esp-idf/components/esp32/dport_panic_highint_hdl.S
2017-09-22 12:07:05 +08:00

205 lines
6.1 KiB
ArmAsm

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <xtensa/coreasm.h>
#include <xtensa/corebits.h>
#include <xtensa/config/system.h>
#include <xtensa/simcall.h>
#include "freertos/xtensa_context.h"
#include "esp_panic.h"
#include "sdkconfig.h"
#include "soc/soc.h"
#include "soc/dport_reg.h"
/*
Interrupt , a high-priority interrupt, is used for several things:
- Dport access mediation
- Cache error panic handler
- Interrupt watchdog panic handler
*/
#define L4_INTR_STACK_SIZE 8
#define L4_INTR_A2_OFFSET 0
#define L4_INTR_A3_OFFSET 4
.data
_l4_intr_stack:
.space L4_INTR_STACK_SIZE
.section .iram1,"ax"
.global xt_highint4
.type xt_highint4,@function
.align 4
xt_highint4:
#ifndef CONFIG_FREERTOS_UNICORE
/* See if we're here for the dport access interrupt */
rsr a0, INTERRUPT
extui a0, a0, ETS_DPORT_INUM, 1
bnez a0, .handle_dport_access_int
#endif // CONFIG_FREERTOS_UNICORE
/* Allocate exception frame and save minimal context. */
mov a0, sp
addi sp, sp, -XT_STK_FRMSZ
s32i a0, sp, XT_STK_A1
#if XCHAL_HAVE_WINDOWED
s32e a0, sp, -12 /* for debug backtrace */
#endif
rsr a0, PS /* save interruptee's PS */
s32i a0, sp, XT_STK_PS
rsr a0, EPC_4 /* save interruptee's PC */
s32i a0, sp, XT_STK_PC
#if XCHAL_HAVE_WINDOWED
s32e a0, sp, -16 /* for debug backtrace */
#endif
s32i a12, sp, XT_STK_A12 /* _xt_context_save requires A12- */
s32i a13, sp, XT_STK_A13 /* A13 to have already been saved */
call0 _xt_context_save
/* Save vaddr into exception frame */
rsr a0, EXCVADDR
s32i a0, sp, XT_STK_EXCVADDR
/* Figure out reason, save into EXCCAUSE reg */
rsr a0, INTERRUPT
extui a0, a0, ETS_CACHEERR_INUM, 1 /* get cacheerr int bit */
beqz a0, 1f
/* Kill this interrupt; we cannot reset it. */
rsr a0, INTENABLE
movi a4, ~(1<<ETS_CACHEERR_INUM)
and a0, a4, a0
wsr a0, INTENABLE
movi a0, PANIC_RSN_CACHEERR
j 9f
1:
#if CONFIG_INT_WDT_CHECK_CPU1
/* Check if the cause is the app cpu failing to tick.*/
movi a0, int_wdt_app_cpu_ticked
l32i a0, a0, 0
bnez a0, 2f
/* It is. Modify cause. */
movi a0,PANIC_RSN_INTWDT_CPU1
j 9f
2:
#endif
/* Set EXCCAUSE to reflect cause of the wdt int trigger */
movi a0,PANIC_RSN_INTWDT_CPU0
9:
/* Found the reason, now save it. */
s32i a0, sp, XT_STK_EXCCAUSE
/* _xt_context_save seems to save the current a0, but we need the interuptees a0. Fix this. */
rsr a0, EXCSAVE_4 /* save interruptee's a0 */
s32i a0, sp, XT_STK_A0
/* Set up PS for C, disable all interrupts except NMI and debug, and clear EXCM. */
movi a0, PS_INTLEVEL(5) | PS_UM | PS_WOE
wsr a0, PS
//Call panic handler
mov a6,sp
call4 panicHandler
call0 _xt_context_restore
l32i a0, sp, XT_STK_PS /* retrieve interruptee's PS */
wsr a0, PS
l32i a0, sp, XT_STK_PC /* retrieve interruptee's PC */
wsr a0, EPC_4
l32i a0, sp, XT_STK_A0 /* retrieve interruptee's A0 */
l32i sp, sp, XT_STK_A1 /* remove exception frame */
rsync /* ensure PS and EPC written */
rsr a0, EXCSAVE_4 /* restore a0 */
rfi 4
#ifndef CONFIG_FREERTOS_UNICORE
.align 4
.handle_dport_access_int:
/* This section is for dport access register protection */
/* Allocate exception frame and save minimal context. */
/* Because the interrupt cause code has protection that only
allows one cpu to enter in the dport section of the L4
interrupt at one time, there's no need to have two
_l4_intr_stack for each cpu */
/* This int is edge-triggered and needs clearing. */
movi a0, (1<<ETS_DPORT_INUM)
wsr a0, INTCLEAR
/* Save A2, A3 so we can use those registers */
movi a0, _l4_intr_stack
s32i a2, a0, L4_INTR_A2_OFFSET
s32i a3, a0, L4_INTR_A3_OFFSET
/* handle dport interrupt */
/* get CORE_ID */
getcoreid a0
beqz a0, 2f
/* current cpu is 1 */
movi a0, DPORT_CPU_INTR_FROM_CPU_3_REG
movi a2, 0
s32i a2, a0, 0 /* clear intr */
movi a0, 0 /* other cpu id */
j 3f
2:
/* current cpu is 0 */
movi a0, DPORT_CPU_INTR_FROM_CPU_2_REG
movi a2, 0
s32i a2, a0, 0 /* clear intr */
movi a0, 1 /* other cpu id */
3:
/* set and wait flag */
movi a2, dport_access_start
addx4 a2, a0, a2
movi a3, 1
s32i a3, a2, 0
memw
movi a2, dport_access_end
addx4 a2, a0, a2
.check_dport_access_end:
l32i a3, a2, 0
beqz a3, .check_dport_access_end
/* Done. Restore registers and return. */
movi a0, _l4_intr_stack
l32i a2, a0, L4_INTR_A2_OFFSET
l32i a3, a0, L4_INTR_A3_OFFSET
rsync /* ensure register restored */
rsr a0, EXCSAVE_4 /* restore a0 */
rfi 4
#endif // CONFIG_FREERTOS_UNICORE
/* The linker has no reason to link in this file; all symbols it exports are already defined
(weakly!) in the default int handler. Define a symbol here so we can use it to have the
linker inspect this anyway. */
.global ld_include_panic_highint_hdl
ld_include_panic_highint_hdl: