mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
32 lines
1.5 KiB
ReStructuredText
32 lines
1.5 KiB
ReStructuredText
Thread
|
|
==========
|
|
|
|
:link_to_translation:`zh_CN:[中文]`
|
|
|
|
Introduction
|
|
------------
|
|
|
|
`Thread <https://www.threadgroup.org>`_ is an IP-based mesh networking protocol. It is based on the 802.15.4 physical and MAC layer.
|
|
|
|
Application Examples
|
|
--------------------
|
|
|
|
- :example:`openthread/ot_br` demonstrates how to set up a Thread border router on {IDF_TARGET_NAME}, enabling functionalities such as bidirectional IPv6 connectivity, service discovery, etc.
|
|
|
|
- :example:`openthread/ot_cli` demonstrates how to use the OpenThread Command Line Interface with additional features such as TCP, UDP, and Iperf. This requires a board equipped with an IEEE 802.15.4 module. This example provides instructions on how to set up a network using at least two 802.15.4 boards.
|
|
|
|
- :example:`openthread/ot_rcp` demonstrates how to work with a Host Processor to perform as a Thread border router and function as a Thread sniffer, using a board with an IEEE 802.15.4 module.
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
For manipulating the Thread network, the OpenThread API shall be used. The OpenThread API docs can be found at the `OpenThread API docs <https://openthread.io/reference>`_.
|
|
|
|
ESP-IDF provides extra APIs for launching and managing the OpenThread stack, binding to network interfaces and border routing features.
|
|
|
|
.. include-build-file:: inc/esp_openthread.inc
|
|
.. include-build-file:: inc/esp_openthread_types.inc
|
|
.. include-build-file:: inc/esp_openthread_lock.inc
|
|
.. include-build-file:: inc/esp_openthread_netif_glue.inc
|
|
.. include-build-file:: inc/esp_openthread_border_router.inc
|