esp-idf/components/esp_system/port/arch/riscv/panic_arch.c
2021-11-06 17:33:44 +08:00

369 lines
12 KiB
C

/*
* SPDX-FileCopyrightText: 2020-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdio.h>
#include "esp_spi_flash.h"
#include "soc/extmem_reg.h"
#include "esp_private/panic_internal.h"
#include "esp_private/panic_reason.h"
#include "riscv/rvruntime-frames.h"
#include "cache_err_int.h"
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#if CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/memprot.h"
#elif CONFIG_IDF_TARGET_ESP32H2
#include "esp32h2/memprot.h"
#elif CONFIG_IDF_TARGET_ESP8684
#include "esp8684/memprot.h"
#endif
#endif
#if CONFIG_ESP_SYSTEM_USE_EH_FRAME
#include "eh_frame_parser.h"
#endif
#define DIM(array) (sizeof(array)/sizeof(*array))
/**
* Structure used to define a flag/bit to test in case of cache error.
* The message describes the cause of the error when the bit is set in
* a given status register.
*/
typedef struct {
const uint32_t bit;
const char *msg;
} register_bit_t;
/**
* Function to check each bits defined in the array reg_bits in the given
* status register. The first bit from the array to be set in the status
* register will have its associated message printed. This function returns
* true. If not bit was set in the register, it returns false.
* The order of the bits in the array is important as only the first bit to
* be set in the register will have its associated message printed.
*/
static inline bool test_and_print_register_bits(const uint32_t status,
const register_bit_t *reg_bits,
const uint32_t size)
{
/* Browse the flag/bit array and test each one with the given status
* register. */
for (int i = 0; i < size; i++) {
const uint32_t bit = reg_bits[i].bit;
if ((status & bit) == bit) {
/* Reason of the panic found, print the reason. */
panic_print_str(reg_bits[i].msg);
panic_print_str("\r\n");
return true;
}
}
/* Panic cause not found, no message was printed. */
return false;
}
/**
* Function called when a cache error occurs. It prints details such as the
* explanation of why the panic occured.
*/
static inline void print_cache_err_details(const void *frame)
{
/* Define the array that contains the status (bits) to test on the register
* EXTMEM_CORE0_ACS_CACHE_INT_ST_REG. each bit is accompanied by a small
* message.
* The messages have been pulled from the header file where the status bit
* are defined. */
const register_bit_t core0_acs_bits[] = {
{
.bit = EXTMEM_CORE0_DBUS_WR_ICACHE_ST,
.msg = "dbus tried to write cache"
},
{
.bit = EXTMEM_CORE0_DBUS_REJECT_ST,
.msg = "dbus authentication failed"
},
{
.bit = EXTMEM_CORE0_DBUS_ACS_MSK_ICACHE_ST,
.msg = "access to cache while dbus or cache is disabled"
},
{
.bit = EXTMEM_CORE0_IBUS_REJECT_ST,
.msg = "ibus authentication failed"
},
{
.bit = EXTMEM_CORE0_IBUS_WR_ICACHE_ST,
.msg = "ibus tried to write cache"
},
{
.bit = EXTMEM_CORE0_IBUS_ACS_MSK_ICACHE_ST,
.msg = "access to cache while ibus or cache is disabled"
},
};
/* Same goes for the register EXTMEM_CACHE_ILG_INT_ST_REG and its bits. */
const register_bit_t cache_ilg_bits[] = {
{
.bit = EXTMEM_MMU_ENTRY_FAULT_ST,
.msg = "MMU entry fault"
},
{
.bit = EXTMEM_ICACHE_PRELOAD_OP_FAULT_ST,
.msg = "preload configurations fault"
},
{
.bit = EXTMEM_ICACHE_SYNC_OP_FAULT_ST,
.msg = "sync configurations fault"
},
};
/* Read the status register EXTMEM_CORE0_ACS_CACHE_INT_ST_REG. This status
* register is not equal to 0 when a cache access error occured. */
const uint32_t core0_status = REG_READ(EXTMEM_CORE0_ACS_CACHE_INT_ST_REG);
/* If the panic is due to a cache access error, one of the bit of the
* register is set. Thus, this function will return true. */
bool handled = test_and_print_register_bits(core0_status, core0_acs_bits, DIM(core0_acs_bits));
/* If the panic was due to a cache illegal error, the previous call returned false and this
* EXTMEM_CACHE_ILG_INT_ST_REG register should not me equal to 0.
* Check each bit of it and print the message associated if found. */
if (!handled) {
const uint32_t cache_ilg_status = REG_READ(EXTMEM_CACHE_ILG_INT_ST_REG);
handled = test_and_print_register_bits(cache_ilg_status, cache_ilg_bits, DIM(cache_ilg_bits));
/* If the error was not found, print the both registers value */
if (!handled) {
panic_print_str("EXTMEM_CORE0_ACS_CACHE_INT_ST_REG = 0x");
panic_print_hex(core0_status);
panic_print_str("\r\nEXTMEM_CACHE_ILG_INT_ST_REG = 0x");
panic_print_hex(cache_ilg_status);
panic_print_str("\r\n");
}
}
}
/**
* Function called when a memory protection error occurs (PMS). It prints details such as the
* explanation of why the panic occured.
*/
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
static inline void print_memprot_err_details(const void *frame __attribute__((unused)))
{
//common memprot fault info
mem_type_prot_t mem_type = esp_memprot_get_active_intr_memtype();
panic_print_str( " memory type: ");
panic_print_str( esp_memprot_mem_type_to_str(mem_type) );
panic_print_str( "\r\n faulting address: 0x");
panic_print_hex( esp_memprot_get_violate_addr(mem_type) );
panic_print_str( "\r\n world:");
panic_print_dec( esp_memprot_get_violate_world(mem_type) );
char operation = 0;
// IRAM fault: check instruction-fetch flag
if ( mem_type == MEMPROT_IRAM0_SRAM ) {
if ( esp_memprot_get_violate_loadstore(mem_type) ) {
operation = 'X';
}
}
// W/R - common
if ( operation == 0 ) {
operation = esp_memprot_get_violate_wr(mem_type) == MEMPROT_PMS_OP_WRITE ? 'W' : 'R';
}
panic_print_str( "\r\n operation type: ");
panic_print_char( operation );
// DRAM/DMA fault: check byte-enables
if ( mem_type == MEMPROT_DRAM0_SRAM ) {
panic_print_str("\r\n byte-enables: " );
panic_print_hex(esp_memprot_get_violate_byte_en(mem_type));
}
panic_print_str("\r\n");
}
#endif
void panic_print_registers(const void *f, int core)
{
uint32_t *regs = (uint32_t *)f;
// only print ABI name
const char *desc[] = {
"MEPC ", "RA ", "SP ", "GP ", "TP ", "T0 ", "T1 ", "T2 ",
"S0/FP ", "S1 ", "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ",
"A6 ", "A7 ", "S2 ", "S3 ", "S4 ", "S5 ", "S6 ", "S7 ",
"S8 ", "S9 ", "S10 ", "S11 ", "T3 ", "T4 ", "T5 ", "T6 ",
"MSTATUS ", "MTVEC ", "MCAUSE ", "MTVAL ", "MHARTID "
};
panic_print_str("Core ");
panic_print_dec(((RvExcFrame *)f)->mhartid);
panic_print_str(" register dump:");
for (int x = 0; x < sizeof(desc) / sizeof(desc[0]); x += 4) {
panic_print_str("\r\n");
for (int y = 0; y < 4 && x + y < sizeof(desc) / sizeof(desc[0]); y++) {
if (desc[x + y][0] != 0) {
panic_print_str(desc[x + y]);
panic_print_str(": 0x");
panic_print_hex(regs[x + y]);
panic_print_str(" ");
}
}
}
}
/**
* This function will be called when a SoC-level panic occurs.
* SoC-level panics include cache errors and watchdog interrupts.
*/
void panic_soc_fill_info(void *f, panic_info_t *info)
{
RvExcFrame *frame = (RvExcFrame *) f;
/* Please keep in sync with PANIC_RSN_* defines */
static const char *pseudo_reason[PANIC_RSN_COUNT] = {
"Unknown reason",
"Interrupt wdt timeout on CPU0",
#if SOC_CPU_NUM > 1
"Interrupt wdt timeout on CPU1",
#endif
"Cache error",
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
"Memory protection fault",
#endif
};
info->reason = pseudo_reason[0];
info->addr = (void *) frame->mepc;
/* The mcause has been set by the CPU when the panic occured.
* All SoC-level panic will call this function, thus, this register
* lets us know which error was triggered. */
if (frame->mcause == ETS_CACHEERR_INUM) {
/* Panic due to a cache error, multiple cache error are possible,
* assign function print_cache_err_details to our structure's
* details field. As its name states, it will give more details
* about why the error happened. */
info->core = esp_cache_err_get_cpuid();
info->reason = pseudo_reason[PANIC_RSN_CACHEERR];
info->details = print_cache_err_details;
} else if (frame->mcause == ETS_T1_WDT_INUM) {
/* Watchdog interrupt occured, get the core on which it happened
* and update the reason/message accordingly. */
const int core = esp_cache_err_get_cpuid();
info->core = core;
info->exception = PANIC_EXCEPTION_IWDT;
#if SOC_CPU_NUM > 1
_Static_assert(PANIC_RSN_INTWDT_CPU0 + 1 == PANIC_RSN_INTWDT_CPU1,
"PANIC_RSN_INTWDT_CPU1 must be equal to PANIC_RSN_INTWDT_CPU0 + 1");
#endif
info->reason = pseudo_reason[PANIC_RSN_INTWDT_CPU0 + core];
}
#if CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
else if ( frame->mcause == ETS_MEMPROT_ERR_INUM ) {
info->core = esp_memprot_intr_get_cpuid();
info->reason = pseudo_reason[PANIC_RSN_MEMPROT];
info->details = print_memprot_err_details;
}
#endif
}
void panic_arch_fill_info(void *frame, panic_info_t *info)
{
RvExcFrame *regs = (RvExcFrame *) frame;
info->core = 0;
info->exception = PANIC_EXCEPTION_FAULT;
//Please keep in sync with PANIC_RSN_* defines
static const char *reason[] = {
"Instruction address misaligned",
"Instruction access fault",
"Illegal instruction",
"Breakpoint",
"Load address misaligned",
"Load access fault",
"Store address misaligned",
"Store access fault",
"Environment call from U-mode",
"Environment call from S-mode",
NULL,
"Environment call from M-mode",
"Instruction page fault",
"Load page fault",
NULL,
"Store page fault",
};
if (regs->mcause < (sizeof(reason) / sizeof(reason[0]))) {
if (reason[regs->mcause] != NULL) {
info->reason = (reason[regs->mcause]);
}
}
info->description = "Exception was unhandled.";
info->addr = (void *) regs->mepc;
info->frame = &regs;
}
static void panic_print_basic_backtrace(const void *frame, int core) {
// Basic backtrace
panic_print_str("\r\nStack memory:\r\n");
uint32_t sp = (uint32_t)((RvExcFrame *)frame)->sp;
const int per_line = 8;
for (int x = 0; x < 1024; x += per_line * sizeof(uint32_t)) {
uint32_t *spp = (uint32_t *)(sp + x);
panic_print_hex(sp + x);
panic_print_str(": ");
for (int y = 0; y < per_line; y++) {
panic_print_str("0x");
panic_print_hex(spp[y]);
panic_print_str(y == per_line - 1 ? "\r\n" : " ");
}
}
}
void panic_print_backtrace(const void *frame, int core)
{
#if CONFIG_ESP_SYSTEM_USE_EH_FRAME
if (!spi_flash_cache_enabled()) {
panic_print_str("\r\nWarning: SPI Flash cache is disabled, cannot process eh_frame parsing. "
"Falling back to basic backtrace.\r\n");
panic_print_basic_backtrace(frame, core);
} else {
esp_eh_frame_print_backtrace(frame);
}
#else
panic_print_basic_backtrace(frame, core);
#endif
}
uint32_t panic_get_address(const void *f)
{
return ((RvExcFrame *)f)->mepc;
}
uint32_t panic_get_cause(const void *f)
{
return ((RvExcFrame *)f)->mcause;
}
void panic_set_address(void *f, uint32_t addr)
{
((RvExcFrame *)f)->mepc = addr;
}