esp-idf/components/esp_system/port/soc/esp32c6/system_internal.c
2022-09-26 20:32:13 +08:00

120 lines
4.9 KiB
C

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <string.h>
#include "sdkconfig.h"
#include "esp_system.h"
#include "esp_private/system_internal.h"
#include "esp_attr.h"
#include "esp_log.h"
#include "esp_rom_sys.h"
#include "riscv/rv_utils.h"
#include "esp_rom_uart.h"
#include "soc/gpio_reg.h"
#include "esp_cpu.h"
#include "soc/rtc.h"
#include "soc/rtc_periph.h"
#include "soc/uart_reg.h"
#include "hal/wdt_hal.h"
#include "esp_private/cache_err_int.h"
#include "esp32c6/rom/cache.h"
#include "esp32c6/rom/rtc.h"
#include "soc/pcr_reg.h"
/* "inner" restart function for after RTOS, interrupts & anything else on this
* core are already stopped. Stalls other core, resets hardware,
* triggers restart.
*/
void IRAM_ATTR esp_restart_noos(void)
{
// Disable interrupts
rv_utils_intr_global_disable();
// Enable RTC watchdog for 1 second
wdt_hal_context_t rtc_wdt_ctx;
wdt_hal_init(&rtc_wdt_ctx, WDT_RWDT, 0, false);
uint32_t stage_timeout_ticks = (uint32_t)(1000ULL * rtc_clk_slow_freq_get_hz() / 1000ULL);
wdt_hal_write_protect_disable(&rtc_wdt_ctx);
wdt_hal_config_stage(&rtc_wdt_ctx, WDT_STAGE0, stage_timeout_ticks, WDT_STAGE_ACTION_RESET_SYSTEM);
wdt_hal_config_stage(&rtc_wdt_ctx, WDT_STAGE1, stage_timeout_ticks, WDT_STAGE_ACTION_RESET_RTC);
//Enable flash boot mode so that flash booting after restart is protected by the RTC WDT.
wdt_hal_set_flashboot_en(&rtc_wdt_ctx, true);
wdt_hal_write_protect_enable(&rtc_wdt_ctx);
// C6 is a single core SoC, no need to reset and stall the other CPU
// Disable TG0/TG1 watchdogs
wdt_hal_context_t wdt0_context = {.inst = WDT_MWDT0, .mwdt_dev = &TIMERG0};
wdt_hal_write_protect_disable(&wdt0_context);
wdt_hal_disable(&wdt0_context);
wdt_hal_write_protect_enable(&wdt0_context);
wdt_hal_context_t wdt1_context = {.inst = WDT_MWDT1, .mwdt_dev = &TIMERG1};
wdt_hal_write_protect_disable(&wdt1_context);
wdt_hal_disable(&wdt1_context);
wdt_hal_write_protect_enable(&wdt1_context);
// Flush any data left in UART FIFOs
esp_rom_uart_tx_wait_idle(0);
esp_rom_uart_tx_wait_idle(1);
// Disable cache
Cache_Disable_ICache();
// 2nd stage bootloader reconfigures SPI flash signals.
// Reset them to the defaults expected by ROM.
WRITE_PERI_REG(GPIO_FUNC0_IN_SEL_CFG_REG, 0x30);
// TODO: IDF-5659
// WRITE_PERI_REG(GPIO_FUNC1_IN_SEL_CFG_REG, 0x30);
// WRITE_PERI_REG(GPIO_FUNC2_IN_SEL_CFG_REG, 0x30);
// WRITE_PERI_REG(GPIO_FUNC3_IN_SEL_CFG_REG, 0x30);
// WRITE_PERI_REG(GPIO_FUNC4_IN_SEL_CFG_REG, 0x30);
// WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
// Reset wifi/bluetooth/ethernet/sdio (bb/mac)
// Moved to module internal
// SET_PERI_REG_MASK(SYSTEM_CORE_RST_EN_REG,
// SYSTEM_WIFIBB_RST | SYSTEM_FE_RST | // TODO: IDF-5680 (esp_phy)
// SYSTEM_WIFIMAC_RST | // TODO: IDF-5679 (esp_wifi)
// SYSTEM_SDIO_RST | // SDIO_HINF_HINF_SDIO_RST?
// SYSTEM_EMAC_RST | SYSTEM_MACPWR_RST | // TODO: IDF-5325 (ethernet)
// SYSTEM_BTBB_RST | SYSTEM_BTBB_REG_RST | // TODO: IDF-5727 (bt)
// SYSTEM_RW_BTMAC_RST | SYSTEM_RW_BTLP_RST | SYSTEM_RW_BTMAC_REG_RST | SYSTEM_RW_BTLP_REG_RST);
// REG_WRITE(SYSTEM_CORE_RST_EN_REG, 0);
// Set Peripheral clk rst
SET_PERI_REG_MASK(PCR_TIMERGROUP0_CONF_REG, PCR_TG0_RST_EN);
SET_PERI_REG_MASK(PCR_TIMERGROUP1_CONF_REG, PCR_TG1_RST_EN);
SET_PERI_REG_MASK(PCR_MSPI_CONF_REG, PCR_MSPI_RST_EN);
SET_PERI_REG_MASK(PCR_UART0_CONF_REG, PCR_UART0_RST_EN);
SET_PERI_REG_MASK(PCR_UART1_CONF_REG, PCR_UART1_RST_EN);
SET_PERI_REG_MASK(PCR_SYSTIMER_CONF_REG, PCR_SYSTIMER_RST_EN);
SET_PERI_REG_MASK(PCR_GDMA_CONF_REG, PCR_GDMA_RST_EN);
SET_PERI_REG_MASK(PCR_SDIO_SLAVE_CONF_REG, PCR_SDIO_SLAVE_RST_EN);
SET_PERI_REG_MASK(PCR_MODEM_APB_CONF_REG, PCR_MODEM_RST_EN);
// Clear Peripheral clk rst
CLEAR_PERI_REG_MASK(PCR_TIMERGROUP0_CONF_REG, PCR_TG0_RST_EN);
CLEAR_PERI_REG_MASK(PCR_TIMERGROUP1_CONF_REG, PCR_TG1_RST_EN);
CLEAR_PERI_REG_MASK(PCR_MSPI_CONF_REG, PCR_MSPI_RST_EN);
CLEAR_PERI_REG_MASK(PCR_UART0_CONF_REG, PCR_UART0_RST_EN);
CLEAR_PERI_REG_MASK(PCR_UART1_CONF_REG, PCR_UART1_RST_EN);
CLEAR_PERI_REG_MASK(PCR_SYSTIMER_CONF_REG, PCR_SYSTIMER_RST_EN);
CLEAR_PERI_REG_MASK(PCR_GDMA_CONF_REG, PCR_GDMA_RST_EN);
CLEAR_PERI_REG_MASK(PCR_SDIO_SLAVE_CONF_REG, PCR_SDIO_SLAVE_RST_EN);
CLEAR_PERI_REG_MASK(PCR_MODEM_APB_CONF_REG, PCR_MODEM_RST_EN);
// Set CPU back to XTAL source, no PLL, same as hard reset
#if !CONFIG_IDF_ENV_FPGA
rtc_clk_cpu_freq_set_xtal();
#endif
// Reset PRO CPU
esp_rom_software_reset_cpu(0);
while (true) {
;
}
}