alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
1c6b0bf925
esp-idf/components/driver/test/test_spi_master.c

1363 lines
52 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
Tests for the spi_master device driver
*/
#include <esp_types.h>
#include <stdio.h>
#include <stdlib.h>
#include <malloc.h>
#include <string.h>
#include "rom/ets_sys.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "freertos/queue.h"
#include "freertos/xtensa_api.h"
#include "unity.h"
#include "driver/spi_master.h"
#include "driver/spi_slave.h"
#include "soc/dport_reg.h"
#include "esp_heap_caps.h"
#include "esp_log.h"
#include "soc/spi_periph.h"
#include "freertos/ringbuf.h"
#include "soc/gpio_periph.h"
const static char TAG[] = "test_spi";
#define SPI_BUS_TEST_DEFAULT_CONFIG() {\
.miso_io_num=PIN_NUM_MISO, \
.mosi_io_num=PIN_NUM_MOSI,\
.sclk_io_num=PIN_NUM_CLK,\
.quadwp_io_num=-1,\
.quadhd_io_num=-1\
}
#define SPI_DEVICE_TEST_DEFAULT_CONFIG() {\
.clock_speed_hz=10*1000*1000,\
.mode=0,\
.spics_io_num=PIN_NUM_CS,\
.queue_size=16,\
.pre_cb=NULL, \
.cs_ena_pretrans = 0,\
.cs_ena_posttrans = 0,\
.input_delay_ns = 62.5,\
}
#define FUNC_SPI 1
#define FUNC_GPIO 2
void gpio_output_sel(uint32_t gpio_num, int func, uint32_t signal_idx)
{
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
GPIO.func_out_sel_cfg[gpio_num].func_sel=signal_idx;
}
static void check_spi_pre_n_for(int clk, int pre, int n)
{
esp_err_t ret;
spi_device_handle_t handle;
spi_device_interface_config_t devcfg={
.command_bits=0,
.address_bits=0,
.dummy_bits=0,
.clock_speed_hz=clk,
.duty_cycle_pos=128,
.mode=0,
.spics_io_num=21,
.queue_size=3
};
char sendbuf[16]="";
spi_transaction_t t;
memset(&t, 0, sizeof(t));
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &handle);
TEST_ASSERT(ret==ESP_OK);
t.length=16*8;
t.tx_buffer=sendbuf;
ret=spi_device_transmit(handle, &t);
printf("Checking clk rate %dHz. expect pre %d n %d, got pre %d n %d\n", clk, pre, n, SPI2.clock.clkdiv_pre+1, SPI2.clock.clkcnt_n+1);
TEST_ASSERT(SPI2.clock.clkcnt_n+1==n);
TEST_ASSERT(SPI2.clock.clkdiv_pre+1==pre);
ret=spi_bus_remove_device(handle);
TEST_ASSERT(ret==ESP_OK);
}
TEST_CASE("SPI Master clockdiv calculation routines", "[spi]")
{
spi_bus_config_t buscfg={
.mosi_io_num=4,
.miso_io_num=26,
.sclk_io_num=25,
.quadwp_io_num=-1,
.quadhd_io_num=-1
};
esp_err_t ret;
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
TEST_ASSERT(ret==ESP_OK);
check_spi_pre_n_for(26000000, 1, 3);
check_spi_pre_n_for(20000000, 1, 4);
check_spi_pre_n_for(8000000, 1, 10);
check_spi_pre_n_for(800000, 2, 50);
check_spi_pre_n_for(100000, 16, 50);
check_spi_pre_n_for(333333, 4, 60);
check_spi_pre_n_for(900000, 2, 44);
check_spi_pre_n_for(1, 8192, 64); //Actually should generate the minimum clock speed, 152Hz
check_spi_pre_n_for(26000000, 1, 3);
ret=spi_bus_free(HSPI_HOST);
TEST_ASSERT(ret==ESP_OK);
}
static spi_device_handle_t setup_spi_bus(int clkspeed, bool dma) {
spi_bus_config_t buscfg={
.mosi_io_num=4,
.miso_io_num=26,
.sclk_io_num=25,
.quadwp_io_num=-1,
.quadhd_io_num=-1,
.max_transfer_sz=4096*3
};
spi_device_interface_config_t devcfg={
.command_bits=0,
.address_bits=0,
.dummy_bits=0,
.clock_speed_hz=clkspeed,
.duty_cycle_pos=128,
.mode=0,
.spics_io_num=21,
.queue_size=3,
};
esp_err_t ret;
spi_device_handle_t handle;
printf("THIS TEST NEEDS A JUMPER BETWEEN IO4 AND IO26\n");
ret=spi_bus_initialize(HSPI_HOST, &buscfg, dma?1:0);
TEST_ASSERT(ret==ESP_OK);
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &handle);
TEST_ASSERT(ret==ESP_OK);
printf("Bus/dev inited.\n");
return handle;
}
static void spi_test(spi_device_handle_t handle, int num_bytes) {
esp_err_t ret;
int x;
srand(num_bytes);
char *sendbuf=heap_caps_malloc(num_bytes, MALLOC_CAP_DMA);
char *recvbuf=heap_caps_malloc(num_bytes, MALLOC_CAP_DMA);
for (x=0; x<num_bytes; x++) {
sendbuf[x]=rand()&0xff;
recvbuf[x]=0x55;
}
spi_transaction_t t;
memset(&t, 0, sizeof(t));
t.length=num_bytes*8;
t.tx_buffer=sendbuf;
t.rx_buffer=recvbuf;
t.addr=0xA00000000000000FL;
t.cmd=0x55;
printf("Transmitting %d bytes...\n", num_bytes);
ret=spi_device_transmit(handle, &t);
TEST_ASSERT(ret==ESP_OK);
srand(num_bytes);
for (x=0; x<num_bytes; x++) {
if (sendbuf[x]!=(rand()&0xff)) {
printf("Huh? Sendbuf corrupted at byte %d\n", x);
TEST_ASSERT(0);
}
if (sendbuf[x]!=recvbuf[x]) break;
}
if (x!=num_bytes) {
int from=x-16;
if (from<0) from=0;
printf("Error at %d! Sent vs recved: (starting from %d)\n" , x, from);
for (int i=0; i<32; i++) {
if (i+from<num_bytes) printf("%02X ", sendbuf[from+i]);
}
printf("\n");
for (int i=0; i<32; i++) {
if (i+from<num_bytes) printf("%02X ", recvbuf[from+i]);
}
printf("\n");
// TEST_ASSERT(0);
}
printf("Success!\n");
free(sendbuf);
free(recvbuf);
}
static void destroy_spi_bus(spi_device_handle_t handle) {
esp_err_t ret;
ret=spi_bus_remove_device(handle);
TEST_ASSERT(ret==ESP_OK);
ret=spi_bus_free(HSPI_HOST);
TEST_ASSERT(ret==ESP_OK);
}
#define TEST_LEN 111
TEST_CASE("SPI Master test", "[spi][ignore]")
{
printf("Testing bus at 80KHz\n");
spi_device_handle_t handle=setup_spi_bus(80000, true);
spi_test(handle, 16); //small
spi_test(handle, 21); //small, unaligned
spi_test(handle, 36); //aligned
spi_test(handle, 128); //aligned
spi_test(handle, 129); //unaligned
spi_test(handle, 4096-2); //multiple descs, edge case 1
spi_test(handle, 4096-1); //multiple descs, edge case 2
spi_test(handle, 4096*3); //multiple descs
destroy_spi_bus(handle);
printf("Testing bus at 80KHz, non-DMA\n");
handle=setup_spi_bus(80000, false);
spi_test(handle, 4); //aligned
spi_test(handle, 16); //small
spi_test(handle, 21); //small, unaligned
destroy_spi_bus(handle);
printf("Testing bus at 26MHz\n");
handle=setup_spi_bus(20000000, true);
spi_test(handle, 128); //DMA, aligned
spi_test(handle, 4096*3); //DMA, multiple descs
destroy_spi_bus(handle);
printf("Testing bus at 900KHz\n");
handle=setup_spi_bus(9000000, true);
spi_test(handle, 128); //DMA, aligned
spi_test(handle, 4096*3); //DMA, multiple descs
destroy_spi_bus(handle);
}
TEST_CASE("SPI Master test, interaction of multiple devs", "[spi][ignore]") {
esp_err_t ret;
spi_device_interface_config_t devcfg={
.command_bits=0,
.address_bits=0,
.dummy_bits=0,
.clock_speed_hz=1000000,
.duty_cycle_pos=128,
.mode=0,
.spics_io_num=23,
.queue_size=3,
};
spi_device_handle_t handle1=setup_spi_bus(80000, true);
spi_device_handle_t handle2;
spi_bus_add_device(HSPI_HOST, &devcfg, &handle2);
printf("Sending to dev 1\n");
spi_test(handle1, 7);
printf("Sending to dev 1\n");
spi_test(handle1, 15);
printf("Sending to dev 2\n");
spi_test(handle2, 15);
printf("Sending to dev 1\n");
spi_test(handle1, 32);
printf("Sending to dev 2\n");
spi_test(handle2, 32);
printf("Sending to dev 1\n");
spi_test(handle1, 63);
printf("Sending to dev 2\n");
spi_test(handle2, 63);
printf("Sending to dev 1\n");
spi_test(handle1, 5000);
printf("Sending to dev 2\n");
spi_test(handle2, 5000);
ret=spi_bus_remove_device(handle2);
TEST_ASSERT(ret==ESP_OK);
destroy_spi_bus(handle1);
}
TEST_CASE("spi bus setting with different pin configs", "[spi]")
{
spi_bus_config_t cfg;
uint32_t flags_o;
uint32_t flags_expected;
ESP_LOGI(TAG, "test 6 iomux output pins...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_NATIVE_PINS | SPICOMMON_BUSFLAG_QUAD;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test 4 iomux output pins...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_NATIVE_PINS | SPICOMMON_BUSFLAG_DUAL;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test 6 output pins...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_QUAD;
//swap MOSI and MISO
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test 4 output pins...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_DUAL;
//swap MOSI and MISO
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test master 5 output pins and MOSI on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_WPHD;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test slave 5 output pins and MISO on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO | SPICOMMON_BUSFLAG_WPHD;
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test master 3 output pins and MOSI on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "test slave 3 output pins and MISO on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_SCLK | SPICOMMON_BUSFLAG_MOSI | SPICOMMON_BUSFLAG_MISO;
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ESP_OK(spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
TEST_ASSERT_EQUAL_HEX32( flags_expected, flags_o );
ESP_LOGI(TAG, "check native flag for 6 output pins...");
flags_expected = SPICOMMON_BUSFLAG_NATIVE_PINS;
//swap MOSI and MISO
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check native flag for 4 output pins...");
flags_expected = SPICOMMON_BUSFLAG_NATIVE_PINS;
//swap MOSI and MISO
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MISO, .miso_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check dual flag for master 5 output pins and MISO/MOSI on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_DUAL;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check dual flag for master 3 output pins and MISO/MOSI on input-only pin...");
flags_expected = SPICOMMON_BUSFLAG_DUAL;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = 34, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
cfg = (spi_bus_config_t){.mosi_io_num = 34, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check sclk flag...");
flags_expected = SPICOMMON_BUSFLAG_SCLK;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = -1, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check mosi flag...");
flags_expected = SPICOMMON_BUSFLAG_MOSI;
cfg = (spi_bus_config_t){.mosi_io_num = -1, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check miso flag...");
flags_expected = SPICOMMON_BUSFLAG_MISO;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = -1, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
ESP_LOGI(TAG, "check quad flag...");
flags_expected = SPICOMMON_BUSFLAG_QUAD;
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = -1, .quadwp_io_num = HSPI_IOMUX_PIN_NUM_WP,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
cfg = (spi_bus_config_t){.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI, .miso_io_num = HSPI_IOMUX_PIN_NUM_MISO, .sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK, .quadhd_io_num = HSPI_IOMUX_PIN_NUM_HD, .quadwp_io_num = -1,
.max_transfer_sz = 8, .flags = flags_expected};
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_MASTER, &flags_o));
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, spicommon_bus_initialize_io(HSPI_HOST, &cfg, 0, flags_expected|SPICOMMON_BUSFLAG_SLAVE, &flags_o));
}
TEST_CASE("SPI Master no response when switch from host1 (HSPI) to host2 (VSPI)", "[spi]")
{
//spi config
spi_bus_config_t bus_config;
spi_device_interface_config_t device_config;
spi_device_handle_t spi;
spi_host_device_t host;
int dma = 1;
memset(&bus_config, 0, sizeof(spi_bus_config_t));
memset(&device_config, 0, sizeof(spi_device_interface_config_t));
bus_config.miso_io_num = -1;
bus_config.mosi_io_num = 26;
bus_config.sclk_io_num = 25;
bus_config.quadwp_io_num = -1;
bus_config.quadhd_io_num = -1;
device_config.clock_speed_hz = 50000;
device_config.mode = 0;
device_config.spics_io_num = -1;
device_config.queue_size = 1;
device_config.flags = SPI_DEVICE_TXBIT_LSBFIRST | SPI_DEVICE_RXBIT_LSBFIRST;
struct spi_transaction_t transaction = {
.flags = SPI_TRANS_USE_TXDATA | SPI_TRANS_USE_RXDATA,
.length = 16,
.rx_buffer = NULL,
.tx_data = {0x04, 0x00}
};
//initialize for first host
host = 1;
TEST_ASSERT(spi_bus_initialize(host, &bus_config, dma) == ESP_OK);
TEST_ASSERT(spi_bus_add_device(host, &device_config, &spi) == ESP_OK);
printf("before first xmit\n");
TEST_ASSERT(spi_device_transmit(spi, &transaction) == ESP_OK);
printf("after first xmit\n");
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
TEST_ASSERT(spi_bus_free(host) == ESP_OK);
//for second host and failed before
host = 2;
TEST_ASSERT(spi_bus_initialize(host, &bus_config, dma) == ESP_OK);
TEST_ASSERT(spi_bus_add_device(host, &device_config, &spi) == ESP_OK);
printf("before second xmit\n");
// the original version (bit mis-written) stucks here.
TEST_ASSERT(spi_device_transmit(spi, &transaction) == ESP_OK);
// test case success when see this.
printf("after second xmit\n");
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
TEST_ASSERT(spi_bus_free(host) == ESP_OK);
}
IRAM_ATTR static uint32_t data_iram[320];
DRAM_ATTR static uint32_t data_dram[320]={0};
//force to place in code area.
static const uint32_t data_drom[320] = {0};
#if 1 //HSPI
#define PIN_NUM_MISO HSPI_IOMUX_PIN_NUM_MISO
#define PIN_NUM_MOSI HSPI_IOMUX_PIN_NUM_MOSI
#define PIN_NUM_CLK HSPI_IOMUX_PIN_NUM_CLK
#define PIN_NUM_CS HSPI_IOMUX_PIN_NUM_CS
#elif 1 //VSPI
#define PIN_NUM_MISO VSPI_IOMUX_PIN_NUM_MISO
#define PIN_NUM_MOSI VSPI_IOMUX_PIN_NUM_MOSI
#define PIN_NUM_CLK VSPI_IOMUX_PIN_NUM_CLK
#define PIN_NUM_CS VSPI_IOMUX_PIN_NUM_CS
#endif
#define PIN_NUM_DC 21
#define PIN_NUM_RST 18
#define PIN_NUM_BCKL 5
TEST_CASE("SPI Master DMA test, TX and RX in different regions", "[spi]")
{
uint32_t data_rxdram[320];
esp_err_t ret;
spi_device_handle_t spi;
spi_bus_config_t buscfg={
.miso_io_num=PIN_NUM_MISO,
.mosi_io_num=PIN_NUM_MOSI,
.sclk_io_num=PIN_NUM_CLK,
.quadwp_io_num=-1,
.quadhd_io_num=-1
};
spi_device_interface_config_t devcfg={
.clock_speed_hz=10000000, //Clock out at 10 MHz
.mode=0, //SPI mode 0
.spics_io_num=PIN_NUM_CS, //CS pin
.queue_size=7, //We want to be able to queue 7 transactions at a time
.pre_cb=NULL, //Specify pre-transfer callback to handle D/C line
};
//Initialize the SPI bus
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
TEST_ASSERT(ret==ESP_OK);
//Attach the LCD to the SPI bus
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &spi);
TEST_ASSERT(ret==ESP_OK);
static spi_transaction_t trans[6];
int x;
printf("iram: %p, dram: %p, drom: %p\n", data_iram, data_dram, data_drom);
memset(trans, 0, 6*sizeof(spi_transaction_t));
trans[0].length = 320*8,
trans[0].tx_buffer = data_iram;
trans[0].rx_buffer = data_rxdram;
trans[1].length = 320*8,
trans[1].tx_buffer = data_dram;
trans[1].rx_buffer = data_rxdram;
trans[2].length = 320*8,
trans[2].tx_buffer = data_drom;
trans[2].rx_buffer = data_rxdram;
trans[3].length = 320*8,
trans[3].tx_buffer = data_drom;
trans[3].rx_buffer = data_iram;
trans[4].length = 320*8,
trans[4].rxlength = 8*4;
trans[4].tx_buffer = data_drom;
trans[4].flags = SPI_TRANS_USE_RXDATA;
trans[5].length = 8*4;
trans[5].flags = SPI_TRANS_USE_RXDATA | SPI_TRANS_USE_TXDATA;
//Queue all transactions.
for (x=0; x<6; x++) {
ret=spi_device_queue_trans(spi,&trans[x], portMAX_DELAY);
TEST_ASSERT(ret==ESP_OK);
}
for (x=0; x<6; x++) {
spi_transaction_t* ptr;
ret=spi_device_get_trans_result(spi,&ptr, portMAX_DELAY);
TEST_ASSERT(ret==ESP_OK);
TEST_ASSERT(ptr = trans+x);
}
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
TEST_ASSERT(spi_bus_free(HSPI_HOST) == ESP_OK);
}
//this part tests 3 DMA issues in master mode, full-duplex in IDF2.1
// 1. RX buffer not aligned (start and end)
// 2. not setting rx_buffer
// 3. setting rx_length != length
TEST_CASE("SPI Master DMA test: length, start, not aligned", "[spi]")
{
uint8_t tx_buf[320]={0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43};
uint8_t rx_buf[320];
esp_err_t ret;
spi_device_handle_t spi;
spi_bus_config_t buscfg={
.miso_io_num=PIN_NUM_MOSI,
.mosi_io_num=PIN_NUM_MOSI,
.sclk_io_num=PIN_NUM_CLK,
.quadwp_io_num=-1,
.quadhd_io_num=-1
};
spi_device_interface_config_t devcfg={
.clock_speed_hz=10*1000*1000, //Clock out at 10 MHz
.mode=0, //SPI mode 0
.spics_io_num=PIN_NUM_CS, //CS pin
.queue_size=7, //We want to be able to queue 7 transactions at a time
.pre_cb=NULL,
};
//Initialize the SPI bus
ret=spi_bus_initialize(HSPI_HOST, &buscfg, 1);
TEST_ASSERT(ret==ESP_OK);
//Attach the LCD to the SPI bus
ret=spi_bus_add_device(HSPI_HOST, &devcfg, &spi);
TEST_ASSERT(ret==ESP_OK);
//connect MOSI to two devices breaks the output, fix it.
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
memset(rx_buf, 0x66, 320);
for ( int i = 0; i < 8; i ++ ) {
memset( rx_buf, 0x66, sizeof(rx_buf));
spi_transaction_t t = {};
t.length = 8*(i+1);
t.rxlength = 0;
t.tx_buffer = tx_buf+2*i;
t.rx_buffer = rx_buf + i;
if ( i == 1 ) {
//test set no start
t.rx_buffer = NULL;
} else if ( i == 2 ) {
//test rx length != tx_length
t.rxlength = t.length - 8;
}
spi_device_transmit( spi, &t );
for( int i = 0; i < 16; i ++ ) {
printf("%02X ", rx_buf[i]);
}
printf("\n");
if ( i == 1 ) {
// no rx, skip check
} else if ( i == 2 ) {
//test rx length = tx length-1
TEST_ASSERT_EQUAL_HEX8_ARRAY(t.tx_buffer, t.rx_buffer, t.length/8-1 );
} else {
//normal check
TEST_ASSERT_EQUAL_HEX8_ARRAY(t.tx_buffer, t.rx_buffer, t.length/8 );
}
}
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
TEST_ASSERT(spi_bus_free(HSPI_HOST) == ESP_OK);
}
static const char MASTER_TAG[] = "test_master";
static const char SLAVE_TAG[] = "test_slave";
DRAM_ATTR static uint8_t master_send[] = {0x93, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0xaa, 0xcc, 0xff, 0xee, 0x55, 0x77, 0x88, 0x43};
DRAM_ATTR static uint8_t slave_send[] = { 0xaa, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10, 0x13, 0x57, 0x9b, 0xdf, 0x24, 0x68, 0xac, 0xe0 };
static void master_deinit(spi_device_handle_t spi)
{
TEST_ESP_OK( spi_bus_remove_device(spi) );
TEST_ESP_OK( spi_bus_free(HSPI_HOST) );
}
#define SPI_SLAVE_TEST_DEFAULT_CONFIG() {\
.mode=0,\
.spics_io_num=PIN_NUM_CS,\
.queue_size=3,\
.flags=0,\
}
static void slave_pull_up(const spi_bus_config_t* cfg, int spics_io_num)
{
gpio_set_pull_mode(cfg->mosi_io_num, GPIO_PULLUP_ENABLE);
gpio_set_pull_mode(cfg->sclk_io_num, GPIO_PULLUP_ENABLE);
gpio_set_pull_mode(spics_io_num, GPIO_PULLUP_ENABLE);
}
typedef struct {
uint32_t len;
uint8_t *start;
} slave_txdata_t;
typedef struct {
uint32_t len;
uint8_t* tx_start;
uint8_t data[1];
} slave_rxdata_t;
typedef struct {
spi_host_device_t spi;
RingbufHandle_t data_received;
QueueHandle_t data_to_send;
} spi_slave_task_context_t;
esp_err_t init_slave_context(spi_slave_task_context_t *context)
{
context->data_to_send = xQueueCreate( 16, sizeof( slave_txdata_t ));
if ( context->data_to_send == NULL ) {
return ESP_ERR_NO_MEM;
}
context->data_received = xRingbufferCreate( 1024, RINGBUF_TYPE_NOSPLIT );
if ( context->data_received == NULL ) {
return ESP_ERR_NO_MEM;
}
context->spi=VSPI_HOST;
return ESP_OK;
}
void deinit_slave_context(spi_slave_task_context_t *context)
{
TEST_ASSERT( context->data_to_send != NULL );
vQueueDelete( context->data_to_send );
context->data_to_send = NULL;
TEST_ASSERT( context->data_received != NULL );
vRingbufferDelete( context->data_received );
context->data_received = NULL;
}
/* The task requires a queue and a ringbuf, which should be initialized before task starts.
Send ``slave_txdata_t`` to the queue to make the task send data;
the task returns data got to the ringbuf, which should have sufficient size.
*/
static void task_slave(void* arg)
{
spi_slave_task_context_t* context = (spi_slave_task_context_t*) arg;
QueueHandle_t queue = context->data_to_send;
RingbufHandle_t ringbuf = context->data_received;
uint8_t recvbuf[320+8];
slave_txdata_t txdata;
ESP_LOGI( SLAVE_TAG, "slave up" );
//never quit, but blocked by the queue, waiting to be killed, when no more send from main task.
while( 1 ) {
xQueueReceive( queue, &txdata, portMAX_DELAY );
ESP_LOGI( "test", "to send: %p", txdata.start );
spi_slave_transaction_t t = {};
t.length = txdata.len;
t.tx_buffer = txdata.start;
t.rx_buffer = recvbuf+8;
//loop until trans_len != 0 to skip glitches
memset(recvbuf, 0x66, sizeof(recvbuf));
do {
TEST_ESP_OK( spi_slave_transmit( context->spi, &t, portMAX_DELAY ) );
} while ( t.trans_len == 0 );
memcpy(recvbuf, &t.trans_len, sizeof(uint32_t));
*(uint8_t**)(recvbuf+4) = txdata.start;
ESP_LOGI( SLAVE_TAG, "received: %d", t.trans_len );
xRingbufferSend( ringbuf, recvbuf, 8+(t.trans_len+7)/8, portMAX_DELAY );
}
}
#define TEST_SPI_HOST HSPI_HOST
#define TEST_SLAVE_HOST VSPI_HOST
static uint8_t bitswap(uint8_t in)
{
uint8_t out = 0;
for (int i = 0; i < 8; i++) {
out = out >> 1;
if (in&0x80) out |= 0x80;
in = in << 1;
}
return out;
}
void test_cmd_addr(spi_slave_task_context_t *slave_context, bool lsb_first)
{
spi_device_handle_t spi;
ESP_LOGI(MASTER_TAG, ">>>>>>>>> TEST %s FIRST <<<<<<<<<<<", lsb_first?"LSB":"MSB");
//initial master, mode 0, 1MHz
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST, &buscfg, 1));
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
devcfg.clock_speed_hz = 1*1000*1000;
if (lsb_first) devcfg.flags |= SPI_DEVICE_BIT_LSBFIRST;
TEST_ESP_OK(spi_bus_add_device(TEST_SPI_HOST, &devcfg, &spi));
//connecting pins to two peripherals breaks the output, fix it.
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spid_out);
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, spi_periph_signal[TEST_SLAVE_HOST].spiq_out);
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spics_out[0]);
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, spi_periph_signal[TEST_SPI_HOST].spiclk_out);
for (int i= 0; i < 8; i++) {
//prepare slave tx data
slave_txdata_t slave_txdata = (slave_txdata_t) {
.start = slave_send,
.len = 256,
};
xQueueSend(slave_context->data_to_send, &slave_txdata, portMAX_DELAY);
vTaskDelay(50);
//prepare master tx data
int cmd_bits = (i+1)*2;
int addr_bits = 56-8*i;
int round_up = (cmd_bits+addr_bits+7)/8*8;
addr_bits = round_up - cmd_bits;
spi_transaction_ext_t trans = (spi_transaction_ext_t) {
.base = {
.flags = SPI_TRANS_VARIABLE_CMD | SPI_TRANS_VARIABLE_ADDR,
.addr = 0x456789abcdef0123,
.cmd = 0xcdef,
},
.command_bits = cmd_bits,
.address_bits = addr_bits,
};
ESP_LOGI( MASTER_TAG, "===== test%d =====", i );
ESP_LOGI(MASTER_TAG, "cmd_bits： %d, addr_bits: %d", cmd_bits, addr_bits);
TEST_ESP_OK(spi_device_transmit(spi, (spi_transaction_t*)&trans));
//wait for both master and slave end
size_t rcv_len;
slave_rxdata_t *rcv_data = xRingbufferReceive(slave_context->data_received, &rcv_len, portMAX_DELAY);
rcv_len-=8;
uint8_t *buffer = rcv_data->data;
ESP_LOGI(SLAVE_TAG, "trans_len: %d", rcv_len);
TEST_ASSERT_EQUAL(rcv_len, (rcv_data->len+7)/8);
TEST_ASSERT_EQUAL(rcv_data->len, cmd_bits+addr_bits);
ESP_LOG_BUFFER_HEX("slave rx", buffer, rcv_len);
uint16_t cmd_expected = trans.base.cmd & (BIT(cmd_bits) - 1);
uint64_t addr_expected = trans.base.addr & ((1ULL<<addr_bits) - 1);
uint8_t *data_ptr = buffer;
uint16_t cmd_got = *(uint16_t*)data_ptr;
data_ptr += cmd_bits/8;
cmd_got = __builtin_bswap16(cmd_got);
cmd_got = cmd_got >> (16-cmd_bits);
int remain_bits = cmd_bits % 8;
uint64_t addr_got = *(uint64_t*)data_ptr;
data_ptr += 8;
addr_got = __builtin_bswap64(addr_got);
addr_got = (addr_got << remain_bits);
addr_got |= (*data_ptr >> (8-remain_bits));
addr_got = addr_got >> (64-addr_bits);
if (lsb_first) {
cmd_got = __builtin_bswap16(cmd_got);
addr_got = __builtin_bswap64(addr_got);
uint8_t *swap_ptr = (uint8_t*)&cmd_got;
swap_ptr[0] = bitswap(swap_ptr[0]);
swap_ptr[1] = bitswap(swap_ptr[1]);
cmd_got = cmd_got >> (16-cmd_bits);
swap_ptr = (uint8_t*)&addr_got;
for (int j = 0; j < 8; j++) swap_ptr[j] = bitswap(swap_ptr[j]);
addr_got = addr_got >> (64-addr_bits);
}
ESP_LOGI(SLAVE_TAG, "cmd_got: %04X, addr_got: %08X%08X", cmd_got, (uint32_t)(addr_got>>32), (uint32_t)addr_got);
TEST_ASSERT_EQUAL_HEX16(cmd_expected, cmd_got);
if (addr_bits > 0) {
TEST_ASSERT_EQUAL_HEX32(addr_expected, addr_got);
TEST_ASSERT_EQUAL_HEX32(addr_expected >> 8, addr_got >> 8);
}
//clean
vRingbufferReturnItem(slave_context->data_received, buffer);
}
TEST_ASSERT(spi_bus_remove_device(spi) == ESP_OK);
TEST_ASSERT(spi_bus_free(TEST_SPI_HOST) == ESP_OK);
}
TEST_CASE("SPI master variable cmd & addr test","[spi]")
{
spi_slave_task_context_t slave_context = {};
esp_err_t err = init_slave_context( &slave_context );
TEST_ASSERT( err == ESP_OK );
TaskHandle_t handle_slave;
xTaskCreate( task_slave, "spi_slave", 4096, &slave_context, 0, &handle_slave);
//initial slave, mode 0, no dma
int dma_chan = 0;
int slave_mode = 0;
spi_bus_config_t slv_buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
spi_slave_interface_config_t slvcfg=SPI_SLAVE_TEST_DEFAULT_CONFIG();
slvcfg.mode = slave_mode;
//Initialize SPI slave interface
TEST_ESP_OK( spi_slave_initialize(TEST_SLAVE_HOST, &slv_buscfg, &slvcfg, dma_chan) );
test_cmd_addr(&slave_context, false);
test_cmd_addr(&slave_context, true);
vTaskDelete( handle_slave );
handle_slave = 0;
deinit_slave_context(&slave_context);
TEST_ASSERT(spi_slave_free(TEST_SLAVE_HOST) == ESP_OK);
ESP_LOGI(MASTER_TAG, "test passed.");
}
/********************************************************************************
* Test Timing By Internal Connections
********************************************************************************/
typedef enum {
FULL_DUPLEX = 0,
HALF_DUPLEX_MISO = 1,
HALF_DUPLEX_MOSI = 2,
} spi_dup_t;
static int timing_speed_array[]={/**/
SPI_MASTER_FREQ_8M ,
SPI_MASTER_FREQ_9M ,
SPI_MASTER_FREQ_10M,
SPI_MASTER_FREQ_11M,
SPI_MASTER_FREQ_13M,
SPI_MASTER_FREQ_16M,
SPI_MASTER_FREQ_20M,
SPI_MASTER_FREQ_26M,
SPI_MASTER_FREQ_40M,
SPI_MASTER_FREQ_80M,
};
typedef struct {
uint8_t master_rxbuf[320];
spi_transaction_t master_trans[16];
TaskHandle_t handle_slave;
spi_slave_task_context_t slave_context;
slave_txdata_t slave_trans[16];
} timing_context_t;
void master_print_data(spi_transaction_t *t, spi_dup_t dup)
{
if (t->tx_buffer) {
ESP_LOG_BUFFER_HEX( "master tx", t->tx_buffer, t->length/8 );
} else {
ESP_LOGI( "master tx", "no data" );
}
int rxlength;
if (dup!=HALF_DUPLEX_MISO) {
rxlength = t->length/8;
} else {
rxlength = t->rxlength/8;
}
if (t->rx_buffer) {
ESP_LOG_BUFFER_HEX( "master rx", t->rx_buffer, rxlength );
} else {
ESP_LOGI( "master rx", "no data" );
}
}
void slave_print_data(slave_rxdata_t *t)
{
int rcv_len = (t->len+7)/8;
ESP_LOGI(SLAVE_TAG, "trans_len: %d", t->len);
ESP_LOG_BUFFER_HEX( "slave tx", t->tx_start, rcv_len);
ESP_LOG_BUFFER_HEX( "slave rx", t->data, rcv_len);
}
esp_err_t check_data(spi_transaction_t *t, spi_dup_t dup, slave_rxdata_t *slave_t)
{
int length;
if (dup!=HALF_DUPLEX_MISO) {
length = t->length;
} else {
length = t->rxlength;
}
TEST_ASSERT(length!=0);
//currently the rcv_len can be in range of [t->length-1, t->length+3]
uint32_t rcv_len = slave_t->len;
TEST_ASSERT(rcv_len >= length-1 && rcv_len <= length+3);
//the timing speed is temporarily only for master
if (dup!=HALF_DUPLEX_MISO) {
// TEST_ASSERT_EQUAL_HEX8_ARRAY(t->tx_buffer, slave_t->data, (t->length+7)/8);
}
if (dup!=HALF_DUPLEX_MOSI) {
TEST_ASSERT_EQUAL_HEX8_ARRAY(slave_t->tx_start, t->rx_buffer, (length+7)/8);
}
return ESP_OK;
}
static void timing_init_transactions(spi_dup_t dup, timing_context_t* context)
{
spi_transaction_t* trans = context->master_trans;
uint8_t *rx_buf_ptr = context->master_rxbuf;
if (dup==HALF_DUPLEX_MISO) {
for (int i = 0; i < 8; i++ ) {
trans[i] = (spi_transaction_t) {
.flags = 0,
.rxlength = 8*(i*2+1),
.rx_buffer = rx_buf_ptr,
};
rx_buf_ptr += ((context->master_trans[i].rxlength + 31)/8)&(~3);
}
} else if (dup==HALF_DUPLEX_MOSI) {
for (int i = 0; i < 8; i++ ) {
trans[i] = (spi_transaction_t) {
.flags = 0,
.length = 8*(i*2+1),
.tx_buffer = master_send+i,
};
}
} else {
for (int i = 0; i < 8; i++ ) {
trans[i] = (spi_transaction_t) {
.flags = 0,
.length = 8*(i*2+1),
.tx_buffer = master_send+i,
.rx_buffer = rx_buf_ptr,
};
rx_buf_ptr += ((context->master_trans[i].length + 31)/8)&(~3);
}
}
//prepare slave tx data
for (int i = 0; i < 8; i ++) {
context->slave_trans[i] = (slave_txdata_t) {
.start = slave_send + 4*(i%3),
.len = 256,
};
}
}
typedef struct {
const char cfg_name[30];
/*The test work till the frequency below,
*set the frequency to higher and remove checks in the driver to know how fast the system can run.
*/
int freq_limit;
spi_dup_t dup;
bool master_iomux;
bool slave_iomux;
int slave_tv_ns;
} test_timing_config_t;
#define ESP_SPI_SLAVE_TV (12.5*3)
#define GPIO_DELAY (12.5*2)
#define SAMPLE_DELAY 12.5
#define TV_INT_CONNECT_GPIO (ESP_SPI_SLAVE_TV+GPIO_DELAY)
#define TV_INT_CONNECT (ESP_SPI_SLAVE_TV)
#define TV_WITH_ESP_SLAVE_GPIO (ESP_SPI_SLAVE_TV+SAMPLE_DELAY+GPIO_DELAY)
#define TV_WITH_ESP_SLAVE (ESP_SPI_SLAVE_TV+SAMPLE_DELAY)
//currently ESP32 slave only supports up to 20MHz, but 40MHz on the same board
#define ESP_SPI_SLAVE_MAX_FREQ SPI_MASTER_FREQ_20M
#define ESP_SPI_SLAVE_MAX_FREQ_SYNC SPI_MASTER_FREQ_40M
static test_timing_config_t timing_master_conf_t[] = {/**/
{ .cfg_name = "FULL_DUP, MASTER IOMUX",
.freq_limit = SPI_MASTER_FREQ_13M,
.dup = FULL_DUPLEX,
.master_iomux = true,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
{ .cfg_name = "FULL_DUP, SLAVE IOMUX",
.freq_limit = SPI_MASTER_FREQ_13M,
.dup = FULL_DUPLEX,
.master_iomux = false,
.slave_iomux = true,
.slave_tv_ns = TV_INT_CONNECT,
},
{ .cfg_name = "FULL_DUP, BOTH GPIO",
.freq_limit = SPI_MASTER_FREQ_10M,
.dup = FULL_DUPLEX,
.master_iomux = false,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
{ .cfg_name = "HALF_DUP, MASTER IOMUX",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MISO,
.master_iomux = true,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
{ .cfg_name = "HALF_DUP, SLAVE IOMUX",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MISO,
.master_iomux = false,
.slave_iomux = true,
.slave_tv_ns = TV_INT_CONNECT,
},
{ .cfg_name = "HALF_DUP, BOTH GPIO",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MISO,
.master_iomux = false,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
{ .cfg_name = "MOSI_DUP, MASTER IOMUX",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MOSI,
.master_iomux = true,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
{ .cfg_name = "MOSI_DUP, SLAVE IOMUX",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MOSI,
.master_iomux = false,
.slave_iomux = true,
.slave_tv_ns = TV_INT_CONNECT,
},
{ .cfg_name = "MOSI_DUP, BOTH GPIO",
.freq_limit = ESP_SPI_SLAVE_MAX_FREQ_SYNC,
.dup = HALF_DUPLEX_MOSI,
.master_iomux = false,
.slave_iomux = false,
.slave_tv_ns = TV_INT_CONNECT_GPIO,
},
};
//this case currently only checks master read
TEST_CASE("test timing_master","[spi][timeout=120]")
{
timing_context_t context;
//Enable pull-ups on SPI lines so we don't detect rogue pulses when no master is connected.
//slave_pull_up(&slv_buscfg, slvcfg.spics_io_num);
context.slave_context = (spi_slave_task_context_t){};
esp_err_t err = init_slave_context( &context.slave_context );
TEST_ASSERT( err == ESP_OK );
xTaskCreate( task_slave, "spi_slave", 4096, &context.slave_context, 0, &context.handle_slave);
const int test_size = sizeof(timing_master_conf_t)/sizeof(test_timing_config_t);
for (int i = 0; i < test_size; i++) {
test_timing_config_t* conf = &timing_master_conf_t[i];
spi_device_handle_t spi;
timing_init_transactions(conf->dup, &context);
ESP_LOGI(MASTER_TAG, "****************** %s ***************", conf->cfg_name);
for (int j=0; j<sizeof(timing_speed_array)/sizeof(int); j++ ) {
if (timing_speed_array[j] > conf->freq_limit) break;
ESP_LOGI(MASTER_TAG, "======> %dk", timing_speed_array[j]/1000);
//master config
const int master_mode = 0;
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
devcfg.mode = master_mode;
if (conf->dup==HALF_DUPLEX_MISO||conf->dup==HALF_DUPLEX_MOSI) {
devcfg.cs_ena_pretrans = 20;
devcfg.flags |= SPI_DEVICE_HALFDUPLEX;
} else {
devcfg.cs_ena_pretrans = 1;
}
devcfg.cs_ena_posttrans = 20;
devcfg.input_delay_ns = conf->slave_tv_ns;
devcfg.clock_speed_hz = timing_speed_array[j];
//slave config
int slave_mode = 0;
spi_slave_interface_config_t slvcfg=SPI_SLAVE_TEST_DEFAULT_CONFIG();
slvcfg.mode = slave_mode;
//pin config & initialize
//we can't have two sets of iomux pins on the same pins
assert(!conf->master_iomux || !conf->slave_iomux);
if (conf->slave_iomux) {
//only in this case, use VSPI iomux pins
buscfg.miso_io_num = VSPI_IOMUX_PIN_NUM_MISO;
buscfg.mosi_io_num = VSPI_IOMUX_PIN_NUM_MOSI;
buscfg.sclk_io_num = VSPI_IOMUX_PIN_NUM_CLK;
devcfg.spics_io_num = VSPI_IOMUX_PIN_NUM_CS;
slvcfg.spics_io_num = VSPI_IOMUX_PIN_NUM_CS;
} else {
buscfg.miso_io_num = HSPI_IOMUX_PIN_NUM_MISO;
buscfg.mosi_io_num = HSPI_IOMUX_PIN_NUM_MOSI;
buscfg.sclk_io_num = HSPI_IOMUX_PIN_NUM_CLK;
devcfg.spics_io_num = HSPI_IOMUX_PIN_NUM_CS;
slvcfg.spics_io_num = HSPI_IOMUX_PIN_NUM_CS;
}
slave_pull_up(&buscfg, slvcfg.spics_io_num);
//this does nothing, but avoid the driver from using iomux pins if required
buscfg.quadhd_io_num = (!conf->master_iomux && !conf->slave_iomux? VSPI_IOMUX_PIN_NUM_MISO: -1);
TEST_ESP_OK(spi_bus_initialize(HSPI_HOST, &buscfg, 0));
TEST_ESP_OK(spi_bus_add_device(HSPI_HOST, &devcfg, &spi));
//slave automatically use iomux pins if pins are on VSPI_* pins
buscfg.quadhd_io_num = -1;
TEST_ESP_OK( spi_slave_initialize(VSPI_HOST, &buscfg, &slvcfg, 0) );
//initialize master and slave on the same pins break some of the output configs, fix them
if (conf->master_iomux) {
gpio_output_sel(buscfg.mosi_io_num, FUNC_SPI, HSPID_OUT_IDX);
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, VSPIQ_OUT_IDX);
gpio_output_sel(devcfg.spics_io_num, FUNC_SPI, HSPICS0_OUT_IDX);
gpio_output_sel(buscfg.sclk_io_num, FUNC_SPI, HSPICLK_OUT_IDX);
} else if (conf->slave_iomux) {
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
gpio_output_sel(buscfg.miso_io_num, FUNC_SPI, VSPIQ_OUT_IDX);
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, HSPICS0_OUT_IDX);
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, HSPICLK_OUT_IDX);
} else {
gpio_output_sel(buscfg.mosi_io_num, FUNC_GPIO, HSPID_OUT_IDX);
gpio_output_sel(buscfg.miso_io_num, FUNC_GPIO, VSPIQ_OUT_IDX);
gpio_output_sel(devcfg.spics_io_num, FUNC_GPIO, HSPICS0_OUT_IDX);
gpio_output_sel(buscfg.sclk_io_num, FUNC_GPIO, HSPICLK_OUT_IDX);
}
//clear master receive buffer
memset(context.master_rxbuf, 0x66, sizeof(context.master_rxbuf));
//prepare slave tx data
for (int k = 0; k < 8; k ++) xQueueSend( context.slave_context.data_to_send, &context.slave_trans[k], portMAX_DELAY );
for( int k= 0; k < 8; k ++ ) {
//wait for both master and slave end
ESP_LOGI( MASTER_TAG, "=> test%d", k );
//send master tx data
vTaskDelay(9);
spi_transaction_t *t = &context.master_trans[k];
TEST_ESP_OK (spi_device_transmit( spi, t) );
master_print_data(t, conf->dup);
size_t rcv_len;
slave_rxdata_t *rcv_data = xRingbufferReceive( context.slave_context.data_received, &rcv_len, portMAX_DELAY );
slave_print_data(rcv_data);
//check result
TEST_ESP_OK(check_data(t, conf->dup, rcv_data));
//clean
vRingbufferReturnItem(context.slave_context.data_received, rcv_data);
}
master_deinit(spi);
TEST_ASSERT(spi_slave_free(VSPI_HOST) == ESP_OK);
}
}
vTaskDelete( context.handle_slave );
context.handle_slave = 0;
deinit_slave_context(&context.slave_context);
ESP_LOGI(MASTER_TAG, "test passed.");
}
/********************************************************************************
* Test SPI transaction interval
********************************************************************************/
#define RECORD_TIME_PREPARE() uint32_t __t1, __t2
#define RECORD_TIME_START() do {__t1 = xthal_get_ccount();}while(0)
#define RECORD_TIME_END(p_time) do{__t2 = xthal_get_ccount(); *p_time = (__t2-__t1)/240;}while(0)
static void speed_setup(spi_device_handle_t* spi, bool use_dma)
{
esp_err_t ret;
spi_bus_config_t buscfg=SPI_BUS_TEST_DEFAULT_CONFIG();
spi_device_interface_config_t devcfg=SPI_DEVICE_TEST_DEFAULT_CONFIG();
devcfg.queue_size=8; //We want to be able to queue 7 transactions at a time
//Initialize the SPI bus and the device to test
ret=spi_bus_initialize(HSPI_HOST, &buscfg, (use_dma?1:0));
TEST_ASSERT(ret==ESP_OK);
ret=spi_bus_add_device(HSPI_HOST, &devcfg, spi);
TEST_ASSERT(ret==ESP_OK);
}
static void speed_deinit(spi_device_handle_t spi)
{
TEST_ESP_OK( spi_bus_remove_device(spi) );
TEST_ESP_OK( spi_bus_free(HSPI_HOST) );
}
static void sorted_array_insert(uint32_t* array, int* size, uint32_t item)
{
int pos;
for (pos = *size; pos>0; pos--) {
if (array[pos-1] < item) break;
array[pos] = array[pos-1];
}
array[pos]=item;
(*size)++;
}
#define TEST_TIMES 11
TEST_CASE("spi_speed","[spi]")
{
RECORD_TIME_PREPARE();
uint32_t t_flight;
//to get rid of the influence of randomly interrupts, we measured the performance by median value
uint32_t t_flight_sorted[TEST_TIMES];
int t_flight_num = 0;
spi_device_handle_t spi;
const bool use_dma = true;
WORD_ALIGNED_ATTR spi_transaction_t trans = {
.length = 1*8,
.flags = SPI_TRANS_USE_TXDATA,
};
//first work with DMA
speed_setup(&spi, use_dma);
//first time introduces a device switch, which costs more time. we skip this
spi_device_transmit(spi, &trans);
//record flight time by isr, with DMA
t_flight_num = 0;
for (int i = 0; i < TEST_TIMES; i++) {
spi_device_transmit(spi, &trans); // prime the flash cache
RECORD_TIME_START();
spi_device_transmit(spi, &trans);
RECORD_TIME_END(&t_flight);
sorted_array_insert(t_flight_sorted, &t_flight_num, t_flight);
}
TEST_PERFORMANCE_LESS_THAN(SPI_PER_TRANS_NO_POLLING, "%d us", t_flight_sorted[(TEST_TIMES+1)/2]);
for (int i = 0; i < TEST_TIMES; i++) {
ESP_LOGI(TAG, "%d", t_flight_sorted[i]);
}
speed_deinit(spi);
speed_setup(&spi, !use_dma);
//first time introduces a device switch, which costs more time. we skip this
spi_device_transmit(spi, &trans);
//record flight time by isr, without DMA
t_flight_num = 0;
for (int i = 0; i < TEST_TIMES; i++) {
RECORD_TIME_START();
spi_device_transmit(spi, &trans);
RECORD_TIME_END(&t_flight);
sorted_array_insert(t_flight_sorted, &t_flight_num, t_flight);
}
TEST_PERFORMANCE_LESS_THAN( SPI_PER_TRANS_NO_POLLING_NO_DMA, "%d us", t_flight_sorted[(TEST_TIMES+1)/2]);
for (int i = 0; i < TEST_TIMES; i++) {
ESP_LOGI(TAG, "%d", t_flight_sorted[i]);
}
speed_deinit(spi);
}
Reference in New Issue View Git Blame Copy Permalink