esp-idf/components/driver
michael 0f10d12b81 mcpwm: fix the fault handling and capture issues
1. The fault signal 3 for unit 2 is corrected to the right value

2. Now `mcpwm_fault_set_oneshot_mode` will clear the status before, no
need to reset the peripheral.

3. The capture feature relies on the prescaler, but it's only
initialized in the mcpwm_init funciton, which is used to initialize a
PWM channel. This means, the capture may not work correctly if no PWM
channel is enabled.

   Now the prescaler is also updated when `mcpwm_capture_enable` is
called.
2020-02-15 18:39:28 +08:00
..
include/driver VFS: Check in select() if the UART driver is installed or not 2020-01-21 10:11:08 +01:00
test mcpwm: enable some unit tests again 2020-02-15 18:39:27 +08:00
adc1_i2s_private.h driver(i2s): fix broken i2s adc mode 2018-02-07 17:17:20 +08:00
can.c can: Add support for lower bit rates 2019-12-16 07:45:38 +00:00
CMakeLists.txt cmake: some formatting fixes 2019-06-21 19:53:29 +08:00
component.mk spi_master: compile as C11 due to use of stdatomic.h 2019-04-10 13:48:57 +08:00
gpio.c bugfix(GPIO): Fixed the bug that GPIO enables interrupts on one core, 2019-07-29 11:09:07 +00:00
i2c.c Merge branch 'bugfix/ticks_to_wait_for_uart_and_i2c' into 'master' 2019-06-11 08:41:44 +08:00
i2s.c bugfix(driver): fix i2s and timergroup some issues 2019-12-31 11:02:35 +08:00
Kconfig Rename Kconfig options (components/driver) 2019-05-21 09:09:01 +02:00
ledc.c driver(ledc): fixed ledc clock selection bug for release/v4.0 2019-08-12 17:16:52 +08:00
mcpwm.c mcpwm: fix the fault handling and capture issues 2020-02-15 18:39:28 +08:00
pcnt.c pcnt/driver: Add module reset before enabling 2019-09-06 11:34:53 +08:00
periph_ctrl.c all: Using xxx_periph.h 2019-06-03 14:15:08 +08:00
rmt.c rmt/driver: Add module reset before enabling 2019-09-06 11:34:53 +08:00
rtc_module.c bugfix(driver): fix i2s and timergroup some issues 2019-12-31 11:02:35 +08:00
sdio_slave.c sdio_slave: fix the send_flush infinite loop issue 2019-06-27 13:24:22 +08:00
sdkconfig.rename Rename Kconfig options (components/driver) 2019-05-21 09:09:01 +02:00
sdmmc_host.c sdmmc_host/driver: Add module reset before enabling 2019-09-06 11:34:53 +08:00
sdmmc_private.h sdmmc: implement partial DDR support 2018-08-30 13:11:54 +08:00
sdmmc_transaction.c sdmmc: implement partial DDR support 2018-08-30 13:11:54 +08:00
sdspi_crc.c separate rom from esp32 component to esp_rom 2019-03-21 18:51:45 +08:00
sdspi_crc.h Replace all DOS line endings with Unix 2018-07-12 19:10:37 +08:00
sdspi_host.c spi_master: move the spi_bus_init function into common header 2019-06-27 13:27:26 +08:00
sdspi_private.h sdmmc: support SDIO over SPI 2019-04-12 02:24:28 +08:00
sdspi_transaction.c all: Using xxx_periph.h 2019-06-03 14:15:08 +08:00
sigmadelta.c all: Using xxx_periph.h 2019-06-03 14:15:08 +08:00
spi_common.c spi: move deprecated functions into internal header 2019-12-24 17:43:32 +08:00
spi_master.c spi: move deprecated functions into internal header 2019-12-24 17:43:32 +08:00
spi_slave.c spi: move deprecated functions into internal header 2019-12-24 17:43:32 +08:00
timer.c bugfix(driver): fix i2s and timergroup some issues 2019-12-31 11:02:35 +08:00
uart.c VFS: Check in select() if the UART driver is installed or not 2020-01-21 10:11:08 +01:00