esp-idf/docs/en/api-reference/protocols/mqtt.rst

162 lines
8.2 KiB
ReStructuredText

ESP-MQTT
========
Overview
--------
ESP-MQTT is an implementation of MQTT protocol client (MQTT is a lightweight publish/subscribe messaging protocol).
Features
--------
* Supports MQTT over TCP, SSL with mbedtls, MQTT over Websocket, MQTT over Websocket Secure.
* Easy to setup with URI
* Multiple instances (Multiple clients in one application)
* Support subscribing, publishing, authentication, last will messages, keep alive pings and all 3 QoS levels (it should be a fully functional client).
Application Example
-------------------
* :example:`protocols/mqtt/tcp`: MQTT over tcp, default port 1883
* :example:`protocols/mqtt/ssl`: MQTT over tcp, default port 8883
* :example:`protocols/mqtt/ssl_psk`: MQTT over tcp using pre-shared keys for authentication, default port 8883
* :example:`protocols/mqtt/ws`: MQTT over Websocket, default port 80
* :example:`protocols/mqtt/wss`: MQTT over Websocket Secure, default port 443
Configuration
-------------
URI
^^^
- Curently support ``mqtt``, ``mqtts``, ``ws``, ``wss`` schemes
- MQTT over TCP samples:
- ``mqtt://mqtt.eclipseprojects.io``: MQTT over TCP, default port 1883:
- ``mqtt://mqtt.eclipseprojects.io:1884`` MQTT over TCP, port 1884:
- ``mqtt://username:password@mqtt.eclipseprojects.io:1884`` MQTT over TCP,
port 1884, with username and password
- MQTT over SSL samples:
- ``mqtts://mqtt.eclipseprojects.io``: MQTT over SSL, port 8883
- ``mqtts://mqtt.eclipseprojects.io:8884``: MQTT over SSL, port 8884
- MQTT over Websocket samples:
- ``ws://mqtt.eclipseprojects.io:80/mqtt``
- MQTT over Websocket Secure samples:
- ``wss://mqtt.eclipseprojects.io:443/mqtt``
- Minimal configurations:
.. code:: c
const esp_mqtt_client_config_t mqtt_cfg = {
.uri = "mqtt://mqtt.eclipseprojects.io",
// .user_context = (void *)your_context
};
esp_mqtt_client_handle_t client = esp_mqtt_client_init(&mqtt_cfg);
esp_mqtt_client_register_event(client, ESP_EVENT_ANY_ID, mqtt_event_handler, client);
esp_mqtt_client_start(client);
- Note: By default mqtt client uses event loop library to post related mqtt events (connected, subscribed, published, etc.)
SSL
^^^
- Get certificate from server, example: ``mqtt.eclipseprojects.io``
``openssl s_client -showcerts -connect mqtt.eclipseprojects.io:8883 </dev/null 2>/dev/null|openssl x509 -outform PEM >mqtt_eclipse_org.pem``
- Check the sample application: ``examples/mqtt_ssl``
- Configuration:
.. code:: c
const esp_mqtt_client_config_t mqtt_cfg = {
.uri = "mqtts://mqtt.eclipseprojects.io:8883",
.event_handle = mqtt_event_handler,
.cert_pem = (const char *)mqtt_eclipse_org_pem_start,
};
If the certificate is not null-terminated then ``cert_len`` should also be set.
Other SSL related configuration parameters are:
* ``use_global_ca_store``: use the global certificate store to verify server certificate, see ``esp-tls.h`` for more information
* ``client_cert_pem``: pointer to certificate data in PEM or DER format for SSL mutual authentication, default is NULL, not required if mutual authentication is not needed.
* ``client_cert_len``: length of the buffer pointed to by client_cert_pem. May be 0 for null-terminated pem.
* ``client_key_pem``: pointer to private key data in PEM or DER format for SSL mutual authentication, default is NULL, not required if mutual authentication is not needed.
* ``client_key_len``: length of the buffer pointed to by client_key_pem. May be 0 for null-terminated pem.
* ``psk_hint_key``: pointer to PSK struct defined in esp_tls.h to enable PSK authentication (as alternative to certificate verification). If not NULL and server/client certificates are NULL, PSK is enabled
* ``alpn_protos``: NULL-terminated list of protocols to be used for ALPN.
Last Will and Testament
^^^^^^^^^^^^^^^^^^^^^^^
MQTT allows for a last will and testament (LWT) message to notify other clients when a client ungracefully disconnects. This is configured by the following fields
in the ``esp_mqtt_client_config_t``-struct.
* ``lwt_topic``: pointer to the LWT message topic
* ``lwt_msg``: pointer to the LWT message
* ``lwt_msg_len``: length of the LWT message, required if ``lwt_msg`` is not null-terminated
* ``lwt_qos``: quality of service for the LWT message
* ``lwt_retain``: specifies the retain flag of the LWT message
Other Configuration Parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* ``disable_clean_session``: determines the clean session flag for the connect message, defaults to a clean session
* ``keepalive``: determines how many seconds the client will wait for a ping response before disconnecting, default is 120 seconds.
* ``disable_auto_reconnect``: enable to stop the client from reconnecting to server after errors or disconnects
* ``user_context``: custom context that will be passed to the event handler
* ``task_prio``: MQTT task priority, defaults to 5
* ``task_stack``: MQTT task stack size, defaults to 6144 bytes, setting this will override setting from menuconfig
* ``buffer_size``: size of MQTT send/receive buffer, default is 1024 bytes
* ``username``: pointer to the username used for connecting to the broker
* ``password``: pointer to the password used for connecting to the broker
* ``client_id``: pointer to the client id, defaults to ``ESP32_%CHIPID%`` where %CHIPID% are the last 3 bytes of MAC address in hex format
* ``host``: MQTT broker domain (ipv4 as string), setting the uri will override this
* ``port``: MQTT broker port, specifying the port in the uri will override this
* ``transport``: sets the transport protocol, setting the uri will override this
* ``refresh_connection_after_ms``: refresh connection after this value (in milliseconds)
* ``event_handle``: handle for MQTT events as a callback in legacy mode
* ``event_loop_handle``: handle for MQTT event loop library
For more options on ``esp_mqtt_client_config_t``, please refer to API reference below
Change settings in Project Configuration Menu
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The settings for MQTT can be found using ``idf.py menuconfig``, under Component config -> ESP-MQTT Configuration
The following settings are available:
- :ref:`CONFIG_MQTT_PROTOCOL_311`: Enables 3.1.1 version of MQTT protocol
- :ref:`CONFIG_MQTT_TRANSPORT_SSL`, :ref:`CONFIG_MQTT_TRANSPORT_WEBSOCKET`: Enables specific MQTT transport layer, such as SSL, WEBSOCKET, WEBSOCKET_SECURE
- :ref:`CONFIG_MQTT_CUSTOM_OUTBOX`: Disables default implementation of mqtt_outbox, so a specific implementaion can be supplied
Events
------
The following events may be posted by the MQTT client:
* ``MQTT_EVENT_BEFORE_CONNECT``: The client is initialized and about to start connecting to the broker.
* ``MQTT_EVENT_CONNECTED``: The client has successfully established a connection to the broker. The client is now ready to send and receive data.
* ``MQTT_EVENT_DISCONNECTED``: The client has aborted the connection due to being unable to read or write data, e.g. because the server is unavailable.
* ``MQTT_EVENT_SUBSCRIBED``: The broker has acknowledged the client's subscribe request. The event data will contain the message ID of the subscribe message.
* ``MQTT_EVENT_UNSUBSCRIBED``: The broker has acknowledged the client's unsubscribe request. The event data will contain the message ID of the unsubscribe message.
* ``MQTT_EVENT_PUBLISHED``: The broker has acknowledged the client's publish message. This will only be posted for Quality of Service level 1 and 2, as level 0 does not use acknowledgements. The event data will contain the message ID of the publish message.
* ``MQTT_EVENT_DATA``: The client has received a publish message. The event data contains: message ID, name of the topic it was published to, received data and its length. For data that exceeds the internal buffer multiple `MQTT_EVENT_DATA` will be posted and `current_data_offset` and `total_data_len` from event data updated to keep track of the fragmented message.
* ``MQTT_EVENT_ERROR``: The client has encountered an error. `esp_mqtt_error_type_t` from `error_handle` in the event data can be used to further determine the type of the error. The type of error will determine which parts of the `error_handle` struct is filled.
API Reference
-------------
.. include-build-file:: inc/mqtt_client.inc