esp-idf/examples/common_components/protocol_examples_common/Kconfig.projbuild
2019-05-21 09:32:55 +02:00

154 lines
4.5 KiB
Plaintext

menu "Example Connection Configuration"
choice EXAMPLE_CONNECT_INTERFACE
prompt "Connect using"
default EXAMPLE_CONNECT_WIFI
help
Protocol examples can use Wi-Fi or Ethernet to connect to the network.
Choose which interface to use.
config EXAMPLE_CONNECT_WIFI
bool "Wi-Fi"
config EXAMPLE_CONNECT_ETHERNET
bool "Ethernet"
endchoice
config EXAMPLE_WIFI_SSID
depends on EXAMPLE_CONNECT_WIFI
string "WiFi SSID"
default "myssid"
help
SSID (network name) for the example to connect to.
config EXAMPLE_WIFI_PASSWORD
depends on EXAMPLE_CONNECT_WIFI
string "WiFi Password"
default "mypassword"
help
WiFi password (WPA or WPA2) for the example to use.
Can be left blank if the network has no security set.
choice EXAMPLE_PHY_MODEL
prompt "Ethernet PHY"
depends on EXAMPLE_CONNECT_ETHERNET
default EXAMPLE_PHY_TLK110
help
Select the PHY driver to use for the example.
config EXAMPLE_PHY_IP101
bool "IP101"
help
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
config EXAMPLE_PHY_TLK110
bool "TI TLK110 PHY"
help
Select this to use the TI TLK110 PHY
config EXAMPLE_PHY_LAN8720
bool "Microchip LAN8720 PHY"
help
Select this to use the Microchip LAN8720 PHY
endchoice
config EXAMPLE_PHY_ADDRESS
int "PHY Address (0-31)"
depends on EXAMPLE_CONNECT_ETHERNET
default 31
range 0 31
help
Select the PHY Address (0-31) for the hardware configuration and PHY model.
TLK110 default 31
LAN8720 default 1 or 0
choice EXAMPLE_PHY_CLOCK_MODE
prompt "EMAC clock mode"
depends on EXAMPLE_CONNECT_ETHERNET
default EXAMPLE_PHY_CLOCK_GPIO0_IN
help
Select external (input on GPIO0) or internal (output on GPIO16 or GPIO17) clock
config EXAMPLE_PHY_CLOCK_GPIO0_IN
bool "GPIO0 input"
depends on EXAMPLE_CONNECT_ETHERNET
help
Input of 50MHz PHY clock on GPIO0.
config EXAMPLE_PHY_CLOCK_GPIO0_OUT
bool "GPIO0 Output"
help
Output the internal 50MHz RMII clock on GPIO0.
config EXAMPLE_PHY_CLOCK_GPIO16_OUT
bool "GPIO16 output"
depends on EXAMPLE_CONNECT_ETHERNET
help
Output the internal 50MHz APLL clock on GPIO16.
config EXAMPLE_PHY_CLOCK_GPIO17_OUT
bool "GPIO17 output (inverted)"
depends on EXAMPLE_CONNECT_ETHERNET
help
Output the internal 50MHz APLL clock on GPIO17 (inverted signal).
endchoice
config EXAMPLE_PHY_CLOCK_MODE
int
depends on EXAMPLE_CONNECT_ETHERNET
default 0 if EXAMPLE_PHY_CLOCK_GPIO0_IN
default 1 if EXAMPLE_PHY_CLOCK_GPIO0_OUT
default 2 if EXAMPLE_PHY_CLOCK_GPIO16_OUT
default 3 if EXAMPLE_PHY_CLOCK_GPIO17_OUT
config EXAMPLE_PHY_USE_POWER_PIN
bool "Use PHY Power (enable/disable) pin"
depends on EXAMPLE_CONNECT_ETHERNET
default y
help
Use a GPIO "power pin" to power the PHY on/off during operation.
Consult the example README for more details
config EXAMPLE_PHY_POWER_PIN
int "PHY Power GPIO"
depends on EXAMPLE_CONNECT_ETHERNET
default 17
range 0 33
depends on EXAMPLE_PHY_USE_POWER_PIN
help
GPIO number to use for powering on/off the PHY.
config EXAMPLE_PHY_SMI_MDC_PIN
int "SMI MDC Pin"
depends on EXAMPLE_CONNECT_ETHERNET
default 23
range 0 33
help
GPIO number to use for SMI clock output MDC to PHY.
config EXAMPLE_PHY_SMI_MDIO_PIN
int "SMI MDIO Pin"
depends on EXAMPLE_CONNECT_ETHERNET
default 18
range 0 33
help
GPIO number to use for SMI data pin MDIO to/from PHY.
config EXAMPLE_CONNECT_IPV6
bool "Obtain IPv6 link-local address"
default y
help
By default, examples will wait until IPv4 and IPv6 addresses are obtained.
Disable this option if the network does not support IPv6.
endmenu