esp-idf/examples/bluetooth/a2dp_sink/main/main.c

145 lines
4.6 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "nvs.h"
#include "nvs_flash.h"
#include "esp_system.h"
#include "esp_log.h"
#include "esp_bt.h"
#include "bt_app_core.h"
#include "bt_app_av.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_gap_bt_api.h"
#include "esp_a2dp_api.h"
#include "esp_avrc_api.h"
#include "driver/i2s.h"
/* event for handler "bt_av_hdl_stack_up */
enum {
BT_APP_EVT_STACK_UP = 0,
};
/* handler for bluetooth stack enabled events */
static void bt_av_hdl_stack_evt(uint16_t event, void *p_param);
void app_main()
{
/* Initialize NVS — it is used to store PHY calibration data */
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK( ret );
i2s_config_t i2s_config = {
#ifdef CONFIG_A2DP_SINK_OUTPUT_INTERNAL_DAC
.mode = I2S_MODE_DAC_BUILT_IN,
#else
.mode = I2S_MODE_MASTER | I2S_MODE_TX, // Only TX
#endif
.sample_rate = 44100,
.bits_per_sample = 16,
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT, //2-channels
.communication_format = I2S_COMM_FORMAT_I2S | I2S_COMM_FORMAT_I2S_MSB,
.dma_buf_count = 6,
.dma_buf_len = 60, //
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 //Interrupt level 1
};
i2s_driver_install(0, &i2s_config, 0, NULL);
#ifdef CONFIG_A2DP_SINK_OUTPUT_INTERNAL_DAC
i2s_set_pin(0, NULL);
#else
i2s_pin_config_t pin_config = {
.bck_io_num = CONFIG_I2S_BCK_PIN,
.ws_io_num = CONFIG_I2S_LRCK_PIN,
.data_out_num = CONFIG_I2S_DATA_PIN,
.data_in_num = -1 //Not used
};
i2s_set_pin(0, &pin_config);
#endif
ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_BLE));
esp_err_t err;
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
if ((err = esp_bt_controller_init(&bt_cfg)) != ESP_OK) {
ESP_LOGE(BT_AV_TAG, "%s initialize controller failed: %s\n", __func__, esp_err_to_name(ret));
return;
}
if ((err = esp_bt_controller_enable(ESP_BT_MODE_CLASSIC_BT)) != ESP_OK) {
ESP_LOGE(BT_AV_TAG, "%s enable controller failed: %s\n", __func__, esp_err_to_name(ret));
return;
}
if ((err = esp_bluedroid_init()) != ESP_OK) {
ESP_LOGE(BT_AV_TAG, "%s initialize bluedroid failed: %s\n", __func__, esp_err_to_name(ret));
return;
}
if ((err = esp_bluedroid_enable()) != ESP_OK) {
ESP_LOGE(BT_AV_TAG, "%s enable bluedroid failed: %s\n", __func__, esp_err_to_name(ret));
return;
}
/* create application task */
bt_app_task_start_up();
/* Bluetooth device name, connection mode and profile set up */
bt_app_work_dispatch(bt_av_hdl_stack_evt, BT_APP_EVT_STACK_UP, NULL, 0, NULL);
}
static void bt_av_hdl_stack_evt(uint16_t event, void *p_param)
{
ESP_LOGD(BT_AV_TAG, "%s evt %d", __func__, event);
switch (event) {
case BT_APP_EVT_STACK_UP: {
/* set up device name */
char *dev_name = "ESP_SPEAKER";
esp_bt_dev_set_device_name(dev_name);
/* initialize A2DP sink */
esp_a2d_register_callback(&bt_app_a2d_cb);
esp_a2d_sink_register_data_callback(bt_app_a2d_data_cb);
esp_a2d_sink_init();
/* initialize AVRCP controller */
esp_avrc_ct_init();
esp_avrc_ct_register_callback(bt_app_rc_ct_cb);
/* set discoverable and connectable mode, wait to be connected */
esp_bt_gap_set_scan_mode(ESP_BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE);
break;
}
default:
ESP_LOGE(BT_AV_TAG, "%s unhandled evt %d", __func__, event);
break;
}
}