mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
f8500f77b1
By design, it's 12 dB. There're errors among chips, so the actual attenuation will be 11dB more or less
266 lines
10 KiB
C
266 lines
10 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "esp_log.h"
|
|
#include "soc/adc_periph.h"
|
|
#include "esp_adc/adc_oneshot.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/rtc_io.h"
|
|
#include "test_common_adc.h"
|
|
|
|
const __attribute__((unused)) static char *TAG = "TEST_ADC";
|
|
|
|
/*---------------------------------------------------------------
|
|
ADC General Macros
|
|
---------------------------------------------------------------*/
|
|
//ADC Channels
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define ADC1_TEST_CHAN0 ADC_CHANNEL_4
|
|
#define ADC1_TEST_CHAN1 ADC_CHANNEL_5
|
|
#define ADC2_TEST_CHAN0 ADC_CHANNEL_0
|
|
static const char *TAG_CH[2][10] = {{"ADC1_CH4", "ADC1_CH5"}, {"ADC2_CH0"}};
|
|
#else
|
|
#define ADC1_TEST_CHAN0 ADC_CHANNEL_2
|
|
#define ADC1_TEST_CHAN1 ADC_CHANNEL_3
|
|
#define ADC2_TEST_CHAN0 ADC_CHANNEL_0
|
|
static const char *TAG_CH[2][10] = {{"ADC1_CH2", "ADC1_CH3"}, {"ADC2_CH0"}};
|
|
#endif
|
|
|
|
|
|
/*---------------------------------------------------------------
|
|
ADC Oneshot High / Low test
|
|
---------------------------------------------------------------*/
|
|
//ESP32C3 ADC2 oneshot mode is not supported anymore
|
|
#define ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2 ((SOC_ADC_PERIPH_NUM >= 2) && !CONFIG_IDF_TARGET_ESP32C3)
|
|
|
|
TEST_CASE("ADC oneshot high/low test", "[adc_oneshot]")
|
|
{
|
|
static int adc_raw[2][10];
|
|
|
|
//-------------ADC1 Init---------------//
|
|
adc_oneshot_unit_handle_t adc1_handle;
|
|
adc_oneshot_unit_init_cfg_t init_config1 = {
|
|
.unit_id = ADC_UNIT_1,
|
|
.ulp_mode = ADC_ULP_MODE_DISABLE,
|
|
};
|
|
TEST_ESP_OK(adc_oneshot_new_unit(&init_config1, &adc1_handle));
|
|
|
|
#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
//-------------ADC2 Init---------------//
|
|
adc_oneshot_unit_handle_t adc2_handle;
|
|
adc_oneshot_unit_init_cfg_t init_config2 = {
|
|
.unit_id = ADC_UNIT_2,
|
|
.ulp_mode = ADC_ULP_MODE_DISABLE,
|
|
};
|
|
TEST_ESP_OK(adc_oneshot_new_unit(&init_config2, &adc2_handle));
|
|
#endif //#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
|
|
//-------------ADC1 TEST Channel 0 Config---------------//
|
|
adc_oneshot_chan_cfg_t config = {
|
|
.bitwidth = ADC_BITWIDTH_DEFAULT,
|
|
.atten = ADC_ATTEN_DB_12,
|
|
};
|
|
TEST_ESP_OK(adc_oneshot_config_channel(adc1_handle, ADC1_TEST_CHAN0, &config));
|
|
|
|
//-------------ADC1 TEST Channel 1 Config---------------//
|
|
TEST_ESP_OK(adc_oneshot_config_channel(adc1_handle, ADC1_TEST_CHAN1, &config));
|
|
|
|
#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
//-------------ADC2 TEST Channel 0 Config---------------//
|
|
TEST_ESP_OK(adc_oneshot_config_channel(adc2_handle, ADC2_TEST_CHAN0, &config));
|
|
#endif //#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
|
|
test_adc_set_io_level(ADC_UNIT_1, ADC1_TEST_CHAN0, 0);
|
|
TEST_ESP_OK(adc_oneshot_read(adc1_handle, ADC1_TEST_CHAN0, &adc_raw[0][0]));
|
|
ESP_LOGI(TAG_CH[0][0], "raw data: %d", adc_raw[0][0]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_LOW_THRESH, ADC_TEST_LOW_VAL, adc_raw[0][0]);
|
|
|
|
test_adc_set_io_level(ADC_UNIT_1, ADC1_TEST_CHAN1, 1);
|
|
TEST_ESP_OK(adc_oneshot_read(adc1_handle, ADC1_TEST_CHAN1, &adc_raw[0][1]));
|
|
ESP_LOGI(TAG_CH[0][1], "raw data: %d", adc_raw[0][1]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_HIGH_THRESH, ADC_TEST_HIGH_VAL, adc_raw[0][1]);
|
|
|
|
#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
test_adc_set_io_level(ADC_UNIT_2, ADC2_TEST_CHAN0, 0);
|
|
TEST_ESP_OK(adc_oneshot_read(adc2_handle, ADC2_TEST_CHAN0, &adc_raw[1][0]));
|
|
ESP_LOGI(TAG_CH[1][0], "raw data: %d", adc_raw[1][0]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_LOW_THRESH, ADC_TEST_LOW_VAL, adc_raw[1][0]);
|
|
#endif //#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
|
|
|
|
test_adc_set_io_level(ADC_UNIT_1, ADC1_TEST_CHAN0, 1);
|
|
TEST_ESP_OK(adc_oneshot_read(adc1_handle, ADC1_TEST_CHAN0, &adc_raw[0][0]));
|
|
ESP_LOGI(TAG_CH[0][0], "raw data: %d", adc_raw[0][0]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_HIGH_THRESH, ADC_TEST_HIGH_VAL, adc_raw[0][0]);
|
|
|
|
test_adc_set_io_level(ADC_UNIT_1, ADC1_TEST_CHAN1, 0);
|
|
TEST_ESP_OK(adc_oneshot_read(adc1_handle, ADC1_TEST_CHAN1, &adc_raw[0][1]));
|
|
ESP_LOGI(TAG_CH[0][1], "raw data: %d", adc_raw[0][1]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_LOW_THRESH, ADC_TEST_LOW_VAL, adc_raw[0][1]);
|
|
|
|
#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
test_adc_set_io_level(ADC_UNIT_2, ADC2_TEST_CHAN0, 1);
|
|
TEST_ESP_OK(adc_oneshot_read(adc2_handle, ADC2_TEST_CHAN0, &adc_raw[1][0]));
|
|
ESP_LOGI(TAG_CH[1][0], "raw data: %d", adc_raw[1][0]);
|
|
TEST_ASSERT_INT_WITHIN(ADC_TEST_HIGH_THRESH, ADC_TEST_HIGH_VAL, adc_raw[1][0]);
|
|
#endif //#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
|
|
|
|
TEST_ESP_OK(adc_oneshot_del_unit(adc1_handle));
|
|
#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
TEST_ESP_OK(adc_oneshot_del_unit(adc2_handle));
|
|
#endif //#if ADC_TEST_ONESHOT_HIGH_LOW_TEST_ADC2
|
|
}
|
|
|
|
|
|
|
|
#if SOC_ADC_CALIBRATION_V1_SUPPORTED
|
|
/*---------------------------------------------------------------
|
|
ADC Oneshot with Light Sleep
|
|
---------------------------------------------------------------*/
|
|
#include <inttypes.h>
|
|
#include "esp_sleep.h"
|
|
#include "esp_private/regi2c_ctrl.h"
|
|
#include "soc/regi2c_saradc.h"
|
|
|
|
#define TEST_REGI2C_ANA_CALI_BYTE_NUM 8
|
|
|
|
static void s_adc_oneshot_with_sleep(adc_unit_t unit_id, adc_channel_t channel)
|
|
{
|
|
//-------------ADC Init---------------//
|
|
adc_oneshot_unit_handle_t adc_handle;
|
|
adc_oneshot_unit_init_cfg_t init_config = {
|
|
.unit_id = unit_id,
|
|
.ulp_mode = ADC_ULP_MODE_DISABLE,
|
|
};
|
|
TEST_ESP_OK(adc_oneshot_new_unit(&init_config, &adc_handle));
|
|
|
|
//-------------ADC Channel Config---------------//
|
|
adc_oneshot_chan_cfg_t config = {
|
|
.bitwidth = SOC_ADC_RTC_MAX_BITWIDTH,
|
|
};
|
|
|
|
//-------------ADC Calibration Init---------------//
|
|
bool do_calibration = false;
|
|
adc_cali_handle_t cali_handle[TEST_ATTEN_NUMS] = {};
|
|
for (int i = 0; i < TEST_ATTEN_NUMS; i++) {
|
|
do_calibration = test_adc_calibration_init(unit_id, g_test_atten[i], SOC_ADC_RTC_MAX_BITWIDTH, &cali_handle[i]);
|
|
}
|
|
if (!do_calibration) {
|
|
ESP_LOGW(TAG, "No efuse bits burnt, only test the regi2c analog register values");
|
|
}
|
|
|
|
for (int i = 0; i < TEST_ATTEN_NUMS; i++) {
|
|
|
|
//-------------ADC Channel Config---------------//
|
|
config.atten = g_test_atten[i];
|
|
TEST_ESP_OK(adc_oneshot_config_channel(adc_handle, channel, &config));
|
|
printf("Test with atten: %d\n", g_test_atten[i]);
|
|
|
|
//---------------------------------Before Sleep-----------------------------------//
|
|
printf("Before Light Sleep\n");
|
|
int raw_expected = 0;
|
|
int cali_expected = 0;
|
|
uint8_t regi2c_cali_val_before[TEST_REGI2C_ANA_CALI_BYTE_NUM] = {};
|
|
|
|
//Read
|
|
TEST_ESP_OK(adc_oneshot_read(adc_handle, channel, &raw_expected));
|
|
if (do_calibration) {
|
|
TEST_ESP_OK(adc_cali_raw_to_voltage(cali_handle[i], raw_expected, &cali_expected));
|
|
}
|
|
|
|
//Print regi2c
|
|
printf("regi2c cali val is: ");
|
|
for (int j = 0; j < TEST_REGI2C_ANA_CALI_BYTE_NUM; j++) {
|
|
regi2c_cali_val_before[j] = regi2c_ctrl_read_reg(I2C_SAR_ADC, I2C_SAR_ADC_HOSTID, j);
|
|
printf("0x%x ", regi2c_cali_val_before[j]);
|
|
}
|
|
printf("\n");
|
|
|
|
//Print result
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: raw data: %d", unit_id + 1, channel, raw_expected);
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: cali data: %d", unit_id + 1, channel, cali_expected);
|
|
|
|
//---------------------------------Sleep-----------------------------------//
|
|
esp_sleep_enable_timer_wakeup(30 * 1000);
|
|
esp_light_sleep_start();
|
|
|
|
//---------------------------------After Sleep-----------------------------------//
|
|
printf("After Light Sleep\n");
|
|
int raw_after_sleep = 0;
|
|
int cali_after_sleep = 0;
|
|
uint8_t regi2c_cali_val_after[TEST_REGI2C_ANA_CALI_BYTE_NUM] = {};
|
|
|
|
//Print regi2c
|
|
printf("regi2c cali val is: ");
|
|
for (int i = 0; i < TEST_REGI2C_ANA_CALI_BYTE_NUM; i++) {
|
|
regi2c_cali_val_after[i] = regi2c_ctrl_read_reg(I2C_SAR_ADC, I2C_SAR_ADC_HOSTID, i);
|
|
printf("0x%x ", regi2c_cali_val_after[i]);
|
|
}
|
|
printf("\n");
|
|
|
|
//Read
|
|
TEST_ESP_OK(adc_oneshot_read(adc_handle, channel, &raw_after_sleep));
|
|
if (do_calibration) {
|
|
TEST_ESP_OK(adc_cali_raw_to_voltage(cali_handle[i], raw_after_sleep, &cali_after_sleep));
|
|
}
|
|
|
|
//Print result
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: raw data: %d", unit_id + 1, channel, raw_after_sleep);
|
|
if (do_calibration) {
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: cali data: %d", unit_id + 1, channel, cali_after_sleep);
|
|
}
|
|
|
|
//Compare
|
|
int32_t raw_diff = raw_expected - raw_after_sleep;
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: raw difference: %"PRId32, unit_id + 1, channel, raw_diff);
|
|
|
|
if (do_calibration) {
|
|
int32_t cali_diff = cali_expected - cali_after_sleep;
|
|
ESP_LOGI(TAG, "ADC%d Chan%d: cali difference: %"PRId32, unit_id + 1, channel, cali_diff);
|
|
}
|
|
|
|
//Test Calibration registers
|
|
for (int i = 0; i < TEST_REGI2C_ANA_CALI_BYTE_NUM; i++) {
|
|
TEST_ASSERT_EQUAL(regi2c_cali_val_before[i], regi2c_cali_val_after[i]);
|
|
}
|
|
ESP_LOGI(TAG, "Cali register settings unchanged\n");
|
|
|
|
}
|
|
TEST_ESP_OK(adc_oneshot_del_unit(adc_handle));
|
|
for (int i = 0; i < TEST_ATTEN_NUMS; i++) {
|
|
if (cali_handle[i]) {
|
|
test_adc_calibration_deinit(cali_handle[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
//ADC Channels
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define ADC1_SLEEP_TEST_CHAN ADC_CHANNEL_6
|
|
#define ADC2_SLEEP_TEST_CHAN ADC_CHANNEL_0
|
|
#else
|
|
#define ADC1_SLEEP_TEST_CHAN ADC_CHANNEL_2
|
|
#define ADC2_SLEEP_TEST_CHAN ADC_CHANNEL_0
|
|
#endif
|
|
|
|
TEST_CASE("test ADC1 Single Read with Light Sleep", "[adc][manul][ignore]")
|
|
{
|
|
s_adc_oneshot_with_sleep(ADC_UNIT_1, ADC1_SLEEP_TEST_CHAN);
|
|
}
|
|
|
|
#if (SOC_ADC_PERIPH_NUM >= 2) && !CONFIG_IDF_TARGET_ESP32C3
|
|
//ESP32C3 ADC2 oneshot mode is not supported anymore
|
|
TEST_CASE("test ADC2 Single Read with Light Sleep", "[adc][manul][ignore]")
|
|
{
|
|
s_adc_oneshot_with_sleep(ADC_UNIT_2, ADC2_SLEEP_TEST_CHAN);
|
|
}
|
|
#endif //#if (SOC_ADC_PERIPH_NUM >= 2) && !CONFIG_IDF_TARGET_ESP32C3
|
|
|
|
#endif //#if SOC_ADC_CALIBRATION_V1_SUPPORTED
|