esp-idf/components/hal/esp32h2/efuse_hal.c
KonstantinKondrashov e48130246a hal: Explicit setting of efuse time settings
EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000
2023-05-10 00:41:35 +08:00

100 lines
2.6 KiB
C

/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <sys/param.h>
#include "soc/soc_caps.h"
#include "hal/assert.h"
#include "hal/efuse_hal.h"
#include "hal/efuse_ll.h"
#define ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block) ((error_reg) & (0x08 << (4 * (block))))
#define ESP_EFUSE_BLOCK_ERROR_NUM_BITS(error_reg, block) ((error_reg) & (0x07 << (4 * (block))))
uint32_t efuse_hal_get_major_chip_version(void)
{
#ifdef CONFIG_ESP_REV_NEW_CHIP_TEST
return CONFIG_ESP_REV_MIN_FULL / 100;
#else
return efuse_ll_get_chip_wafer_version_major();
#endif
}
uint32_t efuse_hal_get_minor_chip_version(void)
{
#ifdef CONFIG_ESP_REV_NEW_CHIP_TEST
return CONFIG_ESP_REV_MIN_FULL % 100;
#else
return efuse_ll_get_chip_wafer_version_minor();
#endif
}
/******************* eFuse control functions *************************/
void efuse_hal_set_timing(uint32_t apb_freq_hz)
{
(void) apb_freq_hz;
efuse_ll_set_dac_num(0xFF);
efuse_ll_set_dac_clk_div(0x28);
efuse_ll_set_pwr_on_num(0x3000);
efuse_ll_set_pwr_off_num(0x190);
}
void efuse_hal_read(void)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_read_op_code();
efuse_ll_set_read_cmd();
while (efuse_ll_get_read_cmd() != 0) { }
/*Due to a hardware error, we have to read READ_CMD again to make sure the efuse clock is normal*/
while (efuse_ll_get_read_cmd() != 0) { }
}
void efuse_hal_clear_program_registers(void)
{
ets_efuse_clear_program_registers();
}
void efuse_hal_program(uint32_t block)
{
efuse_hal_set_timing(0);
efuse_ll_set_conf_write_op_code();
efuse_ll_set_pgm_cmd(block);
while (efuse_ll_get_pgm_cmd() != 0) { }
efuse_hal_clear_program_registers();
efuse_hal_read();
}
void efuse_hal_rs_calculate(const void *data, void *rs_values)
{
ets_efuse_rs_calculate(data, rs_values);
}
/******************* eFuse control functions *************************/
bool efuse_hal_is_coding_error_in_block(unsigned block)
{
if (block == 0) {
for (unsigned i = 0; i < 5; i++) {
if (REG_READ(EFUSE_RD_REPEAT_ERR0_REG + i * 4)) {
return true;
}
}
} else if (block <= 10) {
// EFUSE_RD_RS_ERR0_REG: (hi) BLOCK8, BLOCK7, BLOCK6, BLOCK5, BLOCK4, BLOCK3, BLOCK2, BLOCK1 (low)
// EFUSE_RD_RS_ERR1_REG: BLOCK10, BLOCK9
block--;
uint32_t error_reg = REG_READ(EFUSE_RD_RS_ERR0_REG + (block / 8) * 4);
return ESP_EFUSE_BLOCK_ERROR_BITS(error_reg, block % 8) != 0;
}
return false;
}