esp-idf/examples/peripherals/usb
2021-12-09 10:28:46 +01:00
..
host/cdc usb: Add USB host CDC-ACM class driver 2021-12-09 10:28:46 +01:00
tusb_console tiny_usb: rename Kconfig name 2021-07-22 10:43:10 +08:00
tusb_sample_descriptor docs: fix broken link in usb example readme 2021-07-28 12:44:40 +08:00
tusb_serial_device tiny_usb: rename Kconfig name 2021-07-22 10:43:10 +08:00
README.md tiny_usb: rename Kconfig name 2021-07-22 10:43:10 +08:00

USB-OTG Examples

See the README.md file in the upper level examples directory for more information about examples.

Common Pin Assignments

Pin assignment is only needed for ESP chips that have an USB-OTG peripheral. If your board doesn't have a USB connector connected to the USB-OTG dedicated GPIOs, you may have to DIY a cable and connect D+ and D- to the pins listed below.

ESP BOARD          USB CONNECTOR (type A)
                          --
                         | || VCC
[USBPHY_DM_NUM]  ------> | || D-
[USBPHY_DP_NUM]  ------> | || D+
                         | || GND
                          --

Refer to soc/usb_pins.h to find the real GPIO number of USBPHY_DP_NUM and USBPHY_DM_NUM.

USB_DP USB_DM
ESP32-S2/S3 GPIO20 GPIO19