esp-idf/components/esp_hw_support/include/esp_mac.h

196 lines
6.9 KiB
C

/*
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "esp_err.h"
#include "sdkconfig.h"
#ifndef MAC2STR
#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
#endif
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ESP_MAC_WIFI_STA,
ESP_MAC_WIFI_SOFTAP,
ESP_MAC_BT,
ESP_MAC_ETH,
ESP_MAC_IEEE802154,
ESP_MAC_BASE,
ESP_MAC_EFUSE_FACTORY,
ESP_MAC_EFUSE_CUSTOM,
} esp_mac_type_t;
/** @cond */
#define TWO_UNIVERSAL_MAC_ADDR 2
#define FOUR_UNIVERSAL_MAC_ADDR 4
#if CONFIG_IDF_TARGET_ESP32
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32S2
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S2_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32S3
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C3
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32H4
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32H4_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C2
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C2_UNIVERSAL_MAC_ADDRESSES
#elif CONFIG_IDF_TARGET_ESP32C6
#define UNIVERSAL_MAC_ADDR_NUM CONFIG_ESP32C6_UNIVERSAL_MAC_ADDRESSES
#endif
/** @endcond */
/**
* @brief Set base MAC address with the MAC address which is stored in BLK3 of EFUSE or
* external storage e.g. flash and EEPROM.
*
* Base MAC address is used to generate the MAC addresses used by network interfaces.
*
* If using a custom base MAC address, call this API before initializing any network interfaces.
* Refer to the ESP-IDF Programming Guide for details about how the Base MAC is used.
*
* @note Base MAC must be a unicast MAC (least significant bit of first byte must be zero).
*
* @note If not using a valid OUI, set the "locally administered" bit
* (bit value 0x02 in the first byte) to avoid collisions.
*
* @param mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
*
* @return ESP_OK on success
* ESP_ERR_INVALID_ARG If mac is NULL or is not a unicast MAC
*/
esp_err_t esp_base_mac_addr_set(const uint8_t *mac);
/**
* @brief Return base MAC address which is set using esp_base_mac_addr_set.
*
* @note If no custom Base MAC has been set, this returns the pre-programmed Espressif base MAC address.
*
* @param mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
*
* @return ESP_OK on success
* ESP_ERR_INVALID_ARG mac is NULL
* ESP_ERR_INVALID_MAC base MAC address has not been set
*/
esp_err_t esp_base_mac_addr_get(uint8_t *mac);
/**
* @brief Return base MAC address which was previously written to BLK3 of EFUSE.
*
* Base MAC address is used to generate the MAC addresses used by the networking interfaces.
* This API returns the custom base MAC address which was previously written to EFUSE BLK3 in
* a specified format.
*
* Writing this EFUSE allows setting of a different (non-Espressif) base MAC address. It is also
* possible to store a custom base MAC address elsewhere, see esp_base_mac_addr_set() for details.
*
* @note This function is currently only supported on ESP32.
*
* @param mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
*
* @return ESP_OK on success
* ESP_ERR_INVALID_ARG mac is NULL
* ESP_ERR_INVALID_MAC CUSTOM_MAC address has not been set, all zeros (for esp32-xx)
* ESP_ERR_INVALID_VERSION An invalid MAC version field was read from BLK3 of EFUSE (for esp32)
* ESP_ERR_INVALID_CRC An invalid MAC CRC was read from BLK3 of EFUSE (for esp32)
*/
esp_err_t esp_efuse_mac_get_custom(uint8_t *mac);
/**
* @brief Return base MAC address which is factory-programmed by Espressif in EFUSE.
*
* @param mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
*
* @return ESP_OK on success
* ESP_ERR_INVALID_ARG mac is NULL
*/
esp_err_t esp_efuse_mac_get_default(uint8_t *mac);
/**
* @brief Read base MAC address and set MAC address of the interface.
*
* This function first get base MAC address using esp_base_mac_addr_get().
* Then calculates the MAC address of the specific interface requested,
* refer to ESP-IDF Programming Guide for the algorithm.
*
* The MAC address set by the esp_iface_mac_addr_set() function will not depend on the base MAC address.
*
* @param mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
* @param type Type of MAC address to return
*
* @return ESP_OK on success
*/
esp_err_t esp_read_mac(uint8_t *mac, esp_mac_type_t type);
/**
* @brief Derive local MAC address from universal MAC address.
*
* This function copies a universal MAC address and then sets the "locally
* administered" bit (bit 0x2) in the first octet, creating a locally
* administered MAC address.
*
* If the universal MAC address argument is already a locally administered MAC
* address, then the first octet is XORed with 0x4 in order to create a different
* locally administered MAC address.
*
* @param local_mac base MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for IEEE 802.15.4)
* @param universal_mac Source universal MAC address, length: 6 bytes.
*
* @return ESP_OK on success
*/
esp_err_t esp_derive_local_mac(uint8_t *local_mac, const uint8_t *universal_mac);
/**
* @brief Set custom MAC address of the interface. This function allows you to overwrite the MAC addresses
* of the interfaces set by the base MAC address.
*
* @param mac MAC address, length: 6 bytes/8 bytes.
* length: 6 bytes for MAC-48
* 8 bytes for EUI-64(used for ESP_MAC_IEEE802154 type)
* @param type Type of MAC address
*
* @return ESP_OK on success
*/
esp_err_t esp_iface_mac_addr_set(const uint8_t *mac, esp_mac_type_t type);
/**
* @brief Return the size of the MAC type in bytes.
*
* If CONFIG_IEEE802154_ENABLED is set then for these types:
* ESP_MAC_IEEE802154, ESP_MAC_BASE, ESP_MAC_EFUSE_FACTORY and ESP_MAC_EFUSE_CUSTOM the MAC size is 8 bytes.
* If CONFIG_IEEE802154_ENABLED is not set then for all types it returns 6 bytes.
*
* @param type Type of MAC address
*
* @return 0 MAC type not found (not supported)
* 6 bytes for MAC-48.
* 8 bytes for EUI-64.
*/
size_t esp_mac_addr_len_get(esp_mac_type_t type);
#ifdef __cplusplus
}
#endif