esp-idf/components/esp_system/port/arch/riscv/panic_arch.c

// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdio.h>

#include "soc/extmem_reg.h"
#include "esp_private/panic_internal.h"
#include "esp_private/panic_reason.h"
#include "riscv/rvruntime-frames.h"
#include "cache_err_int.h"

#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#include "esp32c3/memprot.h"
#endif

#define DIM(array) (sizeof(array)/sizeof(*array))

/**
 * Structure used to define a flag/bit to test in case of cache error.
 * The message describes the cause of the error when the bit is set in
 * a given status register.
 */
typedef struct {
    const uint32_t bit;
    const char *msg;
} register_bit_t;

/**
 * Function to check each bits defined in the array reg_bits in the given
 * status register. The first bit from the array to be set in the status
 * register will have its associated message printed. This function returns
 * true. If not bit was set in the register, it returns false.
 * The order of the bits in the array is important as only the first bit to
 * be set in the register will have its associated message printed.
 */
static inline bool test_and_print_register_bits(const uint32_t status,
        const register_bit_t *reg_bits,
        const uint32_t size)
{
    /* Browse the flag/bit array and test each one with the given status
     * register. */
    for (int i = 0; i < size; i++) {
        const uint32_t bit = reg_bits[i].bit;
        if ((status & bit) == bit) {
            /* Reason of the panic found, print the reason. */
            panic_print_str(reg_bits[i].msg);
            panic_print_str("\r\n");

            return true;
        }
    }

    /* Panic cause not found, no message was printed. */
    return false;
}

/**
 * Function called when a cache error occurs. It prints details such as the
 * explanation of why the panic occured.
 */
static inline void print_cache_err_details(const void *frame)
{
    /* Define the array that contains the status (bits) to test on the register
     * EXTMEM_CORE0_ACS_CACHE_INT_ST_REG. each bit is accompanied by a small
     * message.
     * The messages have been pulled from the header file where the status bit
     * are defined. */
    const register_bit_t core0_acs_bits[] = {
        {
            .bit = EXTMEM_CORE0_DBUS_WR_ICACHE_ST,
            .msg = "dbus tried to write cache"
        },
        {
            .bit = EXTMEM_CORE0_DBUS_REJECT_ST,
            .msg = "dbus authentication failed"
        },
        {
            .bit = EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST,
            .msg = "access to cache while dbus or cache is disabled"
        },
        {
            .bit = EXTMEM_CORE0_IBUS_REJECT_ST,
            .msg = "ibus authentication failed"
        },
        {
            .bit = EXTMEM_CORE0_IBUS_WR_ICACHE_ST,
            .msg = "ibus tried to write cache"
        },
        {
            .bit = EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST,
            .msg = "access to cache while ibus or cache is disabled"
        },
    };

    /* Same goes for the register EXTMEM_CACHE_ILG_INT_ST_REG and its bits. */
    const register_bit_t cache_ilg_bits[] = {
        {
            .bit = EXTMEM_MMU_ENTRY_FAULT_ST,
            .msg = "MMU entry fault"
        },
        {
            .bit = EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST,
            .msg = "preload configurations fault"
        },
        {
            .bit = EXTMEM_ICACHE_SYNC_OP_FAULT_ST,
            .msg = "sync configurations fault"
        },
    };

    /* Read the status register EXTMEM_CORE0_ACS_CACHE_INT_ST_REG. This status
     * register is not equal to 0 when a cache access error occured. */
    const uint32_t core0_status = REG_READ(EXTMEM_CORE0_ACS_CACHE_INT_ST_REG);

    /* If the panic is due to a cache access error, one of the bit of the
     * register is set. Thus, this function will return true. */
    bool handled = test_and_print_register_bits(core0_status, core0_acs_bits, DIM(core0_acs_bits));

    /* If the panic was due to a cache illegal error, the previous call returned false and this
     * EXTMEM_CACHE_ILG_INT_ST_REG register should not me equal to 0.
     * Check each bit of it and print the message associated if found. */
    if (!handled) {
        const uint32_t cache_ilg_status = REG_READ(EXTMEM_CACHE_ILG_INT_ST_REG);
        handled = test_and_print_register_bits(cache_ilg_status, cache_ilg_bits, DIM(cache_ilg_bits));

        /* If the error was not found, print the both registers value */
        if (!handled) {
            panic_print_str("EXTMEM_CORE0_ACS_CACHE_INT_ST_REG = 0x");
            panic_print_hex(core0_status);
            panic_print_str("\r\nEXTMEM_CACHE_ILG_INT_ST_REG = 0x");
            panic_print_hex(cache_ilg_status);
            panic_print_str("\r\n");
        }
    }
}


/**
 * Function called when a memory protection error occurs (PMS). It prints details such as the
 * explanation of why the panic occured.
 */
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
static inline void print_memprot_err_details(const void *frame __attribute__((unused)))
{
    //common memprot fault info
    mem_type_prot_t mem_type = esp_memprot_get_active_intr_memtype();
    panic_print_str( "  memory type: ");
    panic_print_str( esp_memprot_mem_type_to_str(mem_type) );
    panic_print_str( "\r\n  faulting address: 0x");
    panic_print_hex( esp_memprot_get_violate_addr(mem_type) );
    panic_print_str( "\r\n  world:");
    panic_print_dec( esp_memprot_get_violate_world(mem_type) );

    char operation = 0;
    // IRAM fault: check instruction-fetch flag
    if ( mem_type == MEMPROT_IRAM0_SRAM ) {
        if ( esp_memprot_get_violate_loadstore(mem_type) ) {
            operation = 'X';
        }
    }
    // W/R - common
    if ( operation == 0 ) {
        operation = esp_memprot_get_violate_wr(mem_type) == MEMPROT_PMS_OP_WRITE ? 'W' : 'R';
    }
    panic_print_str( "\r\n  operation type: ");
    panic_print_char( operation );

    // DRAM/DMA fault: check byte-enables
    if ( mem_type == MEMPROT_DRAM0_SRAM ) {
        panic_print_str("\r\n  byte-enables: " );
        panic_print_hex(esp_memprot_get_violate_byte_en(mem_type));
    }

    panic_print_str("\r\n");
}
#endif

void panic_print_registers(const void *f, int core)
{
    uint32_t *regs = (uint32_t *)f;

    // only print ABI name
    const char *desc[] = {
        "MEPC    ", "RA      ", "SP      ", "GP      ", "TP      ", "T0      ", "T1      ", "T2      ",
        "S0/FP   ", "S1      ", "A0      ", "A1      ", "A2      ", "A3      ", "A4      ", "A5      ",
        "A6      ", "A7      ", "S2      ", "S3      ", "S4      ", "S5      ", "S6      ", "S7      ",
        "S8      ", "S9      ", "S10     ", "S11     ", "T3      ", "T4      ", "T5      ", "T6      ",
        "MSTATUS ", "MTVEC   ", "MCAUSE  ", "MTVAL   ", "MHARTID "
    };

    panic_print_str("Core ");
    panic_print_dec(((RvExcFrame *)f)->mhartid);
    panic_print_str(" register dump:");

    for (int x = 0; x < sizeof(desc) / sizeof(desc[0]); x += 4) {
        panic_print_str("\r\n");
        for (int y = 0; y < 4 && x + y < sizeof(desc) / sizeof(desc[0]); y++) {
            if (desc[x + y][0] != 0) {
                panic_print_str(desc[x + y]);
                panic_print_str(": 0x");
                panic_print_hex(regs[x + y]);
                panic_print_str("  ");
            }
        }
    }
}

/**
 * This function will be called when a SoC-level panic occurs.
 * SoC-level panics include cache errors and watchdog interrupts.
 */
void panic_soc_fill_info(void *f, panic_info_t *info)
{
    RvExcFrame *frame = (RvExcFrame *) f;

    /* Please keep in sync with PANIC_RSN_* defines */
    static const char *pseudo_reason[PANIC_RSN_COUNT] = {
        "Unknown reason",
        "Interrupt wdt timeout on CPU0",
#if SOC_CPU_NUM > 1
        "Interrupt wdt timeout on CPU1",
#endif
        "Cache error",
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
        "Memory protection fault",
#endif
    };

    info->reason = pseudo_reason[0];
    info->addr = (void *) frame->mepc;

    /* The mcause has been set by the CPU when the panic occured.
     * All SoC-level panic will call this function, thus, this register
     * lets us know which error was triggered. */
    if (frame->mcause == ETS_CACHEERR_INUM) {
        /* Panic due to a cache error, multiple cache error are possible,
         * assign function print_cache_err_details to our structure's
         * details field. As its name states, it will give more details
         * about why the error happened. */

        info->core = esp_cache_err_get_cpuid();
        info->reason = pseudo_reason[PANIC_RSN_CACHEERR];
        info->details = print_cache_err_details;

    } else if (frame->mcause == ETS_T1_WDT_INUM) {
        /* Watchdog interrupt occured, get the core on which it happened
         * and update the reason/message accordingly. */

        const int core = esp_cache_err_get_cpuid();
        info->core = core;
        info->exception = PANIC_EXCEPTION_IWDT;

#if SOC_CPU_NUM > 1
        _Static_assert(PANIC_RSN_INTWDT_CPU0 + 1 == PANIC_RSN_INTWDT_CPU1,
                       "PANIC_RSN_INTWDT_CPU1 must be equal to PANIC_RSN_INTWDT_CPU0 + 1");
#endif
        info->reason = pseudo_reason[PANIC_RSN_INTWDT_CPU0 + core];
    }
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
    else if ( frame->mcause == ETS_MEMPROT_ERR_INUM ) {

        info->core = esp_memprot_intr_get_cpuid();
        info->reason = pseudo_reason[PANIC_RSN_MEMPROT];
        info->details = print_memprot_err_details;
    }
#endif
}

void panic_arch_fill_info(void *frame, panic_info_t *info)
{
    RvExcFrame *regs = (RvExcFrame *) frame;
    info->core = 0;
    info->exception = PANIC_EXCEPTION_FAULT;

    //Please keep in sync with PANIC_RSN_* defines
    static const char *reason[] = {
        "Instruction address misaligned",
        "Instruction access fault",
        "Illegal instruction",
        "Breakpoint",
        "Load address misaligned",
        "Load access fault",
        "Store address misaligned",
        "Store access fault",
        "Environment call from U-mode",
        "Environment call from S-mode",
        NULL,
        "Environment call from M-mode",
        "Instruction page fault",
        "Load page fault",
        NULL,
        "Store page fault",
    };

    if (regs->mcause < (sizeof(reason) / sizeof(reason[0]))) {
        if (reason[regs->mcause] != NULL) {
            info->reason = (reason[regs->mcause]);
        }
    }

    info->description = "Exception was unhandled.";

    info->addr = (void *) regs->mepc;
    info->frame = &regs;
}

void panic_print_backtrace(const void *frame, int core)
{
    // Basic backtrace
    panic_print_str("\r\nStack memory:\r\n");
    uint32_t sp = (uint32_t)((RvExcFrame *)frame)->sp;
    const int per_line = 8;
    for (int x = 0; x < 1024; x += per_line * sizeof(uint32_t)) {
        uint32_t *spp = (uint32_t *)(sp + x);
        panic_print_hex(sp + x);
        panic_print_str(": ");
        for (int y = 0; y < per_line; y++) {
            panic_print_str("0x");
            panic_print_hex(spp[y]);
            panic_print_str(y == per_line - 1 ? "\r\n" : " ");
        }
    }
}

uint32_t panic_get_address(const void *f)
{
    return ((RvExcFrame *)f)->mepc;
}

uint32_t panic_get_cause(const void *f)
{
    return ((RvExcFrame *)f)->mcause;
}

void panic_set_address(void *f, uint32_t addr)
{
    ((RvExcFrame *)f)->mepc = addr;
}