esp-idf/components/nvs_flash/include/nvs.h
2020-12-15 08:11:49 +05:30

560 lines
27 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef ESP_NVS_H
#define ESP_NVS_H
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
#include "esp_attr.h"
#include "esp_err.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Opaque pointer type representing non-volatile storage handle
*/
typedef uint32_t nvs_handle_t;
/*
* Pre-IDF V4.0 uses nvs_handle, so leaving the original typedef here for compatibility.
*/
typedef nvs_handle_t nvs_handle IDF_DEPRECATED("Replace with nvs_handle_t");
#define ESP_ERR_NVS_BASE 0x1100 /*!< Starting number of error codes */
#define ESP_ERR_NVS_NOT_INITIALIZED (ESP_ERR_NVS_BASE + 0x01) /*!< The storage driver is not initialized */
#define ESP_ERR_NVS_NOT_FOUND (ESP_ERR_NVS_BASE + 0x02) /*!< Id namespace doesnt exist yet and mode is NVS_READONLY */
#define ESP_ERR_NVS_TYPE_MISMATCH (ESP_ERR_NVS_BASE + 0x03) /*!< The type of set or get operation doesn't match the type of value stored in NVS */
#define ESP_ERR_NVS_READ_ONLY (ESP_ERR_NVS_BASE + 0x04) /*!< Storage handle was opened as read only */
#define ESP_ERR_NVS_NOT_ENOUGH_SPACE (ESP_ERR_NVS_BASE + 0x05) /*!< There is not enough space in the underlying storage to save the value */
#define ESP_ERR_NVS_INVALID_NAME (ESP_ERR_NVS_BASE + 0x06) /*!< Namespace name doesnt satisfy constraints */
#define ESP_ERR_NVS_INVALID_HANDLE (ESP_ERR_NVS_BASE + 0x07) /*!< Handle has been closed or is NULL */
#define ESP_ERR_NVS_REMOVE_FAILED (ESP_ERR_NVS_BASE + 0x08) /*!< The value wasnt updated because flash write operation has failed. The value was written however, and update will be finished after re-initialization of nvs, provided that flash operation doesnt fail again. */
#define ESP_ERR_NVS_KEY_TOO_LONG (ESP_ERR_NVS_BASE + 0x09) /*!< Key name is too long */
#define ESP_ERR_NVS_PAGE_FULL (ESP_ERR_NVS_BASE + 0x0a) /*!< Internal error; never returned by nvs API functions */
#define ESP_ERR_NVS_INVALID_STATE (ESP_ERR_NVS_BASE + 0x0b) /*!< NVS is in an inconsistent state due to a previous error. Call nvs_flash_init and nvs_open again, then retry. */
#define ESP_ERR_NVS_INVALID_LENGTH (ESP_ERR_NVS_BASE + 0x0c) /*!< String or blob length is not sufficient to store data */
#define ESP_ERR_NVS_NO_FREE_PAGES (ESP_ERR_NVS_BASE + 0x0d) /*!< NVS partition doesn't contain any empty pages. This may happen if NVS partition was truncated. Erase the whole partition and call nvs_flash_init again. */
#define ESP_ERR_NVS_VALUE_TOO_LONG (ESP_ERR_NVS_BASE + 0x0e) /*!< String or blob length is longer than supported by the implementation */
#define ESP_ERR_NVS_PART_NOT_FOUND (ESP_ERR_NVS_BASE + 0x0f) /*!< Partition with specified name is not found in the partition table */
#define ESP_ERR_NVS_NEW_VERSION_FOUND (ESP_ERR_NVS_BASE + 0x10) /*!< NVS partition contains data in new format and cannot be recognized by this version of code */
#define ESP_ERR_NVS_XTS_ENCR_FAILED (ESP_ERR_NVS_BASE + 0x11) /*!< XTS encryption failed while writing NVS entry */
#define ESP_ERR_NVS_XTS_DECR_FAILED (ESP_ERR_NVS_BASE + 0x12) /*!< XTS decryption failed while reading NVS entry */
#define ESP_ERR_NVS_XTS_CFG_FAILED (ESP_ERR_NVS_BASE + 0x13) /*!< XTS configuration setting failed */
#define ESP_ERR_NVS_XTS_CFG_NOT_FOUND (ESP_ERR_NVS_BASE + 0x14) /*!< XTS configuration not found */
#define ESP_ERR_NVS_ENCR_NOT_SUPPORTED (ESP_ERR_NVS_BASE + 0x15) /*!< NVS encryption is not supported in this version */
#define ESP_ERR_NVS_KEYS_NOT_INITIALIZED (ESP_ERR_NVS_BASE + 0x16) /*!< NVS key partition is uninitialized */
#define ESP_ERR_NVS_CORRUPT_KEY_PART (ESP_ERR_NVS_BASE + 0x17) /*!< NVS key partition is corrupt */
#define ESP_ERR_NVS_WRONG_ENCRYPTION (ESP_ERR_NVS_BASE + 0x19) /*!< NVS partition is marked as encrypted with generic flash encryption. This is forbidden since the NVS encryption works differently. */
#define ESP_ERR_NVS_CONTENT_DIFFERS (ESP_ERR_NVS_BASE + 0x18) /*!< Internal error; never returned by nvs API functions. NVS key is different in comparison */
#define NVS_DEFAULT_PART_NAME "nvs" /*!< Default partition name of the NVS partition in the partition table */
#define NVS_PART_NAME_MAX_SIZE 16 /*!< maximum length of partition name (excluding null terminator) */
#define NVS_KEY_NAME_MAX_SIZE 16 /*!< Maximal length of NVS key name (including null terminator) */
/**
* @brief Mode of opening the non-volatile storage
*/
typedef enum {
NVS_READONLY, /*!< Read only */
NVS_READWRITE /*!< Read and write */
} nvs_open_mode_t;
/*
* Pre-IDF V4.0 uses nvs_open_mode, so leaving the original typedef here for compatibility.
*/
typedef nvs_open_mode_t nvs_open_mode IDF_DEPRECATED("Replace with nvs_open_mode_t");
/**
* @brief Types of variables
*
*/
typedef enum {
NVS_TYPE_U8 = 0x01, /*!< Type uint8_t */
NVS_TYPE_I8 = 0x11, /*!< Type int8_t */
NVS_TYPE_U16 = 0x02, /*!< Type uint16_t */
NVS_TYPE_I16 = 0x12, /*!< Type int16_t */
NVS_TYPE_U32 = 0x04, /*!< Type uint32_t */
NVS_TYPE_I32 = 0x14, /*!< Type int32_t */
NVS_TYPE_U64 = 0x08, /*!< Type uint64_t */
NVS_TYPE_I64 = 0x18, /*!< Type int64_t */
NVS_TYPE_STR = 0x21, /*!< Type string */
NVS_TYPE_BLOB = 0x42, /*!< Type blob */
NVS_TYPE_ANY = 0xff /*!< Must be last */
} nvs_type_t;
/**
* @brief information about entry obtained from nvs_entry_info function
*/
typedef struct {
char namespace_name[16]; /*!< Namespace to which key-value belong */
char key[16]; /*!< Key of stored key-value pair */
nvs_type_t type; /*!< Type of stored key-value pair */
} nvs_entry_info_t;
/**
* Opaque pointer type representing iterator to nvs entries
*/
typedef struct nvs_opaque_iterator_t *nvs_iterator_t;
/**
* @brief Open non-volatile storage with a given namespace from the default NVS partition
*
* Multiple internal ESP-IDF and third party application modules can store
* their key-value pairs in the NVS module. In order to reduce possible
* conflicts on key names, each module can use its own namespace.
* The default NVS partition is the one that is labelled "nvs" in the partition
* table.
*
* @param[in] name Namespace name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param[in] open_mode NVS_READWRITE or NVS_READONLY. If NVS_READONLY, will
* open a handle for reading only. All write requests will
* be rejected for this handle.
* @param[out] out_handle If successful (return code is zero), handle will be
* returned in this argument.
*
* @return
* - ESP_OK if storage handle was opened successfully
* - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized
* - ESP_ERR_NVS_PART_NOT_FOUND if the partition with label "nvs" is not found
* - ESP_ERR_NVS_NOT_FOUND id namespace doesn't exist yet and
* mode is NVS_READONLY
* - ESP_ERR_NVS_INVALID_NAME if namespace name doesn't satisfy constraints
* - ESP_ERR_NO_MEM in case memory could not be allocated for the internal structures
* - other error codes from the underlying storage driver
*/
esp_err_t nvs_open(const char* name, nvs_open_mode_t open_mode, nvs_handle_t *out_handle);
/**
* @brief Open non-volatile storage with a given namespace from specified partition
*
* The behaviour is same as nvs_open() API. However this API can operate on a specified NVS
* partition instead of default NVS partition. Note that the specified partition must be registered
* with NVS using nvs_flash_init_partition() API.
*
* @param[in] part_name Label (name) of the partition of interest for object read/write/erase
* @param[in] name Namespace name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param[in] open_mode NVS_READWRITE or NVS_READONLY. If NVS_READONLY, will
* open a handle for reading only. All write requests will
* be rejected for this handle.
* @param[out] out_handle If successful (return code is zero), handle will be
* returned in this argument.
*
* @return
* - ESP_OK if storage handle was opened successfully
* - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized
* - ESP_ERR_NVS_PART_NOT_FOUND if the partition with specified name is not found
* - ESP_ERR_NVS_NOT_FOUND id namespace doesn't exist yet and
* mode is NVS_READONLY
* - ESP_ERR_NVS_INVALID_NAME if namespace name doesn't satisfy constraints
* - ESP_ERR_NO_MEM in case memory could not be allocated for the internal structures
* - other error codes from the underlying storage driver
*/
esp_err_t nvs_open_from_partition(const char *part_name, const char* name, nvs_open_mode_t open_mode, nvs_handle_t *out_handle);
/**@{*/
/**
* @brief set value for given key
*
* This family of functions set value for the key, given its name. Note that
* actual storage will not be updated until nvs_commit function is called.
*
* @param[in] handle Handle obtained from nvs_open function.
* Handles that were opened read only cannot be used.
* @param[in] key Key name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param[in] value The value to set.
* For strings, the maximum length (including null character) is
* 4000 bytes.
*
* @return
* - ESP_OK if value was set successfully
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_READ_ONLY if storage handle was opened as read only
* - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints
* - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is not enough space in the
* underlying storage to save the value
* - ESP_ERR_NVS_REMOVE_FAILED if the value wasn't updated because flash
* write operation has failed. The value was written however, and
* update will be finished after re-initialization of nvs, provided that
* flash operation doesn't fail again.
* - ESP_ERR_NVS_VALUE_TOO_LONG if the string value is too long
*/
esp_err_t nvs_set_i8 (nvs_handle_t handle, const char* key, int8_t value);
esp_err_t nvs_set_u8 (nvs_handle_t handle, const char* key, uint8_t value);
esp_err_t nvs_set_i16 (nvs_handle_t handle, const char* key, int16_t value);
esp_err_t nvs_set_u16 (nvs_handle_t handle, const char* key, uint16_t value);
esp_err_t nvs_set_i32 (nvs_handle_t handle, const char* key, int32_t value);
esp_err_t nvs_set_u32 (nvs_handle_t handle, const char* key, uint32_t value);
esp_err_t nvs_set_i64 (nvs_handle_t handle, const char* key, int64_t value);
esp_err_t nvs_set_u64 (nvs_handle_t handle, const char* key, uint64_t value);
esp_err_t nvs_set_str (nvs_handle_t handle, const char* key, const char* value);
/**@}*/
/**
* @brief set variable length binary value for given key
*
* This family of functions set value for the key, given its name. Note that
* actual storage will not be updated until nvs_commit function is called.
*
* @param[in] handle Handle obtained from nvs_open function.
* Handles that were opened read only cannot be used.
* @param[in] key Key name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param[in] value The value to set.
* @param[in] length length of binary value to set, in bytes; Maximum length is
* 508000 bytes or (97.6% of the partition size - 4000) bytes
* whichever is lower.
*
* @return
* - ESP_OK if value was set successfully
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_READ_ONLY if storage handle was opened as read only
* - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints
* - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is not enough space in the
* underlying storage to save the value
* - ESP_ERR_NVS_REMOVE_FAILED if the value wasn't updated because flash
* write operation has failed. The value was written however, and
* update will be finished after re-initialization of nvs, provided that
* flash operation doesn't fail again.
* - ESP_ERR_NVS_VALUE_TOO_LONG if the value is too long
*/
esp_err_t nvs_set_blob(nvs_handle_t handle, const char* key, const void* value, size_t length);
/**@{*/
/**
* @brief get value for given key
*
* These functions retrieve value for the key, given its name. If key does not
* exist, or the requested variable type doesn't match the type which was used
* when setting a value, an error is returned.
*
* In case of any error, out_value is not modified.
*
* All functions expect out_value to be a pointer to an already allocated variable
* of the given type.
*
* \code{c}
* // Example of using nvs_get_i32:
* int32_t max_buffer_size = 4096; // default value
* esp_err_t err = nvs_get_i32(my_handle, "max_buffer_size", &max_buffer_size);
* assert(err == ESP_OK || err == ESP_ERR_NVS_NOT_FOUND);
* // if ESP_ERR_NVS_NOT_FOUND was returned, max_buffer_size will still
* // have its default value.
*
* \endcode
*
* @param[in] handle Handle obtained from nvs_open function.
* @param[in] key Key name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param out_value Pointer to the output value.
* May be NULL for nvs_get_str and nvs_get_blob, in this
* case required length will be returned in length argument.
*
* @return
* - ESP_OK if the value was retrieved successfully
* - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints
* - ESP_ERR_NVS_INVALID_LENGTH if length is not sufficient to store data
*/
esp_err_t nvs_get_i8 (nvs_handle_t handle, const char* key, int8_t* out_value);
esp_err_t nvs_get_u8 (nvs_handle_t handle, const char* key, uint8_t* out_value);
esp_err_t nvs_get_i16 (nvs_handle_t handle, const char* key, int16_t* out_value);
esp_err_t nvs_get_u16 (nvs_handle_t handle, const char* key, uint16_t* out_value);
esp_err_t nvs_get_i32 (nvs_handle_t handle, const char* key, int32_t* out_value);
esp_err_t nvs_get_u32 (nvs_handle_t handle, const char* key, uint32_t* out_value);
esp_err_t nvs_get_i64 (nvs_handle_t handle, const char* key, int64_t* out_value);
esp_err_t nvs_get_u64 (nvs_handle_t handle, const char* key, uint64_t* out_value);
/**@}*/
/**
* @brief get value for given key
*
* These functions retrieve the data of an entry, given its key. If key does not
* exist, or the requested variable type doesn't match the type which was used
* when setting a value, an error is returned.
*
* In case of any error, out_value is not modified.
*
* All functions expect out_value to be a pointer to an already allocated variable
* of the given type.
*
* nvs_get_str and nvs_get_blob functions support WinAPI-style length queries.
* To get the size necessary to store the value, call nvs_get_str or nvs_get_blob
* with zero out_value and non-zero pointer to length. Variable pointed to
* by length argument will be set to the required length. For nvs_get_str,
* this length includes the zero terminator. When calling nvs_get_str and
* nvs_get_blob with non-zero out_value, length has to be non-zero and has to
* point to the length available in out_value.
* It is suggested that nvs_get/set_str is used for zero-terminated C strings, and
* nvs_get/set_blob used for arbitrary data structures.
*
* \code{c}
* // Example (without error checking) of using nvs_get_str to get a string into dynamic array:
* size_t required_size;
* nvs_get_str(my_handle, "server_name", NULL, &required_size);
* char* server_name = malloc(required_size);
* nvs_get_str(my_handle, "server_name", server_name, &required_size);
*
* // Example (without error checking) of using nvs_get_blob to get a binary data
* into a static array:
* uint8_t mac_addr[6];
* size_t size = sizeof(mac_addr);
* nvs_get_blob(my_handle, "dst_mac_addr", mac_addr, &size);
* \endcode
*
* @param[in] handle Handle obtained from nvs_open function.
* @param[in] key Key name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
* @param out_value Pointer to the output value.
* May be NULL for nvs_get_str and nvs_get_blob, in this
* case required length will be returned in length argument.
* @param[inout] length A non-zero pointer to the variable holding the length of out_value.
* In case out_value a zero, will be set to the length
* required to hold the value. In case out_value is not
* zero, will be set to the actual length of the value
* written. For nvs_get_str this includes zero terminator.
*
* @return
* - ESP_OK if the value was retrieved successfully
* - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints
* - ESP_ERR_NVS_INVALID_LENGTH if length is not sufficient to store data
*/
/**@{*/
esp_err_t nvs_get_str (nvs_handle_t handle, const char* key, char* out_value, size_t* length);
esp_err_t nvs_get_blob(nvs_handle_t handle, const char* key, void* out_value, size_t* length);
/**@}*/
/**
* @brief Erase key-value pair with given key name.
*
* Note that actual storage may not be updated until nvs_commit function is called.
*
* @param[in] handle Storage handle obtained with nvs_open.
* Handles that were opened read only cannot be used.
*
* @param[in] key Key name. Maximal length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty.
*
* @return
* - ESP_OK if erase operation was successful
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_READ_ONLY if handle was opened as read only
* - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist
* - other error codes from the underlying storage driver
*/
esp_err_t nvs_erase_key(nvs_handle_t handle, const char* key);
/**
* @brief Erase all key-value pairs in a namespace
*
* Note that actual storage may not be updated until nvs_commit function is called.
*
* @param[in] handle Storage handle obtained with nvs_open.
* Handles that were opened read only cannot be used.
*
* @return
* - ESP_OK if erase operation was successful
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - ESP_ERR_NVS_READ_ONLY if handle was opened as read only
* - other error codes from the underlying storage driver
*/
esp_err_t nvs_erase_all(nvs_handle_t handle);
/**
* @brief Write any pending changes to non-volatile storage
*
* After setting any values, nvs_commit() must be called to ensure changes are written
* to non-volatile storage. Individual implementations may write to storage at other times,
* but this is not guaranteed.
*
* @param[in] handle Storage handle obtained with nvs_open.
* Handles that were opened read only cannot be used.
*
* @return
* - ESP_OK if the changes have been written successfully
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL
* - other error codes from the underlying storage driver
*/
esp_err_t nvs_commit(nvs_handle_t handle);
/**
* @brief Close the storage handle and free any allocated resources
*
* This function should be called for each handle opened with nvs_open once
* the handle is not in use any more. Closing the handle may not automatically
* write the changes to nonvolatile storage. This has to be done explicitly using
* nvs_commit function.
* Once this function is called on a handle, the handle should no longer be used.
*
* @param[in] handle Storage handle to close
*/
void nvs_close(nvs_handle_t handle);
/**
* @note Info about storage space NVS.
*/
typedef struct {
size_t used_entries; /**< Amount of used entries. */
size_t free_entries; /**< Amount of free entries. */
size_t total_entries; /**< Amount all available entries. */
size_t namespace_count; /**< Amount name space. */
} nvs_stats_t;
/**
* @brief Fill structure nvs_stats_t. It provides info about used memory the partition.
*
* This function calculates to runtime the number of used entries, free entries, total entries,
* and amount namespace in partition.
*
* \code{c}
* // Example of nvs_get_stats() to get the number of used entries and free entries:
* nvs_stats_t nvs_stats;
* nvs_get_stats(NULL, &nvs_stats);
* printf("Count: UsedEntries = (%d), FreeEntries = (%d), AllEntries = (%d)\n",
nvs_stats.used_entries, nvs_stats.free_entries, nvs_stats.total_entries);
* \endcode
*
* @param[in] part_name Partition name NVS in the partition table.
* If pass a NULL than will use NVS_DEFAULT_PART_NAME ("nvs").
*
* @param[out] nvs_stats Returns filled structure nvs_states_t.
* It provides info about used memory the partition.
*
*
* @return
* - ESP_OK if the changes have been written successfully.
* Return param nvs_stats will be filled.
* - ESP_ERR_NVS_PART_NOT_FOUND if the partition with label "name" is not found.
* Return param nvs_stats will be filled 0.
* - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized.
* Return param nvs_stats will be filled 0.
* - ESP_ERR_INVALID_ARG if nvs_stats equal to NULL.
* - ESP_ERR_INVALID_STATE if there is page with the status of INVALID.
* Return param nvs_stats will be filled not with correct values because
* not all pages will be counted. Counting will be interrupted at the first INVALID page.
*/
esp_err_t nvs_get_stats(const char *part_name, nvs_stats_t *nvs_stats);
/**
* @brief Calculate all entries in a namespace.
*
* Note that to find out the total number of records occupied by the namespace,
* add one to the returned value used_entries (if err is equal to ESP_OK).
* Because the name space entry takes one entry.
*
* \code{c}
* // Example of nvs_get_used_entry_count() to get amount of all key-value pairs in one namespace:
* nvs_handle_t handle;
* nvs_open("namespace1", NVS_READWRITE, &handle);
* ...
* size_t used_entries;
* size_t total_entries_namespace;
* if(nvs_get_used_entry_count(handle, &used_entries) == ESP_OK){
* // the total number of records occupied by the namespace
* total_entries_namespace = used_entries + 1;
* }
* \endcode
*
* @param[in] handle Handle obtained from nvs_open function.
*
* @param[out] used_entries Returns amount of used entries from a namespace.
*
*
* @return
* - ESP_OK if the changes have been written successfully.
* Return param used_entries will be filled valid value.
* - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized.
* Return param used_entries will be filled 0.
* - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL.
* Return param used_entries will be filled 0.
* - ESP_ERR_INVALID_ARG if used_entries equal to NULL.
* - Other error codes from the underlying storage driver.
* Return param used_entries will be filled 0.
*/
esp_err_t nvs_get_used_entry_count(nvs_handle_t handle, size_t* used_entries);
/**
* @brief Create an iterator to enumerate NVS entries based on one or more parameters
*
* \code{c}
* // Example of listing all the key-value pairs of any type under specified partition and namespace
* nvs_iterator_t it = nvs_entry_find(partition, namespace, NVS_TYPE_ANY);
* while (it != NULL) {
* nvs_entry_info_t info;
* nvs_entry_info(it, &info);
* it = nvs_entry_next(it);
* printf("key '%s', type '%d' \n", info.key, info.type);
* };
* // Note: no need to release iterator obtained from nvs_entry_find function when
* // nvs_entry_find or nvs_entry_next function return NULL, indicating no other
* // element for specified criteria was found.
* }
* \endcode
*
* @param[in] part_name Partition name
*
* @param[in] namespace_name Set this value if looking for entries with
* a specific namespace. Pass NULL otherwise.
*
* @param[in] type One of nvs_type_t values.
*
* @return
* Iterator used to enumerate all the entries found,
* or NULL if no entry satisfying criteria was found.
* Iterator obtained through this function has to be released
* using nvs_release_iterator when not used any more.
*/
nvs_iterator_t nvs_entry_find(const char *part_name, const char *namespace_name, nvs_type_t type);
/**
* @brief Returns next item matching the iterator criteria, NULL if no such item exists.
*
* Note that any copies of the iterator will be invalid after this call.
*
* @param[in] iterator Iterator obtained from nvs_entry_find function. Must be non-NULL.
*
* @return
* NULL if no entry was found, valid nvs_iterator_t otherwise.
*/
nvs_iterator_t nvs_entry_next(nvs_iterator_t iterator);
/**
* @brief Fills nvs_entry_info_t structure with information about entry pointed to by the iterator.
*
* @param[in] iterator Iterator obtained from nvs_entry_find or nvs_entry_next function. Must be non-NULL.
*
* @param[out] out_info Structure to which entry information is copied.
*/
void nvs_entry_info(nvs_iterator_t iterator, nvs_entry_info_t *out_info);
/**
* @brief Release iterator
*
* @param[in] iterator Release iterator obtained from nvs_entry_find function. NULL argument is allowed.
*
*/
void nvs_release_iterator(nvs_iterator_t iterator);
#ifdef __cplusplus
} // extern "C"
#endif
#endif //ESP_NVS_H