66fb5a29bb
Apply the pre-commit hook whitespace fixes to all files in the repo. (Line endings, blank lines at end of file, trailing whitespace) |
||
---|---|---|
.. | ||
main | ||
CMakeLists.txt | ||
Makefile | ||
README.md |
WPA2 Enterprise Example
This example shows how ESP32 connects to AP with wpa2 enterprise encryption. Example does the following steps:
- Install CA certificate which is optional.
- Install client certificate and client key which is required in TLS method and optional in PEAP and TTLS methods.
- Set identity of phase 1 which is optional.
- Set user name and password of phase 2 which is required in PEAP and TTLS methods.
- Enable wpa2 enterprise.
- Connect to AP.
Note: 1. certificate currently is generated when compiling the example and then stored in flash. 2. The expiration date of the certificates is 2027/06/05.
The file wpa2_ca.pem, wpa2_ca.key, wpa2_server.pem, wpa2_server.crt and wpa2_server.key can be used to configure AP with
wpa2 enterprise encryption. The steps how to generate new certificates and keys using openssl is as follows:
- wpa2_ca.pem wpa2_ca.key: openssl req -new -x509 -keyout wpa2_ca.key -out wpa2_ca.pem
- wpa2_server.key: openssl req -new -key wpa2_server.key -out wpa2_server.csr
- wpa2_csr: openssl req -new -key server.key -out server.csr
- wpa2_server.crt: openssl ca -batch -keyfile wpa2_ca.key -cert wpa2_ca.pem -in wpa2_server.csr -key ca1234 -out wpa2_server.crt -extensions xpserver_ext -extfile xpextensions
- wpa2_server.p12: openssl pkcs12 -export -in wpa2_server.crt -inkey wpa2_server.key -out wpa2_server.p12 -passin pass:sv1234 -passout pass:sv1234
- wpa2_server.pem: openssl pkcs12 -in wpa2_server.p12 -out wpa2_server.pem -passin pass:sv1234 -passout pass:sv1234
- wpa2_client.key: openssl genrsa -out wpa2_client.key 1024
- wpa2_client.csr: openssl req -new -key wpa2_client.key -out wpa2_client.csr
- wpa2_client.crt: openssl ca -batch -keyfile wpa2_ca.key -cert wpa2_ca.pem -in wpa2_client.csr -key ca1234 -out wpa2_client.crt -extensions xpclient_ext -extfile xpextensions
- wpa2_client.p12: openssl pkcs12 -export -in wpa2_client.crt -inkey wpa2_client.key -out wpa2_client.p12
- wpa2_client.pem: openssl pkcs12 -in wpa2_client.p12 -out wpa2_client.pem
Example output
Here is an example of wpa2 enterprise(PEAP method) console output.
I (1352) example: Setting WiFi configuration SSID wpa2_test... I (1362) wpa: WPA2 ENTERPRISE VERSION: [v2.0] enable
I (1362) wifi: rx_ba=1 tx_ba=1
I (1372) wifi: mode : sta (24:0a:c4:03:b8:dc) I (3002) wifi: n:11 0, o:1 0, ap:255 255, sta:11 0, prof:11 I (3642) wifi: state: init -> auth (b0) I (3642) wifi: state: auth -> assoc (0) I (3652) wifi: state: assoc -> run (10) I (3652) wpa: wpa2_task prio:24, stack:6144
I (3972) wpa: >>>>>wpa2 FINISH
I (3982) wpa: wpa2 task delete
I (3992) wifi: connected with wpa2_test, channel 11 I (5372) example: ~~~~~~~~~~~ I (5372) example: IP:0.0.0.0 I (5372) example: MASK:0.0.0.0 I (5372) example: GW:0.0.0.0 I (5372) example: ~~~~~~~~~~~ I (6832) event: ip: 192.168.1.112, mask: 255.255.255.0, gw: 192.168.1.1 I (7372) example: ~~~~~~~~~~~ I (7372) example: IP:192.168.1.112 I (7372) example: MASK:255.255.255.0 I (7372) example: GW:192.168.1.1 I (7372) example: ~~~~~~~~~~~ I (9372) example: ~~~~~~~~~~~ I (9372) example: IP:192.168.1.112 I (9372) example: MASK:255.255.255.0 I (9372) example: GW:192.168.1.1 I (9372) example: ~~~~~~~~~~~