esp-idf/examples/system/console/advanced/components/cmd_system/cmd_system.c

/* Console example — various system commands

   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/

#include <stdio.h>
#include <string.h>
#include <ctype.h>
#include <inttypes.h>
#include <unistd.h>
#include "esp_log.h"
#include "esp_console.h"
#include "esp_chip_info.h"
#include "esp_sleep.h"
#include "esp_flash.h"
#include "driver/rtc_io.h"
#include "driver/uart.h"
#include "argtable3/argtable3.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "cmd_system.h"
#include "sdkconfig.h"

#ifdef CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS
#define WITH_TASKS_INFO 1
#endif

static const char *TAG = "cmd_system";

static void register_free(void);
static void register_heap(void);
static void register_version(void);
static void register_restart(void);
static void register_deep_sleep(void);
static void register_light_sleep(void);
#if WITH_TASKS_INFO
static void register_tasks(void);
#endif
static void register_log_level(void);

void register_system_common(void)
{
    register_free();
    register_heap();
    register_version();
    register_restart();
#if WITH_TASKS_INFO
    register_tasks();
#endif
    register_log_level();
}

void register_system_sleep(void)
{
    register_deep_sleep();
    register_light_sleep();
}

void register_system(void)
{
    register_system_common();
    register_system_sleep();
}

/* 'version' command */
static int get_version(int argc, char **argv)
{
    const char *model;
    esp_chip_info_t info;
    uint32_t flash_size;
    esp_chip_info(&info);

    switch(info.model) {
        case CHIP_ESP32:
            model = "ESP32";
            break;
        case CHIP_ESP32S2:
            model = "ESP32-S2";
            break;
        case CHIP_ESP32S3:
            model = "ESP32-S3";
            break;
        case CHIP_ESP32C3:
            model = "ESP32-C3";
            break;
        case CHIP_ESP32H2:
            model = "ESP32-H2";
            break;
        case CHIP_ESP32C2:
            model = "ESP32-C2";
            break;
        default:
            model = "Unknown";
            break;
    }

    if(esp_flash_get_size(NULL, &flash_size) != ESP_OK) {
        printf("Get flash size failed");
        return 1;
    }
    printf("IDF Version:%s\r\n", esp_get_idf_version());
    printf("Chip info:\r\n");
    printf("\tmodel:%s\r\n", model);
    printf("\tcores:%d\r\n", info.cores);
    printf("\tfeature:%s%s%s%s%"PRIu32"%s\r\n",
           info.features & CHIP_FEATURE_WIFI_BGN ? "/802.11bgn" : "",
           info.features & CHIP_FEATURE_BLE ? "/BLE" : "",
           info.features & CHIP_FEATURE_BT ? "/BT" : "",
           info.features & CHIP_FEATURE_EMB_FLASH ? "/Embedded-Flash:" : "/External-Flash:",
           flash_size / (1024 * 1024), " MB");
    printf("\trevision number:%d\r\n", info.revision);
    return 0;
}

static void register_version(void)
{
    const esp_console_cmd_t cmd = {
        .command = "version",
        .help = "Get version of chip and SDK",
        .hint = NULL,
        .func = &get_version,
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

/** 'restart' command restarts the program */

static int restart(int argc, char **argv)
{
    ESP_LOGI(TAG, "Restarting");
    esp_restart();
}

static void register_restart(void)
{
    const esp_console_cmd_t cmd = {
        .command = "restart",
        .help = "Software reset of the chip",
        .hint = NULL,
        .func = &restart,
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

/** 'free' command prints available heap memory */

static int free_mem(int argc, char **argv)
{
    printf("%"PRIu32"\n", esp_get_free_heap_size());
    return 0;
}

static void register_free(void)
{
    const esp_console_cmd_t cmd = {
        .command = "free",
        .help = "Get the current size of free heap memory",
        .hint = NULL,
        .func = &free_mem,
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

/* 'heap' command prints minumum heap size */
static int heap_size(int argc, char **argv)
{
    uint32_t heap_size = heap_caps_get_minimum_free_size(MALLOC_CAP_DEFAULT);
    printf("min heap size: %"PRIu32"\n", heap_size);
    return 0;
}

static void register_heap(void)
{
    const esp_console_cmd_t heap_cmd = {
        .command = "heap",
        .help = "Get minimum size of free heap memory that was available during program execution",
        .hint = NULL,
        .func = &heap_size,
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&heap_cmd) );

}

/** 'tasks' command prints the list of tasks and related information */
#if WITH_TASKS_INFO

static int tasks_info(int argc, char **argv)
{
    const size_t bytes_per_task = 40; /* see vTaskList description */
    char *task_list_buffer = malloc(uxTaskGetNumberOfTasks() * bytes_per_task);
    if (task_list_buffer == NULL) {
        ESP_LOGE(TAG, "failed to allocate buffer for vTaskList output");
        return 1;
    }
    fputs("Task Name\tStatus\tPrio\tHWM\tTask#", stdout);
#ifdef CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID
    fputs("\tAffinity", stdout);
#endif
    fputs("\n", stdout);
    vTaskList(task_list_buffer);
    fputs(task_list_buffer, stdout);
    free(task_list_buffer);
    return 0;
}

static void register_tasks(void)
{
    const esp_console_cmd_t cmd = {
        .command = "tasks",
        .help = "Get information about running tasks",
        .hint = NULL,
        .func = &tasks_info,
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

#endif // WITH_TASKS_INFO

/** 'deep_sleep' command puts the chip into deep sleep mode */

static struct {
    struct arg_int *wakeup_time;
#if SOC_PM_SUPPORT_EXT_WAKEUP
    struct arg_int *wakeup_gpio_num;
    struct arg_int *wakeup_gpio_level;
#endif
    struct arg_end *end;
} deep_sleep_args;


static int deep_sleep(int argc, char **argv)
{
    int nerrors = arg_parse(argc, argv, (void **) &deep_sleep_args);
    if (nerrors != 0) {
        arg_print_errors(stderr, deep_sleep_args.end, argv[0]);
        return 1;
    }
    if (deep_sleep_args.wakeup_time->count) {
        uint64_t timeout = 1000ULL * deep_sleep_args.wakeup_time->ival[0];
        ESP_LOGI(TAG, "Enabling timer wakeup, timeout=%lluus", timeout);
        ESP_ERROR_CHECK( esp_sleep_enable_timer_wakeup(timeout) );
    }

#if SOC_PM_SUPPORT_EXT_WAKEUP
    if (deep_sleep_args.wakeup_gpio_num->count) {
        int io_num = deep_sleep_args.wakeup_gpio_num->ival[0];
        if (!esp_sleep_is_valid_wakeup_gpio(io_num)) {
            ESP_LOGE(TAG, "GPIO %d is not an RTC IO", io_num);
            return 1;
        }
        int level = 0;
        if (deep_sleep_args.wakeup_gpio_level->count) {
            level = deep_sleep_args.wakeup_gpio_level->ival[0];
            if (level != 0 && level != 1) {
                ESP_LOGE(TAG, "Invalid wakeup level: %d", level);
                return 1;
            }
        }
        ESP_LOGI(TAG, "Enabling wakeup on GPIO%d, wakeup on %s level",
                 io_num, level ? "HIGH" : "LOW");

        ESP_ERROR_CHECK( esp_sleep_enable_ext1_wakeup(1ULL << io_num, level) );
        ESP_LOGE(TAG, "GPIO wakeup from deep sleep currently unsupported on ESP32-C3");
    }
#endif // SOC_PM_SUPPORT_EXT_WAKEUP

#if CONFIG_IDF_TARGET_ESP32
    rtc_gpio_isolate(GPIO_NUM_12);
#endif //CONFIG_IDF_TARGET_ESP32

    esp_deep_sleep_start();
}

static void register_deep_sleep(void)
{
    int num_args = 1;
    deep_sleep_args.wakeup_time =
        arg_int0("t", "time", "<t>", "Wake up time, ms");
#if SOC_PM_SUPPORT_EXT_WAKEUP
    deep_sleep_args.wakeup_gpio_num =
        arg_int0(NULL, "io", "<n>",
                 "If specified, wakeup using GPIO with given number");
    deep_sleep_args.wakeup_gpio_level =
        arg_int0(NULL, "io_level", "<0|1>", "GPIO level to trigger wakeup");
    num_args += 2;
#endif
    deep_sleep_args.end = arg_end(num_args);

    const esp_console_cmd_t cmd = {
        .command = "deep_sleep",
        .help = "Enter deep sleep mode. "
#if SOC_PM_SUPPORT_EXT_WAKEUP
        "Two wakeup modes are supported: timer and GPIO. "
#else
        "Timer wakeup mode is supported. "
#endif
        "If no wakeup option is specified, will sleep indefinitely.",
        .hint = NULL,
        .func = &deep_sleep,
        .argtable = &deep_sleep_args
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

/** 'light_sleep' command puts the chip into light sleep mode */

static struct {
    struct arg_int *wakeup_time;
    struct arg_int *wakeup_gpio_num;
    struct arg_int *wakeup_gpio_level;
    struct arg_end *end;
} light_sleep_args;

static int light_sleep(int argc, char **argv)
{
    int nerrors = arg_parse(argc, argv, (void **) &light_sleep_args);
    if (nerrors != 0) {
        arg_print_errors(stderr, light_sleep_args.end, argv[0]);
        return 1;
    }
    esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
    if (light_sleep_args.wakeup_time->count) {
        uint64_t timeout = 1000ULL * light_sleep_args.wakeup_time->ival[0];
        ESP_LOGI(TAG, "Enabling timer wakeup, timeout=%lluus", timeout);
        ESP_ERROR_CHECK( esp_sleep_enable_timer_wakeup(timeout) );
    }
    int io_count = light_sleep_args.wakeup_gpio_num->count;
    if (io_count != light_sleep_args.wakeup_gpio_level->count) {
        ESP_LOGE(TAG, "Should have same number of 'io' and 'io_level' arguments");
        return 1;
    }
    for (int i = 0; i < io_count; ++i) {
        int io_num = light_sleep_args.wakeup_gpio_num->ival[i];
        int level = light_sleep_args.wakeup_gpio_level->ival[i];
        if (level != 0 && level != 1) {
            ESP_LOGE(TAG, "Invalid wakeup level: %d", level);
            return 1;
        }
        ESP_LOGI(TAG, "Enabling wakeup on GPIO%d, wakeup on %s level",
                 io_num, level ? "HIGH" : "LOW");

        ESP_ERROR_CHECK( gpio_wakeup_enable(io_num, level ? GPIO_INTR_HIGH_LEVEL : GPIO_INTR_LOW_LEVEL) );
    }
    if (io_count > 0) {
        ESP_ERROR_CHECK( esp_sleep_enable_gpio_wakeup() );
    }
    if (CONFIG_ESP_CONSOLE_UART_NUM >= 0 && CONFIG_ESP_CONSOLE_UART_NUM <= UART_NUM_1) {
        ESP_LOGI(TAG, "Enabling UART wakeup (press ENTER to exit light sleep)");
        ESP_ERROR_CHECK( uart_set_wakeup_threshold(CONFIG_ESP_CONSOLE_UART_NUM, 3) );
        ESP_ERROR_CHECK( esp_sleep_enable_uart_wakeup(CONFIG_ESP_CONSOLE_UART_NUM) );
    }
    fflush(stdout);
    fsync(fileno(stdout));
    esp_light_sleep_start();
    esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
    const char *cause_str;
    switch (cause) {
    case ESP_SLEEP_WAKEUP_GPIO:
        cause_str = "GPIO";
        break;
    case ESP_SLEEP_WAKEUP_UART:
        cause_str = "UART";
        break;
    case ESP_SLEEP_WAKEUP_TIMER:
        cause_str = "timer";
        break;
    default:
        cause_str = "unknown";
        printf("%d\n", cause);
    }
    ESP_LOGI(TAG, "Woke up from: %s", cause_str);
    return 0;
}

static void register_light_sleep(void)
{
    light_sleep_args.wakeup_time =
        arg_int0("t", "time", "<t>", "Wake up time, ms");
    light_sleep_args.wakeup_gpio_num =
        arg_intn(NULL, "io", "<n>", 0, 8,
                 "If specified, wakeup using GPIO with given number");
    light_sleep_args.wakeup_gpio_level =
        arg_intn(NULL, "io_level", "<0|1>", 0, 8, "GPIO level to trigger wakeup");
    light_sleep_args.end = arg_end(3);

    const esp_console_cmd_t cmd = {
        .command = "light_sleep",
        .help = "Enter light sleep mode. "
        "Two wakeup modes are supported: timer and GPIO. "
        "Multiple GPIO pins can be specified using pairs of "
        "'io' and 'io_level' arguments. "
        "Will also wake up on UART input.",
        .hint = NULL,
        .func = &light_sleep,
        .argtable = &light_sleep_args
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}

/** log_level command changes log level via esp_log_level_set */

static struct {
    struct arg_str *tag;
    struct arg_str *level;
    struct arg_end *end;
} log_level_args;

static const char* s_log_level_names[] = {
    "none",
    "error",
    "warn",
    "info",
    "debug",
    "verbose"
};

static int log_level(int argc, char **argv)
{
    int nerrors = arg_parse(argc, argv, (void **) &log_level_args);
    if (nerrors != 0) {
        arg_print_errors(stderr, log_level_args.end, argv[0]);
        return 1;
    }
    assert(log_level_args.tag->count == 1);
    assert(log_level_args.level->count == 1);
    const char* tag = log_level_args.tag->sval[0];
    const char* level_str = log_level_args.level->sval[0];
    esp_log_level_t level;
    size_t level_len = strlen(level_str);
    for (level = ESP_LOG_NONE; level <= ESP_LOG_VERBOSE; level++) {
        if (memcmp(level_str, s_log_level_names[level], level_len) == 0) {
            break;
        }
    }
    if (level > ESP_LOG_VERBOSE) {
        printf("Invalid log level '%s', choose from none|error|warn|info|debug|verbose\n", level_str);
        return 1;
    }
    if (level > CONFIG_LOG_MAXIMUM_LEVEL) {
        printf("Can't set log level to %s, max level limited in menuconfig to %s. "
               "Please increase CONFIG_LOG_MAXIMUM_LEVEL in menuconfig.\n",
               s_log_level_names[level], s_log_level_names[CONFIG_LOG_MAXIMUM_LEVEL]);
        return 1;
    }
    esp_log_level_set(tag, level);
    return 0;
}

static void register_log_level(void)
{
    log_level_args.tag = arg_str1(NULL, NULL, "<tag|*>", "Log tag to set the level for, or * to set for all tags");
    log_level_args.level = arg_str1(NULL, NULL, "<none|error|warn|debug|verbose>", "Log level to set. Abbreviated words are accepted.");
    log_level_args.end = arg_end(2);

    const esp_console_cmd_t cmd = {
        .command = "log_level",
        .help = "Set log level for all tags or a specific tag.",
        .hint = NULL,
        .func = &log_level,
        .argtable = &log_level_args
    };
    ESP_ERROR_CHECK( esp_console_cmd_register(&cmd) );
}