mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
289 lines
12 KiB
ReStructuredText
289 lines
12 KiB
ReStructuredText
.. _esp-wroom-solo-wrover-modules:
|
||
|
||
Modules
|
||
=======
|
||
|
||
This is a family of ESP32-based modules with some integrated key components, including a crystal oscillator and an antenna matching circuit. The modules constitute ready-made solutions for integration into final products. If combined with a few extra components, such as a programming interface, bootstrapping resistors, and pin headers, these modules can also be used for evaluation of ESP32's functionality.
|
||
|
||
The key characteristics of these modules are summarized in the table below. Some additional details are covered in the following sections.
|
||
|
||
=================== ============ =========== ========= ==== ===============
|
||
Module Chip Flash, MB PSRAM, MB Ant. Dimensions, mm
|
||
=================== ============ =========== ========= ==== ===============
|
||
ESP32-WROOM-32 ESP32-D0WDQ6 4 -- MIFA 18 × 25.5 × 3.1
|
||
ESP32-WROOM-32D ESP32-D0WD 4, 8, or 16 -- MIFA 18 × 25.5 × 3.1
|
||
ESP32-WROOM-32U ESP32-D0WD 4, 8, or 16 -- U.FL 18 × 19.2 × 3.1
|
||
ESP32-SOLO-1 ESP32-S0WD 4 -- MIFA 18 × 25.5 × 3.1
|
||
ESP32-WROVER (PCB) ESP32-D0WDQ6 4 8 MIFA 18 × 31.4 × 3.3
|
||
ESP32-WROVER (IPEX) ESP32-D0WDQ6 4 8 U.FL 18 × 31.4 × 3.3
|
||
ESP32-WROVER-B ESP32-D0WD 4, 8, or 16 8 MIFA 18 × 31.4 × 3.3
|
||
ESP32-WROVER-IB ESP32-D0WD 4, 8, or 16 8 U.FL 18 × 31.4 × 3.3
|
||
=================== ============ =========== ========= ==== ===============
|
||
|
||
* ESP32-**D**.. identifies a dual-core chip, ESP32-**S**.. identifies a single-core chip
|
||
* MIFA - Meandered Inverted-F Antenna
|
||
* U.FL - U.FL / IPEX antenna connector
|
||
* ESP32-WROOM-32x, ESP32-WROVER-B and ESP32-WROVER-IB modules come with 4 MB flash by default but also available with custom flash sizes of 8 MB and 16 MB, see `Espressif Products Ordering Information`_ (PDF)
|
||
* `ESP32 Chip Datasheet <https://espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf>`__ (PDF)
|
||
* Initial release of the ESP32-WROVER module had 4 MB of PSRAM
|
||
* *ESP32-WROOM-32* was previously called *ESP-WROOM-32*
|
||
|
||
|
||
.. _esp-modules-and-boards-esp32-wroom-32:
|
||
|
||
ESP32-WROOM-32
|
||
--------------
|
||
|
||
This is a basic and commonly adopted ESP32 module with the ESP32-D0WDQ6 chip on board. It was the first module of the WROOM / WROVER family released to the market.
|
||
|
||
For key characteristics, see the table in Section :ref:`esp-wroom-solo-wrover-modules`, `Espressif Products Ordering Information`_.
|
||
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-wroom-32-front-back.jpg
|
||
:align: center
|
||
:alt: ESP32-WROOM-32 module (front and back)
|
||
:width: 45%
|
||
|
||
ESP32-WROOM-32 module (front and back)
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* `ESP32-WROOM-32 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf>`__ (PDF)
|
||
* `ESP32-WROOM-32 Reference Design <https://www.espressif.com/en/support/download/documents?keys=+ESP32-WROOM-32+Reference>`_ containing OrCAD schematic, PCB layout, gerber and BOM files
|
||
|
||
|
||
.. _esp-modules-and-boards-esp32-wroom-32d-and-u:
|
||
|
||
ESP32-WROOM-32D / ESP32-WROOM-32U
|
||
---------------------------------
|
||
|
||
Both modules integrate the ESP32-D0WD chip which has a smaller footprint than the chip ESP32-D0WDQ6 installed in :ref:`esp-modules-and-boards-esp32-wroom-32`.
|
||
|
||
For key characteristics, see the table in Section :ref:`esp-wroom-solo-wrover-modules` and `Espressif Products Ordering Information`_.
|
||
|
||
ESP32-WROOM-32U is the smallest representative of the whole WROOM / WROVER family of modules.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-wroom-32d-front-back.jpg
|
||
:align: center
|
||
:alt: ESP32-WROOM-32D module (front and back)
|
||
:width: 45%
|
||
|
||
ESP32-WROOM-32D module (front and back)
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-wroom-32u-front-back.jpg
|
||
:align: center
|
||
:alt: ESP32-WROOM-32U module (front and back)
|
||
:width: 45%
|
||
|
||
ESP32-WROOM-32U module (front and back)
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* `ESP32-WROOM-32D / ESP32-WROOM-32U Datasheet <http://espressif.com/sites/default/files/documentation/esp32-wroom-32d_esp32-wroom-32u_datasheet_en.pdf>`__ (PDF)
|
||
|
||
|
||
.. _esp-modules-and-boards-esp32-solo-1:
|
||
|
||
ESP32-SOLO-1
|
||
------------
|
||
|
||
This is a simplified version of the ESP32-WROOM-32D module. It contains a single-core ESP32 chip that supports a clock frequency of up to 160 MHz.
|
||
|
||
For key characteristics, see the table in Section :ref:`esp-wroom-solo-wrover-modules` and `Espressif Products Ordering Information`_.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-solo-1-front-back.jpg
|
||
:align: center
|
||
:alt: ESP32-SOLO-1 module (front and back)
|
||
:width: 45%
|
||
|
||
ESP32-SOLO-1 module (front and back)
|
||
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* `ESP32-SOLO-1 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-solo-1_datasheet_en.pdf>`__ (PDF)
|
||
|
||
|
||
.. _esp-modules-and-boards-esp32-wrover:
|
||
|
||
ESP32-WROVER series
|
||
-------------------
|
||
|
||
This series consists of a few modifications of ESP32-WROOM-32x modules, which among other upgrades include additional 8 MB SPI PSRAM (pseudo static RAM).
|
||
|
||
For details, see the table in Section :ref:`esp-wroom-solo-wrover-modules` and `Espressif Products Ordering Information`_.
|
||
|
||
* **ESP32-WROVER (PCB)** and **ESP32-WROVER (IPEX)** have PSRAM that operates at 1.8 V and supports up to 144 MHz clock rate.
|
||
* **ESP32-WROVER-B** and **ESP32-WROVER-IB** have PSRAM that operates at 3.3 V and supports up to 133 MHz clock rate.
|
||
|
||
The picture below shows an ESP32-WROVER module with a PCB antenna.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-wrover.jpg
|
||
:align: center
|
||
:alt: ESP32-WROVER module (front and back)
|
||
:width: 40%
|
||
|
||
ESP32-WROVER module (front and back)
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* `ESP32-WROVER Datasheet <https://espressif.com/sites/default/files/documentation/esp32-wrover_datasheet_en.pdf>`__ (PDF)
|
||
* `ESP32-WROVER-B Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-wrover-b_datasheet_en.pdf>`__ (PDF)
|
||
* `ESP-PSRAM64 & ESP-PSRAM64H Datasheet <https://www.espressif.com/sites/default/files/documentation/esp-psram64_esp-psram64h_datasheet_en.pdf>`__ (PDF)
|
||
* `ESP32-WROVER Reference Design <https://www.espressif.com/en/support/download/documents?keys=ESP32-WROVER+Reference+Design>`_ containing OrCAD schematic, PCB layout, gerber and BOM files
|
||
|
||
|
||
ESP32-PICO-D4
|
||
-------------
|
||
|
||
ESP32-PICO-D4 is a System-in-Package (SiP) module, integrating all peripheral components seamlessly, including the following:
|
||
|
||
- 4 MB flash memory
|
||
- crystal oscillator
|
||
- filter capacitors
|
||
- RF matching circuit
|
||
|
||
For key characteristics, see `Espressif Products Ordering Information`_.
|
||
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* `ESP32-PICO-D4 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`__ (PDF)
|
||
|
||
|
||
Development Boards
|
||
==================
|
||
|
||
Depending on the intended functionality, different development boards feature:
|
||
|
||
- Access to different ESP32 GPIO pins.
|
||
- Different interfaces: USB, JTAG.
|
||
- Different peripherals: touchpads, LCD screens, SD card slots, female headers for camera modules, etc.
|
||
|
||
.. _esp-modules-and-boards-esp32-pico-kit:
|
||
|
||
ESP32-PICO-KIT V4.1
|
||
-------------------
|
||
|
||
This is the smallest available ESP32-based development board. It features all the components for direct connection to a computer's USB port as well as pin headers for plugging into a mini breadboard.
|
||
|
||
The board is equipped with the `ESP32-PICO-D4`_ module. With such a module, the creation of a fully functional development board required only a few external components that fit on a PCB as small as 20 x 52 mm. The external components include antenna, LDO, USB-UART bridge, and two buttons for reset and activation of Firmware Download mode.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-pico-kit-v4.1.jpg
|
||
:align: center
|
||
:alt: ESP32-PICO-KIT V4.1 board
|
||
:width: 50%
|
||
|
||
ESP32-PICO-KIT V4.1 board
|
||
|
||
Comparing to ESP32-PICO-KIT V4, this version features the CP2102N USB-UART bridge that provides faster transfer rates of up to 3 Mbps.
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* :doc:`esp32/get-started-pico-kit`
|
||
* `ESP32-PICO-KIT V4.1 Schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4.1_schematic.pdf>`_ (PDF)
|
||
* `ESP32-PICO-KIT Reference Design <https://www.espressif.com/en/support/download/documents?keys=ESP32-PICO-KIT+Reference+Design>`_ containing OrCAD schematic, PCB layout, gerber and BOM files
|
||
* `ESP32-PICO-D4 Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||
|
||
Previous Versions
|
||
^^^^^^^^^^^^^^^^^
|
||
|
||
* :ref:`esp-modules-and-boards-esp32-pico-kit-v4`
|
||
* :ref:`esp-modules-and-boards-esp32-pico-kit-v3`
|
||
|
||
|
||
.. _esp-modules-and-boards-esp32-devkitc:
|
||
|
||
ESP32 DevKitC V4
|
||
----------------
|
||
|
||
This is a small and convenient development board that features:
|
||
|
||
- :ref:`esp-modules-and-boards-esp32-wroom-32` module
|
||
- USB-to-serial programming interface that also provides power supply for the board
|
||
- pin headers
|
||
- pushbuttons for reset and activation of Firmware Download mode
|
||
- a few other components
|
||
|
||
Comparing to the previous :ref:`esp-modules-and-boards-esp32-devkitc-v2`, this version can integrate :ref:`esp-modules-and-boards-esp32-wrover` module instead of ESP32-WROOM-32 and has the CP2102N chip that supports faster baud rates.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-devkitc-v4-front.jpg
|
||
:align: center
|
||
:alt: ESP32 DevKitC V4 board
|
||
:width: 50%
|
||
|
||
ESP32 DevKitC V4 board
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* :doc:`esp32/get-started-devkitc`
|
||
* `ESP32-DevKitC schematic <https://dl.espressif.com/dl/schematics/esp32_devkitc_v4-sch-20180607a.pdf>`_ (PDF)
|
||
* `ESP32-DevKitC Reference Design <https://www.espressif.com/en/support/download/documents?keys=ESP32-DevKitC-V4+Reference+Design>`_ containing OrCAD schematic, PCB layout, gerber and BOM files
|
||
* `CP210x USB to UART Bridge VCP Drivers <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
|
||
|
||
Previous Versions
|
||
^^^^^^^^^^^^^^^^^
|
||
|
||
* :ref:`esp-modules-and-boards-esp32-devkitc-v2`
|
||
|
||
|
||
.. _esp-modules-and-boards-esp-wrover-kit:
|
||
|
||
ESP-WROVER-KIT V4.1
|
||
-------------------
|
||
|
||
This board features:
|
||
|
||
- Dual port USB-to-serial converter for programming
|
||
- JTAG interface for debugging
|
||
- MicroSD card slot
|
||
- 3.2” SPI LCD screen
|
||
- Female headers for a camera module
|
||
- RGB LED for diagnostics
|
||
- 32.768 kHz XTAL for internal RTC to operate it in low power modes
|
||
|
||
Power can be supplied either via USB or via a standard 5 mm power supply jack. A power source can be selected with a jumper and can be turned on/off with a separate switch.
|
||
|
||
This version of the ESP-WROVER-KIT board integrates the ESP-WROVER-B module that has 8 MB PSRAM for flexible extended storage and data processing capabilities. The board can accommodate other versions of ESP modules described in :ref:`esp-wroom-solo-wrover-modules`.
|
||
|
||
Comparing to :ref:`esp-modules-and-boards-esp-wrover-kit-v3`, this board has the following design changes:
|
||
|
||
- JP8, JP11, and JP13 have been combined into a single JP2.
|
||
- USB connector has been changed to DIP type and moved to the lower right corner of the board.
|
||
- R61 has been changed to a Zero-ohm resistor.
|
||
- Some components have been replaced with functional equivalents based on test results and sourcing options, e.g., the EN and Boot buttons.
|
||
|
||
.. figure:: https://dl.espressif.com/dl/schematics/pictures/esp-wrover-kit-v4.1-front.jpg
|
||
:align: center
|
||
:alt: ESP-WROVER-KIT V4.1 board
|
||
:width: 90%
|
||
|
||
ESP-WROVER-KIT V4.1 board
|
||
|
||
The board in the picture above integrates the ESP32-WROVER-B module.
|
||
|
||
Documentation
|
||
^^^^^^^^^^^^^
|
||
|
||
* :doc:`esp32/get-started-wrover-kit`
|
||
* `ESP-WROVER-KIT V4.1 Schematic <https://dl.espressif.com/dl/schematics/ESP-WROVER-KIT_V4_1.pdf>`__ (PDF)
|
||
* :doc:`../api-guides/jtag-debugging/index`
|
||
* `FTDI Virtual COM Port Drivers`_
|
||
|
||
Previous Versions
|
||
^^^^^^^^^^^^^^^^^
|
||
|
||
* :ref:`esp-modules-and-boards-esp-wrover-kit-v3`
|
||
* :ref:`esp-modules-and-boards-esp-wrover-kit-v2`
|
||
* :ref:`esp-modules-and-boards-esp-wrover-kit-v1`
|
||
|
||
|
||
.. _FTDI Virtual COM Port Drivers: http://www.ftdichip.com/Drivers/VCP.htm
|
||
.. _Espressif Products Ordering Information: https://www.espressif.com/sites/default/files/documentation/espressif_products_ordering_information_en.pdf |