esp-idf/components/hal/esp32c3/include/hal/sha_ll.h
Angus Gratton 27a9cf861e driver: Add esp32c3 drivers (except ADC/DAC) and update tests
Some ESP32-C3 drivers are still pending.

Based on internal commit 3ef01301fffa552d4be6d81bc9d199c223224305
2020-12-23 09:53:24 +11:00

158 lines
4.1 KiB
C

// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdbool.h>
#include "soc/hwcrypto_reg.h"
#include "hal/sha_types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Start a new SHA block conversions (no initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_start_block(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_START_REG, 1);
}
/**
* @brief Continue a SHA block conversion (initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_continue_block(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_CONTINUE_REG, 1);
}
/**
* @brief Start a new SHA message conversion using DMA (no initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_start_dma(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_DMA_START_REG, 1);
}
/**
* @brief Continue a SHA message conversion using DMA (initial hash in HW)
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_continue_dma(esp_sha_type sha_type)
{
REG_WRITE(SHA_MODE_REG, sha_type);
REG_WRITE(SHA_DMA_CONTINUE_REG, 1);
}
/**
* @brief Load the current hash digest to digest register
*
* @note Happens automatically on ESP32S3
*
* @param sha_type The SHA algorithm type
*/
static inline void sha_ll_load(esp_sha_type sha_type)
{
}
/**
* @brief Sets the number of message blocks to be hashed
*
* @note DMA operation only
*
* @param num_blocks Number of message blocks to process
*/
static inline void sha_ll_set_block_num(size_t num_blocks)
{
REG_WRITE(SHA_BLOCK_NUM_REG, num_blocks);
}
/**
* @brief Checks if the SHA engine is currently busy hashing a block
*
* @return true SHA engine busy
* @return false SHA engine idle
*/
static inline bool sha_ll_busy(void)
{
return REG_READ(SHA_BUSY_REG);
}
/**
* @brief Write a text (message) block to the SHA engine
*
* @param input_text Input buffer to be written to the SHA engine
* @param block_word_len Number of words in block
*/
static inline void sha_ll_fill_text_block(const void *input_text, size_t block_word_len)
{
uint32_t *data_words = (uint32_t *)input_text;
uint32_t *reg_addr_buf = (uint32_t *)(SHA_TEXT_BASE);
for (int i = 0; i < block_word_len; i++) {
REG_WRITE(&reg_addr_buf[i], data_words[i]);
}
}
/**
* @brief Read the message digest from the SHA engine
*
* @param sha_type The SHA algorithm type
* @param digest_state Buffer that message digest will be written to
* @param digest_word_len Length of the message digest
*/
static inline void sha_ll_read_digest(esp_sha_type sha_type, void *digest_state, size_t digest_word_len)
{
uint32_t *digest_state_words = (uint32_t *)digest_state;
const size_t REG_WIDTH = sizeof(uint32_t);
for (size_t i = 0; i < digest_word_len; i++) {
digest_state_words[i] = REG_READ(SHA_H_BASE + (i * REG_WIDTH));
}
}
/**
* @brief Write the message digest to the SHA engine
*
* @param sha_type The SHA algorithm type
* @param digest_state Message digest to be written to SHA engine
* @param digest_word_len Length of the message digest
*/
static inline void sha_ll_write_digest(esp_sha_type sha_type, void *digest_state, size_t digest_word_len)
{
uint32_t *digest_state_words = (uint32_t *)digest_state;
uint32_t *reg_addr_buf = (uint32_t *)(SHA_H_BASE);
for (int i = 0; i < digest_word_len; i++) {
REG_WRITE(&reg_addr_buf[i], digest_state_words[i]);
}
}
#ifdef __cplusplus
}
#endif