esp-idf/components/driver/esp32s2/include/driver/temp_sensor.h
fuzhibo baa7898e35 driver(adc/dac): fix adc dac driver for esp32s2
1. update register file about adc; 2. fix adc driver; 3. add UT for adc/dac;

See merge request espressif/esp-idf!7776
2020-04-01 12:41:51 +08:00

106 lines
3.0 KiB
C

// Copyright 2010-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief temperature sensor range option.
*/
typedef enum {
TSENS_DAC_L0 = 0, /*!< offset = -2, measure range: 50℃ ~ 125℃, error < 3℃. */
TSENS_DAC_L1, /*!< offset = -1, measure range: 20℃ ~ 100℃, error < 2℃. */
TSENS_DAC_L2, /*!< offset = 0, measure range:-10℃ ~ 80℃, error < 1℃. */
TSENS_DAC_L3, /*!< offset = 1, measure range:-30℃ ~ 50℃, error < 2℃. */
TSENS_DAC_L4, /*!< offset = 2, measure range:-40℃ ~ 20℃, error < 3℃. */
TSENS_DAC_MAX,
TSENS_DAC_DEFAULT = TSENS_DAC_L2,
} temp_sensor_dac_offset_t;
/**
* @brief Configuration for temperature sensor reading
*/
typedef struct {
temp_sensor_dac_offset_t dac_offset; /*!< The temperature measurement range is configured with a built-in temperature offset DAC. */
uint8_t clk_div; /*!< Default: 6 */
} temp_sensor_config_t;
/**
* @brief temperature sensor default setting.
*/
#define TSENS_CONFIG_DEFAULT() {.dac_offset = TSENS_DAC_L2, \
.clk_div = 6}
/**
* @brief Set parameter of temperature sensor.
* @param tsens
* @return
* - ESP_OK Success
*/
esp_err_t temp_sensor_set_config(temp_sensor_config_t tsens);
/**
* @brief Get parameter of temperature sensor.
* @param tsens
* @return
* - ESP_OK Success
*/
esp_err_t temp_sensor_get_config(temp_sensor_config_t *tsens);
/**
* @brief Start temperature sensor measure.
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG
*/
esp_err_t temp_sensor_start(void);
/**
* @brief Stop temperature sensor measure.
* @return
* - ESP_OK Success
*/
esp_err_t temp_sensor_stop(void);
/**
* @brief Read temperature sensor raw data.
* @param tsens_out Pointer to raw data, Range: 0 ~ 255
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG `tsens_out` is NULL
* - ESP_ERR_INVALID_STATE temperature sensor dont start
*/
esp_err_t temp_sensor_read_raw(uint32_t *tsens_out);
/**
* @brief Read temperature sensor data that is converted to degrees Celsius.
* @note Should not be called from interrupt.
* @param celsius The measure output value.
* @return
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG ARG is NULL.
* - ESP_ERR_INVALID_STATE The ambient temperature is out of range.
*/
esp_err_t temp_sensor_read_celsius(float *celsius);
#ifdef __cplusplus
}
#endif