mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
1221 lines
61 KiB
C
1221 lines
61 KiB
C
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#ifndef _SOC_SPI_MEM_REG_H_
|
|
#define _SOC_SPI_MEM_REG_H_
|
|
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
#include "soc.h"
|
|
#define SPI_MEM_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x000)
|
|
/* SPI_MEM_FLASH_READ : R/W/SC ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: Read flash enable. Read flash operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_READ (BIT(31))
|
|
#define SPI_MEM_FLASH_READ_M (BIT(31))
|
|
#define SPI_MEM_FLASH_READ_V 0x1
|
|
#define SPI_MEM_FLASH_READ_S 31
|
|
/* SPI_MEM_FLASH_WREN : R/W/SC ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: Write flash enable. Write enable command will be sent when the
|
|
bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WREN (BIT(30))
|
|
#define SPI_MEM_FLASH_WREN_M (BIT(30))
|
|
#define SPI_MEM_FLASH_WREN_V 0x1
|
|
#define SPI_MEM_FLASH_WREN_S 30
|
|
/* SPI_MEM_FLASH_WRDI : R/W/SC ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: Write flash disable. Write disable command will be sent when
|
|
the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WRDI (BIT(29))
|
|
#define SPI_MEM_FLASH_WRDI_M (BIT(29))
|
|
#define SPI_MEM_FLASH_WRDI_V 0x1
|
|
#define SPI_MEM_FLASH_WRDI_S 29
|
|
/* SPI_MEM_FLASH_RDID : R/W/SC ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: Read JEDEC ID . Read ID command will be sent when the bit is
|
|
set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RDID (BIT(28))
|
|
#define SPI_MEM_FLASH_RDID_M (BIT(28))
|
|
#define SPI_MEM_FLASH_RDID_V 0x1
|
|
#define SPI_MEM_FLASH_RDID_S 28
|
|
/* SPI_MEM_FLASH_RDSR : R/W/SC ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: Read status register-1. Read status operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RDSR (BIT(27))
|
|
#define SPI_MEM_FLASH_RDSR_M (BIT(27))
|
|
#define SPI_MEM_FLASH_RDSR_V 0x1
|
|
#define SPI_MEM_FLASH_RDSR_S 27
|
|
/* SPI_MEM_FLASH_WRSR : R/W/SC ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: Write status register enable. Write status operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_WRSR (BIT(26))
|
|
#define SPI_MEM_FLASH_WRSR_M (BIT(26))
|
|
#define SPI_MEM_FLASH_WRSR_V 0x1
|
|
#define SPI_MEM_FLASH_WRSR_S 26
|
|
/* SPI_MEM_FLASH_PP : R/W/SC ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: Page program enable(1 byte ~256 bytes data to be programmed).
|
|
Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PP (BIT(25))
|
|
#define SPI_MEM_FLASH_PP_M (BIT(25))
|
|
#define SPI_MEM_FLASH_PP_V 0x1
|
|
#define SPI_MEM_FLASH_PP_S 25
|
|
/* SPI_MEM_FLASH_SE : R/W/SC ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: Sector erase enable(4KB). Sector erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_SE (BIT(24))
|
|
#define SPI_MEM_FLASH_SE_M (BIT(24))
|
|
#define SPI_MEM_FLASH_SE_V 0x1
|
|
#define SPI_MEM_FLASH_SE_S 24
|
|
/* SPI_MEM_FLASH_BE : R/W/SC ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: Block erase enable(32KB) . Block erase operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_BE (BIT(23))
|
|
#define SPI_MEM_FLASH_BE_M (BIT(23))
|
|
#define SPI_MEM_FLASH_BE_V 0x1
|
|
#define SPI_MEM_FLASH_BE_S 23
|
|
/* SPI_MEM_FLASH_CE : R/W/SC ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: Chip erase enable. Chip erase operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_CE (BIT(22))
|
|
#define SPI_MEM_FLASH_CE_M (BIT(22))
|
|
#define SPI_MEM_FLASH_CE_V 0x1
|
|
#define SPI_MEM_FLASH_CE_S 22
|
|
/* SPI_MEM_FLASH_DP : R/W/SC ;bitpos:[21] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into power down. An operation will be triggered
|
|
when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_DP (BIT(21))
|
|
#define SPI_MEM_FLASH_DP_M (BIT(21))
|
|
#define SPI_MEM_FLASH_DP_V 0x1
|
|
#define SPI_MEM_FLASH_DP_S 21
|
|
/* SPI_MEM_FLASH_RES : R/W/SC ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: This bit combined with reg_resandres bit releases Flash from
|
|
the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_RES (BIT(20))
|
|
#define SPI_MEM_FLASH_RES_M (BIT(20))
|
|
#define SPI_MEM_FLASH_RES_V 0x1
|
|
#define SPI_MEM_FLASH_RES_S 20
|
|
/* SPI_MEM_FLASH_HPM : R/W/SC ;bitpos:[19] ;default: 1'b0 ; */
|
|
/*description: Drive Flash into high performance mode. The bit will be cleared
|
|
once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_HPM (BIT(19))
|
|
#define SPI_MEM_FLASH_HPM_M (BIT(19))
|
|
#define SPI_MEM_FLASH_HPM_V 0x1
|
|
#define SPI_MEM_FLASH_HPM_S 19
|
|
/* SPI_MEM_USR : R/W/SC ;bitpos:[18] ;default: 1'b0 ; */
|
|
/*description: User define command enable. An operation will be triggered when
|
|
the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_USR (BIT(18))
|
|
#define SPI_MEM_USR_M (BIT(18))
|
|
#define SPI_MEM_USR_V 0x1
|
|
#define SPI_MEM_USR_S 18
|
|
/* SPI_MEM_FLASH_PE : R/W/SC ;bitpos:[17] ;default: 1'b0 ; */
|
|
/*description: In user mode it is set to indicate that program/erase operation
|
|
will be triggered. The bit is combined with spi_mem_usr bit. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PE (BIT(17))
|
|
#define SPI_MEM_FLASH_PE_M (BIT(17))
|
|
#define SPI_MEM_FLASH_PE_V 0x1
|
|
#define SPI_MEM_FLASH_PE_S 17
|
|
/* SPI_MEM_SLV_ST : RO ;bitpos:[7:4] ;default: 4'b0 ; */
|
|
/*description: The current status of SPI1 slave FSM: mspi_st. 0: idle state
|
|
1: preparation state 2: send command state 3: send address state 4: wait state 5: read data state 6:write data state 7: done state 8: read data end state.*/
|
|
#define SPI_MEM_SLV_ST 0x0000000F
|
|
#define SPI_MEM_SLV_ST_M ((SPI_MEM_SLV_ST_V)<<(SPI_MEM_SLV_ST_S))
|
|
#define SPI_MEM_SLV_ST_V 0xF
|
|
#define SPI_MEM_SLV_ST_S 4
|
|
/* SPI_MEM_MST_ST : RO ;bitpos:[3:0] ;default: 4'b0 ; */
|
|
/*description: The current status of SPI1 master FSM.*/
|
|
#define SPI_MEM_MST_ST 0x0000000F
|
|
#define SPI_MEM_MST_ST_M ((SPI_MEM_MST_ST_V)<<(SPI_MEM_MST_ST_S))
|
|
#define SPI_MEM_MST_ST_V 0xF
|
|
#define SPI_MEM_MST_ST_S 0
|
|
|
|
#define SPI_MEM_ADDR_REG(i) (REG_SPI_MEM_BASE(i) + 0x004)
|
|
/* SPI_MEM_USR_ADDR_VALUE : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
|
|
/*description: In user mode it is the memory address. other then the bit0-bit23
|
|
is the memory address the bit24-bit31 are the byte length of a transfer.*/
|
|
#define SPI_MEM_USR_ADDR_VALUE 0xFFFFFFFF
|
|
#define SPI_MEM_USR_ADDR_VALUE_M ((SPI_MEM_USR_ADDR_VALUE_V)<<(SPI_MEM_USR_ADDR_VALUE_S))
|
|
#define SPI_MEM_USR_ADDR_VALUE_V 0xFFFFFFFF
|
|
#define SPI_MEM_USR_ADDR_VALUE_S 0
|
|
|
|
#define SPI_MEM_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x008)
|
|
/* SPI_MEM_FREAD_QIO : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
4 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_QIO (BIT(24))
|
|
#define SPI_MEM_FREAD_QIO_M (BIT(24))
|
|
#define SPI_MEM_FREAD_QIO_V 0x1
|
|
#define SPI_MEM_FREAD_QIO_S 24
|
|
/* SPI_MEM_FREAD_DIO : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: In the read operations address phase and read-data phase apply
|
|
2 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_DIO (BIT(23))
|
|
#define SPI_MEM_FREAD_DIO_M (BIT(23))
|
|
#define SPI_MEM_FREAD_DIO_V 0x1
|
|
#define SPI_MEM_FREAD_DIO_S 23
|
|
/* SPI_MEM_WRSR_2B : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: two bytes data will be written to status register when it is
|
|
set. 1: enable 0: disable.*/
|
|
#define SPI_MEM_WRSR_2B (BIT(22))
|
|
#define SPI_MEM_WRSR_2B_M (BIT(22))
|
|
#define SPI_MEM_WRSR_2B_V 0x1
|
|
#define SPI_MEM_WRSR_2B_S 22
|
|
/* SPI_MEM_WP_REG : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
/*description: Write protect signal output when SPI is idle. 1: output high 0: output low.*/
|
|
#define SPI_MEM_WP_REG (BIT(21))
|
|
#define SPI_MEM_WP_REG_M (BIT(21))
|
|
#define SPI_MEM_WP_REG_V 0x1
|
|
#define SPI_MEM_WP_REG_S 21
|
|
/* SPI_MEM_FREAD_QUAD : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 4 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_QUAD (BIT(20))
|
|
#define SPI_MEM_FREAD_QUAD_M (BIT(20))
|
|
#define SPI_MEM_FREAD_QUAD_V 0x1
|
|
#define SPI_MEM_FREAD_QUAD_S 20
|
|
/* SPI_MEM_D_POL : R/W ;bitpos:[19] ;default: 1'b1 ; */
|
|
/*description: The bit is used to set MOSI line polarity 1: high 0 low*/
|
|
#define SPI_MEM_D_POL (BIT(19))
|
|
#define SPI_MEM_D_POL_M (BIT(19))
|
|
#define SPI_MEM_D_POL_V 0x1
|
|
#define SPI_MEM_D_POL_S 19
|
|
/* SPI_MEM_Q_POL : R/W ;bitpos:[18] ;default: 1'b1 ; */
|
|
/*description: The bit is used to set MISO line polarity 1: high 0 low*/
|
|
#define SPI_MEM_Q_POL (BIT(18))
|
|
#define SPI_MEM_Q_POL_M (BIT(18))
|
|
#define SPI_MEM_Q_POL_V 0x1
|
|
#define SPI_MEM_Q_POL_S 18
|
|
/* SPI_MEM_RESANDRES : R/W ;bitpos:[15] ;default: 1'b1 ; */
|
|
/*description: The Device ID is read out to SPI_MEM_RD_STATUS register this
|
|
bit combine with spi_mem_flash_res bit. 1: enable 0: disable.*/
|
|
#define SPI_MEM_RESANDRES (BIT(15))
|
|
#define SPI_MEM_RESANDRES_M (BIT(15))
|
|
#define SPI_MEM_RESANDRES_V 0x1
|
|
#define SPI_MEM_RESANDRES_S 15
|
|
/* SPI_MEM_FREAD_DUAL : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the read operations read-data phase apply 2 signals. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FREAD_DUAL (BIT(14))
|
|
#define SPI_MEM_FREAD_DUAL_M (BIT(14))
|
|
#define SPI_MEM_FREAD_DUAL_V 0x1
|
|
#define SPI_MEM_FREAD_DUAL_S 14
|
|
/* SPI_MEM_FASTRD_MODE : R/W ;bitpos:[13] ;default: 1'b1 ; */
|
|
/*description: This bit enable the bits: spi_mem_fread_qio spi_mem_fread_dio
|
|
spi_mem_fread_qout and spi_mem_fread_dout. 1: enable 0: disable.*/
|
|
#define SPI_MEM_FASTRD_MODE (BIT(13))
|
|
#define SPI_MEM_FASTRD_MODE_M (BIT(13))
|
|
#define SPI_MEM_FASTRD_MODE_V 0x1
|
|
#define SPI_MEM_FASTRD_MODE_S 13
|
|
/* SPI_MEM_TX_CRC_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
/*description: For SPI1 enable crc32 when writing encrypted data to flash.
|
|
1: enable 0:disable*/
|
|
#define SPI_MEM_TX_CRC_EN (BIT(11))
|
|
#define SPI_MEM_TX_CRC_EN_M (BIT(11))
|
|
#define SPI_MEM_TX_CRC_EN_V 0x1
|
|
#define SPI_MEM_TX_CRC_EN_S 11
|
|
/* SPI_MEM_FCS_CRC_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: For SPI1 initialize crc32 module before writing encrypted data
|
|
to flash. Active low.*/
|
|
#define SPI_MEM_FCS_CRC_EN (BIT(10))
|
|
#define SPI_MEM_FCS_CRC_EN_M (BIT(10))
|
|
#define SPI_MEM_FCS_CRC_EN_V 0x1
|
|
#define SPI_MEM_FCS_CRC_EN_S 10
|
|
/* SPI_MEM_FCMD_QUAD : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: Apply 4 signals during command phase 1:enable 0: disable*/
|
|
#define SPI_MEM_FCMD_QUAD (BIT(8))
|
|
#define SPI_MEM_FCMD_QUAD_M (BIT(8))
|
|
#define SPI_MEM_FCMD_QUAD_V 0x1
|
|
#define SPI_MEM_FCMD_QUAD_S 8
|
|
/* SPI_MEM_FCMD_DUAL : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: Apply 2 signals during command phase 1:enable 0: disable*/
|
|
#define SPI_MEM_FCMD_DUAL (BIT(7))
|
|
#define SPI_MEM_FCMD_DUAL_M (BIT(7))
|
|
#define SPI_MEM_FCMD_DUAL_V 0x1
|
|
#define SPI_MEM_FCMD_DUAL_S 7
|
|
/* SPI_MEM_FDUMMY_OUT : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: In the dummy phase the signal level of spi is output by the spi controller.*/
|
|
#define SPI_MEM_FDUMMY_OUT (BIT(3))
|
|
#define SPI_MEM_FDUMMY_OUT_M (BIT(3))
|
|
#define SPI_MEM_FDUMMY_OUT_V 0x1
|
|
#define SPI_MEM_FDUMMY_OUT_S 3
|
|
|
|
#define SPI_MEM_CTRL1_REG(i) (REG_SPI_MEM_BASE(i) + 0x00C)
|
|
/* SPI_MEM_RXFIFO_WFULL_ERR : RO ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: 1: SPI0 RX FIFO write full error Cache/EDMA do not read all
|
|
the data out. 0: Not error.*/
|
|
#define SPI_MEM_RXFIFO_WFULL_ERR (BIT(31))
|
|
#define SPI_MEM_RXFIFO_WFULL_ERR_M (BIT(31))
|
|
#define SPI_MEM_RXFIFO_WFULL_ERR_V 0x1
|
|
#define SPI_MEM_RXFIFO_WFULL_ERR_S 31
|
|
/* SPI_MEM_RXFIFO_RST : WT ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: SPI0 RX FIFO reset signal.*/
|
|
#define SPI_MEM_RXFIFO_RST (BIT(30))
|
|
#define SPI_MEM_RXFIFO_RST_M (BIT(30))
|
|
#define SPI_MEM_RXFIFO_RST_V 0x1
|
|
#define SPI_MEM_RXFIFO_RST_S 30
|
|
/* SPI_MEM_CS_HOLD_DLY_RES : R/W ;bitpos:[11:2] ;default: 10'h3ff ; */
|
|
/*description: After RES/DP/HPM command is sent SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0]
|
|
* 512) SPI_CLK cycles.*/
|
|
#define SPI_MEM_CS_HOLD_DLY_RES 0x000003FF
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_M ((SPI_MEM_CS_HOLD_DLY_RES_V)<<(SPI_MEM_CS_HOLD_DLY_RES_S))
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_V 0x3FF
|
|
#define SPI_MEM_CS_HOLD_DLY_RES_S 2
|
|
/* SPI_MEM_CLK_MODE : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: SPI clock mode bits. 0: SPI clock is off when CS inactive 1:
|
|
SPI clock is delayed one cycle after CS inactive 2: SPI clock is delayed two cycles after CS inactive 3: SPI clock is alwasy on.*/
|
|
#define SPI_MEM_CLK_MODE 0x00000003
|
|
#define SPI_MEM_CLK_MODE_M ((SPI_MEM_CLK_MODE_V)<<(SPI_MEM_CLK_MODE_S))
|
|
#define SPI_MEM_CLK_MODE_V 0x3
|
|
#define SPI_MEM_CLK_MODE_S 0
|
|
|
|
#define SPI_MEM_CTRL2_REG(i) (REG_SPI_MEM_BASE(i) + 0x010)
|
|
/* SPI_MEM_SYNC_RESET : WT ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: The FSM will be reset.*/
|
|
#define SPI_MEM_SYNC_RESET (BIT(31))
|
|
#define SPI_MEM_SYNC_RESET_M (BIT(31))
|
|
#define SPI_MEM_SYNC_RESET_V 0x1
|
|
#define SPI_MEM_SYNC_RESET_S 31
|
|
/* SPI_MEM_CS_HOLD_DELAY : R/W ;bitpos:[30:25] ;default: 6'd0 ; */
|
|
/*description: These bits are used to set the minimum CS high time tSHSL between
|
|
SPI burst transfer when accesses to flash. tSHSL is (SPI_MEM_CS_HOLD_DELAY[5:0] + 1) MSPI core clock cycles.*/
|
|
#define SPI_MEM_CS_HOLD_DELAY 0x0000003F
|
|
#define SPI_MEM_CS_HOLD_DELAY_M ((SPI_MEM_CS_HOLD_DELAY_V)<<(SPI_MEM_CS_HOLD_DELAY_S))
|
|
#define SPI_MEM_CS_HOLD_DELAY_V 0x3F
|
|
#define SPI_MEM_CS_HOLD_DELAY_S 25
|
|
/* SPI_MEM_CS_HOLD_TIME : R/W ;bitpos:[9:5] ;default: 5'h1 ; */
|
|
/*description: Spi cs signal is delayed to inactive by spi clock this bits are
|
|
combined with spi_mem_cs_hold bit.*/
|
|
#define SPI_MEM_CS_HOLD_TIME 0x0000001F
|
|
#define SPI_MEM_CS_HOLD_TIME_M ((SPI_MEM_CS_HOLD_TIME_V)<<(SPI_MEM_CS_HOLD_TIME_S))
|
|
#define SPI_MEM_CS_HOLD_TIME_V 0x1F
|
|
#define SPI_MEM_CS_HOLD_TIME_S 5
|
|
/* SPI_MEM_CS_SETUP_TIME : R/W ;bitpos:[4:0] ;default: 5'h1 ; */
|
|
/*description: (cycles-1) of prepare phase by spi clock this bits are combined
|
|
with spi_mem_cs_setup bit.*/
|
|
#define SPI_MEM_CS_SETUP_TIME 0x0000001F
|
|
#define SPI_MEM_CS_SETUP_TIME_M ((SPI_MEM_CS_SETUP_TIME_V)<<(SPI_MEM_CS_SETUP_TIME_S))
|
|
#define SPI_MEM_CS_SETUP_TIME_V 0x1F
|
|
#define SPI_MEM_CS_SETUP_TIME_S 0
|
|
|
|
#define SPI_MEM_CLOCK_REG(i) (REG_SPI_MEM_BASE(i) + 0x014)
|
|
/* SPI_MEM_CLK_EQU_SYSCLK : R/W ;bitpos:[31] ;default: 1'b0 ; */
|
|
/*description: Set this bit in 1-division mode.reserved for spi1*/
|
|
#define SPI_MEM_CLK_EQU_SYSCLK (BIT(31))
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_M (BIT(31))
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_V 0x1
|
|
#define SPI_MEM_CLK_EQU_SYSCLK_S 31
|
|
/* SPI_MEM_CLKCNT_N : R/W ;bitpos:[23:16] ;default: 8'h3 ; */
|
|
/*description: In the master mode it is the divider of spi_mem_clk. So spi_mem_clk
|
|
frequency is system/(spi_mem_clkcnt_N+1)*/
|
|
#define SPI_MEM_CLKCNT_N 0x000000FF
|
|
#define SPI_MEM_CLKCNT_N_M ((SPI_MEM_CLKCNT_N_V)<<(SPI_MEM_CLKCNT_N_S))
|
|
#define SPI_MEM_CLKCNT_N_V 0xFF
|
|
#define SPI_MEM_CLKCNT_N_S 16
|
|
/* SPI_MEM_CLKCNT_H : R/W ;bitpos:[15:8] ;default: 8'h1 ; */
|
|
/*description: In the master mode it must be floor((spi_mem_clkcnt_N+1)/2-1).*/
|
|
#define SPI_MEM_CLKCNT_H 0x000000FF
|
|
#define SPI_MEM_CLKCNT_H_M ((SPI_MEM_CLKCNT_H_V)<<(SPI_MEM_CLKCNT_H_S))
|
|
#define SPI_MEM_CLKCNT_H_V 0xFF
|
|
#define SPI_MEM_CLKCNT_H_S 8
|
|
/* SPI_MEM_CLKCNT_L : R/W ;bitpos:[7:0] ;default: 8'h3 ; */
|
|
/*description: In the master mode it must be equal to spi_mem_clkcnt_N.*/
|
|
#define SPI_MEM_CLKCNT_L 0x000000FF
|
|
#define SPI_MEM_CLKCNT_L_M ((SPI_MEM_CLKCNT_L_V)<<(SPI_MEM_CLKCNT_L_S))
|
|
#define SPI_MEM_CLKCNT_L_V 0xFF
|
|
#define SPI_MEM_CLKCNT_L_S 0
|
|
|
|
#define SPI_MEM_USER_REG(i) (REG_SPI_MEM_BASE(i) + 0x018)
|
|
/* SPI_MEM_USR_COMMAND : R/W ;bitpos:[31] ;default: 1'b1 ; */
|
|
/*description: This bit enable the command phase of an operation.*/
|
|
#define SPI_MEM_USR_COMMAND (BIT(31))
|
|
#define SPI_MEM_USR_COMMAND_M (BIT(31))
|
|
#define SPI_MEM_USR_COMMAND_V 0x1
|
|
#define SPI_MEM_USR_COMMAND_S 31
|
|
/* SPI_MEM_USR_ADDR : R/W ;bitpos:[30] ;default: 1'b0 ; */
|
|
/*description: This bit enable the address phase of an operation.*/
|
|
#define SPI_MEM_USR_ADDR (BIT(30))
|
|
#define SPI_MEM_USR_ADDR_M (BIT(30))
|
|
#define SPI_MEM_USR_ADDR_V 0x1
|
|
#define SPI_MEM_USR_ADDR_S 30
|
|
/* SPI_MEM_USR_DUMMY : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
/*description: This bit enable the dummy phase of an operation.*/
|
|
#define SPI_MEM_USR_DUMMY (BIT(29))
|
|
#define SPI_MEM_USR_DUMMY_M (BIT(29))
|
|
#define SPI_MEM_USR_DUMMY_V 0x1
|
|
#define SPI_MEM_USR_DUMMY_S 29
|
|
/* SPI_MEM_USR_MISO : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
/*description: This bit enable the read-data phase of an operation.*/
|
|
#define SPI_MEM_USR_MISO (BIT(28))
|
|
#define SPI_MEM_USR_MISO_M (BIT(28))
|
|
#define SPI_MEM_USR_MISO_V 0x1
|
|
#define SPI_MEM_USR_MISO_S 28
|
|
/* SPI_MEM_USR_MOSI : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
/*description: This bit enable the write-data phase of an operation.*/
|
|
#define SPI_MEM_USR_MOSI (BIT(27))
|
|
#define SPI_MEM_USR_MOSI_M (BIT(27))
|
|
#define SPI_MEM_USR_MOSI_V 0x1
|
|
#define SPI_MEM_USR_MOSI_S 27
|
|
/* SPI_MEM_USR_DUMMY_IDLE : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
/*description: spi clock is disable in dummy phase when the bit is enable.*/
|
|
#define SPI_MEM_USR_DUMMY_IDLE (BIT(26))
|
|
#define SPI_MEM_USR_DUMMY_IDLE_M (BIT(26))
|
|
#define SPI_MEM_USR_DUMMY_IDLE_V 0x1
|
|
#define SPI_MEM_USR_DUMMY_IDLE_S 26
|
|
/* SPI_MEM_USR_MOSI_HIGHPART : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
/*description: write-data phase only access to high-part of the buffer spi_mem_w8~spi_mem_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_MEM_USR_MOSI_HIGHPART (BIT(25))
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_M (BIT(25))
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_V 0x1
|
|
#define SPI_MEM_USR_MOSI_HIGHPART_S 25
|
|
/* SPI_MEM_USR_MISO_HIGHPART : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: read-data phase only access to high-part of the buffer spi_mem_w8~spi_mem_w15.
|
|
1: enable 0: disable.*/
|
|
#define SPI_MEM_USR_MISO_HIGHPART (BIT(24))
|
|
#define SPI_MEM_USR_MISO_HIGHPART_M (BIT(24))
|
|
#define SPI_MEM_USR_MISO_HIGHPART_V 0x1
|
|
#define SPI_MEM_USR_MISO_HIGHPART_S 24
|
|
/* SPI_MEM_FWRITE_QIO : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 4 signals.*/
|
|
#define SPI_MEM_FWRITE_QIO (BIT(15))
|
|
#define SPI_MEM_FWRITE_QIO_M (BIT(15))
|
|
#define SPI_MEM_FWRITE_QIO_V 0x1
|
|
#define SPI_MEM_FWRITE_QIO_S 15
|
|
/* SPI_MEM_FWRITE_DIO : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
/*description: In the write operations address phase and read-data phase apply 2 signals.*/
|
|
#define SPI_MEM_FWRITE_DIO (BIT(14))
|
|
#define SPI_MEM_FWRITE_DIO_M (BIT(14))
|
|
#define SPI_MEM_FWRITE_DIO_V 0x1
|
|
#define SPI_MEM_FWRITE_DIO_S 14
|
|
/* SPI_MEM_FWRITE_QUAD : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 4 signals*/
|
|
#define SPI_MEM_FWRITE_QUAD (BIT(13))
|
|
#define SPI_MEM_FWRITE_QUAD_M (BIT(13))
|
|
#define SPI_MEM_FWRITE_QUAD_V 0x1
|
|
#define SPI_MEM_FWRITE_QUAD_S 13
|
|
/* SPI_MEM_FWRITE_DUAL : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
/*description: In the write operations read-data phase apply 2 signals*/
|
|
#define SPI_MEM_FWRITE_DUAL (BIT(12))
|
|
#define SPI_MEM_FWRITE_DUAL_M (BIT(12))
|
|
#define SPI_MEM_FWRITE_DUAL_V 0x1
|
|
#define SPI_MEM_FWRITE_DUAL_S 12
|
|
/* SPI_MEM_CK_OUT_EDGE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: the bit combined with spi_mem_mosi_delay_mode bits to set mosi
|
|
signal delay mode.*/
|
|
#define SPI_MEM_CK_OUT_EDGE (BIT(9))
|
|
#define SPI_MEM_CK_OUT_EDGE_M (BIT(9))
|
|
#define SPI_MEM_CK_OUT_EDGE_V 0x1
|
|
#define SPI_MEM_CK_OUT_EDGE_S 9
|
|
/* SPI_MEM_CS_SETUP : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: spi cs is enable when spi is in prepare phase. 1: enable 0: disable.*/
|
|
#define SPI_MEM_CS_SETUP (BIT(7))
|
|
#define SPI_MEM_CS_SETUP_M (BIT(7))
|
|
#define SPI_MEM_CS_SETUP_V 0x1
|
|
#define SPI_MEM_CS_SETUP_S 7
|
|
/* SPI_MEM_CS_HOLD : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: spi cs keep low when spi is in done phase. 1: enable 0: disable.*/
|
|
#define SPI_MEM_CS_HOLD (BIT(6))
|
|
#define SPI_MEM_CS_HOLD_M (BIT(6))
|
|
#define SPI_MEM_CS_HOLD_V 0x1
|
|
#define SPI_MEM_CS_HOLD_S 6
|
|
|
|
#define SPI_MEM_USER1_REG(i) (REG_SPI_MEM_BASE(i) + 0x01C)
|
|
/* SPI_MEM_USR_ADDR_BITLEN : R/W ;bitpos:[31:26] ;default: 6'd23 ; */
|
|
/*description: The length in bits of address phase. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_ADDR_BITLEN 0x0000003F
|
|
#define SPI_MEM_USR_ADDR_BITLEN_M ((SPI_MEM_USR_ADDR_BITLEN_V)<<(SPI_MEM_USR_ADDR_BITLEN_S))
|
|
#define SPI_MEM_USR_ADDR_BITLEN_V 0x3F
|
|
#define SPI_MEM_USR_ADDR_BITLEN_S 26
|
|
/* SPI_MEM_USR_DUMMY_CYCLELEN : R/W ;bitpos:[5:0] ;default: 6'd7 ; */
|
|
/*description: The length in spi_mem_clk cycles of dummy phase. The register
|
|
value shall be (cycle_num-1).*/
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN 0x0000003F
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_M ((SPI_MEM_USR_DUMMY_CYCLELEN_V)<<(SPI_MEM_USR_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_V 0x3F
|
|
#define SPI_MEM_USR_DUMMY_CYCLELEN_S 0
|
|
|
|
#define SPI_MEM_USER2_REG(i) (REG_SPI_MEM_BASE(i) + 0x020)
|
|
/* SPI_MEM_USR_COMMAND_BITLEN : R/W ;bitpos:[31:28] ;default: 4'd7 ; */
|
|
/*description: The length in bits of command phase. The register value shall be (bit_num-1)*/
|
|
#define SPI_MEM_USR_COMMAND_BITLEN 0x0000000F
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_M ((SPI_MEM_USR_COMMAND_BITLEN_V)<<(SPI_MEM_USR_COMMAND_BITLEN_S))
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_V 0xF
|
|
#define SPI_MEM_USR_COMMAND_BITLEN_S 28
|
|
/* SPI_MEM_USR_COMMAND_VALUE : R/W ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: The value of command.*/
|
|
#define SPI_MEM_USR_COMMAND_VALUE 0x0000FFFF
|
|
#define SPI_MEM_USR_COMMAND_VALUE_M ((SPI_MEM_USR_COMMAND_VALUE_V)<<(SPI_MEM_USR_COMMAND_VALUE_S))
|
|
#define SPI_MEM_USR_COMMAND_VALUE_V 0xFFFF
|
|
#define SPI_MEM_USR_COMMAND_VALUE_S 0
|
|
|
|
#define SPI_MEM_MOSI_DLEN_REG(i) (REG_SPI_MEM_BASE(i) + 0x024)
|
|
/* SPI_MEM_USR_MOSI_DBITLEN : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
|
|
/*description: The length in bits of write-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_MOSI_DBITLEN 0x000003FF
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_M ((SPI_MEM_USR_MOSI_DBITLEN_V)<<(SPI_MEM_USR_MOSI_DBITLEN_S))
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_V 0x3FF
|
|
#define SPI_MEM_USR_MOSI_DBITLEN_S 0
|
|
|
|
#define SPI_MEM_MISO_DLEN_REG(i) (REG_SPI_MEM_BASE(i) + 0x028)
|
|
/* SPI_MEM_USR_MISO_DBITLEN : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
|
|
/*description: The length in bits of read-data. The register value shall be (bit_num-1).*/
|
|
#define SPI_MEM_USR_MISO_DBITLEN 0x000003FF
|
|
#define SPI_MEM_USR_MISO_DBITLEN_M ((SPI_MEM_USR_MISO_DBITLEN_V)<<(SPI_MEM_USR_MISO_DBITLEN_S))
|
|
#define SPI_MEM_USR_MISO_DBITLEN_V 0x3FF
|
|
#define SPI_MEM_USR_MISO_DBITLEN_S 0
|
|
|
|
#define SPI_MEM_RD_STATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x02C)
|
|
/* SPI_MEM_WB_MODE : R/W ;bitpos:[23:16] ;default: 8'h00 ; */
|
|
/*description: Mode bits in the flash fast read mode it is combined with spi_mem_fastrd_mode
|
|
bit.*/
|
|
#define SPI_MEM_WB_MODE 0x000000FF
|
|
#define SPI_MEM_WB_MODE_M ((SPI_MEM_WB_MODE_V)<<(SPI_MEM_WB_MODE_S))
|
|
#define SPI_MEM_WB_MODE_V 0xFF
|
|
#define SPI_MEM_WB_MODE_S 16
|
|
/* SPI_MEM_STATUS : R/W/SS ;bitpos:[15:0] ;default: 16'b0 ; */
|
|
/*description: The value is stored when set spi_mem_flash_rdsr bit and spi_mem_flash_res bit.*/
|
|
#define SPI_MEM_STATUS 0x0000FFFF
|
|
#define SPI_MEM_STATUS_M ((SPI_MEM_STATUS_V)<<(SPI_MEM_STATUS_S))
|
|
#define SPI_MEM_STATUS_V 0xFFFF
|
|
#define SPI_MEM_STATUS_S 0
|
|
|
|
#define SPI_MEM_MISC_REG(i) (REG_SPI_MEM_BASE(i) + 0x034)
|
|
/* SPI_MEM_CS_KEEP_ACTIVE : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
/*description: spi cs line keep low when the bit is set.*/
|
|
#define SPI_MEM_CS_KEEP_ACTIVE (BIT(10))
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_M (BIT(10))
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_V 0x1
|
|
#define SPI_MEM_CS_KEEP_ACTIVE_S 10
|
|
/* SPI_MEM_CK_IDLE_EDGE : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
/*description: 1: spi clk line is high when idle 0: spi clk line is low when idle*/
|
|
#define SPI_MEM_CK_IDLE_EDGE (BIT(9))
|
|
#define SPI_MEM_CK_IDLE_EDGE_M (BIT(9))
|
|
#define SPI_MEM_CK_IDLE_EDGE_V 0x1
|
|
#define SPI_MEM_CK_IDLE_EDGE_S 9
|
|
/* SPI_MEM_SLV_ST_TRANS_END_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable the interrupt of spi0_slv_st controlled
|
|
transmitting is done.*/
|
|
#define SPI_MEM_SLV_ST_TRANS_END_INT_ENA (BIT(6))
|
|
#define SPI_MEM_SLV_ST_TRANS_END_INT_ENA_M (BIT(6))
|
|
#define SPI_MEM_SLV_ST_TRANS_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_SLV_ST_TRANS_END_INT_ENA_S 6
|
|
/* SPI_MEM_SLV_ST_TRANS_END : R/W/SS ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: The bit is used to indicate the spi0_slv_st controlled transmitting is done.*/
|
|
#define SPI_MEM_SLV_ST_TRANS_END (BIT(5))
|
|
#define SPI_MEM_SLV_ST_TRANS_END_M (BIT(5))
|
|
#define SPI_MEM_SLV_ST_TRANS_END_V 0x1
|
|
#define SPI_MEM_SLV_ST_TRANS_END_S 5
|
|
/* SPI_MEM_CSPI_ST_TRANS_END_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable the interrupt of SPI0 cspi_st controlled
|
|
transmitting is done.*/
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_INT_ENA (BIT(4))
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_INT_ENA_M (BIT(4))
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_INT_ENA_S 4
|
|
/* SPI_MEM_CSPI_ST_TRANS_END : R/W/SS ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The bit is used to indicate the SPI0 cspi_st controlled transmitting is done.*/
|
|
#define SPI_MEM_CSPI_ST_TRANS_END (BIT(3))
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_M (BIT(3))
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_V 0x1
|
|
#define SPI_MEM_CSPI_ST_TRANS_END_S 3
|
|
/* SPI_MEM_TRANS_END_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable the interrupt of SPI0 em_st controlled
|
|
transmitting is done.*/
|
|
#define SPI_MEM_TRANS_END_INT_ENA (BIT(2))
|
|
#define SPI_MEM_TRANS_END_INT_ENA_M (BIT(2))
|
|
#define SPI_MEM_TRANS_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_TRANS_END_INT_ENA_S 2
|
|
/* SPI_MEM_CS1_DIS : R/W ;bitpos:[1] ;default: 1'b1 ; */
|
|
/*description: SPI_CS1 pin enable 1: disable SPI_CS1 0: SPI_CS1 pin is active
|
|
to select SPI device such as flash external RAM and so on.*/
|
|
#define SPI_MEM_CS1_DIS (BIT(1))
|
|
#define SPI_MEM_CS1_DIS_M (BIT(1))
|
|
#define SPI_MEM_CS1_DIS_V 0x1
|
|
#define SPI_MEM_CS1_DIS_S 1
|
|
/* SPI_MEM_CS0_DIS : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: SPI_CS0 pin enable 1: disable SPI_CS0 0: SPI_CS0 pin is active
|
|
to select SPI device such as flash external RAM and so on.*/
|
|
#define SPI_MEM_CS0_DIS (BIT(0))
|
|
#define SPI_MEM_CS0_DIS_M (BIT(0))
|
|
#define SPI_MEM_CS0_DIS_V 0x1
|
|
#define SPI_MEM_CS0_DIS_S 0
|
|
|
|
#define SPI_MEM_TX_CRC_REG(i) (REG_SPI_MEM_BASE(i) + 0x038)
|
|
/* SPI_MEM_TX_CRC_DATA : RO ;bitpos:[31:0] ;default: 32'hffffffff ; */
|
|
/*description: For SPI1 the value of crc32.*/
|
|
#define SPI_MEM_TX_CRC_DATA 0xFFFFFFFF
|
|
#define SPI_MEM_TX_CRC_DATA_M ((SPI_MEM_TX_CRC_DATA_V)<<(SPI_MEM_TX_CRC_DATA_S))
|
|
#define SPI_MEM_TX_CRC_DATA_V 0xFFFFFFFF
|
|
#define SPI_MEM_TX_CRC_DATA_S 0
|
|
|
|
#define SPI_MEM_CACHE_FCTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x03C)
|
|
/* SPI_MEM_FADDR_QUAD : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
/*description: For SPI1 address phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FADDR_QUAD (BIT(8))
|
|
#define SPI_MEM_FADDR_QUAD_M (BIT(8))
|
|
#define SPI_MEM_FADDR_QUAD_V 0x1
|
|
#define SPI_MEM_FADDR_QUAD_S 8
|
|
/* SPI_MEM_FDOUT_QUAD : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: For SPI1 dout phase apply 4 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FDOUT_QUAD (BIT(7))
|
|
#define SPI_MEM_FDOUT_QUAD_M (BIT(7))
|
|
#define SPI_MEM_FDOUT_QUAD_V 0x1
|
|
#define SPI_MEM_FDOUT_QUAD_S 7
|
|
/* SPI_MEM_FDIN_QUAD : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: For SPI1 din phase apply 4 signals. 1: enable 0: disable. The
|
|
bit is the same with spi_mem_fread_qio.*/
|
|
#define SPI_MEM_FDIN_QUAD (BIT(6))
|
|
#define SPI_MEM_FDIN_QUAD_M (BIT(6))
|
|
#define SPI_MEM_FDIN_QUAD_V 0x1
|
|
#define SPI_MEM_FDIN_QUAD_S 6
|
|
/* SPI_MEM_FADDR_DUAL : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: For SPI1 address phase apply 2 signals. 1: enable 0: disable.
|
|
The bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FADDR_DUAL (BIT(5))
|
|
#define SPI_MEM_FADDR_DUAL_M (BIT(5))
|
|
#define SPI_MEM_FADDR_DUAL_V 0x1
|
|
#define SPI_MEM_FADDR_DUAL_S 5
|
|
/* SPI_MEM_FDOUT_DUAL : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: For SPI1 dout phase apply 2 signals. 1: enable 0: disable. The
|
|
bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FDOUT_DUAL (BIT(4))
|
|
#define SPI_MEM_FDOUT_DUAL_M (BIT(4))
|
|
#define SPI_MEM_FDOUT_DUAL_V 0x1
|
|
#define SPI_MEM_FDOUT_DUAL_S 4
|
|
/* SPI_MEM_FDIN_DUAL : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: For SPI1 din phase apply 2 signals. 1: enable 0: disable. The
|
|
bit is the same with spi_mem_fread_dio.*/
|
|
#define SPI_MEM_FDIN_DUAL (BIT(3))
|
|
#define SPI_MEM_FDIN_DUAL_M (BIT(3))
|
|
#define SPI_MEM_FDIN_DUAL_V 0x1
|
|
#define SPI_MEM_FDIN_DUAL_S 3
|
|
/* SPI_MEM_CACHE_FLASH_USR_CMD : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash for user define command 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD (BIT(2))
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_M (BIT(2))
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_V 0x1
|
|
#define SPI_MEM_CACHE_FLASH_USR_CMD_S 2
|
|
/* SPI_MEM_CACHE_USR_ADDR_4BYTE : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: For SPI0 cache read flash with 4 bytes address 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_USR_ADDR_4BYTE (BIT(1))
|
|
#define SPI_MEM_CACHE_USR_ADDR_4BYTE_M (BIT(1))
|
|
#define SPI_MEM_CACHE_USR_ADDR_4BYTE_V 0x1
|
|
#define SPI_MEM_CACHE_USR_ADDR_4BYTE_S 1
|
|
/* SPI_MEM_CACHE_REQ_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: For SPI0 Cache access enable 1: enable 0:disable.*/
|
|
#define SPI_MEM_CACHE_REQ_EN (BIT(0))
|
|
#define SPI_MEM_CACHE_REQ_EN_M (BIT(0))
|
|
#define SPI_MEM_CACHE_REQ_EN_V 0x1
|
|
#define SPI_MEM_CACHE_REQ_EN_S 0
|
|
|
|
#define SPI_MEM_FSM_REG(i) (REG_SPI_MEM_BASE(i) + 0x054)
|
|
/* SPI_MEM_CSPI_LOCK_DELAY_TIME : R/W ;bitpos:[11:7] ;default: 5'd4 ; */
|
|
/*description: The lock delay time of SPI0/1 arbiter by cspi_st after PER is sent by SPI1.*/
|
|
#define SPI_MEM_CSPI_LOCK_DELAY_TIME 0x0000001F
|
|
#define SPI_MEM_CSPI_LOCK_DELAY_TIME_M ((SPI_MEM_CSPI_LOCK_DELAY_TIME_V)<<(SPI_MEM_CSPI_LOCK_DELAY_TIME_S))
|
|
#define SPI_MEM_CSPI_LOCK_DELAY_TIME_V 0x1F
|
|
#define SPI_MEM_CSPI_LOCK_DELAY_TIME_S 7
|
|
/* SPI_MEM_EM_ST : RO ;bitpos:[6:4] ;default: 3'h0 ; */
|
|
/*description: The current status of SPI0 master FSM: cspi_st. 0: idle state
|
|
1:EM_CACHE_GRANT 2: program/erase suspend state 3: SPI0 read data state 4: wait cache/EDMA sent data is stored in SPI0 TX FIFO 5: SPI0 write data state.*/
|
|
#define SPI_MEM_EM_ST 0x00000007
|
|
#define SPI_MEM_EM_ST_M ((SPI_MEM_EM_ST_V)<<(SPI_MEM_EM_ST_S))
|
|
#define SPI_MEM_EM_ST_V 0x7
|
|
#define SPI_MEM_EM_ST_S 4
|
|
/* SPI_MEM_CSPI_ST : RO ;bitpos:[3:0] ;default: 4'h0 ; */
|
|
/*description: The current status of SPI0 slave FSM: cspi_st. 0: idle state
|
|
1: preparation state 2: send command state 3: send address state 4: wait state 5: read data state 6:write data state 7: done state 8: read data end state.*/
|
|
#define SPI_MEM_CSPI_ST 0x0000000F
|
|
#define SPI_MEM_CSPI_ST_M ((SPI_MEM_CSPI_ST_V)<<(SPI_MEM_CSPI_ST_S))
|
|
#define SPI_MEM_CSPI_ST_V 0xF
|
|
#define SPI_MEM_CSPI_ST_S 0
|
|
|
|
#define SPI_MEM_W0_REG(i) (REG_SPI_MEM_BASE(i) + 0x058)
|
|
/* SPI_MEM_BUF0 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF0 0xFFFFFFFF
|
|
#define SPI_MEM_BUF0_M ((SPI_MEM_BUF0_V)<<(SPI_MEM_BUF0_S))
|
|
#define SPI_MEM_BUF0_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF0_S 0
|
|
|
|
#define SPI_MEM_W1_REG(i) (REG_SPI_MEM_BASE(i) + 0x05C)
|
|
/* SPI_MEM_BUF1 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF1 0xFFFFFFFF
|
|
#define SPI_MEM_BUF1_M ((SPI_MEM_BUF1_V)<<(SPI_MEM_BUF1_S))
|
|
#define SPI_MEM_BUF1_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF1_S 0
|
|
|
|
#define SPI_MEM_W2_REG(i) (REG_SPI_MEM_BASE(i) + 0x060)
|
|
/* SPI_MEM_BUF2 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF2 0xFFFFFFFF
|
|
#define SPI_MEM_BUF2_M ((SPI_MEM_BUF2_V)<<(SPI_MEM_BUF2_S))
|
|
#define SPI_MEM_BUF2_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF2_S 0
|
|
|
|
#define SPI_MEM_W3_REG(i) (REG_SPI_MEM_BASE(i) + 0x064)
|
|
/* SPI_MEM_BUF3 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF3 0xFFFFFFFF
|
|
#define SPI_MEM_BUF3_M ((SPI_MEM_BUF3_V)<<(SPI_MEM_BUF3_S))
|
|
#define SPI_MEM_BUF3_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF3_S 0
|
|
|
|
#define SPI_MEM_W4_REG(i) (REG_SPI_MEM_BASE(i) + 0x068)
|
|
/* SPI_MEM_BUF4 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF4 0xFFFFFFFF
|
|
#define SPI_MEM_BUF4_M ((SPI_MEM_BUF4_V)<<(SPI_MEM_BUF4_S))
|
|
#define SPI_MEM_BUF4_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF4_S 0
|
|
|
|
#define SPI_MEM_W5_REG(i) (REG_SPI_MEM_BASE(i) + 0x06C)
|
|
/* SPI_MEM_BUF5 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF5 0xFFFFFFFF
|
|
#define SPI_MEM_BUF5_M ((SPI_MEM_BUF5_V)<<(SPI_MEM_BUF5_S))
|
|
#define SPI_MEM_BUF5_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF5_S 0
|
|
|
|
#define SPI_MEM_W6_REG(i) (REG_SPI_MEM_BASE(i) + 0x070)
|
|
/* SPI_MEM_BUF6 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF6 0xFFFFFFFF
|
|
#define SPI_MEM_BUF6_M ((SPI_MEM_BUF6_V)<<(SPI_MEM_BUF6_S))
|
|
#define SPI_MEM_BUF6_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF6_S 0
|
|
|
|
#define SPI_MEM_W7_REG(i) (REG_SPI_MEM_BASE(i) + 0x074)
|
|
/* SPI_MEM_BUF7 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF7 0xFFFFFFFF
|
|
#define SPI_MEM_BUF7_M ((SPI_MEM_BUF7_V)<<(SPI_MEM_BUF7_S))
|
|
#define SPI_MEM_BUF7_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF7_S 0
|
|
|
|
#define SPI_MEM_W8_REG(i) (REG_SPI_MEM_BASE(i) + 0x078)
|
|
/* SPI_MEM_BUF8 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF8 0xFFFFFFFF
|
|
#define SPI_MEM_BUF8_M ((SPI_MEM_BUF8_V)<<(SPI_MEM_BUF8_S))
|
|
#define SPI_MEM_BUF8_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF8_S 0
|
|
|
|
#define SPI_MEM_W9_REG(i) (REG_SPI_MEM_BASE(i) + 0x07C)
|
|
/* SPI_MEM_BUF9 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF9 0xFFFFFFFF
|
|
#define SPI_MEM_BUF9_M ((SPI_MEM_BUF9_V)<<(SPI_MEM_BUF9_S))
|
|
#define SPI_MEM_BUF9_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF9_S 0
|
|
|
|
#define SPI_MEM_W10_REG(i) (REG_SPI_MEM_BASE(i) + 0x080)
|
|
/* SPI_MEM_BUF10 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF10 0xFFFFFFFF
|
|
#define SPI_MEM_BUF10_M ((SPI_MEM_BUF10_V)<<(SPI_MEM_BUF10_S))
|
|
#define SPI_MEM_BUF10_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF10_S 0
|
|
|
|
#define SPI_MEM_W11_REG(i) (REG_SPI_MEM_BASE(i) + 0x084)
|
|
/* SPI_MEM_BUF11 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF11 0xFFFFFFFF
|
|
#define SPI_MEM_BUF11_M ((SPI_MEM_BUF11_V)<<(SPI_MEM_BUF11_S))
|
|
#define SPI_MEM_BUF11_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF11_S 0
|
|
|
|
#define SPI_MEM_W12_REG(i) (REG_SPI_MEM_BASE(i) + 0x088)
|
|
/* SPI_MEM_BUF12 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF12 0xFFFFFFFF
|
|
#define SPI_MEM_BUF12_M ((SPI_MEM_BUF12_V)<<(SPI_MEM_BUF12_S))
|
|
#define SPI_MEM_BUF12_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF12_S 0
|
|
|
|
#define SPI_MEM_W13_REG(i) (REG_SPI_MEM_BASE(i) + 0x08C)
|
|
/* SPI_MEM_BUF13 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF13 0xFFFFFFFF
|
|
#define SPI_MEM_BUF13_M ((SPI_MEM_BUF13_V)<<(SPI_MEM_BUF13_S))
|
|
#define SPI_MEM_BUF13_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF13_S 0
|
|
|
|
#define SPI_MEM_W14_REG(i) (REG_SPI_MEM_BASE(i) + 0x090)
|
|
/* SPI_MEM_BUF14 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF14 0xFFFFFFFF
|
|
#define SPI_MEM_BUF14_M ((SPI_MEM_BUF14_V)<<(SPI_MEM_BUF14_S))
|
|
#define SPI_MEM_BUF14_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF14_S 0
|
|
|
|
#define SPI_MEM_W15_REG(i) (REG_SPI_MEM_BASE(i) + 0x094)
|
|
/* SPI_MEM_BUF15 : R/W/SS ;bitpos:[31:0] ;default: 32'b0 ; */
|
|
/*description: data buffer*/
|
|
#define SPI_MEM_BUF15 0xFFFFFFFF
|
|
#define SPI_MEM_BUF15_M ((SPI_MEM_BUF15_V)<<(SPI_MEM_BUF15_S))
|
|
#define SPI_MEM_BUF15_V 0xFFFFFFFF
|
|
#define SPI_MEM_BUF15_S 0
|
|
|
|
#define SPI_MEM_FLASH_WAITI_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x098)
|
|
/* SPI_MEM_WAITI_DUMMY_CYCLELEN : R/W ;bitpos:[15:10] ;default: 6'h0 ; */
|
|
/*description: The dummy cycle length when wait flash idle(RDSR).*/
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN 0x0000003F
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_M ((SPI_MEM_WAITI_DUMMY_CYCLELEN_V)<<(SPI_MEM_WAITI_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_V 0x3F
|
|
#define SPI_MEM_WAITI_DUMMY_CYCLELEN_S 10
|
|
/* SPI_MEM_WAITI_CMD : R/W ;bitpos:[9:2] ;default: 8'h05 ; */
|
|
/*description: The command to wait flash idle(RDSR).*/
|
|
#define SPI_MEM_WAITI_CMD 0x000000FF
|
|
#define SPI_MEM_WAITI_CMD_M ((SPI_MEM_WAITI_CMD_V)<<(SPI_MEM_WAITI_CMD_S))
|
|
#define SPI_MEM_WAITI_CMD_V 0xFF
|
|
#define SPI_MEM_WAITI_CMD_S 2
|
|
/* SPI_MEM_WAITI_DUMMY : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The dummy phase enable when wait flash idle (RDSR)*/
|
|
#define SPI_MEM_WAITI_DUMMY (BIT(1))
|
|
#define SPI_MEM_WAITI_DUMMY_M (BIT(1))
|
|
#define SPI_MEM_WAITI_DUMMY_V 0x1
|
|
#define SPI_MEM_WAITI_DUMMY_S 1
|
|
|
|
#define SPI_MEM_FLASH_SUS_CTRL_REG(i) (REG_SPI_MEM_BASE(i) + 0x09C)
|
|
/* SPI_MEM_SUS_TIMEOUT_CNT : R/W ;bitpos:[31:25] ;default: 7'h4 ; */
|
|
/*description: When SPI1 checks SUS/SUS1/SUS2 bits fail for SPI_MEM_SUS_TIMEOUT_CNT[6:0]
|
|
times it will be treated as check pass.*/
|
|
#define SPI_MEM_SUS_TIMEOUT_CNT 0x0000007F
|
|
#define SPI_MEM_SUS_TIMEOUT_CNT_M ((SPI_MEM_SUS_TIMEOUT_CNT_V)<<(SPI_MEM_SUS_TIMEOUT_CNT_S))
|
|
#define SPI_MEM_SUS_TIMEOUT_CNT_V 0x7F
|
|
#define SPI_MEM_SUS_TIMEOUT_CNT_S 25
|
|
/* SPI_MEM_PES_END_EN : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
/*description: 1: Both WIP and SUS/SUS1/SUS2 bits should be checked to insure
|
|
the suspend status of flash. 0: Only need to check WIP is 0.*/
|
|
#define SPI_MEM_PES_END_EN (BIT(24))
|
|
#define SPI_MEM_PES_END_EN_M (BIT(24))
|
|
#define SPI_MEM_PES_END_EN_V 0x1
|
|
#define SPI_MEM_PES_END_EN_S 24
|
|
/* SPI_MEM_PER_END_EN : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
/*description: 1: Both WIP and SUS/SUS1/SUS2 bits should be checked to insure
|
|
the resume status of flash. 0: Only need to check WIP is 0.*/
|
|
#define SPI_MEM_PER_END_EN (BIT(23))
|
|
#define SPI_MEM_PER_END_EN_M (BIT(23))
|
|
#define SPI_MEM_PER_END_EN_V 0x1
|
|
#define SPI_MEM_PER_END_EN_S 23
|
|
/* SPI_MEM_FMEM_RD_SUS_2B : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
/*description: 1: Read two bytes when check flash SUS/SUS1/SUS2 status bit.
|
|
0: Read one byte when check flash SUS/SUS1/SUS2 status bit*/
|
|
#define SPI_MEM_FMEM_RD_SUS_2B (BIT(22))
|
|
#define SPI_MEM_FMEM_RD_SUS_2B_M (BIT(22))
|
|
#define SPI_MEM_FMEM_RD_SUS_2B_V 0x1
|
|
#define SPI_MEM_FMEM_RD_SUS_2B_S 22
|
|
/* SPI_MEM_PESR_END_MSK : R/W ;bitpos:[21:6] ;default: 16'h80 ; */
|
|
/*description: The mask value when check SUS/SUS1/SUS2 status bit. If the read
|
|
status value is status_in[15:0](only status_in[7:0] is valid when only one byte of data is read out status_in[15:0] is valid when two bytes of data are read out) SUS/SUS1/SUS2 = status_in[15:0]^ SPI_MEM_PESR_END_MSK[15:0].*/
|
|
#define SPI_MEM_PESR_END_MSK 0x0000FFFF
|
|
#define SPI_MEM_PESR_END_MSK_M ((SPI_MEM_PESR_END_MSK_V)<<(SPI_MEM_PESR_END_MSK_S))
|
|
#define SPI_MEM_PESR_END_MSK_V 0xFFFF
|
|
#define SPI_MEM_PESR_END_MSK_S 6
|
|
/* SPI_MEM_FLASH_PES_EN : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: Set this bit to enable Auto-suspending function.*/
|
|
#define SPI_MEM_FLASH_PES_EN (BIT(5))
|
|
#define SPI_MEM_FLASH_PES_EN_M (BIT(5))
|
|
#define SPI_MEM_FLASH_PES_EN_V 0x1
|
|
#define SPI_MEM_FLASH_PES_EN_S 5
|
|
/* SPI_MEM_PES_PER_EN : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: Set this bit to enable PES transfer trigger PES transfer option.
|
|
If this bit is 0 application should send PER after PES is done.*/
|
|
#define SPI_MEM_PES_PER_EN (BIT(4))
|
|
#define SPI_MEM_PES_PER_EN_M (BIT(4))
|
|
#define SPI_MEM_PES_PER_EN_V 0x1
|
|
#define SPI_MEM_PES_PER_EN_S 4
|
|
/* SPI_MEM_FLASH_PES_WAIT_EN : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: Set this bit to enable SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0]
|
|
* 4) SPI_CLK cycles after program erase suspend.*/
|
|
#define SPI_MEM_FLASH_PES_WAIT_EN (BIT(3))
|
|
#define SPI_MEM_FLASH_PES_WAIT_EN_M (BIT(3))
|
|
#define SPI_MEM_FLASH_PES_WAIT_EN_V 0x1
|
|
#define SPI_MEM_FLASH_PES_WAIT_EN_S 3
|
|
/* SPI_MEM_FLASH_PER_WAIT_EN : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: Set this bit to enable SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0]
|
|
* 4) SPI_CLK cycles after program erase resume.*/
|
|
#define SPI_MEM_FLASH_PER_WAIT_EN (BIT(2))
|
|
#define SPI_MEM_FLASH_PER_WAIT_EN_M (BIT(2))
|
|
#define SPI_MEM_FLASH_PER_WAIT_EN_V 0x1
|
|
#define SPI_MEM_FLASH_PER_WAIT_EN_S 2
|
|
/* SPI_MEM_FLASH_PES : R/W/SC ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: program erase suspend bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PES (BIT(1))
|
|
#define SPI_MEM_FLASH_PES_M (BIT(1))
|
|
#define SPI_MEM_FLASH_PES_V 0x1
|
|
#define SPI_MEM_FLASH_PES_S 1
|
|
/* SPI_MEM_FLASH_PER : R/W/SC ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: program erase resume bit program erase suspend operation will
|
|
be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
|
|
#define SPI_MEM_FLASH_PER (BIT(0))
|
|
#define SPI_MEM_FLASH_PER_M (BIT(0))
|
|
#define SPI_MEM_FLASH_PER_V 0x1
|
|
#define SPI_MEM_FLASH_PER_S 0
|
|
|
|
#define SPI_MEM_FLASH_SUS_CMD_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A0)
|
|
/* SPI_MEM_WAIT_PESR_COMMAND : R/W ;bitpos:[31:16] ;default: 16'h05 ; */
|
|
/*description: Flash SUS/SUS1/SUS2 status bit read command. The command should
|
|
be sent when SUS/SUS1/SUS2 bit should be checked to insure the suspend or resume status of flash.*/
|
|
#define SPI_MEM_WAIT_PESR_COMMAND 0x0000FFFF
|
|
#define SPI_MEM_WAIT_PESR_COMMAND_M ((SPI_MEM_WAIT_PESR_COMMAND_V)<<(SPI_MEM_WAIT_PESR_COMMAND_S))
|
|
#define SPI_MEM_WAIT_PESR_COMMAND_V 0xFFFF
|
|
#define SPI_MEM_WAIT_PESR_COMMAND_S 16
|
|
/* SPI_MEM_FLASH_PES_COMMAND : R/W ;bitpos:[15:8] ;default: 8'h75 ; */
|
|
/*description: Program/Erase suspend command.*/
|
|
#define SPI_MEM_FLASH_PES_COMMAND 0x000000FF
|
|
#define SPI_MEM_FLASH_PES_COMMAND_M ((SPI_MEM_FLASH_PES_COMMAND_V)<<(SPI_MEM_FLASH_PES_COMMAND_S))
|
|
#define SPI_MEM_FLASH_PES_COMMAND_V 0xFF
|
|
#define SPI_MEM_FLASH_PES_COMMAND_S 8
|
|
/* SPI_MEM_FLASH_PER_COMMAND : R/W ;bitpos:[7:0] ;default: 8'h7a ; */
|
|
/*description: Program/Erase resume command.*/
|
|
#define SPI_MEM_FLASH_PER_COMMAND 0x000000FF
|
|
#define SPI_MEM_FLASH_PER_COMMAND_M ((SPI_MEM_FLASH_PER_COMMAND_V)<<(SPI_MEM_FLASH_PER_COMMAND_S))
|
|
#define SPI_MEM_FLASH_PER_COMMAND_V 0xFF
|
|
#define SPI_MEM_FLASH_PER_COMMAND_S 0
|
|
|
|
#define SPI_MEM_SUS_STATUS_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A4)
|
|
/* SPI_MEM_SPI0_LOCK_EN : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
/*description: 1: Enable SPI0 lock SPI0/1 arbiter option. 0: Disable it.*/
|
|
#define SPI_MEM_SPI0_LOCK_EN (BIT(7))
|
|
#define SPI_MEM_SPI0_LOCK_EN_M (BIT(7))
|
|
#define SPI_MEM_SPI0_LOCK_EN_V 0x1
|
|
#define SPI_MEM_SPI0_LOCK_EN_S 7
|
|
/* SPI_MEM_FLASH_PES_DLY_128 : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
/*description: Valid when SPI_MEM_FLASH_PES_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0]
|
|
* 128) SPI_CLK cycles after PES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 4) SPI_CLK cycles after PES command is sent.*/
|
|
#define SPI_MEM_FLASH_PES_DLY_128 (BIT(6))
|
|
#define SPI_MEM_FLASH_PES_DLY_128_M (BIT(6))
|
|
#define SPI_MEM_FLASH_PES_DLY_128_V 0x1
|
|
#define SPI_MEM_FLASH_PES_DLY_128_S 6
|
|
/* SPI_MEM_FLASH_PER_DLY_128 : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
/*description: Valid when SPI_MEM_FLASH_PER_WAIT_EN is 1. 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0]
|
|
* 128) SPI_CLK cycles after PER command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 4) SPI_CLK cycles after PER command is sent.*/
|
|
#define SPI_MEM_FLASH_PER_DLY_128 (BIT(5))
|
|
#define SPI_MEM_FLASH_PER_DLY_128_M (BIT(5))
|
|
#define SPI_MEM_FLASH_PER_DLY_128_V 0x1
|
|
#define SPI_MEM_FLASH_PER_DLY_128_S 5
|
|
/* SPI_MEM_FLASH_DP_DLY_128 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 128) SPI_CLK
|
|
cycles after DP command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 4) SPI_CLK cycles after DP command is sent.*/
|
|
#define SPI_MEM_FLASH_DP_DLY_128 (BIT(4))
|
|
#define SPI_MEM_FLASH_DP_DLY_128_M (BIT(4))
|
|
#define SPI_MEM_FLASH_DP_DLY_128_V 0x1
|
|
#define SPI_MEM_FLASH_DP_DLY_128_S 4
|
|
/* SPI_MEM_FLASH_RES_DLY_128 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 128) SPI_CLK
|
|
cycles after RES command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 4) SPI_CLK cycles after RES command is sent.*/
|
|
#define SPI_MEM_FLASH_RES_DLY_128 (BIT(3))
|
|
#define SPI_MEM_FLASH_RES_DLY_128_M (BIT(3))
|
|
#define SPI_MEM_FLASH_RES_DLY_128_V 0x1
|
|
#define SPI_MEM_FLASH_RES_DLY_128_S 3
|
|
/* SPI_MEM_FLASH_HPM_DLY_128 : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: 1: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 128) SPI_CLK
|
|
cycles after HPM command is sent. 0: SPI1 waits (SPI_MEM_CS_HOLD_DELAY_RES[9:0] * 4) SPI_CLK cycles after HPM command is sent.*/
|
|
#define SPI_MEM_FLASH_HPM_DLY_128 (BIT(2))
|
|
#define SPI_MEM_FLASH_HPM_DLY_128_M (BIT(2))
|
|
#define SPI_MEM_FLASH_HPM_DLY_128_V 0x1
|
|
#define SPI_MEM_FLASH_HPM_DLY_128_S 2
|
|
/* SPI_MEM_WAIT_PESR_CMD_2B : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: 1: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND[15:0] to check SUS/SUS1/SUS2
|
|
bit. 0: SPI1 sends out SPI_MEM_WAIT_PESR_COMMAND[7:0] to check SUS/SUS1/SUS2 bit.*/
|
|
#define SPI_MEM_WAIT_PESR_CMD_2B (BIT(1))
|
|
#define SPI_MEM_WAIT_PESR_CMD_2B_M (BIT(1))
|
|
#define SPI_MEM_WAIT_PESR_CMD_2B_V 0x1
|
|
#define SPI_MEM_WAIT_PESR_CMD_2B_S 1
|
|
/* SPI_MEM_FLASH_SUS : R/W/SS/SC ;bitpos:[0] ;default: 1'h0 ; */
|
|
/*description: The status of flash suspend only used in SPI1.*/
|
|
#define SPI_MEM_FLASH_SUS (BIT(0))
|
|
#define SPI_MEM_FLASH_SUS_M (BIT(0))
|
|
#define SPI_MEM_FLASH_SUS_V 0x1
|
|
#define SPI_MEM_FLASH_SUS_S 0
|
|
|
|
#define SPI_MEM_TIMING_CALI_REG(i) (REG_SPI_MEM_BASE(i) + 0x0A8)
|
|
/* SPI_MEM_EXTRA_DUMMY_CYCLELEN : R/W ;bitpos:[4:2] ;default: 3'd0 ; */
|
|
/*description: add extra dummy spi clock cycle length for spi clock calibration.*/
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN 0x00000007
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_M ((SPI_MEM_EXTRA_DUMMY_CYCLELEN_V)<<(SPI_MEM_EXTRA_DUMMY_CYCLELEN_S))
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_V 0x7
|
|
#define SPI_MEM_EXTRA_DUMMY_CYCLELEN_S 2
|
|
/* SPI_MEM_TIMING_CALI : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The bit is used to enable timing auto-calibration for all reading operations.*/
|
|
#define SPI_MEM_TIMING_CALI (BIT(1))
|
|
#define SPI_MEM_TIMING_CALI_M (BIT(1))
|
|
#define SPI_MEM_TIMING_CALI_V 0x1
|
|
#define SPI_MEM_TIMING_CALI_S 1
|
|
/* SPI_MEM_TIMING_CLK_ENA : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: The bit is used to enable timing adjust clock for all reading operations.*/
|
|
#define SPI_MEM_TIMING_CLK_ENA (BIT(0))
|
|
#define SPI_MEM_TIMING_CLK_ENA_M (BIT(0))
|
|
#define SPI_MEM_TIMING_CLK_ENA_V 0x1
|
|
#define SPI_MEM_TIMING_CLK_ENA_S 0
|
|
|
|
#define SPI_MEM_DIN_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x0AC)
|
|
/* SPI_MEM_DIN3_MODE : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN3_MODE 0x00000003
|
|
#define SPI_MEM_DIN3_MODE_M ((SPI_MEM_DIN3_MODE_V)<<(SPI_MEM_DIN3_MODE_S))
|
|
#define SPI_MEM_DIN3_MODE_V 0x3
|
|
#define SPI_MEM_DIN3_MODE_S 6
|
|
/* SPI_MEM_DIN2_MODE : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN2_MODE 0x00000003
|
|
#define SPI_MEM_DIN2_MODE_M ((SPI_MEM_DIN2_MODE_V)<<(SPI_MEM_DIN2_MODE_S))
|
|
#define SPI_MEM_DIN2_MODE_V 0x3
|
|
#define SPI_MEM_DIN2_MODE_S 4
|
|
/* SPI_MEM_DIN1_MODE : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN1_MODE 0x00000003
|
|
#define SPI_MEM_DIN1_MODE_M ((SPI_MEM_DIN1_MODE_V)<<(SPI_MEM_DIN1_MODE_S))
|
|
#define SPI_MEM_DIN1_MODE_V 0x3
|
|
#define SPI_MEM_DIN1_MODE_S 2
|
|
/* SPI_MEM_DIN0_MODE : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: input
|
|
without delayed 1: input with the posedge of clk_apb 2 input with the negedge of clk_apb 3: input with the posedge of clk_160 4 input with the negedge of clk_160 5: input with the spi_clk high edge 6: input with the spi_clk low edge*/
|
|
#define SPI_MEM_DIN0_MODE 0x00000003
|
|
#define SPI_MEM_DIN0_MODE_M ((SPI_MEM_DIN0_MODE_V)<<(SPI_MEM_DIN0_MODE_S))
|
|
#define SPI_MEM_DIN0_MODE_V 0x3
|
|
#define SPI_MEM_DIN0_MODE_S 0
|
|
|
|
#define SPI_MEM_DIN_NUM_REG(i) (REG_SPI_MEM_BASE(i) + 0x0B0)
|
|
/* SPI_MEM_DIN3_NUM : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN3_NUM 0x00000003
|
|
#define SPI_MEM_DIN3_NUM_M ((SPI_MEM_DIN3_NUM_V)<<(SPI_MEM_DIN3_NUM_S))
|
|
#define SPI_MEM_DIN3_NUM_V 0x3
|
|
#define SPI_MEM_DIN3_NUM_S 6
|
|
/* SPI_MEM_DIN2_NUM : R/W ;bitpos:[5:4] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN2_NUM 0x00000003
|
|
#define SPI_MEM_DIN2_NUM_M ((SPI_MEM_DIN2_NUM_V)<<(SPI_MEM_DIN2_NUM_S))
|
|
#define SPI_MEM_DIN2_NUM_V 0x3
|
|
#define SPI_MEM_DIN2_NUM_S 4
|
|
/* SPI_MEM_DIN1_NUM : R/W ;bitpos:[3:2] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN1_NUM 0x00000003
|
|
#define SPI_MEM_DIN1_NUM_M ((SPI_MEM_DIN1_NUM_V)<<(SPI_MEM_DIN1_NUM_S))
|
|
#define SPI_MEM_DIN1_NUM_V 0x3
|
|
#define SPI_MEM_DIN1_NUM_S 2
|
|
/* SPI_MEM_DIN0_NUM : R/W ;bitpos:[1:0] ;default: 2'h0 ; */
|
|
/*description: the input signals are delayed by system clock cycles 0: delayed
|
|
by 1 cycle 1: delayed by 2 cycles ...*/
|
|
#define SPI_MEM_DIN0_NUM 0x00000003
|
|
#define SPI_MEM_DIN0_NUM_M ((SPI_MEM_DIN0_NUM_V)<<(SPI_MEM_DIN0_NUM_S))
|
|
#define SPI_MEM_DIN0_NUM_V 0x3
|
|
#define SPI_MEM_DIN0_NUM_S 0
|
|
|
|
#define SPI_MEM_DOUT_MODE_REG(i) (REG_SPI_MEM_BASE(i) + 0x0B4)
|
|
/* SPI_MEM_DOUT3_MODE : R/W ;bitpos:[3] ;default: 1'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT3_MODE (BIT(3))
|
|
#define SPI_MEM_DOUT3_MODE_M (BIT(3))
|
|
#define SPI_MEM_DOUT3_MODE_V 0x1
|
|
#define SPI_MEM_DOUT3_MODE_S 3
|
|
/* SPI_MEM_DOUT2_MODE : R/W ;bitpos:[2] ;default: 1'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT2_MODE (BIT(2))
|
|
#define SPI_MEM_DOUT2_MODE_M (BIT(2))
|
|
#define SPI_MEM_DOUT2_MODE_V 0x1
|
|
#define SPI_MEM_DOUT2_MODE_S 2
|
|
/* SPI_MEM_DOUT1_MODE : R/W ;bitpos:[1] ;default: 1'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT1_MODE (BIT(1))
|
|
#define SPI_MEM_DOUT1_MODE_M (BIT(1))
|
|
#define SPI_MEM_DOUT1_MODE_V 0x1
|
|
#define SPI_MEM_DOUT1_MODE_S 1
|
|
/* SPI_MEM_DOUT0_MODE : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
/*description: the output signals are delayed by system clock cycles 0: output
|
|
without delayed 1: output with the posedge of clk_apb 2 output with the negedge of clk_apb 3: output with the posedge of clk_160 4 output with the negedge of clk_160 5: output with the spi_clk high edge 6: output with the spi_clk low edge*/
|
|
#define SPI_MEM_DOUT0_MODE (BIT(0))
|
|
#define SPI_MEM_DOUT0_MODE_M (BIT(0))
|
|
#define SPI_MEM_DOUT0_MODE_V 0x1
|
|
#define SPI_MEM_DOUT0_MODE_S 0
|
|
|
|
#define SPI_MEM_INT_ENA_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C0)
|
|
/* SPI_MEM_MST_ST_END_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The enable bit for SPI_MEM_MST_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_MST_ST_END_INT_ENA (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_ENA_M (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_MST_ST_END_INT_ENA_S 4
|
|
/* SPI_MEM_SLV_ST_END_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The enable bit for SPI_MEM_SLV_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_SLV_ST_END_INT_ENA (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_ENA_M (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_SLV_ST_END_INT_ENA_S 3
|
|
/* SPI_MEM_WPE_END_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The enable bit for SPI_MEM_WPE_END_INT interrupt.*/
|
|
#define SPI_MEM_WPE_END_INT_ENA (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_ENA_M (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_WPE_END_INT_ENA_S 2
|
|
/* SPI_MEM_PES_END_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The enable bit for SPI_MEM_PES_END_INT interrupt.*/
|
|
#define SPI_MEM_PES_END_INT_ENA (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_ENA_M (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_PES_END_INT_ENA_S 1
|
|
/* SPI_MEM_PER_END_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The enable bit for SPI_MEM_PER_END_INT interrupt.*/
|
|
#define SPI_MEM_PER_END_INT_ENA (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_ENA_M (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_ENA_V 0x1
|
|
#define SPI_MEM_PER_END_INT_ENA_S 0
|
|
|
|
#define SPI_MEM_INT_CLR_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C4)
|
|
/* SPI_MEM_MST_ST_END_INT_CLR : WT ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The clear bit for SPI_MEM_MST_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_MST_ST_END_INT_CLR (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_CLR_M (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_CLR_V 0x1
|
|
#define SPI_MEM_MST_ST_END_INT_CLR_S 4
|
|
/* SPI_MEM_SLV_ST_END_INT_CLR : WT ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The clear bit for SPI_MEM_SLV_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_SLV_ST_END_INT_CLR (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_CLR_M (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_CLR_V 0x1
|
|
#define SPI_MEM_SLV_ST_END_INT_CLR_S 3
|
|
/* SPI_MEM_WPE_END_INT_CLR : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The clear bit for SPI_MEM_WPE_END_INT interrupt.*/
|
|
#define SPI_MEM_WPE_END_INT_CLR (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_CLR_M (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_CLR_V 0x1
|
|
#define SPI_MEM_WPE_END_INT_CLR_S 2
|
|
/* SPI_MEM_PES_END_INT_CLR : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The clear bit for SPI_MEM_PES_END_INT interrupt.*/
|
|
#define SPI_MEM_PES_END_INT_CLR (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_CLR_M (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_CLR_V 0x1
|
|
#define SPI_MEM_PES_END_INT_CLR_S 1
|
|
/* SPI_MEM_PER_END_INT_CLR : WT ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The clear bit for SPI_MEM_PER_END_INT interrupt.*/
|
|
#define SPI_MEM_PER_END_INT_CLR (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_CLR_M (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_CLR_V 0x1
|
|
#define SPI_MEM_PER_END_INT_CLR_S 0
|
|
|
|
#define SPI_MEM_INT_RAW_REG(i) (REG_SPI_MEM_BASE(i) + 0x0C8)
|
|
/* SPI_MEM_MST_ST_END_INT_RAW : R/WTC/SS ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The raw bit for SPI_MEM_MST_ST_END_INT interrupt. 1: Triggered
|
|
when spi1_mst_st is changed from non idle state to idle state. 0: Others.*/
|
|
#define SPI_MEM_MST_ST_END_INT_RAW (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_RAW_M (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_RAW_V 0x1
|
|
#define SPI_MEM_MST_ST_END_INT_RAW_S 4
|
|
/* SPI_MEM_SLV_ST_END_INT_RAW : R/WTC/SS ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The raw bit for SPI_MEM_SLV_ST_END_INT interrupt. 1: Triggered
|
|
when spi1_slv_st is changed from non idle state to idle state. It means that SPI_CS raises high. 0: Others*/
|
|
#define SPI_MEM_SLV_ST_END_INT_RAW (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_RAW_M (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_RAW_V 0x1
|
|
#define SPI_MEM_SLV_ST_END_INT_RAW_S 3
|
|
/* SPI_MEM_WPE_END_INT_RAW : R/WTC/SS ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The raw bit for SPI_MEM_WPE_END_INT interrupt. 1: Triggered when
|
|
WRSR/PP/SE/BE/CE is sent and flash is already idle. 0: Others.*/
|
|
#define SPI_MEM_WPE_END_INT_RAW (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_RAW_M (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_RAW_V 0x1
|
|
#define SPI_MEM_WPE_END_INT_RAW_S 2
|
|
/* SPI_MEM_PES_END_INT_RAW : R/WTC/SS ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The raw bit for SPI_MEM_PES_END_INT interrupt.1: Triggered when
|
|
Auto Suspend command (0x75) is sent and flash is suspended. 0: Others.*/
|
|
#define SPI_MEM_PES_END_INT_RAW (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_RAW_M (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_RAW_V 0x1
|
|
#define SPI_MEM_PES_END_INT_RAW_S 1
|
|
/* SPI_MEM_PER_END_INT_RAW : R/WTC/SS ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The raw bit for SPI_MEM_PER_END_INT interrupt. 1: Triggered when
|
|
Auto Resume command (0x7A) is sent and flash is resumed. 0: Others.*/
|
|
#define SPI_MEM_PER_END_INT_RAW (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_RAW_M (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_RAW_V 0x1
|
|
#define SPI_MEM_PER_END_INT_RAW_S 0
|
|
|
|
#define SPI_MEM_INT_ST_REG(i) (REG_SPI_MEM_BASE(i) + 0x0CC)
|
|
/* SPI_MEM_MST_ST_END_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
/*description: The status bit for SPI_MEM_MST_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_MST_ST_END_INT_ST (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_ST_M (BIT(4))
|
|
#define SPI_MEM_MST_ST_END_INT_ST_V 0x1
|
|
#define SPI_MEM_MST_ST_END_INT_ST_S 4
|
|
/* SPI_MEM_SLV_ST_END_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
/*description: The status bit for SPI_MEM_SLV_ST_END_INT interrupt.*/
|
|
#define SPI_MEM_SLV_ST_END_INT_ST (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_ST_M (BIT(3))
|
|
#define SPI_MEM_SLV_ST_END_INT_ST_V 0x1
|
|
#define SPI_MEM_SLV_ST_END_INT_ST_S 3
|
|
/* SPI_MEM_WPE_END_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
/*description: The status bit for SPI_MEM_WPE_END_INT interrupt.*/
|
|
#define SPI_MEM_WPE_END_INT_ST (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_ST_M (BIT(2))
|
|
#define SPI_MEM_WPE_END_INT_ST_V 0x1
|
|
#define SPI_MEM_WPE_END_INT_ST_S 2
|
|
/* SPI_MEM_PES_END_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
/*description: The status bit for SPI_MEM_PES_END_INT interrupt.*/
|
|
#define SPI_MEM_PES_END_INT_ST (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_ST_M (BIT(1))
|
|
#define SPI_MEM_PES_END_INT_ST_V 0x1
|
|
#define SPI_MEM_PES_END_INT_ST_S 1
|
|
/* SPI_MEM_PER_END_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
/*description: The status bit for SPI_MEM_PER_END_INT interrupt.*/
|
|
#define SPI_MEM_PER_END_INT_ST (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_ST_M (BIT(0))
|
|
#define SPI_MEM_PER_END_INT_ST_V 0x1
|
|
#define SPI_MEM_PER_END_INT_ST_S 0
|
|
|
|
#define SPI_MEM_CLOCK_GATE_REG(i) (REG_SPI_MEM_BASE(i) + 0x0DC)
|
|
/* SPI_MEM_CLK_EN : R/W ;bitpos:[0] ;default: 1'b1 ; */
|
|
/*description: Register clock gate enable signal. 1: Enable. 0: Disable.*/
|
|
#define SPI_MEM_CLK_EN (BIT(0))
|
|
#define SPI_MEM_CLK_EN_M (BIT(0))
|
|
#define SPI_MEM_CLK_EN_V 0x1
|
|
#define SPI_MEM_CLK_EN_S 0
|
|
|
|
#define SPI_MEM_CORE_CLK_SEL_REG(i) (REG_SPI_MEM_BASE(i) + 0x0E0)
|
|
/* SPI_MEM_SPI01_CLK_SEL : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
|
|
/*description: When the digital system clock selects PLL clock and the frequency
|
|
of PLL clock is 480MHz the value of reg_spi01_clk_sel: 0: SPI0/1 module clock (clk) is 80MHz. 1: SPI0/1 module clock (clk) is 120MHz. 2: SPI0/1 module clock (clk) 160MHz. 3: Not used. When the digital system clock selects PLL clock and the frequency of PLL clock is 320MHz the value of reg_spi01_clk_sel: 0: SPI0/1 module clock (clk) is 80MHz. 1: SPI0/1 module clock (clk) is 80MHz. 2: SPI0/1 module clock (clk) 160MHz. 3: Not used.*/
|
|
#define SPI_MEM_SPI01_CLK_SEL 0x00000003
|
|
#define SPI_MEM_SPI01_CLK_SEL_M ((SPI_MEM_SPI01_CLK_SEL_V)<<(SPI_MEM_SPI01_CLK_SEL_S))
|
|
#define SPI_MEM_SPI01_CLK_SEL_V 0x3
|
|
#define SPI_MEM_SPI01_CLK_SEL_S 0
|
|
|
|
#define SPI_MEM_DATE_REG(i) (REG_SPI_MEM_BASE(i) + 0x3FC)
|
|
/* SPI_MEM_DATE : R/W ;bitpos:[27:0] ;default: 28'h2007170 ; */
|
|
/*description: Version control register*/
|
|
#define SPI_MEM_DATE 0x0FFFFFFF
|
|
#define SPI_MEM_DATE_M ((SPI_MEM_DATE_V)<<(SPI_MEM_DATE_S))
|
|
#define SPI_MEM_DATE_V 0xFFFFFFF
|
|
#define SPI_MEM_DATE_S 0
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
#endif /*_SOC_SPI_MEM_REG_H_ */
|