mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
340 lines
17 KiB
C
340 lines
17 KiB
C
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#pragma once
|
|
|
|
#ifndef __ASSEMBLER__
|
|
#include <stdint.h>
|
|
#include "esp_assert.h"
|
|
#include "esp_bit_defs.h"
|
|
#endif
|
|
|
|
#include "sdkconfig.h"
|
|
|
|
#define PRO_CPU_NUM (0)
|
|
|
|
#define DR_REG_SYSTEM_BASE 0x600c0000
|
|
#define DR_REG_SENSITIVE_BASE 0x600c1000
|
|
#define DR_REG_INTERRUPT_BASE 0x600c2000
|
|
#define DR_REG_EXTMEM_BASE 0x600c4000
|
|
#define DR_REG_MMU_TABLE 0x600c5000
|
|
#define DR_REG_AES_BASE 0x6003a000
|
|
#define DR_REG_SHA_BASE 0x6003b000
|
|
#define DR_REG_RSA_BASE 0x6003c000
|
|
#define DR_REG_HMAC_BASE 0x6003e000
|
|
#define DR_REG_DIGITAL_SIGNATURE_BASE 0x6003d000
|
|
#define DR_REG_GDMA_BASE 0x6003f000
|
|
#define DR_REG_ASSIST_DEBUG_BASE 0x600ce000
|
|
#define DR_REG_DEDICATED_GPIO_BASE 0x600cf000
|
|
#define DR_REG_WORLD_CNTL_BASE 0x600d0000
|
|
#define DR_REG_DPORT_END 0x600d3FFC
|
|
#define DR_REG_UART_BASE 0x60000000
|
|
#define DR_REG_SPI1_BASE 0x60002000
|
|
#define DR_REG_SPI0_BASE 0x60003000
|
|
#define DR_REG_GPIO_BASE 0x60004000
|
|
#define DR_REG_FE2_BASE 0x60005000
|
|
#define DR_REG_FE_BASE 0x60006000
|
|
#define DR_REG_RTCCNTL_BASE 0x60008000
|
|
#define DR_REG_IO_MUX_BASE 0x60009000
|
|
#define DR_REG_RTC_I2C_BASE 0x6000e000
|
|
#define DR_REG_UART1_BASE 0x60010000
|
|
#define DR_REG_I2C_EXT_BASE 0x60013000
|
|
#define DR_REG_UHCI0_BASE 0x60014000
|
|
#define DR_REG_RMT_BASE 0x60016000
|
|
#define DR_REG_LEDC_BASE 0x60019000
|
|
#define DR_REG_EFUSE_BASE 0x60008800
|
|
#define DR_REG_NRX_BASE 0x6001CC00
|
|
#define DR_REG_BB_BASE 0x6001D000
|
|
#define DR_REG_TIMERGROUP0_BASE 0x6001F000
|
|
#define DR_REG_TIMERGROUP1_BASE 0x60020000
|
|
#define DR_REG_SYSTIMER_BASE 0x60023000
|
|
#define DR_REG_SPI2_BASE 0x60024000
|
|
#define DR_REG_SYSCON_BASE 0x60026000
|
|
#define DR_REG_APB_CTRL_BASE 0x60026000 /* Old name for SYSCON, to be removed */
|
|
#define DR_REG_TWAI_BASE 0x6002B000
|
|
#define DR_REG_I2S0_BASE 0x6002D000
|
|
#define DR_REG_APB_SARADC_BASE 0x60040000
|
|
#define DR_REG_USB_SERIAL_JTAG_BASE 0x60043000
|
|
#define DR_REG_AES_XTS_BASE 0x600CC000
|
|
|
|
#define REG_UHCI_BASE(i) (DR_REG_UHCI0_BASE - (i) * 0x8000)
|
|
#define REG_UART_BASE(i) (DR_REG_UART_BASE + (i) * 0x10000)
|
|
#define REG_UART_AHB_BASE(i) (0x60000000 + (i) * 0x10000)
|
|
#define UART_FIFO_AHB_REG(i) (REG_UART_AHB_BASE(i) + 0x0)
|
|
#define REG_I2S_BASE(i) (DR_REG_I2S_BASE + (i) * 0x1E000)
|
|
#define REG_TIMG_BASE(i) (DR_REG_TIMERGROUP0_BASE + (i)*0x1000)
|
|
#define REG_SPI_MEM_BASE(i) (DR_REG_SPI0_BASE - (i) * 0x1000)
|
|
#define REG_I2C_BASE(i) (DR_REG_I2C_EXT_BASE + (i) * 0x14000 )
|
|
|
|
//Registers Operation {{
|
|
#define ETS_UNCACHED_ADDR(addr) (addr)
|
|
#define ETS_CACHED_ADDR(addr) (addr)
|
|
|
|
#ifndef __ASSEMBLER__
|
|
#define BIT(nr) (1UL << (nr))
|
|
#else
|
|
#define BIT(nr) (1 << (nr))
|
|
#endif
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
//write value to register
|
|
#define REG_WRITE(_r, _v) ({ \
|
|
(*(volatile uint32_t *)(_r)) = (_v); \
|
|
})
|
|
|
|
//read value from register
|
|
#define REG_READ(_r) ({ \
|
|
(*(volatile uint32_t *)(_r)); \
|
|
})
|
|
|
|
//get bit or get bits from register
|
|
#define REG_GET_BIT(_r, _b) ({ \
|
|
(*(volatile uint32_t*)(_r) & (_b)); \
|
|
})
|
|
|
|
//set bit or set bits to register
|
|
#define REG_SET_BIT(_r, _b) ({ \
|
|
(*(volatile uint32_t*)(_r) |= (_b)); \
|
|
})
|
|
|
|
//clear bit or clear bits of register
|
|
#define REG_CLR_BIT(_r, _b) ({ \
|
|
(*(volatile uint32_t*)(_r) &= ~(_b)); \
|
|
})
|
|
|
|
//set bits of register controlled by mask
|
|
#define REG_SET_BITS(_r, _b, _m) ({ \
|
|
(*(volatile uint32_t*)(_r) = (*(volatile uint32_t*)(_r) & ~(_m)) | ((_b) & (_m))); \
|
|
})
|
|
|
|
//get field from register, uses field _S & _V to determine mask
|
|
#define REG_GET_FIELD(_r, _f) ({ \
|
|
((REG_READ(_r) >> (_f##_S)) & (_f##_V)); \
|
|
})
|
|
|
|
//set field of a register from variable, uses field _S & _V to determine mask
|
|
#define REG_SET_FIELD(_r, _f, _v) ({ \
|
|
(REG_WRITE((_r),((REG_READ(_r) & ~((_f##_V) << (_f##_S)))|(((_v) & (_f##_V))<<(_f##_S))))); \
|
|
})
|
|
|
|
//get field value from a variable, used when _f is not left shifted by _f##_S
|
|
#define VALUE_GET_FIELD(_r, _f) (((_r) >> (_f##_S)) & (_f))
|
|
|
|
//get field value from a variable, used when _f is left shifted by _f##_S
|
|
#define VALUE_GET_FIELD2(_r, _f) (((_r) & (_f))>> (_f##_S))
|
|
|
|
//set field value to a variable, used when _f is not left shifted by _f##_S
|
|
#define VALUE_SET_FIELD(_r, _f, _v) ((_r)=(((_r) & ~((_f) << (_f##_S)))|((_v)<<(_f##_S))))
|
|
|
|
//set field value to a variable, used when _f is left shifted by _f##_S
|
|
#define VALUE_SET_FIELD2(_r, _f, _v) ((_r)=(((_r) & ~(_f))|((_v)<<(_f##_S))))
|
|
|
|
//generate a value from a field value, used when _f is not left shifted by _f##_S
|
|
#define FIELD_TO_VALUE(_f, _v) (((_v)&(_f))<<_f##_S)
|
|
|
|
//generate a value from a field value, used when _f is left shifted by _f##_S
|
|
#define FIELD_TO_VALUE2(_f, _v) (((_v)<<_f##_S) & (_f))
|
|
|
|
//read value from register
|
|
#define READ_PERI_REG(addr) ({ \
|
|
(*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr))); \
|
|
})
|
|
|
|
//write value to register
|
|
#define WRITE_PERI_REG(addr, val) ({ \
|
|
(*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr))) = (uint32_t)(val); \
|
|
})
|
|
|
|
//clear bits of register controlled by mask
|
|
#define CLEAR_PERI_REG_MASK(reg, mask) ({ \
|
|
WRITE_PERI_REG((reg), (READ_PERI_REG(reg)&(~(mask)))); \
|
|
})
|
|
|
|
//set bits of register controlled by mask
|
|
#define SET_PERI_REG_MASK(reg, mask) ({ \
|
|
WRITE_PERI_REG((reg), (READ_PERI_REG(reg)|(mask))); \
|
|
})
|
|
|
|
//get bits of register controlled by mask
|
|
#define GET_PERI_REG_MASK(reg, mask) ({ \
|
|
(READ_PERI_REG(reg) & (mask)); \
|
|
})
|
|
|
|
//get bits of register controlled by highest bit and lowest bit
|
|
#define GET_PERI_REG_BITS(reg, hipos,lowpos) ({ \
|
|
((READ_PERI_REG(reg)>>(lowpos))&((1<<((hipos)-(lowpos)+1))-1)); \
|
|
})
|
|
|
|
//set bits of register controlled by mask and shift
|
|
#define SET_PERI_REG_BITS(reg,bit_map,value,shift) ({ \
|
|
(WRITE_PERI_REG((reg),(READ_PERI_REG(reg)&(~((bit_map)<<(shift))))|(((value) & bit_map)<<(shift)) )); \
|
|
})
|
|
|
|
//get field of register
|
|
#define GET_PERI_REG_BITS2(reg, mask,shift) ({ \
|
|
((READ_PERI_REG(reg)>>(shift))&(mask)); \
|
|
})
|
|
|
|
#endif /* !__ASSEMBLER__ */
|
|
//}}
|
|
|
|
//Periheral Clock {{
|
|
#define APB_CLK_FREQ_ROM ( 40*1000000 )
|
|
#define CPU_CLK_FREQ_ROM APB_CLK_FREQ_ROM
|
|
#define UART_CLK_FREQ_ROM ( 40*1000000)
|
|
#define EFUSE_CLK_FREQ_ROM ( 20*1000000)
|
|
#define CPU_CLK_FREQ APB_CLK_FREQ
|
|
#if CONFIG_IDF_ENV_FPGA
|
|
#define APB_CLK_FREQ ( 40*1000000 )
|
|
#else
|
|
#define APB_CLK_FREQ ( 80*1000000 )
|
|
#endif
|
|
#define REF_CLK_FREQ ( 1000000 )
|
|
#define RTC_CLK_FREQ (20*1000000)
|
|
#define XTAL_CLK_FREQ (40*1000000)
|
|
#define UART_CLK_FREQ APB_CLK_FREQ
|
|
#define WDT_CLK_FREQ APB_CLK_FREQ
|
|
#define TIMER_CLK_FREQ (80000000>>4) //80MHz divided by 16
|
|
#define SPI_CLK_DIV 4
|
|
#define TICKS_PER_US_ROM 40 // CPU is 80MHz
|
|
#define GPIO_MATRIX_DELAY_NS 0
|
|
//}}
|
|
|
|
/* Overall memory map */
|
|
#define SOC_DROM_LOW 0x3C000000
|
|
#define SOC_DROM_HIGH 0x3C800000
|
|
#define SOC_IROM_LOW 0x42000000
|
|
#define SOC_IROM_HIGH 0x42800000
|
|
#define SOC_IROM_MASK_LOW 0x40000000
|
|
#define SOC_IROM_MASK_HIGH 0x40060000
|
|
#define SOC_DROM_MASK_LOW 0x3FF00000
|
|
#define SOC_DROM_MASK_HIGH 0x3FF20000
|
|
#define SOC_IRAM_LOW 0x4037C000
|
|
#define SOC_IRAM_HIGH 0x403E0000
|
|
#define SOC_DRAM_LOW 0x3FC80000
|
|
#define SOC_DRAM_HIGH 0x3FCE0000
|
|
#define SOC_RTC_IRAM_LOW 0x50000000 // ESP32-C3 only has RTC slow memory
|
|
#define SOC_RTC_IRAM_HIGH 0x50002000
|
|
#define SOC_RTC_DRAM_LOW 0x50000000
|
|
#define SOC_RTC_DRAM_HIGH 0x50002000
|
|
#define SOC_RTC_DATA_LOW 0x50000000
|
|
#define SOC_RTC_DATA_HIGH 0x50002000
|
|
|
|
//First and last words of the D/IRAM region, for both the DRAM address as well as the IRAM alias.
|
|
#define SOC_DIRAM_IRAM_LOW 0x40380000
|
|
#define SOC_DIRAM_IRAM_HIGH 0x403E0000
|
|
#define SOC_DIRAM_DRAM_LOW 0x3FC80000
|
|
#define SOC_DIRAM_DRAM_HIGH 0x3FCE0000
|
|
|
|
// Region of memory accessible via DMA. See esp_ptr_dma_capable().
|
|
#define SOC_DMA_LOW 0x3FC88000
|
|
#define SOC_DMA_HIGH 0x3FD00000
|
|
|
|
// Region of RAM that is byte-accessible. See esp_ptr_byte_accessible().
|
|
#define SOC_BYTE_ACCESSIBLE_LOW 0x3FC88000
|
|
#define SOC_BYTE_ACCESSIBLE_HIGH 0x3FD00000
|
|
|
|
//Region of memory that is internal, as in on the same silicon die as the ESP32 CPUs
|
|
//(excluding RTC data region, that's checked separately.) See esp_ptr_internal().
|
|
#define SOC_MEM_INTERNAL_LOW 0x3FC80000
|
|
#define SOC_MEM_INTERNAL_HIGH 0x3FCE0000
|
|
#define SOC_MEM_INTERNAL_LOW1 0x40370000
|
|
#define SOC_MEM_INTERNAL_HIGH1 0x403E0000
|
|
#define SOC_MEM_INTERNAL_LOW2 0x600FE000
|
|
#define SOC_MEM_INTERNAL_HIGH2 0x60100000
|
|
|
|
#define SOC_MAX_CONTIGUOUS_RAM_SIZE (SOC_IRAM_HIGH - SOC_IRAM_LOW) ///< Largest span of contiguous memory (DRAM or IRAM) in the address space
|
|
|
|
// Region of address space that holds peripherals
|
|
#define SOC_PERIPHERAL_LOW 0x60000000
|
|
#define SOC_PERIPHERAL_HIGH 0x60100000
|
|
|
|
// Debug region, not used by software
|
|
#define SOC_DEBUG_LOW 0x20000000
|
|
#define SOC_DEBUG_HIGH 0x28000000
|
|
|
|
// Start (highest address) of ROM boot stack, only relevant during early boot
|
|
#define SOC_ROM_STACK_START 0x3fcebf10
|
|
|
|
//interrupt cpu using table, Please see the core-isa.h
|
|
/*************************************************************************************************************
|
|
* Intr num Level Type PRO CPU usage
|
|
* 0 1 extern level Panic
|
|
* 1 1 extern level WMAC
|
|
* 2 1 extern level
|
|
* 3 1 extern level
|
|
* 4 1 extern level WBB
|
|
* 5 1 extern level BT/BLE Controller
|
|
* 6 1 timer FreeRTOS Tick(L1)
|
|
* 7 1 software
|
|
* 8 1 extern level BT/BLE BB(RX/TX)
|
|
* 9 1 extern level
|
|
* 10 1 extern edge
|
|
* 11 3 profiling
|
|
* 12 1 extern level
|
|
* 13 1 extern level
|
|
* 14 7 nmi Reserved
|
|
* 15 3 timer FreeRTOS Tick(L3)
|
|
* 16 5 timer
|
|
* 17 1 extern level
|
|
* 18 1 extern level
|
|
* 19 2 extern level
|
|
* 20 2 extern level
|
|
* 21 2 extern level
|
|
* 22 3 extern edge
|
|
* 23 3 extern level
|
|
* 24 4 extern level TG1_WDT
|
|
* 25 4 extern level CACHEERR
|
|
* 26 5 extern level
|
|
* 27 3 extern level Reserved
|
|
* 28 4 extern edge Reserved
|
|
* 29 3 software Reserved
|
|
* 30 4 extern edge Reserved
|
|
* 31 5 extern level
|
|
*************************************************************************************************************
|
|
*/
|
|
|
|
//CPU0 Interrupt number reserved, not touch this.
|
|
#define ETS_WMAC_INUM 1
|
|
//#define ETS_BT_HOST_INUM 1
|
|
#define ETS_WBB_INUM 4
|
|
#define ETS_SYSTICK_INUM 9
|
|
#define ETS_TG0_T1_INUM 10 /* use edge interrupt */
|
|
#define ETS_CPU_INTR0_INUM 12 /* used as freertos soft intr */
|
|
#define ETS_FRC1_INUM 22
|
|
#define ETS_T1_WDT_INUM 24
|
|
#define ETS_CACHEERR_INUM 25
|
|
#define ETS_MEMPROT_ERR_INUM 26
|
|
#define ETS_DPORT_INUM 28
|
|
|
|
//CPU0 Max valid interrupt number
|
|
#define ETS_MAX_INUM 31
|
|
|
|
//CPU0 Interrupt number used in ROM, should be cancelled in SDK
|
|
#define ETS_SLC_INUM 1
|
|
#define ETS_UART0_INUM 5
|
|
#define ETS_UART1_INUM 5
|
|
#define ETS_SPI2_INUM 1
|
|
//CPU0 Interrupt number used in ROM code only when module init function called, should pay attention here.
|
|
#define ETS_GPIO_INUM 4
|
|
|
|
//Other interrupt number should be managed by the user
|
|
|
|
//Invalid interrupt for number interrupt matrix
|
|
#define ETS_INVALID_INUM 0
|
|
|
|
//Interrupt medium level, used for INT WDT for example
|
|
#define SOC_INTERRUPT_LEVEL_MEDIUM 4
|