esp-idf/components/idf_test/integration_test/TC_IT_BTSTK_GATT.yml

2598 lines
91 KiB
YAML

.GATT_CASE: &GATT_CASE
SDK: ESP32_IDF
Test App: SSC_BLE
auto test: 'Yes'
category: Function
test point 1: basic function
initial condition: BLE_CONN2
test environment: SSC_T2_1
execution time: 0
module: BT Stack
sub module: GATT
version: v1 (2016-12-31)
CI ready: 'Yes'
level: Integration
allow fail: ''
.primary_service_discovery: &primary_service_discovery
LIST_MERGE:
- - "SSC SSC1 gattc -D -z primaryService -p 0x10"
- ["R SSC1 C +GATTC:Discover,OK"]
.included_service_connection: &included_service_connection
LIST_MERGE:
- - "SSC SSC2 gatts -S -z load -p 0xA1"
- ["R SSC2 C +GATTS:StartService,OK,A001"]
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ["R SSC1 C +BLE:GattcConnect,OK,0010", "R SSC2 C +BLE:GattsConnect"]
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- ['R SSC1 C +GATTC:OK']
.register_notify_c107: &register_notify_c107
LIST_MERGE:
- - "SSC SSC1 gattc -N -z register -s 0xA000 -c 0xC107 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A000,C107"]
.register_indicate_c108: &register_indicate_c108
LIST_MERGE:
- - "SSC SSC1 gattc -N -z register -s 0xA000 -c 0xC108 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A000,C108"]
test cases:
- ID: BTSTK_GATT_01001
<<: *GATT_CASE
test point 2: BLE GATT server create service
summary: create service, add char and descriptor and start service
steps: |
1. create preset service 0xA000
expected result: |
1. succeed
initial condition: BLE_INIT1
test environment: SSC_T1_1
cmd set:
- ""
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ["R SSC1 C +GATTS:StartService,OK,A000"]
- ID: BTSTK_GATT_01002
<<: *GATT_CASE
test point 2: BLE GATT server create service
summary: create service and include another service
steps: |
1. create preset service 0xA000
2. create preset service 0xA001
expected result: |
1. succeed
2. succeed
initial condition: BLE_INIT1
test environment: SSC_T1_1
cmd set:
- ""
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ["R SSC1 C +GATTS:StartService,OK,A000"]
- - "SSC SSC1 gatts -S -z load -p 0xA1"
- ["R SSC1 C +GATTS:StartService,OK,A001"]
- ID: BTSTK_GATT_20001
<<: *GATT_CASE
test point 2: BLE GATT client service / char discovery
summary: GATT client discover primary service
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do primary service discovery
expected result: |
1. succeed
2. succeed
3. succeed
4. found service 0xA000 and 0xA001
initial condition: BLE_INIT2
cmd set:
- ""
- *included_service_connection
- - "SSC SSC1 gattc -D -z primaryService -p 0x10"
- ["R SSC1 C +GATTC:DiscoverService,A000 C +GATTC:DiscoverService,A001"]
- ID: BTSTK_GATT_20002
<<: *GATT_CASE
test point 2: BLE GATT client service / char discovery
summary: GATT client get included service
allow fail: 1/2
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do primary service discovery
5. DUT1 get included service 0xA000 from service 0xA001
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. get included service 0xA000 from service 0xA001
initial condition: BLE_INIT2
cmd set:
- ""
- *included_service_connection
- - "SSC SSC1 gattc -D -z primaryService -p 0x10"
- ["R SSC1 C +GATTC:DiscoverService,A000 A <handle_range>:GATTC:DiscoverService,A001,(\\d+-\\d+)"]
- - "SSC SSC1 gattc -D -z includedService -p 0x10 -s 0xA001 -i 0xA000 -q <handle_range> -k 1"
- ["R SSC1 C +GATTC:IncludedService,0010,A001,A000"]
- ID: BTSTK_GATT_60001
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set char value and value length longer than max length
allow fail: 1/2
steps: |
1. DUT2 create service
2. DUT2 set value length
expected result: |
1. succeed
2. failed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z set -l 3"
- ["R SSC2 C +GATTS:SetAttrVal,ERROR"]
- ID: BTSTK_GATT_60002
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server get short char value and long char value
allow fail: 1/2
steps: |
1. DUT2 create service
2. DUT2 get short char
3. DUT2 get long char
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x01"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,256"]
- ID: BTSTK_GATT_60003
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set char value and get value
steps: |
1. DUT2 create service
2. DUT2 set short char value
3. DUT2 get value
4. DUT2 set long char value
5. DUT2 get value
6. DUT2 set long char value
7. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
7. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x02"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -v 0x010203040506"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,6,0x010203040506"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -v 123456"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,6,0x313233343536"]
- ID: BTSTK_GATT_60004
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set special char value and get value
steps: |
1. DUT2 create service
2. DUT2 set char value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -v JKLJGFD*^"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,9,0x4A4B4C4A4746442A5E"]
- ID: BTSTK_GATT_60005
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set char value length=0 and get value
steps: |
1. DUT2 create service
2. DUT2 set char value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z set -l 0"
- ["R SSC2 C +GATTS:SetAttrVal,ERROR"]
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x01"]
- ID: BTSTK_GATT_60006
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server only set char value length and get value
steps: |
1. DUT2 create service
2. DUT2 set char value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -l 5"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,5"]
- ID: BTSTK_GATT_60007
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: gattc write char value and gatts get
steps: |
1. DUT1 do service discovery
2. DUT1 write short char
3. DUT2 get value
4. DUT1 write longchar
5. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C302", "R SSC1 C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC2 gatts -V -c 0xC302 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x01"]
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC304 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:Write,OK,0010,A002,C304"]
- - "SSC SSC2 gatts -V -c 0xC304 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,256"]
- ID: BTSTK_GATT_60008
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: gatts set char value and gattc read
steps: |
1. DUT1 do service discovery
2. DUT2 set short char value
3. DUT1 read
4. DUT2 set long char value
5. DUT1 read
6. DUT2 set long char length
7. DU1 read
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC2 gatts -V -c 0xC300 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,1", "R SSC1 C +GATTC:Read,OK,0010,A002,C300"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,1", "R SSC1 C +GATTC:Read,OK,0010,A002,C301"]
- - "SSC SSC2 gatts -V -c 0xC301 -p 0xA2 -z set -l 5"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,5", "R SSC1 C +GATTC:Read,OK,0010,A002,C301"]
- ID: BTSTK_GATT_60009
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set descriptor value and value length longer than max length
steps: |
1. DUT2 create service
2. DUT2 set descriptor value length
expected result: |
1. succeed
2. failed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z set -l 3"
- ["R SSC2 C +GATTS:SetAttrVal,ERROR"]
- ID: BTSTK_GATT_60010
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server get short descriptor value
steps: |
1. DUT2 create service
2. DUT2 get short char
expected result: |
1. succeed
2. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x00"]
- ID: BTSTK_GATT_60011
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set descriptor value and get value
steps: |
1. DUT2 create service
2. DUT2 set descriptor value
3. DUT2 get value
4. DUT2 set descriptor value
5. DUT2 get value
6. DUT2 set descriptor value
7. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
7. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x02"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -v 0x010203040506"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,6,0x010203040506"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -v 123456"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,6,0x313233343536"]
- ID: BTSTK_GATT_60012
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set special descriptor value and get value
steps: |
1. DUT2 create service
2. DUT2 set descriptor value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -v JKLJGFD*^"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,9,0x4A4B4C4A4746442A5E"]
- ID: BTSTK_GATT_60013
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server set descriptor value length=0 and get value
steps: |
1. DUT2 create service
2. DUT2 set descriptor value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z set -l 0"
- ["R SSC2 C +GATTS:SetAttrVal,ERROR"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x00"]
- ID: BTSTK_GATT_60014
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: GATT server only set descriptor value length and get value
steps: |
1. DUT2 create service
2. DUT2 set char value
3. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA2"
- ["R SSC2 C +GATTS:StartService,OK,A002"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -l 5"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,5"]
- ID: BTSTK_GATT_60015
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: gattc write descriptor value and gatts get
steps: |
1. DUT1 do service discovery
2. DUT1 write short descriptor
3. DUT2 get value
4. DUT1 write long descriptor
5. DUT2 get value
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC300 -d 0x2901 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C300,2901", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C300,2901"]
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,1,0x01"]
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C301,2901"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z get"
- ["R SSC2 C +GATTS:GetAttrValue,256"]
- ID: BTSTK_GATT_60016
<<: *GATT_CASE
test point 2: BLE GATT server get and set value
summary: gatts set value and gattc read
steps: |
1. DUT1 do service discovery
2. DUT2 set short descriptor value
3. DUT1 read
4. DUT2 set long descriptor value
5. DUT1 read
6. DUT2 set long descriptor length
7. DU1 read
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC2 gatts -V -c 0xC300 -d 0x2901 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC300 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,2901,1", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C300,2901"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -v 0x02"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,2901,1", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C301,2901"]
- - "SSC SSC2 gatts -V -c 0xC301 -d 0x2901 -p 0xA2 -z set -l 5"
- ["R SSC2 C +GATTS:SetAttrVal,OK"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,2901,5", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C301,2901"]
- ID: BTSTK_GATT_21001
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read short char
steps: |
1. DUT1 do discover
2. GATT client read 1 byte short char
expected result: |
1. succeed
2. read succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC100 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,1", "R SSC1 C +GATTC:Read,OK,0010,A000,C100"]
- ID: BTSTK_GATT_21002
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read long char
steps: |
1. DUT1 do service discovery
2. DUT1 GATT client read 256 bytes long char
expected result: |
1. succeed
2. read succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC101 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C101,256", "R SSC1 C +GATTC:Read,OK,0010,A000,C101"]
- ID: BTSTK_GATT_21003
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read short descriptor
steps: |
1. DUT1 do service discovery
2. GATT client read short descriptor
expected result: |
1. succeed
2. read succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C107,2902,2", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A000,C107,2902"]
- ID: BTSTK_GATT_21004
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read long descriptor
steps: |
1. DUT1 do service discovery
2. GATT client read long descriptor
expected result: |
1. succeed
2. read succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC100 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,2901,2", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A000,C100,2901"]
- ID: BTSTK_GATT_21005
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read short char of an included service
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do discover
5. GATT client read 1 byte short char
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA1"
- ["R SSC2 C +GATTS:StartService,OK,A001"]
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ["R SSC1 C +BLE:GattcConnect,OK,0010", "R SSC2 C +BLE:GattsConnect"]
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- ['R SSC1 C +GATTC:OK']
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC100 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,1", "R SSC1 C +GATTC:Read,OK,0010,A000,C100"]
- ID: BTSTK_GATT_21006
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read short descriptor or an included service
allow fail: 1/2
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do discover
5. GATT client read 1 byte short descriptor
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA1"
- ["R SSC2 C +GATTS:StartService,OK,A001"]
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ["R SSC1 C +BLE:GattcConnect,OK,0010", "R SSC2 C +BLE:GattsConnect"]
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- ['R SSC1 C +GATTC:OK']
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C107,2902,2", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A000,C107,2902"]
- ID: BTSTK_GATT_21007
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read auto reply short char created by table
steps: |
1. DUT1 do discover
2. DUT1 read auto reply short char
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,1", "R SSC1 C +GATTC:Read,OK,0010,A002,C300"]
- ID: BTSTK_GATT_21008
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read auto reply long char created by table
steps: |
1. DUT1 do discover
2. DUT1 read auto reply long char
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,256", "R SSC1 C +GATTC:Read,OK,0010,A002,C301"]
- ID: BTSTK_GATT_21009
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read app reply short char created by table
steps: |
1. DUT1 do discover
2. DUT1 read app reply short char
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC310 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C310,1", "R SSC1 C +GATTC:Read,OK,0010,A002,C310"]
- ID: BTSTK_GATT_21010
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read app reply long char created by table
steps: |
1. DUT1 do discover
2. DUT1 read app reply long char
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC311 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C311,256", "R SSC1 C +GATTC:Read,OK,0010,A002,C311"]
- ID: BTSTK_GATT_21011
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read auto reply short descriptor created by table
steps: |
1. DUT1 do discover
2. DUT1 read auto reply short descriptor
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC300 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,2901,1", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C300,2901"]
- ID: BTSTK_GATT_21012
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read auto reply long descriptor created by table
steps: |
1. DUT1 do discover
2. DUT1 read auto reply long descriptor
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,2901,256", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C301,2901"]
- ID: BTSTK_GATT_21013
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read app reply short descriptor created by table
steps: |
1. DUT1 do discover
2. DUT1 read app reply short descriptor
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC310 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C310,2901,1", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C310,2901"]
- ID: BTSTK_GATT_21014
<<: *GATT_CASE
test point 2: BLE GATT client read char and descriptor
summary: GATT client read app reply long descriptor created by table
steps: |
1. DUT1 do discover
2. DUT1 read app reply long descriptor
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC311 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C311,2901,256", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A002,C311,2901"]
- ID: BTSTK_GATT_22001
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write with response to a short char with response
steps: |
1. DUT1 do service discovery
2. GATT client write with response to short char with response
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC102 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C102", "R SSC1 C +GATTC:Write,OK,0010,A000,C102"]
- ID: BTSTK_GATT_22002
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write without response to a short char without response
steps: |
1. DUT1 do service discovery
2. GATT client write without response to short char without response
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC103 -p 0x10 -v 0x01 -w 1"
- - "P SSC1 C +GATTC:WriteOnce,0010,A000,C103"
- "P SSC2 C +GATTS:Write,OK,A000,C103"
- "P SSC1 C +GATTC:Write,OK,0010,A000,C103"
- ID: BTSTK_GATT_22003
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do execute
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do execute
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA000 -c 0xC110 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:Write,OK,0010,A000,C110"]
- ID: BTSTK_GATT_22004
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do cancel
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do cancel
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA000 -c 0xC110 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:Write,OK,0010,A000,C110"]
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC110 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:Write,OK,0010,A000,C110"]
- ID: BTSTK_GATT_22005
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to a short descriptor
steps: |
1. DUT1 do service discovery
2. GATT client write to short descriptor
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- ID: BTSTK_GATT_22006
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to long descriptor and execute
steps: |
1. DUT1 do service discovery
2. GATT client write to long descriptor and execute
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA000 -c 0xC100 -d 0x2901 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C100,2901"]
- ID: BTSTK_GATT_22007
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to long descriptor using write API
steps: |
1. DUT1 do service discovery
2. GATT client write to long descriptor and execute
expected result: |
1. succeed
2. write succeed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC100 -d 0x2901 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C100,2901"]
- ID: BTSTK_GATT_22008
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to an included char
allow fail: 1/2
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do discover
5. GATT client write with response to short char with response
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA1"
- ["R SSC2 C +GATTS:StartService,OK,A001"]
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ["R SSC1 C +BLE:GattcConnect,OK,0010", "R SSC2 C +BLE:GattsConnect"]
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- ['R SSC1 C +GATTC:OK']
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC102 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C102", "R SSC1 C +GATTC:Write,OK,0010,A000,C102"]
- ID: BTSTK_GATT_22009
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to an included descriptor
steps: |
1. DUT2 create preset service 0xA000
2. DUT2 create preset service 0xA001
3. DUT1 connect to DUT2
4. DUT1 do discover
5. GATT client write to short descriptor
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
initial condition: BLE_INIT2
cmd set:
- ""
- - "SSC SSC2 gatts -S -z load -p 0xA1"
- ["R SSC2 C +GATTS:StartService,OK,A001"]
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ["R SSC1 C +BLE:GattcConnect,OK,0010", "R SSC2 C +BLE:GattsConnect"]
- - SSC SSC1 gattc -F -r <dut2_bt_mac>
- ['R SSC1 C +GATTC:OK']
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- ID: BTSTK_GATT_22010
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write with response to auto reply short char with response created by table
allow fail: 1/2
steps: |
1. DUT1 do service discovery
2. GATT client write with response to auto reply short char with response created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C302", "R SSC1 C +GATTC:Write,OK,0010,A002,C302"]
- ID: BTSTK_GATT_22011
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write without response to auto reply short char without response created by table
steps: |
1. DUT1 do service discovery
2. GATT client write without response to auto reply short char without response created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC303 -p 0x10 -v 0x01 -w 1"
- - "P SSC1 C +GATTC:WriteOnce,0010,A002,C303"
- "P SSC2 C +GATTS:Write,OK,A002,C303"
- "P SSC1 C +GATTC:Write,OK,0010,A002,C303"
- ID: BTSTK_GATT_22012
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do execute to auto reply char created by table
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do execute to auto reply char created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC304 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_22013
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do cancel to auto reply char created by table
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do cancel to auto reply char created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC304 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_22014
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to auto reply short descriptor created by table
steps: |
1. DUT1 do service discovery
2. GATT client write to auto reply short descriptor created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC300 -d 0x2901 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C300,2901", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C300,2901"]
- ID: BTSTK_GATT_22015
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to auto reply long descriptor created by table
steps: |
1. DUT1 do service discovery
2. GATT client write to auto reply long descriptor created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C301,2901"]
- ID: BTSTK_GATT_22016
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to auto reply long descriptor created by table and cancel
steps: |
1. DUT1 do service discovery
2. GATT client write to auto reply long descriptor created by table and cancel
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC301 -d 0x2901 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C301,2901"]
- ID: BTSTK_GATT_22017
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write with response to app reply short char with response created by table
steps: |
1. DUT1 do service discovery
2. GATT client write with response to app reply short char with response created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC312 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C312", "R SSC1 C +GATTC:Write,OK,0010,A002,C312"]
- ID: BTSTK_GATT_22018
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write without response to app reply short char without response created by table
steps: |
1. DUT1 do service discovery
2. GATT client write without response to app reply short char without response created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC313 -p 0x10 -v 0x01 -w 1"
- - "P SSC1 C +GATTC:WriteOnce,0010,A002,C313"
- "P SSC2 C +GATTS:Write,OK,A002,C313"
- "P SSC1 C +GATTC:Write,OK,0010,A002,C313"
- ID: BTSTK_GATT_22019
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do execute to app reply char created by table
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do execute to app reply char created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC314 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:Write,OK,0010,A002,C314"]
- ID: BTSTK_GATT_22020
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client prepare write and do cancel to app reply char created by table
steps: |
1. DUT1 do service discovery
2. GATT client prepare write and do cancel to app reply char created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC314 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:Write,OK,0010,A002,C314"]
- ID: BTSTK_GATT_22021
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to app reply short descriptor created by table
steps: |
1. DUT1 do service discovery
2. GATT client write to app reply short descriptor created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC310 -d 0x2901 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C310,2901", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C310,2901"]
- ID: BTSTK_GATT_22022
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to app reply long descriptor created by table
steps: |
1. DUT1 do service discovery
2. GATT client write to app reply long descriptor created by table
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC311 -d 0x2901 -p 0x10 -l 256"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C311,2901"]
- ID: BTSTK_GATT_22023
<<: *GATT_CASE
test point 2: BLE GATT client write char and descriptor
summary: GATT client write to app reply long descriptor created by table and cancel
steps: |
1. DUT1 do service discovery
2. GATT client write to app reply long descriptor created by table and cancel
expected result: |
1. succeed
2. write succeed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC311 -d 0x2901 -p 0x10 -l 256 -e 0"
- ["P SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C311,2901"]
- ID: BTSTK_GATT_23001
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client register/unregister notify
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on notification char
3. DUT1 register notify on indication char
expected result: |
1. succeed
2. succeed
3. succeed
cmd set:
- ""
- *primary_service_discovery
- *register_notify_c107
- *register_indicate_c108
- - "SSC SSC1 gattc -N -z unregister -s 0xA000 -c 0xC107 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:UnRegNotify,OK,0010,A000,C107"]
- - "SSC SSC1 gattc -N -z unregister -s 0xA000 -c 0xC108 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:UnRegNotify,OK,0010,A000,C108"]
- ID: BTSTK_GATT_23002
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive notify
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on notification char and write to CCC
3. DUT2 do notify
expected result: |
1. succeed
2. succeed
3. DUT1 recv notify
cmd set:
- ""
- *primary_service_discovery
- *register_notify_c107
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- - "SSC SSC2 gatts -N -c 0xC107 -p 0xA0 -v 0x01"
- ["R SSC1 C +GATTC:Notification,0010,A000,C107,1"]
- ID: BTSTK_GATT_23003
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive indication
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on inidcation char and write to CCC
3. DUT2 do indication
expected result: |
1. succeed
2. succeed
3. DUT1 recv indication
cmd set:
- ""
- *primary_service_discovery
- *register_indicate_c108
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC108 -d 0x2902 -p 0x10 -v 0x0002"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C108,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C108,2902"]
- - "SSC SSC2 gatts -I -c 0xC108 -p 0xA0 -v 0x01"
- ["R SSC1 C +GATTC:Indication,0010,A000,C108,1"]
- ID: BTSTK_GATT_23004
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client can't receive notification/indication without write to CCC
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on notify and inidcation char
3. DUT2 do notify and indication
expected result: |
1. succeed
2. succeed
3. DUT1 can recv notify and indication (this is aganist Spec, but a reasonable behavior in bluedroid)
cmd set:
- ""
- *primary_service_discovery
- *register_notify_c107
- *register_indicate_c108
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0000"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- - "SSC SSC2 gatts -N -c 0xC107 -p 0xA0 -v 0x01"
- ["P SSC1 C +GATTC:Notification,0010,A000,C107,1"]
- - "SSC SSC2 gatts -I -c 0xC108 -p 0xA0 -v 0x01"
- ["P SSC1 C +GATTC:Indication,0010,A000,C108,1"]
- ID: BTSTK_GATT_23005
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive notify on auto reply notify char created by table
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on auto reply notification char and write to CCC
3. DUT2 do notify
expected result: |
1. succeed
2. succeed
3. DUT1 recv notify
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C305"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC305 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C305,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C305,2902"]
- - "SSC SSC2 gatts -N -c 0xC305 -p 0xA2 -v 0x01"
- ["R SSC1 C +GATTC:Notification,0010,A002,C305,1"]
- ID: BTSTK_GATT_23006
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive indication on auto reply indication char created by table
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on auto reply inidcation char and write to CCC
3. DUT2 do indication
expected result: |
1. succeed
2. succeed
3. DUT1 recv indication
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C306"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC306 -d 0x2902 -p 0x10 -v 0x0002"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C306,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C306,2902"]
- - "SSC SSC2 gatts -I -c 0xC306 -p 0xA2 -v 0x01"
- ["R SSC1 C +GATTC:Indication,0010,A002,C306,1"]
- ID: BTSTK_GATT_23007
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client can't receive notification/indication without write to CCC
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on notify and inidcation char
3. DUT2 do notify and indication
expected result: |
1. succeed
2. succeed
3. DUT1 can recv notify and indication (this is aganist Spec, but a reasonable behavior in bluedroid)
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C305"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C306"]
- - "SSC SSC2 gatts -N -c 0xC305 -p 0xA2 -v 0x01"
- ["P SSC1 C +GATTC:Notification,0010,A002,C305,1"]
- - "SSC SSC2 gatts -I -c 0xC306 -p 0xA2 -v 0x01"
- ["P SSC1 C +GATTC:Indication,0010,A002,C306,1"]
- ID: BTSTK_GATT_23008
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive notify on app reply notify char created by table
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on app reply notification char and write to CCC
3. DUT2 do notify
expected result: |
1. succeed
2. succeed
3. DUT1 recv notify
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC315 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C315"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC315 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C315,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C315,2902"]
- - "SSC SSC2 gatts -N -c 0xC315 -p 0xA2 -v 0x01"
- ["R SSC1 C +GATTC:Notification,0010,A002,C315,1"]
- ID: BTSTK_GATT_23009
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client receive indication on app reply indication char created by table
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on app reply inidcation char and write to CCC
3. DUT2 do indication
expected result: |
1. succeed
2. succeed
3. DUT1 recv indication
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC316 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C316"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC316 -d 0x2902 -p 0x10 -v 0x0002"
- ["R SSC1 C +GATTC:WriteOnce,0010,A002,C316,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A002,C316,2902"]
- - "SSC SSC2 gatts -I -c 0xC316 -p 0xA2 -v 0x01"
- ["R SSC1 C +GATTC:Indication,0010,A002,C316,1"]
- ID: BTSTK_GATT_23010
<<: *GATT_CASE
test point 2: BLE GATT client receive notify and indication
summary: GATT client can't receive notification/indication without write to CCC
steps: |
1. DUT1 do service discovery
2. DUT1 register notify on notify and inidcation char
3. DUT2 do notify and indication
expected result: |
1. succeed
2. succeed
3. DUT1 can recv notify and indication (this is aganist Spec, but a reasonable behavior in bluedroid)
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC315 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C315"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC316 -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C316"]
- - "SSC SSC2 gatts -N -c 0xC315 -p 0xA2 -v 0x01"
- ["P SSC1 C +GATTC:Notification,0010,A002,C315,1"]
- - "SSC SSC2 gatts -I -c 0xC316 -p 0xA2 -v 0x01"
- ["P SSC1 C +GATTC:Indication,0010,A002,C316,1"]
- ID: BTSTK_GATT_24001
<<: *GATT_CASE
test point 2: BLE GATT client do invalid read
summary: GATT client read to a char without read property
steps: |
1. DUT1 do service discovery
2. DUT1 read to a char without read property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC103 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- ID: BTSTK_GATT_24002
<<: *GATT_CASE
test point 2: BLE GATT client do invalid read
summary: GATT client read to a descriptor without read property
steps: |
1. DUT1 do service discovery
2. DUT1 read to a descriptor without read property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC102 -d 0x2901 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- ID: BTSTK_GATT_24003
<<: *GATT_CASE
test point 2: BLE GATT client do invalid read
summary: GATT client read to a char without read property created by table
steps: |
1. DUT1 do service discovery
2. DUT1 read to auto reply char without read property create by table
3. DUT1 read to app reply char without read property create by table
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC302 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC312 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- ID: BTSTK_GATT_24004
<<: *GATT_CASE
test point 2: BLE GATT client do invalid read
summary: GATT client read to a descriptor without read property created by table
steps: |
1. DUT1 do service discovery
2. DUT1 read to auto reply descriptor without read property created by table
3. DUT1 read to app reply descriptor without read property created by table
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC303 -d 0x2901 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA002 -c 0xC313 -d 0x2901 -p 0x10"
- ["P SSC1 C +GATTC:Read,ERROR"]
- ID: BTSTK_GATT_25001
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write with response to a char without write property
steps: |
1. DUT1 do service discovery
2. DUT1 write with response to a char without write property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC100 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25002
<<: *GATT_CASE
test point 1: basic function
test point 2: BLE GATT client do invalid write
summary: GATT client write without response to a char without write property
steps: |
1. DUT1 do service discovery
2. DUT1 write without response to a char without write property
expected result: |
1. succeed
2. succeed (write without response always succeed)
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC100 -p 0x10 -l 1 -w 1"
- ["R SSC1 C +GATTC:Write,OK"]
- ID: BTSTK_GATT_25003
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write to a descriptor without write property
steps: |
1. DUT1 do service discovery
2. DUT1 write to a descriptor without write property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC101 -d 0x2901 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25004
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client prepare write to a char without write property
steps: |
1. DUT1 do service discovery
2. DUT1 prepare write to a char without write property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA000 -c 0xC100 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25005
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client prepare write to a descriptor without write property
steps: |
1. DUT1 do service discovery
2. DUT1 prepare write to a descriptor without write property
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA000 -c 0xC101 -d 0x2901 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25006
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write with response to a char not send response
steps: |
1. DUT1 do service discovery
2. DUT1 write with response to a char not send response
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC103 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25007
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write without response to a char will send response
steps: |
1. DUT1 do service discovery
2. DUT1 write without response to a char will send response
expected result: |
1. succeed
2. succeed (write without response always succeed)
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC102 -p 0x10 -v 0x01 -w 1"
- ["P SSC1 C +GATTC:WriteOnce"]
- ID: BTSTK_GATT_25008
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write with response to a char without write property created by table
steps: |
1. DUT1 do service discovery
2. DUT1 write with response to auto reply char without write property
3. DUT1 write with response to manual reply char without write property
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC300 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC310 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25009
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write without response to a char created by table without write property
steps: |
1. DUT1 do service discovery
2. DUT1 write without response to auto reply char created by table without write property
3. DUT1 write without response to app reply char created by table without write property
expected result: |
1. succeed
2. succeed (write without response always succeed)
3. succeed (write without response always succeed)
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC300 -p 0x10 -l 1 -w 1"
- ["R SSC1 C +GATTC:Write,OK"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC300 -p 0x10 -l 1 -w 1"
- ["R SSC1 C +GATTC:Write,OK"]
- ID: BTSTK_GATT_25010
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write to a descriptor created by table without write property
steps: |
1. DUT1 do service discovery
2. DUT1 write to auto reply descriptor create by table without write property
3. DUT1 write to app reply descriptor create by table without write property
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC302 -d 0x2901 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA002 -c 0xC312 -d 0x2901 -p 0x10 -l 1"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25011
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client prepare write to a char created by table without write property
steps: |
1. DUT1 do service discovery
2. DUT1 prepare write to auto reply char created by table without write property
3. DUT1 prepare write to app reply char created by table without write property
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC300 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC310 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25012
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client prepare write to a descriptor created by table without write property
steps: |
1. DUT1 do service discovery
2. DUT1 prepare write to auto reply descriptor created by table without write property
3. DUT1 prepare write to app reply descriptor created by table without write property
expected result: |
1. succeed
2. failed
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC302 -d 0x2901 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- - "SSC SSC1 gattc -W -z longDescriptor -s 0xA002 -c 0xC312 -d 0x2901 -p 0x10 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25013
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write with response to a char created by table not send response
steps: |
1. DUT1 do service discovery
2. DUT1 write with response to auto reply char created by table not send response
3. DUT1 write with response to app reply char created by table not send response
expected result: |
1. succeed
2. succeed(BLE Spec do not define the behavior of this case. IDF implementation will return success when GATTC write with response and recv response from remote side)
3. failed
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC303 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:Write,OK,0010,A002,C303"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC313 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25014
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write without response to a char created by table will send response
steps: |
1. DUT1 do service discovery
2. DUT1 write without response to auto reply char created by table will send response
3. DUT1 write without response to app reply char created by table will send response
expected result: |
1. succeed
2. succeed (write without response always succeed)
3. succeed (write without response always succeed)
initial condition: BLE_CONN3
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -p 0x10 -v 0x01 -w 1"
- ["R SSC1 C +GATTC:Write,OK"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -p 0x10 -v 0x01 -w 1"
- ["R SSC1 C +GATTC:Write,OK"]
- ID: BTSTK_GATT_25015
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client use write API write to a char won't reply prepare write event
steps: |
1. DUT1 do service discovery
2. DUT1 use write API write to a char reply NULL for prepare write event
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -p 0x10 -s 0xA000 -c 0xC109 -l 256"
- ["R SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25016
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write long char value length longer than max length
initial condition: BLE_CONN3
steps: |
1. DUT1 do service discovery
2. DUT1 write char value
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z longChar -s 0xA002 -c 0xC304 -p 0x10 -l 260"
- ["P SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_25017
<<: *GATT_CASE
test point 2: BLE GATT client do invalid write
summary: GATT client write short char value length longer than max length
initial condition: BLE_CONN3
steps: |
1. DUT1 do service discovery
2. DUT1 write char value
expected result: |
1. succeed
2. failed
cmd set:
- ""
- *primary_service_discovery
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -l 2"
- ["P SSC1 C +GATTC:Write,ERROR"]
- ID: BTSTK_GATT_26001
<<: *GATT_CASE
test point 2: BLE GATT client set mtu
summary: GATT client config different mtu size
steps: |
1. set mtu size 22
2. set mtu size 23
3. set mtu size 517
4. set mtu size 518
expected result: |
1. failed
2. succeed
3. succeed
4. failed
cmd set:
- ""
- - "SSC SSC1 bleconn -D -p 0x10"
- ["P SSC1 C +BLE:GattcDisconnect,OK", "P SSC2 C +BLE:GattsDisconnect,OK"]
- - "SSC SSC1 gattc -S -m 22 "
- ["R SSC1 C +GATTC:ERROR"]
- - "SSC SSC1 gattc -S -m 23"
- ["R SSC1 C +GATTC:OK"]
- - "SSC SSC1 gattc -S -m 517"
- ["R SSC1 C +GATTC:OK"]
- - "SSC SSC1 gattc -S -m 518"
- ["R SSC1 C +GATTC:ERROR"]
- ID: BTSTK_GATT_26002
<<: *GATT_CASE
test point 2: BLE GATT server set mtu
summary: GATT server config different mtu size
steps: |
1. set mtu size 22
2. set mtu size 23
3. set mtu size 517
4. set mtu size 518
expected result: |
1. failed
2. succeed
3. succeed
4. failed
cmd set:
- ""
- - "SSC SSC1 bleconn -D -p 0x10"
- ["P SSC1 C +BLE:GattcDisconnect,OK", "P SSC2 C +BLE:GattsDisconnect,OK"]
- - "SSC SSC2 gatts -C -m 22"
- ["R SSC2 C +GATTS:ERROR"]
- - "SSC SSC2 gatts -C -m 23"
- ["R SSC2 C +GATTS:OK"]
- - "SSC SSC2 gatts -C -m 517"
- ["R SSC2 C +GATTS:OK"]
- - "SSC SSC2 gatts -C -m 518"
- ["R SSC2 C +GATTS:ERROR"]
- ID: BTSTK_GATT_26003
<<: *GATT_CASE
test point 2: BLE GATT config mtu
summary: GATT client and server config different mtu size
steps: |
1. client set mtu size 365 and server set mtu size 261
2. client config mtu
expected result:
1. succeed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -D -p 0x10"
- ["P SSC1 C +BLE:GattcDisconnect,OK", "P SSC2 C +BLE:GattsDisconnect,OK"]
- - "SSC SSC1 gattc -S -m 365"
- ["R SSC1 C +GATTC:OK"]
- - "SSC SSC2 gatts -C -m 261"
- ["R SSC2 C +GATTS:OK"]
- - "SSC SSC2 bleadv -D -z start"
- ['R SSC2 C +BLEADV:OK']
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLE:GattcConnect,OK', 'R SSC2 C +BLE:GattsConnect']
- - "SSC SSC1 gattc -C"
- ["R SSC1 C +GATTC:OK","P SSC[1-2] C ConfigMTU,OK,261"]
- ID: BTSTK_GATT_26004
<<: *GATT_CASE
test point 2: BLE GATT client config mtu
summary: GATT read write on mtu size 261
allow fail: 1/2
steps: |
1. config mtu size 261
2. do read
3. do write
expected result: |
1. succeed
2. succeed
3. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -D -p 0x10"
- ["P SSC1 C +BLE:GattcDisconnect,OK", "P SSC2 C +BLE:GattsDisconnect,OK"]
- - "SSC SSC1 gattc -S -m 261"
- ["R SSC1 C +GATTC:OK"]
- - "SSC SSC2 gatts -C -m 261"
- ["R SSC2 C +GATTS:OK"]
- - "SSC SSC2 bleadv -D -z start"
- ['R SSC2 C +BLEADV:OK']
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLE:GattcConnect,OK', 'R SSC2 C +BLE:GattsConnect']
- - "SSC SSC1 gattc -C"
- ["R SSC1 C +GATTC:OK","P SSC[1-2] C ConfigMTU,OK,261"]
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C101,256"]
- - "SSC SSC1 gattc -W -z char -p 0x10 -s 0xA000 -c 0xC109 -l 256"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C109"]
- - "SSC SSC1 gattc -W -z longChar -p 0x10 -s 0xA000 -c 0xC110 -l 512"
- ["R SSC1 C +GATTC:Write,OK,0010,A000,C110", "P SSC2 C +GATTS:ReliableWrite,OK"]
- ID: BTSTK_GATT_26005
<<: *GATT_CASE
test point 2: BLE GATT client config mtu
summary: GATT read write on mtu size 517
allow fail: 1/2
steps: |
1. config mtu size 517
2. do read
3. do write
expected result: |
1. succeed
2. succeed
3. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -D -p 0x10"
- ["P SSC1 C +BLE:GattcDisconnect,OK", "P SSC2 C +BLE:GattsDisconnect,OK"]
- - "SSC SSC1 gattc -S -m 517"
- ["R SSC1 C +GATTC:OK"]
- - "SSC SSC2 gatts -C -m 517"
- ["R SSC2 C +GATTS:OK"]
- - "SSC SSC2 bleadv -D -z start"
- ['R SSC2 C +BLEADV:OK']
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLE:GattcConnect,OK', 'R SSC2 C +BLE:GattsConnect']
- - "SSC SSC1 gattc -C"
- ["P SSC1 C +GATTC:OK", "P SSC[1-2] C ConfigMTU,OK,517"]
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -p 0x10 -s 0xA000 -c 0xC101"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C101,256"]
- - "SSC SSC1 gattc -W -z char -p 0x10 -s 0xA000 -c 0xC109 -l 256"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C109"]
- - "SSC SSC1 gattc -W -z char -p 0x10 -s 0xA000 -c 0xC109 -l 512"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C109"]
- ID: BTSTK_GATT_30001
<<: *GATT_CASE
test point 2: BLE GATT multi connection service discovery test
summary: do primary service discovery when DUT1 role is master, connected with 4 slaves
steps: |
1. DUT1 do primary service discovery on DUT[2-5]
expected result: |
1. succeed
initial condition: BLE_CONN5
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 4 1 "[2,3,4,5]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- ID: BTSTK_GATT_30002
<<: *GATT_CASE
test point 2: BLE GATT multi connection service discovery test
summary: do primary service discovery when DUT1 is slave, connected by 4 masters
steps: |
1. DUT[2-5] do primary service discovery
expected result: |
1. succeed
initial condition: BLE_CONN6
test environment: SSC_T5_1
cmd set:
- ""
- - "SSC SSC[2-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Discover,OK"]
- ID: BTSTK_GATT_30003
<<: *GATT_CASE
test point 2: BLE GATT multi connection service discovery test
summary: do primary service discovery when DUT1 connect to DUT[2-3] and connected by DUT[4-5]
steps: |
1. DUT1 do primary service discovery for DUT[2-3]
2. DUT[4-5] do primary service discovery for DUT1
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN7
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 2 1 "[2,3]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC[4-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Discover,OK"]
- ID: BTSTK_GATT_30004
<<: *GATT_CASE
test point 2: BLE GATT multi connection service discovery test
summary: do primary service discovery when master and slave both create GATTC and GATTS
steps: |
1. DUT1 do primary service discovery for DUT2
2. DUT2 do primary service discovery for DUT1
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN4
cmd set:
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut2_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC2 gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC2 C +GATTC:Discover,OK"]
- ID: BTSTK_GATT_31001
<<: *GATT_CASE
test point 2: BLE GATT multi connection read test
summary: do read when DUT1 role is master, connected with 4 slaves
steps: |
1. do primary service discovery
2. do read long and read short
3. loop step 1-2 for all DUTs
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_CONN5
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 4 3 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,1"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,256"]
- ID: BTSTK_GATT_31002
<<: *GATT_CASE
test point 2: BLE GATT multi connection read test
summary: do read when DUT1 is slave, connected by 4 masters
steps: |
1. do primary service discovery on DUT[2-5]
expected result: |
1. succeed
initial condition: BLE_CONN6
test environment: SSC_T5_1
cmd set:
- ""
- - "SSC SSC[2-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Discover,OK"]
- - "SSC SSC[2-5] gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:ReadOnce,0010,A002,C300,1"]
- - "SSC SSC[2-5] gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:ReadOnce,0010,A002,C301,256"]
- ID: BTSTK_GATT_31003
<<: *GATT_CASE
test point 2: BLE GATT multi connection read test
summary: do read when DUT1 connect to DUT[2-3] and connected by DUT[4-5]
steps: |
1. DUT1 do primary service discovery for DUT[2-3]
2. DUT1 do read on DUT[2-3]
3. DUT[4-5] do primary service discovery for DUT1
4. DUT[4-5] do read on DUT1
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: BLE_CONN7
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 2 3 "[2,3]" "[2,3]" "[2,3]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C300,1"]
- - "SSC SSC1 gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:ReadOnce,0010,A002,C301,256"]
- - "SSC SSC[4-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Discover,OK"]
- - "SSC SSC[4-5] gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:ReadOnce,0010,A002,C300,1"]
- - "SSC SSC[4-5] gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:ReadOnce,0010,A002,C301,256"]
- ID: BTSTK_GATT_31004
<<: *GATT_CASE
test point 2: BLE GATT multi connection read test
summary: do read when master and slave both create GATTC and GATTS
steps: |
1. DUT1 do primary service discovery for DUT2
2. DUT2 do primary service discovery for DUT1
3. DUT1 do read on DUT2
4. DUT2 do read on DUT1
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: BLE_CONN4
cmd set:
- ""
- - "SSC SSC[1-2] gattc -D -z primaryService -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Discover,OK"]
- - "SSC SSC[1-2] gattc -R -z char -s 0xA002 -c 0xC300 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:ReadOnce,0010,A002,C300,1"]
- - "SSC SSC[1-2] gattc -R -z char -s 0xA002 -c 0xC301 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:ReadOnce,0010,A002,C301,256"]
- ID: BTSTK_GATT_32001
<<: *GATT_CASE
test point 2: BLE GATT multi connection write test
summary: do write when DUT1 role is master, connected with 4 slaves
steps: |
1. do primary service discovery
2. do write long and write short
3. loop step 1-2 for all DUTs
expected result: |
1. succeed
2. succeed
3. succeed
initial condition: BLE_CONN5
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 4 3 "[2,3,4,5]" "[2,3,4,5]" "[2,3,4,5]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -l 1 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC304 -l 256 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_32002
<<: *GATT_CASE
test point 2: BLE GATT multi connection write test
summary: do read when DUT1 is slave, connected by 4 masters
steps: |
1. do primary service discovery on DUT[2-5]
expected result: |
1. succeed
initial condition: BLE_CONN6
test environment: SSC_T5_1
cmd set:
- ""
- - "SSC SSC[2-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Discover,OK"]
- - "SSC SSC[2-5] gattc -W -z char -s 0xA002 -c 0xC302 -l 1 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC[2-5] gattc -W -z char -s 0xA002 -c 0xC304 -l 256 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_32003
<<: *GATT_CASE
test point 2: BLE GATT multi connection write test
summary: do write when DUT1 connect to DUT[2-3] and connected by DUT[4-5]
steps: |
1. DUT1 do primary service discovery for DUT[2-3]
2. DUT1 do write on DUT[2-3]
3. DUT[4-5] do primary service discovery for DUT1
4. DUT[4-5] do write on DUT1
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: BLE_CONN7
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 2 3 "[2,3]" "[2,3]" "[2,3]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC302 -l 1 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC1 gattc -W -z char -s 0xA002 -c 0xC304 -l 256 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Write,OK,0010,A002,C304"]
- - "SSC SSC[4-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Discover,OK"]
- - "SSC SSC[4-5] gattc -W -z char -s 0xA002 -c 0xC302 -l 1 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC[4-5] gattc -W -z char -s 0xA002 -c 0xC304 -l 256 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_32004
<<: *GATT_CASE
test point 2: BLE GATT multi connection write test
summary: do read when master and slave both create GATTC and GATTS
steps: |
1. DUT1 do primary service discovery for DUT2
2. DUT2 do primary service discovery for DUT1
3. DUT1 do write on DUT2
4. DUT2 do write on DUT1
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
initial condition: BLE_CONN4
cmd set:
- ""
- - "SSC SSC[1-2] gattc -D -z primaryService -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Discover,OK"]
- - "SSC SSC[1-2] -W -z char -s 0xA002 -c 0xC302 -l 1 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Write,OK,0010,A002,C302"]
- - "SSC SSC[1-2] -W -z char -s 0xA002 -c 0xC304 -l 256 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Write,OK,0010,A002,C304"]
- ID: BTSTK_GATT_33001
<<: *GATT_CASE
test point 2: BLE GATT multi connection notify test
summary: do notify when DUT1 role is master, connected with 4 slaves
steps: |
1. do primary service discovery
2. do register nofity for char
3. do notify on DUT[2-5]
expected result: |
1. succeed
2. succeed
3. DUT1 receive notification on DUT[2-5]
initial condition: BLE_CONN5
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 4 2 "[2,3,4,5]" "[2,3,4,5]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C305"]
- - "SSC SSC[2-5] gatts -N -c 0xC305 -l 1 -p 0xA2 -r <dut1_bt_mac>"
- ['P SSC1 RE "\+GATTC:Notification,0010,A002,C305,1,%%s"%%(<dut[2-5]_bt_mac>)']
- ID: BTSTK_GATT_33002
<<: *GATT_CASE
test point 2: BLE GATT multi connection notify test
summary: do notify when DUT1 is slave, connected by 4 masters
steps: |
1. do primary service discovery on DUT[2-5]
2. DUT[2-5] do register notify
3. DUT1 do notify to DUT[2-5]
expected result: |
1. succeed
2. succeed
3. DUT[2-5] receive notification
initial condition: BLE_CONN6
test environment: SSC_T5_1
cmd set:
- ""
- - "SSC SSC[2-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Discover,OK"]
- - "SSC SSC[2-5] gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:RegNotify,OK,0010,A002,C305"]
- - LOOP 4 1 "[2,3,4,5]" "[2,3,4,5]"
- ['']
- - "SSC SSC1 gatts -N -c 0xC305 -l 1 -p 0xA2 -r <dut{%d}_bt_mac>"
- ['P SSC{%d} RE "\+GATTC:Notification,0010,A002,C305,1,%%s"%%(<dut1_bt_mac>)']
- ID: BTSTK_GATT_33003
<<: *GATT_CASE
test point 2: BLE GATT multi connection notify test
summary: do notify when DUT1 connect to DUT[2-3] and connected by DUT[4-5]
steps: |
1. DUT1 do primary service discovery for DUT[2-3]
2. DUT1 register notify
3. DUT[2-3] send notify to DUT1
4. DUT[4-5] do primary service discovery for DUT1
5. DUT[4-5] register notify
6. DUT1 send notofy to DUT[4-5]
expected result: |
1. succeed
2. succeed
3. DUT1 receive notify from DUT[2-3]
4. succeed
5. succeed
6. DUT[4-5] receive notify
initial condition: BLE_CONN7
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 2 2 "[2,3]" "[2,3]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C305"]
- - "SSC SSC[2-3] gatts -N -c 0xC305 -l 1 -p 0xA2 -r <dut1_bt_mac>"
- ['P SSC1 RE "\+GATTC:Notification,0010,A002,C305,1,%%s"%%(<dut[2-3]_bt_mac>)']
- - "SSC SSC[4-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Discover,OK"]
- - "SSC SSC[4-5] gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:RegNotify,OK,0010,A002,C305"]
- - LOOP 2 1 "[4,5]" "[4,5]"
- ['']
- - "SSC SSC1 gatts -N -c 0xC305 -l 1 -p 0xA2 -r <dut{%d}_bt_mac>"
- ['P SSC{%d} RE "\+GATTC:Notification,0010,A002,C305,1,%%s"%%(<dut1_bt_mac>)']
- ID: BTSTK_GATT_33004
<<: *GATT_CASE
test point 2: BLE GATT multi connection notify test
summary: do read when master and slave both create GATTC and GATTS
steps: |
1. DUT1 do primary service discovery for DUT2
2. DUT2 do primary service discovery for DUT1
3. DUT[1-2] do register notify
4. DUT1 and DUT2 send notify to each other
expected result: |
1. succeed
2. succeed
3. succeed
4. receive notification
initial condition: BLE_CONN4
cmd set:
- ""
- - "SSC SSC[1-2] gattc -D -z primaryService -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Discover,OK"]
- - "SSC SSC[1-2] gattc -N -z register -s 0xA002 -c 0xC305 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:RegNotify,OK,0010,A002,C305"]
- - "SSC SSC[1-2] gatts -N -c 0xC305 -l 1 -p 0xA2 -r <dut[2-1]_bt_mac>"
- ['P SSC[1,2] RE "\+GATTC:Notification,0010,A002,C305,1,%%s"%%(<dut[2,1]_bt_mac>)']
- ID: BTSTK_GATT_34001
<<: *GATT_CASE
test point 2: BLE GATT multi connection indicate test
summary: do notify when DUT1 role is master, connected with 4 slaves
steps: |
1. do primary service discovery
2. do register indication for char
3. do indicate on DUT[2-5]
expected result: |
1. succeed
2. succeed
3. DUT1 receive indication on DUT[2-5]
initial condition: BLE_CONN5
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 4 2 "[2,3,4,5]" "[2,3,4,5]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C306"]
- - "SSC SSC[2-5] gatts -I -c 0xC306 -l 1 -p 0xA2 -r <dut1_bt_mac>"
- ['P SSC1 RE "\+GATTC:Indication,0010,A002,C306,1,%%s"%%(<dut[2-5]_bt_mac>)']
- ID: BTSTK_GATT_34002
<<: *GATT_CASE
test point 2: BLE GATT multi connection indicate test
summary: do notify when DUT1 is slave, connected by 4 masters
steps: |
1. do primary service discovery on DUT[2-5]
2. DUT[2-5] do register indication
3. DUT1 do indicate to DUT[2-5]
expected result: |
1. succeed
2. succeed
3. DUT[2-5] receive indication
initial condition: BLE_CONN6
test environment: SSC_T5_1
cmd set:
- ""
- - "SSC SSC[2-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:Discover,OK"]
- - "SSC SSC[2-5] gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[2-5] C +GATTC:RegNotify,OK,0010,A002,C306"]
- - LOOP 4 1 "[2,3,4,5]" "[2,3,4,5]"
- ['']
- - "SSC SSC1 gatts -I -c 0xC306 -l 1 -p 0xA2 -r <dut{%d}_bt_mac>"
- ['P SSC{%d} RE "\+GATTC:Indication,0010,A002,C306,1,%%s"%%(<dut1_bt_mac>)']
- ID: BTSTK_GATT_34003
<<: *GATT_CASE
test point 2: BLE GATT multi connection indicate test
summary: do notify when DUT1 connect to DUT[2-3] and connected by DUT[4-5]
steps: |
1. DUT1 do primary service discovery for DUT[2-3]
2. DUT1 register indication
3. DUT[2-3] send indicate to DUT1
4. DUT[4-5] do primary service discovery for DUT1
5. DUT[4-5] register indication
6. DUT1 send indicate to DUT[4-5]
expected result: |
1. succeed
2. succeed
3. DUT1 receive indication from DUT[2-3]
4. succeed
5. succeed
6. DUT[4-5] receive indication
initial condition: BLE_CONN7
test environment: SSC_T5_1
cmd set:
- ""
- - LOOP 2 2 "[2,3]" "[2,3]"
- ""
- - "SSC SSC1 gattc -D -z primaryService -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:Discover,OK"]
- - "SSC SSC1 gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut{%d}_bt_mac>"
- ["R SSC1 C +GATTC:RegNotify,OK,0010,A002,C306"]
- - "SSC SSC[2-3] gatts -I -c 0xC306 -l 1 -p 0xA2 -r <dut1_bt_mac>"
- ['P SSC1 RE "\+GATTC:Indication,0010,A002,C306,1,%%s"%%(<dut[2-3]_bt_mac>)']
- - "SSC SSC[4-5] gattc -D -z primaryService -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:Discover,OK"]
- - "SSC SSC[4-5] gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut1_bt_mac>"
- ["R SSC[4-5] C +GATTC:RegNotify,OK,0010,A002,C306"]
- - LOOP 2 1 "[4,5]" "[4,5]"
- ['']
- - "SSC SSC1 gatts -I -c 0xC306 -l 1 -p 0xA2 -r <dut{%d}_bt_mac>"
- ['P SSC{%d} RE "\+GATTC:Indication,0010,A002,C306,1,%%s"%%(<dut1_bt_mac>)']
- ID: BTSTK_GATT_34004
<<: *GATT_CASE
test point 2: BLE GATT multi connection indicate test
summary: do read when master and slave both create GATTC and GATTS
steps: |
1. DUT1 do primary service discovery for DUT2
2. DUT2 do primary service discovery for DUT1
3. DUT[1-2] do register indication
4. DUT1 and DUT2 send notify to each other
expected result: |
1. succeed
2. succeed
3. succeed
4. receive indication
initial condition: BLE_CONN4
cmd set:
- ""
- - "SSC SSC[1-2] gattc -D -z primaryService -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:Discover,OK"]
- - "SSC SSC[1-2] gattc -N -z register -s 0xA002 -c 0xC306 -p 0x10 -r <dut[2-1]_bt_mac>"
- ["R SSC[1-2] C +GATTC:RegNotify,OK,0010,A002,C306"]
- - "SSC SSC[1-2] gatts -I -c 0xC306 -l 1 -p 0xA2 -r <dut[2-1]_bt_mac>"
- ['P SSC[1,2] RE "\+GATTC:Indication,0010,A002,C306,1,%%s"%%(<dut[2,1]_bt_mac>)']
- ID: BTSTK_GATT_40001
<<: *GATT_CASE
auto test: 'No'
test point 2: test if BLE work after switch off some sub modules
summary: GATTC only and GATTS only test
steps: |
1. download GATTC only bin to DUT1 and GATTS only bin to DUT2
2. DUT2 start adv, enable service 0xA000, DUT1 connect to DUT2
3. DUT1 connect to DUT2
4. DUT1 do primary service discovery
5. DUT1 do read
6. DUT1 do read descriptor
7. DUT1 do write
8. DUT1 do write descriptor
9. DUT1 register for notify and indication
10. DUT2 do notify
11. DUT2 do indicate
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
7. succeed
8. succeed
9. succeed
10. succeed
11. succeed
initial condition: None
execution time: 5
CI ready: 'No'
cmd set:
- ""
- - SSC SSC[1-2] reboot
- ['R SSC[1-2] C !!!ready!!!']
- - SSC SSC[1-2] ble -R
- ['R SSC[1-2] C +BLE:OK']
- - SSC SSC2 bleadv -D -z start
- ['R SSC2 C +BLEADV:OK']
- - SSC SSC2 gatts -S -z load -p 0xA0
- ['R SSC2 C +GATTS:StartService,OK,A000']
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- ['R SSC1 C +BLE:GattcConnect,OK', 'R SSC2 C +BLE:GattsConnect']
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC100 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,1", "R SSC1 C +GATTC:Read,OK,0010,A000,C100"]
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC102 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C102", "R SSC1 C +GATTC:Write,OK,0010,A000,C102"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC100 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,2901,256", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A000,C100,2901"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- *register_notify_c107
- *register_indicate_c108
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0300 -n 1"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- - "SSC SSC2 gatts -N -c 0xC107 -p 0xA0 -v 0x01"
- ["P SSC2 C +GATTS:Done,Notify,A000,C107", "P SSC1 C +GATTC:Notification,0010,A000,C107,1"]
- - "SSC SSC2 gatts -I -c 0xC108 -p 0xA0 -v 0x01"
- ["P SSC2 C +GATTS:Done,Indicate,A000,C108", "P SSC1 C +GATTC:Indication,0010,A000,C108,1"]
- ID: BTSTK_GATT_40002
<<: *GATT_CASE
auto test: 'No'
test point 2: test if BLE work after switch off some sub modules
summary: GATTC_SMP only and GATTS_SMP only test
steps: |
1. download GATTC_SMP bin to DUT1 and GATTS_SMP bin to DUT2
2. DUT2 start adv, start service 0xA000, DUT1 connect to DUT2
3. DUT1 connect to DUT2
4. DUT1 do primary service discovery
5. DUT1 do read
6. DUT1 do read descriptor
7. DUT1 do write
8. DUT1 do write descriptor
9. DUT1 register for notify and indication
10. DUT2 do notify
11. DUT2 do indicate
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
7. succeed
8. succeed
9. succeed
10. succeed
11. succeed
initial condition: None
execution time: 5
CI ready: 'No'
cmd set:
- ""
- - SSC SSC[1-2] reboot
- ['R SSC[1-2] C !!!ready!!!']
- - SSC SSC[1-2] ble -R
- ['R SSC[1-2] C +BLE:OK']
- - SSC SSC2 bleadv -D -z start
- ['R SSC2 C +BLEADV:OK']
- - SSC SSC2 gatts -S -z load -p 0xA0
- ['R SSC2 C +GATTS:StartService,OK,A000']
- - SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>
- ['R SSC1 C +BLE:GattcConnect,OK', 'R SSC2 C +BLE:GattsConnect']
- *primary_service_discovery
- - "SSC SSC1 gattc -R -z char -s 0xA000 -c 0xC100 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,1", "R SSC1 C +GATTC:Read,OK,0010,A000,C100"]
- - "SSC SSC1 gattc -W -z char -s 0xA000 -c 0xC102 -p 0x10 -v 0x01"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C102", "R SSC1 C +GATTC:Write,OK,0010,A000,C102"]
- - "SSC SSC1 gattc -R -z descriptor -s 0xA000 -c 0xC100 -d 0x2901 -p 0x10"
- ["R SSC1 C +GATTC:ReadOnce,0010,A000,C100,2901,256", "R SSC1 C +GATTC:ReadDescriptor,OK,0010,A000,C100,2901"]
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0100"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- *register_notify_c107
- *register_indicate_c108
- - "SSC SSC1 gattc -W -z descriptor -s 0xA000 -c 0xC107 -d 0x2902 -p 0x10 -v 0x0300 -n 1"
- ["R SSC1 C +GATTC:WriteOnce,0010,A000,C107,2902", "R SSC1 C +GATTC:WriteDescriptor,OK,0010,A000,C107,2902"]
- - "SSC SSC2 gatts -N -c 0xC107 -p 0xA0 -v 0x01"
- ["P SSC2 C +GATTS:Done,Notify,A000,C107", "P SSC1 C +GATTC:Notification,0010,A000,C107,1"]
- - "SSC SSC2 gatts -I -c 0xC108 -p 0xA0 -v 0x01"
- ["P SSC2 C +GATTS:Done,Indicate,A000,C108", "P SSC1 C +GATTC:Indication,0010,A000,C108,1"]
- ID: BTSTK_GATT_50001
<<: *GATT_CASE
category: Performance
test point 1: performance + stress
test point 2: BLE GATT performance test
summary: GATT read char performance test
initial condition: BLE_CONN3
Test App: SSC_BLE_PERF
steps: |
1. update connection parameter
2. do primary service discovery
3. do read char for some time
expected result: |
1. succeed
2. succeed
3. calculate throughput
execution time: 2
cmd set:
- "BLEStress/BLEGATTPerformance"
- - test_time = 120
- ""
- - mtu = 512
- ""
- - gatt_op = "read"
- ""
- - op_char = "0xC301"
- ""
- ID: BTSTK_GATT_50002
<<: *GATT_CASE
category: Performance
test point 1: performance + stress
test point 2: BLE GATT performance test
summary: GATT write char performance test
initial condition: BLE_CONN3
Test App: SSC_BLE_PERF
steps: |
1. update connection parameter
2. do primary service discovery
3. do write char for some time
expected result: |
1. succeed
2. succeed
3. calculate throughput
execution time: 2
cmd set:
- "BLEStress/BLEGATTPerformance"
- - test_time = 120
- ""
- - mtu = 512
- ""
- - gatt_op = "write"
- ""
- - op_char = "0xC304"
- ""
- - op_len = 490
- ""
- ID: BTSTK_GATT_50003
<<: *GATT_CASE
category: Performance
test point 1: performance + stress
test point 2: BLE GATT performance test
summary: GATT notify performance test
initial condition: BLE_CONN3
Test App: SSC_BLE_PERF
steps: |
1. update connection parameter
2. do primary service discovery
3. do notify for some time
expected result: |
1. succeed
2. succeed
3. calculate throughput
execution time: 2
cmd set:
- "BLEStress/BLEGATTPerformance"
- - test_time = 120
- ""
- - mtu = 512
- ""
- - gatt_op = "notify"
- ""
- - op_char = "0xC305"
- ""
- - op_len = 256
- ""
- ID: BTSTK_GATT_50004
<<: *GATT_CASE
category: Performance
test point 1: performance + stress
test point 2: BLE GATT performance test
summary: GATT indicate performance test
initial condition: BLE_CONN3
Test App: SSC_BLE_PERF
steps: |
1. update connection parameter
2. do primary service discovery
3. do notify for some time
expected result: |
1. succeed
2. succeed
3. calculate throughput
execution time: 2
cmd set:
- "BLEStress/BLEGATTPerformance"
- - test_time = 120
- ""
- - mtu = 512
- ""
- - gatt_op = "indicate"
- ""
- - op_char = "0xC306"
- ""
- - op_len = 256
- ""