ST_M (BIT(0))
#define EXTMEM_ICACHE_PRELOAD_INT_ST_V 0x1
#define EXTMEM_ICACHE_PRELOAD_INT_ST_S 0
#define EXTMEM_CACHE_SYNC_INT_CTRL_REG (DR_REG_EXTMEM_BASE + 0x0C0)
/* EXTMEM_ICACHE_SYNC_INT_CLR : WOD ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to clear the interrupt by icache sync done.*/
#define EXTMEM_ICACHE_SYNC_INT_CLR (BIT(2))
#define EXTMEM_ICACHE_SYNC_INT_CLR_M (BIT(2))
#define EXTMEM_ICACHE_SYNC_INT_CLR_V 0x1
#define EXTMEM_ICACHE_SYNC_INT_CLR_S 2
/* EXTMEM_ICACHE_SYNC_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to enable the interrupt by icache sync done.*/
#define EXTMEM_ICACHE_SYNC_INT_ENA (BIT(1))
#define EXTMEM_ICACHE_SYNC_INT_ENA_M (BIT(1))
#define EXTMEM_ICACHE_SYNC_INT_ENA_V 0x1
#define EXTMEM_ICACHE_SYNC_INT_ENA_S 1
/* EXTMEM_ICACHE_SYNC_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to indicate the interrupt by icache sync done.*/
#define EXTMEM_ICACHE_SYNC_INT_ST (BIT(0))
#define EXTMEM_ICACHE_SYNC_INT_ST_M (BIT(0))
#define EXTMEM_ICACHE_SYNC_INT_ST_V 0x1
#define EXTMEM_ICACHE_SYNC_INT_ST_S 0
#define EXTMEM_CACHE_MMU_OWNER_REG (DR_REG_EXTMEM_BASE + 0x0C4)
/* EXTMEM_CACHE_MMU_OWNER : R/W ;bitpos:[3:0] ;default: 4'h0 ; */
/*description: The bits are used to specify the owner of MMU.bit0/bit2: ibus bit1/bit3: dbus*/
#define EXTMEM_CACHE_MMU_OWNER 0x0000000F
#define EXTMEM_CACHE_MMU_OWNER_M ((EXTMEM_CACHE_MMU_OWNER_V)<<(EXTMEM_CACHE_MMU_OWNER_S))
#define EXTMEM_CACHE_MMU_OWNER_V 0xF
#define EXTMEM_CACHE_MMU_OWNER_S 0
#define EXTMEM_CACHE_CONF_MISC_REG (DR_REG_EXTMEM_BASE + 0x0C8)
/* EXTMEM_CACHE_TRACE_ENA : R/W ;bitpos:[2] ;default: 1'b1 ; */
/*description: The bit is used to enable cache trace function.*/
#define EXTMEM_CACHE_TRACE_ENA (BIT(2))
#define EXTMEM_CACHE_TRACE_ENA_M (BIT(2))
#define EXTMEM_CACHE_TRACE_ENA_V 0x1
#define EXTMEM_CACHE_TRACE_ENA_S 2
/* EXTMEM_CACHE_IGNORE_SYNC_MMU_ENTRY_FAULT : R/W ;bitpos:[1] ;default: 1'b1 ; */
/*description: The bit is used to disable checking mmu entry fault by sync operation.*/
#define EXTMEM_CACHE_IGNORE_SYNC_MMU_ENTRY_FAULT (BIT(1))
#define EXTMEM_CACHE_IGNORE_SYNC_MMU_ENTRY_FAULT_M (BIT(1))
#define EXTMEM_CACHE_IGNORE_SYNC_MMU_ENTRY_FAULT_V 0x1
#define EXTMEM_CACHE_IGNORE_SYNC_MMU_ENTRY_FAULT_S 1
/* EXTMEM_CACHE_IGNORE_PRELOAD_MMU_ENTRY_FAULT : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to disable checking mmu entry fault by preload operation.*/
#define EXTMEM_CACHE_IGNORE_PRELOAD_MMU_ENTRY_FAULT (BIT(0))
#define EXTMEM_CACHE_IGNORE_PRELOAD_MMU_ENTRY_FAULT_M (BIT(0))
#define EXTMEM_CACHE_IGNORE_PRELOAD_MMU_ENTRY_FAULT_V 0x1
#define EXTMEM_CACHE_IGNORE_PRELOAD_MMU_ENTRY_FAULT_S 0
#define EXTMEM_ICACHE_FREEZE_REG (DR_REG_EXTMEM_BASE + 0x0CC)
/* EXTMEM_ICACHE_FREEZE_DONE : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The bit is used to indicate icache freeze success*/
#define EXTMEM_ICACHE_FREEZE_DONE (BIT(2))
#define EXTMEM_ICACHE_FREEZE_DONE_M (BIT(2))
#define EXTMEM_ICACHE_FREEZE_DONE_V 0x1
#define EXTMEM_ICACHE_FREEZE_DONE_S 2
/* EXTMEM_ICACHE_FREEZE_MODE : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The bit is used to configure freeze mode 0: assert busy if
CPU miss 1: assert hit if CPU miss*/
#define EXTMEM_ICACHE_FREEZE_MODE (BIT(1))
#define EXTMEM_ICACHE_FREEZE_MODE_M (BIT(1))
#define EXTMEM_ICACHE_FREEZE_MODE_V 0x1
#define EXTMEM_ICACHE_FREEZE_MODE_S 1
/* EXTMEM_ICACHE_FREEZE_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to enable icache freeze mode*/
#define EXTMEM_ICACHE_FREEZE_ENA (BIT(0))
#define EXTMEM_ICACHE_FREEZE_ENA_M (BIT(0))
#define EXTMEM_ICACHE_FREEZE_ENA_V 0x1
#define EXTMEM_ICACHE_FREEZE_ENA_S 0
#define EXTMEM_ICACHE_ATOMIC_OPERATE_ENA_REG (DR_REG_EXTMEM_BASE + 0x0D0)
/* EXTMEM_ICACHE_ATOMIC_OPERATE_ENA : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: The bit is used to activate icache atomic operation protection.
In this case sync/lock operation can not interrupt miss-work. This feature does not work during invalidateAll operation.*/
#define EXTMEM_ICACHE_ATOMIC_OPERATE_ENA (BIT(0))
#define EXTMEM_ICACHE_ATOMIC_OPERATE_ENA_M (BIT(0))
#define EXTMEM_ICACHE_ATOMIC_OPERATE_ENA_V 0x1
#define EXTMEM_ICACHE_ATOMIC_OPERATE_ENA_S 0
#define EXTMEM_CACHE_REQUEST_REG (DR_REG_EXTMEM_BASE + 0x0D4)
/* EXTMEM_CACHE_REQUEST_BYPASS : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to disable request recording which could cause performance issue*/
#define EXTMEM_CACHE_REQUEST_BYPASS (BIT(0))
#define EXTMEM_CACHE_REQUEST_BYPASS_M (BIT(0))
#define EXTMEM_CACHE_REQUEST_BYPASS_V 0x1
#define EXTMEM_CACHE_REQUEST_BYPASS_S 0
#define EXTMEM_IBUS_PMS_TBL_LOCK_REG (DR_REG_EXTMEM_BASE + 0x0D8)
/* EXTMEM_IBUS_PMS_LOCK : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to configure the ibus permission control section boundary0*/
#define EXTMEM_IBUS_PMS_LOCK (BIT(0))
#define EXTMEM_IBUS_PMS_LOCK_M (BIT(0))
#define EXTMEM_IBUS_PMS_LOCK_V 0x1
#define EXTMEM_IBUS_PMS_LOCK_S 0
#define EXTMEM_IBUS_PMS_TBL_BOUNDARY0_REG (DR_REG_EXTMEM_BASE + 0x0DC)
/* EXTMEM_IBUS_PMS_BOUNDARY0 : R/W ;bitpos:[11:0] ;default: 12'h0 ; */
/*description: The bit is used to configure the ibus permission control section boundary0*/
#define EXTMEM_IBUS_PMS_BOUNDARY0 0x00000FFF
#define EXTMEM_IBUS_PMS_BOUNDARY0_M ((EXTMEM_IBUS_PMS_BOUNDARY0_V)<<(EXTMEM_IBUS_PMS_BOUNDARY0_S))
#define EXTMEM_IBUS_PMS_BOUNDARY0_V 0xFFF
#define EXTMEM_IBUS_PMS_BOUNDARY0_S 0
#define EXTMEM_IBUS_PMS_TBL_BOUNDARY1_REG (DR_REG_EXTMEM_BASE + 0x0E0)
/* EXTMEM_IBUS_PMS_BOUNDARY1 : R/W ;bitpos:[11:0] ;default: 12'h800 ; */
/*description: The bit is used to configure the ibus permission control section boundary1*/
#define EXTMEM_IBUS_PMS_BOUNDARY1 0x00000FFF
#define EXTMEM_IBUS_PMS_BOUNDARY1_M ((EXTMEM_IBUS_PMS_BOUNDARY1_V)<<(EXTMEM_IBUS_PMS_BOUNDARY1_S))
#define EXTMEM_IBUS_PMS_BOUNDARY1_V 0xFFF
#define EXTMEM_IBUS_PMS_BOUNDARY1_S 0
#define EXTMEM_IBUS_PMS_TBL_BOUNDARY2_REG (DR_REG_EXTMEM_BASE + 0x0E4)
/* EXTMEM_IBUS_PMS_BOUNDARY2 : R/W ;bitpos:[11:0] ;default: 12'h800 ; */
/*description: The bit is used to configure the ibus permission control section boundary2*/
#define EXTMEM_IBUS_PMS_BOUNDARY2 0x00000FFF
#define EXTMEM_IBUS_PMS_BOUNDARY2_M ((EXTMEM_IBUS_PMS_BOUNDARY2_V)<<(EXTMEM_IBUS_PMS_BOUNDARY2_S))
#define EXTMEM_IBUS_PMS_BOUNDARY2_V 0xFFF
#define EXTMEM_IBUS_PMS_BOUNDARY2_S 0
#define EXTMEM_IBUS_PMS_TBL_ATTR_REG (DR_REG_EXTMEM_BASE + 0x0E8)
/* EXTMEM_IBUS_PMS_SCT2_ATTR : R/W ;bitpos:[7:4] ;default: 4'hF ; */
/*description: The bit is used to configure attribute of the ibus permission
control section2 bit0: fetch in world0 bit1: load in world0 bit2: fetch in world1 bit3: load in world1*/
#define EXTMEM_IBUS_PMS_SCT2_ATTR 0x0000000F
#define EXTMEM_IBUS_PMS_SCT2_ATTR_M ((EXTMEM_IBUS_PMS_SCT2_ATTR_V)<<(EXTMEM_IBUS_PMS_SCT2_ATTR_S))
#define EXTMEM_IBUS_PMS_SCT2_ATTR_V 0xF
#define EXTMEM_IBUS_PMS_SCT2_ATTR_S 4
/* EXTMEM_IBUS_PMS_SCT1_ATTR : R/W ;bitpos:[3:0] ;default: 4'hF ; */
/*description: The bit is used to configure attribute of the ibus permission
control section1 bit0: fetch in world0 bit1: load in world0 bit2: fetch in world1 bit3: load in world1*/
#define EXTMEM_IBUS_PMS_SCT1_ATTR 0x0000000F
#define EXTMEM_IBUS_PMS_SCT1_ATTR_M ((EXTMEM_IBUS_PMS_SCT1_ATTR_V)<<(EXTMEM_IBUS_PMS_SCT1_ATTR_S))
#define EXTMEM_IBUS_PMS_SCT1_ATTR_V 0xF
#define EXTMEM_IBUS_PMS_SCT1_ATTR_S 0
#define EXTMEM_DBUS_PMS_TBL_LOCK_REG (DR_REG_EXTMEM_BASE + 0x0EC)
/* EXTMEM_DBUS_PMS_LOCK : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The bit is used to configure the ibus permission control section boundary0*/
#define EXTMEM_DBUS_PMS_LOCK (BIT(0))
#define EXTMEM_DBUS_PMS_LOCK_M (BIT(0))
#define EXTMEM_DBUS_PMS_LOCK_V 0x1
#define EXTMEM_DBUS_PMS_LOCK_S 0
#define EXTMEM_DBUS_PMS_TBL_BOUNDARY0_REG (DR_REG_EXTMEM_BASE + 0x0F0)
/* EXTMEM_DBUS_PMS_BOUNDARY0 : R/W ;bitpos:[11:0] ;default: 12'h0 ; */
/*description: The bit is used to configure the dbus permission control section boundary0*/
#define EXTMEM_DBUS_PMS_BOUNDARY0 0x00000FFF
#define EXTMEM_DBUS_PMS_BOUNDARY0_M ((EXTMEM_DBUS_PMS_BOUNDARY0_V)<<(EXTMEM_DBUS_PMS_BOUNDARY0_S))
#define EXTMEM_DBUS_PMS_BOUNDARY0_V 0xFFF
#define EXTMEM_DBUS_PMS_BOUNDARY0_S 0
#define EXTMEM_DBUS_PMS_TBL_BOUNDARY1_REG (DR_REG_EXTMEM_BASE + 0x0F4)
/* EXTMEM_DBUS_PMS_BOUNDARY1 : R/W ;bitpos:[11:0] ;default: 12'h800 ; */
/*description: The bit is used to configure the dbus permission control section boundary1*/
#define EXTMEM_DBUS_PMS_BOUNDARY1 0x00000FFF
#define EXTMEM_DBUS_PMS_BOUNDARY1_M ((EXTMEM_DBUS_PMS_BOUNDARY1_V)<<(EXTMEM_DBUS_PMS_BOUNDARY1_S))
#define EXTMEM_DBUS_PMS_BOUNDARY1_V 0xFFF
#define EXTMEM_DBUS_PMS_BOUNDARY1_S 0
#define EXTMEM_DBUS_PMS_TBL_BOUNDARY2_REG (DR_REG_EXTMEM_BASE + 0x0F8)
/* EXTMEM_DBUS_PMS_BOUNDARY2 : R/W ;bitpos:[11:0] ;default: 12'h800 ; */
/*description: The bit is used to configure the dbus permission control section boundary2*/
#define EXTMEM_DBUS_PMS_BOUNDARY2 0x00000FFF
#define EXTMEM_DBUS_PMS_BOUNDARY2_M ((EXTMEM_DBUS_PMS_BOUNDARY2_V)<<(EXTMEM_DBUS_PMS_BOUNDARY2_S))
#define EXTMEM_DBUS_PMS_BOUNDARY2_V 0xFFF
#define EXTMEM_DBUS_PMS_BOUNDARY2_S 0
#define EXTMEM_DBUS_PMS_TBL_ATTR_REG (DR_REG_EXTMEM_BASE + 0x0FC)
/* EXTMEM_DBUS_PMS_SCT2_ATTR : R/W ;bitpos:[3:2] ;default: 2'd3 ; */
/*description: The bit is used to configure attribute of the dbus permission
control section2 bit0: load in world0 bit2: load in world1*/
#define EXTMEM_DBUS_PMS_SCT2_ATTR 0x00000003
#define EXTMEM_DBUS_PMS_SCT2_ATTR_M ((EXTMEM_DBUS_PMS_SCT2_ATTR_V)<<(EXTMEM_DBUS_PMS_SCT2_ATTR_S))
#define EXTMEM_DBUS_PMS_SCT2_ATTR_V 0x3
#define EXTMEM_DBUS_PMS_SCT2_ATTR_S 2
/* EXTMEM_DBUS_PMS_SCT1_ATTR : R/W ;bitpos:[1:0] ;default: 2'd3 ; */
/*description: The bit is used to configure attribute of the dbus permission
control section1 bit0: load in world0 bit2: load in world1*/
#define EXTMEM_DBUS_PMS_SCT1_ATTR 0x00000003
#define EXTMEM_DBUS_PMS_SCT1_ATTR_M ((EXTMEM_DBUS_PMS_SCT1_ATTR_V)<<(EXTMEM_DBUS_PMS_SCT1_ATTR_S))
#define EXTMEM_DBUS_PMS_SCT1_ATTR_V 0x3
#define EXTMEM_DBUS_PMS_SCT1_ATTR_S 0
#define EXTMEM_CLOCK_GATE_REG (DR_REG_EXTMEM_BASE + 0x100)
/* EXTMEM_CLK_EN : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: Reserved.*/
#define EXTMEM_CLK_EN (BIT(0))
#define EXTMEM_CLK_EN_M (BIT(0))
#define EXTMEM_CLK_EN_V 0x1
#define EXTMEM_CLK_EN_S 0
#define EXTMEM_DATE_REG (DR_REG_EXTMEM_BASE + 0x3FC)
/* EXTMEM_DATE : R/W ;bitpos:[27:0] ;default: 28'h2007160 ; */
/*description: Reserved.*/
#define EXTMEM_DATE 0x0FFFFFFF
#define EXTMEM_DATE_M ((EXTMEM_DATE_V)<<(EXTMEM_DATE_S))
#define EXTMEM_DATE_V 0xFFFFFFF
#define EXTMEM_DATE_S 0
#ifdef __cplusplus
}
#endif
#endif /*_SOC_EXTMEM_REG_H_ */
Reference in New Issue View Git Blame Copy Permalink