esp-idf/components/esp_system/ld/esp32h2/memory.ld.in
KonstantinKondrashov 6d0d2366f7 esp_hw_support: Fix invalid system time if s_esp_rtc_time_us & s_rtc_last_ticks were moved around
The commit fixes the case:
If variables in RTC RAM have been moved around by the linker,
they will be filled with garbage data. Any reset other than OTA would work fine
because the variables would still be initialized from the initial bootup.

So now system time will be valid even after OTA.

Closes https://github.com/espressif/esp-idf/issues/9448
2023-06-26 18:12:30 +08:00

135 lines
4.9 KiB
Plaintext

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* ESP32-H2 Linker Script Memory Layout
* This file describes the memory layout (memory blocks) by virtual memory addresses.
* This linker script is passed through the C preprocessor to include configuration options.
* Please use preprocessor features sparingly!
* Restrict to simple macros with numeric values, and/or #if/#endif blocks.
*/
#include "sdkconfig.h"
#include "ld.common"
/**
* physical memory is mapped twice to the vritual address (IRAM and DRAM).
* `I_D_SRAM_OFFSET` is the offset between the two locations of the same physical memory
*/
#define SRAM_IRAM_START 0x40800000
#define SRAM_DRAM_START 0x40800000
#define I_D_SRAM_OFFSET (SRAM_IRAM_START - SRAM_DRAM_START)
#define SRAM_DRAM_END 0x4083EFD0 - I_D_SRAM_OFFSET /* 2nd stage bootloader iram_loader_seg start address */
#define SRAM_IRAM_ORG (SRAM_IRAM_START)
#define SRAM_DRAM_ORG (SRAM_DRAM_START)
#define I_D_SRAM_SIZE SRAM_DRAM_END - SRAM_DRAM_ORG
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/*
* IDRAM0_2_SEG_SIZE_DEFAULT is used when page size is 64KB
*/
#define IDRAM0_2_SEG_SIZE (CONFIG_MMU_PAGE_SIZE << 8)
#endif
#define DRAM0_0_SEG_LEN I_D_SRAM_SIZE
MEMORY
{
/**
* All these values assume the flash cache is on, and have the blocks this uses subtracted from the length
* of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but
* are connected to the data port of the CPU and eg allow byte-wise access.
*/
/* IRAM for PRO CPU. */
iram0_0_seg (RX) : org = SRAM_IRAM_ORG, len = I_D_SRAM_SIZE
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped instruction data */
irom_seg (RX) : org = 0x42000020, len = IDRAM0_2_SEG_SIZE - 0x20
/**
* (0x20 offset above is a convenience for the app binary image generation.
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
* header. Setting this offset makes it simple to meet the flash cache MMU's
* constraint that (paddr % 64KB == vaddr % 64KB).)
*/
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
* Enabling Bluetooth & Trace Memory features in menuconfig will decrease the amount of RAM available.
*/
dram0_0_seg (RW) : org = SRAM_DRAM_ORG, len = DRAM0_0_SEG_LEN
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/* Flash mapped constant data */
drom_seg (R) : org = 0x42000020, len = IDRAM0_2_SEG_SIZE - 0x20
/* (See irom_seg for meaning of 0x20 offset in the above.) */
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* lp ram memory (RWX). Persists over deep sleep. // ESP32H2-TODO IDF-6272
*/
lp_ram_seg(RW) : org = 0x50000000, len = 0x1000 - RESERVE_RTC_MEM
/* We reduced the size of lp_ram_seg by RESERVE_RTC_MEM value.
It reserves the amount of LP memory that we use for this memory segment.
This segment is intended for keeping:
- (lower addr) rtc timer data (s_rtc_timer_retain_mem, see esp_clk.c files).
- (higher addr) bootloader rtc data (s_bootloader_retain_mem, when a Kconfig option is on).
The aim of this is to keep data that will not be moved around and have a fixed address.
*/
lp_reserved_seg(RW) : org = 0x50000000 + 0x1000 - RESERVE_RTC_MEM, len = RESERVE_RTC_MEM
}
/* Heap ends at top of dram0_0_seg */
_heap_end = 0x40000000;
_data_seg_org = ORIGIN(rtc_data_seg);
/**
* The lines below define location alias for .rtc.data section
* As C3 only has RTC fast memory, this is not configurable like on other targets
*/
REGION_ALIAS("rtc_iram_seg", lp_ram_seg );
REGION_ALIAS("rtc_data_seg", rtc_iram_seg );
REGION_ALIAS("rtc_slow_seg", rtc_iram_seg );
REGION_ALIAS("rtc_data_location", rtc_iram_seg );
REGION_ALIAS("rtc_reserved_seg", lp_reserved_seg );
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_code_seg", irom_seg);
#else
REGION_ALIAS("default_code_seg", iram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
REGION_ALIAS("default_rodata_seg", drom_seg);
#else
REGION_ALIAS("default_rodata_seg", dram0_0_seg);
#endif // CONFIG_APP_BUILD_USE_FLASH_SECTIONS
/**
* If rodata default segment is placed in `drom_seg`, then flash's first rodata section must
* also be first in the segment.
*/
#if CONFIG_APP_BUILD_USE_FLASH_SECTIONS
ASSERT(_flash_rodata_dummy_start == ORIGIN(default_rodata_seg),
".flash_rodata_dummy section must be placed at the beginning of the rodata segment.")
#endif
#if CONFIG_ESP_SYSTEM_USE_EH_FRAME
ASSERT ((__eh_frame_end > __eh_frame), "Error: eh_frame size is null!");
ASSERT ((__eh_frame_hdr_end > __eh_frame_hdr), "Error: eh_frame_hdr size is null!");
#endif