mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
72 lines
2.5 KiB
C
72 lines
2.5 KiB
C
/* Touch Pad Read Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/touch_pad.h"
|
|
|
|
#define TOUCH_PAD_NO_CHANGE (-1)
|
|
#define TOUCH_THRESH_NO_USE (0)
|
|
#define TOUCH_FILTER_MODE_EN (1)
|
|
#define TOUCHPAD_FILTER_TOUCH_PERIOD (10)
|
|
/*
|
|
Read values sensed at all available touch pads.
|
|
Print out values in a loop on a serial monitor.
|
|
*/
|
|
static void tp_example_read_task(void *pvParameter)
|
|
{
|
|
uint16_t touch_value;
|
|
uint16_t touch_filter_value;
|
|
#if TOUCH_FILTER_MODE_EN
|
|
printf("Touch Sensor filter mode read, the output format is: \nTouchpad num:[raw data, filtered data]\n\n");
|
|
#else
|
|
printf("Touch Sensor normal mode read, the output format is: \nTouchpad num:[raw data]\n\n");
|
|
#endif
|
|
while (1) {
|
|
for (int i = 0; i < TOUCH_PAD_MAX; i++) {
|
|
#if TOUCH_FILTER_MODE_EN
|
|
// If open the filter mode, please use this API to get the touch pad count.
|
|
ESP_ERROR_CHECK(touch_pad_read_raw_data(i, &touch_value));
|
|
ESP_ERROR_CHECK(touch_pad_read_filtered(i, &touch_filter_value));
|
|
printf("T%d:[%4d,%4d] ", i, touch_value, touch_filter_value);
|
|
#else
|
|
ESP_ERROR_CHECK(touch_pad_read(i, &touch_value));
|
|
printf("T%d:[%4d] ", i, touch_value);
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
vTaskDelay(200 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
|
|
static void tp_example_touch_pad_init()
|
|
{
|
|
for (int i = 0;i< TOUCH_PAD_MAX;i++) {
|
|
touch_pad_config(i, TOUCH_THRESH_NO_USE);
|
|
}
|
|
}
|
|
|
|
void app_main()
|
|
{
|
|
// Initialize touch pad peripheral.
|
|
// The default fsm mode is software trigger mode.
|
|
touch_pad_init();
|
|
// Set reference voltage for charging/discharging
|
|
// In this case, the high reference valtage will be 2.7V - 1V = 1.7V
|
|
// The low reference voltage will be 0.5
|
|
// The larger the range, the larger the pulse count value.
|
|
touch_pad_set_voltage(TOUCH_HVOLT_2V7, TOUCH_LVOLT_0V5, TOUCH_HVOLT_ATTEN_1V);
|
|
#if TOUCH_FILTER_MODE_EN
|
|
touch_pad_filter_start(TOUCHPAD_FILTER_TOUCH_PERIOD);
|
|
#endif
|
|
tp_example_touch_pad_init();
|
|
// Start task to read values sensed by pads
|
|
xTaskCreate(&tp_example_read_task, "touch_pad_read_task", 2048, NULL, 5, NULL);
|
|
}
|