esp-idf/components/bt/bluedroid/stack/include/smp_api.h
Yulong 63e5cbbd66 component/bt: Added the bluedroid environment variable dynomic malloc support & support to malloc the memory to the psram.
component/bt: Added the Macro for the classic BT support.
component/bt: added the bluedroid deinit method.
component/bt: allow more classic BT global variables to use dynamic allocation scheme
1. allocate memory for AVDT, AVCT control blocks when dynamic memory is used
2. allow SBC decoder buffer to use dynamic allocation scheme
component/bt: Remove the wrong changes in bt/Kconfig & Added the GATTS_INCLUDED in the gatt_free function when gatt service close.
component/bt: Shorten the abbreviation BT_ALLOCATION_FROM_SPIRAM_FIRST and BT_BLE_DYNAMIC_ENV_MEMORY two macros.
2018-01-24 15:18:02 +08:00

497 lines
19 KiB
C

/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the SMP API function external definitions.
*
******************************************************************************/
#ifndef SMP_API_H
#define SMP_API_H
#include "bt_target.h"
#define SMP_PIN_CODE_LEN_MAX PIN_CODE_LEN
#define SMP_PIN_CODE_LEN_MIN 6
#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
/* SMP command code */
#define SMP_OPCODE_PAIRING_REQ 0x01
#define SMP_OPCODE_PAIRING_RSP 0x02
#define SMP_OPCODE_CONFIRM 0x03
#define SMP_OPCODE_RAND 0x04
#define SMP_OPCODE_PAIRING_FAILED 0x05
#define SMP_OPCODE_ENCRYPT_INFO 0x06
#define SMP_OPCODE_MASTER_ID 0x07
#define SMP_OPCODE_IDENTITY_INFO 0x08
#define SMP_OPCODE_ID_ADDR 0x09
#define SMP_OPCODE_SIGN_INFO 0x0A
#define SMP_OPCODE_SEC_REQ 0x0B
#define SMP_OPCODE_PAIR_PUBLIC_KEY 0x0C
#define SMP_OPCODE_PAIR_DHKEY_CHECK 0x0D
#define SMP_OPCODE_PAIR_KEYPR_NOTIF 0x0E
#define SMP_OPCODE_MAX SMP_OPCODE_PAIR_KEYPR_NOTIF
#define SMP_OPCODE_MIN SMP_OPCODE_PAIRING_REQ
#define SMP_OPCODE_PAIR_COMMITM 0x0F
#endif
/* SMP event type */
#define SMP_IO_CAP_REQ_EVT 1 /* IO capability request event */
#define SMP_SEC_REQUEST_EVT 2 /* SMP pairing request */
#define SMP_PASSKEY_NOTIF_EVT 3 /* passkey notification event */
#define SMP_PASSKEY_REQ_EVT 4 /* passkey request event */
#define SMP_OOB_REQ_EVT 5 /* OOB request event */
#define SMP_NC_REQ_EVT 6 /* Numeric Comparison request event */
#define SMP_COMPLT_EVT 7 /* SMP complete event */
#define SMP_PEER_KEYPR_NOT_EVT 8 /* Peer keypress notification received event */
#define SMP_SC_OOB_REQ_EVT 9 /* SC OOB request event (both local and peer OOB data */
/* can be expected in response) */
#define SMP_SC_LOC_OOB_DATA_UP_EVT 10 /* SC OOB local data set is created */
/* (as result of SMP_CrLocScOobData(...)) */
#define SMP_BR_KEYS_REQ_EVT 12 /* SMP over BR keys request event */
typedef UINT8 tSMP_EVT;
/* pairing failure reason code */
#define SMP_PASSKEY_ENTRY_FAIL 0x01
#define SMP_OOB_FAIL 0x02
#define SMP_PAIR_AUTH_FAIL 0x03
#define SMP_CONFIRM_VALUE_ERR 0x04
#define SMP_PAIR_NOT_SUPPORT 0x05
#define SMP_ENC_KEY_SIZE 0x06
#define SMP_INVALID_CMD 0x07
#define SMP_PAIR_FAIL_UNKNOWN 0x08
#define SMP_REPEATED_ATTEMPTS 0x09
#define SMP_INVALID_PARAMETERS 0x0A
#define SMP_DHKEY_CHK_FAIL 0x0B
#define SMP_NUMERIC_COMPAR_FAIL 0x0C
#define SMP_BR_PARING_IN_PROGR 0x0D
#define SMP_XTRANS_DERIVE_NOT_ALLOW 0x0E
#define SMP_MAX_FAIL_RSN_PER_SPEC SMP_XTRANS_DERIVE_NOT_ALLOW
/* self defined error code */
#define SMP_PAIR_INTERNAL_ERR (SMP_MAX_FAIL_RSN_PER_SPEC + 0x01) /* 0x0E */
/* 0x0F unknown IO capability, unable to decide association model */
#define SMP_UNKNOWN_IO_CAP (SMP_MAX_FAIL_RSN_PER_SPEC + 0x02) /* 0x0F */
#define SMP_INIT_FAIL (SMP_MAX_FAIL_RSN_PER_SPEC + 0x03) /* 0x10 */
#define SMP_CONFIRM_FAIL (SMP_MAX_FAIL_RSN_PER_SPEC + 0x04) /* 0x11 */
#define SMP_BUSY (SMP_MAX_FAIL_RSN_PER_SPEC + 0x05) /* 0x12 */
#define SMP_ENC_FAIL (SMP_MAX_FAIL_RSN_PER_SPEC + 0x06) /* 0x13 */
#define SMP_STARTED (SMP_MAX_FAIL_RSN_PER_SPEC + 0x07) /* 0x14 */
#define SMP_RSP_TIMEOUT (SMP_MAX_FAIL_RSN_PER_SPEC + 0x08) /* 0x15 */
#define SMP_DIV_NOT_AVAIL (SMP_MAX_FAIL_RSN_PER_SPEC + 0x09) /* 0x16 */
/* 0x17 unspecified failed reason */
#define SMP_FAIL (SMP_MAX_FAIL_RSN_PER_SPEC + 0x0A) /* 0x17 */
#define SMP_CONN_TOUT (SMP_MAX_FAIL_RSN_PER_SPEC + 0x0B)
#define SMP_SUCCESS 0
typedef UINT8 tSMP_STATUS;
/* Device IO capability */
#define SMP_IO_CAP_OUT BTM_IO_CAP_OUT /* DisplayOnly */
#define SMP_IO_CAP_IO BTM_IO_CAP_IO /* DisplayYesNo */
#define SMP_IO_CAP_IN BTM_IO_CAP_IN /* KeyboardOnly */
#define SMP_IO_CAP_NONE BTM_IO_CAP_NONE /* NoInputNoOutput */
#define SMP_IO_CAP_KBDISP BTM_IO_CAP_KBDISP /* Keyboard Display */
#define SMP_IO_CAP_MAX BTM_IO_CAP_MAX
typedef UINT8 tSMP_IO_CAP;
#ifndef SMP_DEFAULT_IO_CAPS
#define SMP_DEFAULT_IO_CAPS SMP_IO_CAP_KBDISP
#endif
/* OOB data present or not */
enum {
SMP_OOB_NONE,
SMP_OOB_PRESENT,
SMP_OOB_UNKNOWN
};
typedef UINT8 tSMP_OOB_FLAG;
/* type of OOB data required from application */
enum {
SMP_OOB_INVALID_TYPE,
SMP_OOB_PEER,
SMP_OOB_LOCAL,
SMP_OOB_BOTH
};
typedef UINT8 tSMP_OOB_DATA_TYPE;
#define SMP_AUTH_NO_BOND 0x00
#define SMP_AUTH_GEN_BOND 0x01 //todo sdh change GEN_BOND to BOND
/* SMP Authentication requirement */
#define SMP_AUTH_YN_BIT (1 << 2)
#define SMP_SC_SUPPORT_BIT (1 << 3)
#define SMP_KP_SUPPORT_BIT (1 << 4)
#define SMP_AUTH_MASK (SMP_AUTH_GEN_BOND|SMP_AUTH_YN_BIT|SMP_SC_SUPPORT_BIT|SMP_KP_SUPPORT_BIT)
#define SMP_AUTH_BOND SMP_AUTH_GEN_BOND
/* no MITM, No Bonding, encryption only */
#define SMP_AUTH_NB_ENC_ONLY 0x00 //(SMP_AUTH_MASK | BTM_AUTH_SP_NO)
/* MITM, No Bonding, Use IO Capability to determine authentication procedure */
#define SMP_AUTH_NB_IOCAP (SMP_AUTH_NO_BOND | SMP_AUTH_YN_BIT)
/* No MITM, General Bonding, Encryption only */
#define SMP_AUTH_GB_ENC_ONLY (SMP_AUTH_GEN_BOND )
/* MITM, General Bonding, Use IO Capability to determine authentication procedure */
#define SMP_AUTH_GB_IOCAP (SMP_AUTH_GEN_BOND | SMP_AUTH_YN_BIT)
/* Secure Connections, no MITM, no Bonding */
#define SMP_AUTH_SC_ENC_ONLY (SMP_SC_SUPPORT_BIT)
/* Secure Connections, no MITM, Bonding */
#define SMP_AUTH_SC_GB (SMP_SC_SUPPORT_BIT | SMP_AUTH_GEN_BOND)
/* Secure Connections, MITM, no Bonding */
#define SMP_AUTH_SC_MITM_NB (SMP_SC_SUPPORT_BIT | SMP_AUTH_YN_BIT | SMP_AUTH_NO_BOND)
/* Secure Connections, MITM, Bonding */
#define SMP_AUTH_SC_MITM_GB (SMP_SC_SUPPORT_BIT | SMP_AUTH_YN_BIT | SMP_AUTH_GEN_BOND)
/* All AuthReq RFU bits are set to 1 - NOTE: reserved bit in Bonding_Flags is not set */
#define SMP_AUTH_ALL_RFU_SET 0xF8
typedef UINT8 tSMP_AUTH_REQ;
#define SMP_SEC_NONE 0
#define SMP_SEC_UNAUTHENTICATE (1 << 0)
#define SMP_SEC_AUTHENTICATED (1 << 2)
typedef UINT8 tSMP_SEC_LEVEL;
/* Maximum Encryption Key Size range */
#define SMP_ENCR_KEY_SIZE_MIN 7
#define SMP_ENCR_KEY_SIZE_MAX 16
/* SMP key types */
#define SMP_SEC_KEY_TYPE_ENC (1 << 0) /* encryption key */
#define SMP_SEC_KEY_TYPE_ID (1 << 1) /* identity key */
#define SMP_SEC_KEY_TYPE_CSRK (1 << 2) /* slave CSRK */
#define SMP_SEC_KEY_TYPE_LK (1 << 3) /* BR/EDR link key */
typedef UINT8 tSMP_KEYS;
#define SMP_BR_SEC_DEFAULT_KEY (SMP_SEC_KEY_TYPE_ENC | SMP_SEC_KEY_TYPE_ID | \
SMP_SEC_KEY_TYPE_CSRK)
/* default security key distribution value */
#define SMP_SEC_DEFAULT_KEY (SMP_SEC_KEY_TYPE_ENC | SMP_SEC_KEY_TYPE_ID | \
SMP_SEC_KEY_TYPE_CSRK | SMP_SEC_KEY_TYPE_LK)
#define SMP_SC_KEY_STARTED 0 /* passkey entry started */
#define SMP_SC_KEY_ENTERED 1 /* passkey digit entered */
#define SMP_SC_KEY_ERASED 2 /* passkey digit erased */
#define SMP_SC_KEY_CLEARED 3 /* passkey cleared */
#define SMP_SC_KEY_COMPLT 4 /* passkey entry completed */
#define SMP_SC_KEY_OUT_OF_RANGE 5 /* out of range */
typedef UINT8 tSMP_SC_KEY_TYPE;
/* data type for BTM_SP_IO_REQ_EVT */
typedef struct {
tSMP_IO_CAP io_cap; /* local IO capabilities */
tSMP_OOB_FLAG oob_data; /* OOB data present (locally) for the peer device */
tSMP_AUTH_REQ auth_req; /* Authentication required (for local device) */
UINT8 max_key_size; /* max encryption key size */
tSMP_KEYS init_keys; /* initiator keys to be distributed */
tSMP_KEYS resp_keys; /* responder keys */
} tSMP_IO_REQ;
typedef struct {
tSMP_STATUS reason;
tSMP_SEC_LEVEL sec_level;
BOOLEAN is_pair_cancel;
BOOLEAN smp_over_br;
} tSMP_CMPL;
typedef struct {
BT_OCTET32 x;
BT_OCTET32 y;
} tSMP_PUBLIC_KEY;
/* the data associated with the info sent to the peer via OOB interface */
typedef struct {
BOOLEAN present;
BT_OCTET16 randomizer;
BT_OCTET16 commitment;
tBLE_BD_ADDR addr_sent_to;
BT_OCTET32 private_key_used; /* is used to calculate: */
/* publ_key_used = P-256(private_key_used, curve_p256.G) - send it to the */
/* other side */
/* dhkey = P-256(private_key_used, publ key rcvd from the other side) */
tSMP_PUBLIC_KEY publ_key_used; /* P-256(private_key_used, curve_p256.G) */
} tSMP_LOC_OOB_DATA;
/* the data associated with the info received from the peer via OOB interface */
typedef struct {
BOOLEAN present;
BT_OCTET16 randomizer;
BT_OCTET16 commitment;
tBLE_BD_ADDR addr_rcvd_from;
} tSMP_PEER_OOB_DATA;
typedef struct {
tSMP_LOC_OOB_DATA loc_oob_data;
tSMP_PEER_OOB_DATA peer_oob_data;
} tSMP_SC_OOB_DATA;
typedef union {
UINT32 passkey;
tSMP_IO_REQ io_req; /* IO request */
tSMP_CMPL cmplt;
tSMP_OOB_DATA_TYPE req_oob_type;
tSMP_LOC_OOB_DATA loc_oob_data;
} tSMP_EVT_DATA;
/* AES Encryption output */
typedef struct {
UINT8 status;
UINT8 param_len;
UINT16 opcode;
UINT8 param_buf[BT_OCTET16_LEN];
} tSMP_ENC;
/* Security Manager events - Called by the stack when Security Manager related events occur.*/
typedef UINT8 (tSMP_CALLBACK) (tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data);
/* callback function for CMAC algorithm
*/
typedef void (tCMAC_CMPL_CBACK)(UINT8 *p_mac, UINT16 tlen, UINT32 sign_counter);
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/* API of SMP */
/*******************************************************************************
**
** Function SMP_Init
**
** Description This function initializes the SMP unit.
**
** Returns void
**
*******************************************************************************/
extern void SMP_Init(void);
/*******************************************************************************
**
** Function SMP_Free
**
** Description This function de initializes the SMP unit.
**
** Returns void
**
*******************************************************************************/
extern void SMP_Free(void);
/*******************************************************************************
**
** Function SMP_SetTraceLevel
**
** Description This function sets the trace level for SMP. If called with
** a value of 0xFF, it simply returns the current trace level.
**
** Returns The new or current trace level
**
*******************************************************************************/
extern UINT8 SMP_SetTraceLevel (UINT8 new_level);
/*******************************************************************************
**
** Function SMP_Register
**
** Description This function register for the SMP service callback.
**
** Returns void
**
*******************************************************************************/
extern BOOLEAN SMP_Register (tSMP_CALLBACK *p_cback);
/*******************************************************************************
**
** Function SMP_Pair
**
** Description This function is called to start a SMP pairing.
**
** Returns SMP_STARTED if bond started, else otherwise exception.
**
*******************************************************************************/
extern tSMP_STATUS SMP_Pair (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function SMP_BR_PairWith
**
** Description This function is called to start a SMP pairing over BR/EDR.
**
** Returns SMP_STARTED if pairing started, otherwise reason for failure.
**
*******************************************************************************/
extern tSMP_STATUS SMP_BR_PairWith (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function SMP_PairCancel
**
** Description This function is called to cancel a SMP pairing.
**
** Returns TRUE - pairing cancelled
**
*******************************************************************************/
extern BOOLEAN SMP_PairCancel (BD_ADDR bd_addr);
/*******************************************************************************
**
** Function SMP_SecurityGrant
**
** Description This function is called to grant security process.
**
** Parameters bd_addr - peer device bd address.
** res - result of the operation SMP_SUCCESS if success.
** Otherwise, SMP_REPEATED_ATTEMPTS is too many attempts.
**
** Returns None
**
*******************************************************************************/
extern void SMP_SecurityGrant(BD_ADDR bd_addr, UINT8 res);
/*******************************************************************************
**
** Function SMP_PasskeyReply
**
** Description This function is called after Security Manager submitted
** Passkey request to the application.
**
** Parameters: bd_addr - Address of the device for which PIN was requested
** res - result of the operation SMP_SUCCESS if success
** passkey - numeric value in the range of
** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
**
*******************************************************************************/
extern void SMP_PasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey);
/*******************************************************************************
**
** Function SMP_ConfirmReply
**
** Description This function is called after Security Manager submitted
** numeric comparison request to the application.
**
** Parameters: bd_addr - Address of the device with which numeric
** comparison was requested
** res - comparison result SMP_SUCCESS if success
**
*******************************************************************************/
extern void SMP_ConfirmReply (BD_ADDR bd_addr, UINT8 res);
/*******************************************************************************
**
** Function SMP_OobDataReply
**
** Description This function is called to provide the OOB data for
** SMP in response to SMP_OOB_REQ_EVT
**
** Parameters: bd_addr - Address of the peer device
** res - result of the operation SMP_SUCCESS if success
** p_data - SM Randomizer C.
**
*******************************************************************************/
extern void SMP_OobDataReply(BD_ADDR bd_addr, tSMP_STATUS res, UINT8 len,
UINT8 *p_data);
/*******************************************************************************
**
** Function SMP_SecureConnectionOobDataReply
**
** Description This function is called to provide the SC OOB data for
** SMP in response to SMP_SC_OOB_REQ_EVT
**
** Parameters: p_data - pointer to the data
**
*******************************************************************************/
extern void SMP_SecureConnectionOobDataReply(UINT8 *p_data);
/*******************************************************************************
**
** Function SMP_Encrypt
**
** Description This function is called to encrypt the data with the specified
** key
**
** Parameters: key - Pointer to key key[0] conatins the MSB
** key_len - key length
** plain_text - Pointer to data to be encrypted
** plain_text[0] conatins the MSB
** pt_len - plain text length
** p_out - pointer to the encrypted outputs
**
** Returns Boolean - TRUE: encryption is successful
*******************************************************************************/
extern BOOLEAN SMP_Encrypt (UINT8 *key, UINT8 key_len,
UINT8 *plain_text, UINT8 pt_len,
tSMP_ENC *p_out);
/*******************************************************************************
**
** Function SMP_KeypressNotification
**
** Description This function is called to notify SM about Keypress Notification.
**
** Parameters: bd_addr - Address of the device to send keypress
** notification to
** value - keypress notification parameter value
**
*******************************************************************************/
extern void SMP_KeypressNotification (BD_ADDR bd_addr, UINT8 value);
/*******************************************************************************
**
** Function SMP_CreateLocalSecureConnectionsOobData
**
** Description This function is called to start creation of local SC OOB
** data set (tSMP_LOC_OOB_DATA).
**
** Parameters: bd_addr - Address of the device to send OOB data block
** to.
**
** Returns Boolean - TRUE: creation of local SC OOB data set started.
*******************************************************************************/
extern BOOLEAN SMP_CreateLocalSecureConnectionsOobData (
tBLE_BD_ADDR *addr_to_send_to);
#ifdef __cplusplus
}
#endif
#endif /* SMP_API_H */