esp-idf/components/esp32/int_wdt.c
chenjianqiang 9f9da9ec96 feat(timer): refator timer group driver
1. add hal and low-level layer for timer group
2. add callback functions to handle interrupt
3. add timer deinit function
4. add timer spinlock take function
2019-11-21 14:14:19 +08:00

114 lines
3.9 KiB
C

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include <esp_types.h>
#include "esp_err.h"
#include "esp_intr_alloc.h"
#include "esp_attr.h"
#include "esp_freertos_hooks.h"
#include "soc/timer_periph.h"
#include "driver/timer.h"
#include "driver/periph_ctrl.h"
#include "esp_int_wdt.h"
#include "hal/timer_ll.h"
#if CONFIG_ESP_INT_WDT
#define TG1_WDT_TICK_US 500
#define WDT_INT_NUM 24
//Take care: the tick hook can also be called before esp_int_wdt_init() is called.
#if CONFIG_ESP_INT_WDT_CHECK_CPU1
//Not static; the ISR assembly checks this.
bool int_wdt_app_cpu_ticked=false;
static void IRAM_ATTR tick_hook(void) {
if (xPortGetCoreID()!=0) {
int_wdt_app_cpu_ticked=true;
} else {
//Only feed wdt if app cpu also ticked.
if (int_wdt_app_cpu_ticked) {
timer_ll_wdt_set_protect(&TIMERG1, false);
//Set timeout before interrupt
timer_ll_wdt_set_timeout(&TIMERG1, 0,
CONFIG_ESP_INT_WDT_TIMEOUT_MS*1000/TG1_WDT_TICK_US);
//Set timeout before reset
timer_ll_wdt_set_timeout(&TIMERG1, 1,
2*CONFIG_ESP_INT_WDT_TIMEOUT_MS*1000/TG1_WDT_TICK_US);
timer_ll_wdt_feed(&TIMERG1);
timer_ll_wdt_set_protect(&TIMERG1, true);
int_wdt_app_cpu_ticked=false;
}
}
}
#else
static void IRAM_ATTR tick_hook(void) {
if (xPortGetCoreID()!=0) return;
timer_ll_wdt_set_protect(&TIMERG1, false);
//Set timeout before interrupt
timer_ll_wdt_set_timeout(&TIMERG1, 0, CONFIG_ESP_INT_WDT_TIMEOUT_MS*1000/TG1_WDT_TICK_US);
//Set timeout before reset
timer_ll_wdt_set_timeout(&TIMERG1, 1, 2*CONFIG_ESP_INT_WDT_TIMEOUT_MS*1000/TG1_WDT_TICK_US);
timer_ll_wdt_feed(&TIMERG1);
timer_ll_wdt_set_protect(&TIMERG1, true);
}
#endif
void esp_int_wdt_init(void) {
periph_module_enable(PERIPH_TIMG1_MODULE);
//The timer configs initially are set to 5 seconds, to make sure the CPU can start up. The tick hook sets
//it to their actual value.
timer_ll_wdt_set_protect(&TIMERG1, false);
timer_ll_wdt_init(&TIMERG1);
timer_ll_wdt_set_tick(&TIMERG1, TG1_WDT_TICK_US); //Prescaler: wdt counts in ticks of TG1_WDT_TICK_US
//1st stage timeout: interrupt
timer_ll_wdt_set_timeout_behavior(&TIMERG1, 0, TIMER_WDT_INT);
timer_ll_wdt_set_timeout(&TIMERG1, 0, 5*1000*1000/TG1_WDT_TICK_US);
//2nd stage timeout: reset system
timer_ll_wdt_set_timeout_behavior(&TIMERG1, 1, TIMER_WDT_RESET_SYSTEM);
timer_ll_wdt_set_timeout(&TIMERG1, 1, 5*1000*1000/TG1_WDT_TICK_US);
timer_ll_wdt_set_enable(&TIMERG1, true);
timer_ll_wdt_feed(&TIMERG1);
timer_ll_wdt_set_protect(&TIMERG1, true);
timer_ll_wdt_clear_intr_status(&TIMERG1);
timer_ll_wdt_enable_intr(&TIMERG1);
}
void esp_int_wdt_cpu_init(void)
{
esp_register_freertos_tick_hook_for_cpu(tick_hook, xPortGetCoreID());
ESP_INTR_DISABLE(WDT_INT_NUM);
intr_matrix_set(xPortGetCoreID(), ETS_TG1_WDT_LEVEL_INTR_SOURCE, WDT_INT_NUM);
//We do not register a handler for the interrupt because it is interrupt level 4 which
//is not servicable from C. Instead, xtensa_vectors.S has a call to the panic handler for
//this interrupt.
ESP_INTR_ENABLE(WDT_INT_NUM);
}
#endif