esp-idf/examples/network/simple_sniffer/main/Kconfig.projbuild

275 lines
10 KiB
Plaintext

menu "Example Configuration"
orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"
config SNIFFER_STORE_HISTORY
bool "Store command history into flash"
default y
help
Linenoise line editing library provides functions to save and load command history.
If this option is enabled, initalizes a FAT filesystem and uses it to store command history.
choice SNIFFER_PCAP_DESTINATION
prompt "Select destination to store pcap file"
default SNIFFER_PCAP_DESTINATION_SD
help
Select where to store the pcap file.
Currently support storing files to SD card or to host via JTAG interface with 'Trace memory' enabled.
config SNIFFER_PCAP_DESTINATION_SD
bool "SD Card"
help
Store pcap file to SD card.
config SNIFFER_PCAP_DESTINATION_JTAG
bool "JTAG (App Trace)"
depends on APPTRACE_DEST_TRAX
help
Store pcap file to host via JTAG interface.
config SNIFFER_PCAP_DESTINATION_MEMORY
bool "Memory"
help
Store pcap file to memory.
endchoice
if SNIFFER_PCAP_DESTINATION_SD
choice SNIFFER_SD_MODE
prompt "Select SD card work mode"
default SNIFFER_SD_SDMMC_MODE
help
Select whitch peripheral SD card should use.
config SNIFFER_SD_SDMMC_MODE
bool "SDMMC"
depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S3
help
Use SDMMC mode (Not support on esp32c3).
config SNIFFER_SD_SPI_MODE
bool "SPI"
help
Use SPI mode.
endchoice
config SNIFFER_MOUNT_POINT
string "SD card mount point in the filesystem"
default "/sdcard"
help
Specify the mount point in the VFS (Virtual File System) for SD card.
config SNIFFER_PCAP_FILE_NAME_MAX_LEN
int "Max name length of pcap file"
default 32
help
Specify maximum name length of pcap file.
endif
if SNIFFER_PCAP_DESTINATION_MEMORY
config SNIFFER_PCAP_MEMORY_SIZE
int "Memory size of the '.pcap' file in memory"
default 4096
help
Max memory size to storage packet in memory.
endif
config SNIFFER_WORK_QUEUE_LEN
int "Length of sniffer work queue"
default 128
help
The sniffer callback function should not do heavy work, so we put all heavy IO operation to another task.
The task gets some basic info of sniffer packet via queue.
Here you should specify the length of queue.
config SNIFFER_TASK_STACK_SIZE
int "Stack size of sniffer task"
default 4096
help
Stack size of sniffer task.
config SNIFFER_TASK_PRIORITY
int "Priority of sniffer task"
default 2
help
Priority of sniffer task.
config SNIFFER_USE_SPI_ETHERNET
bool
choice SNIFFER_ETHERNET_TYPE
prompt "Ethernet Type"
default SNIFFER_NO_ETHERNET
help
Select which kind of Ethernet will be used in the example.
config SNIFFER_NO_ETHERNET
bool "No Ethernet"
help
No Ethernet.
config SNIFFER_USE_INTERNAL_ETHERNET
depends on IDF_TARGET_ESP32
select ETH_USE_ESP32_EMAC
bool "Internal EMAC"
help
Select internal Ethernet MAC controller.
config SNIFFER_USE_DM9051
bool "DM9051 Module"
select SNIFFER_USE_SPI_ETHERNET
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_DM9051
help
Select external SPI-Ethernet module (DM9051).
config SNIFFER_USE_W5500
bool "W5500 Module"
select SNIFFER_USE_SPI_ETHERNET
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_W5500
help
Select external SPI-Ethernet module (W5500).
config SNIFFER_USE_KSZ8851SNL
bool "KSZ8851SNL Module"
select SNIFFER_USE_SPI_ETHERNET
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_KSZ8851SNL
help
Select external SPI-Ethernet module (KSZ8851SNL).
endchoice # SNIFFER_ETHERNET_TYPE
if SNIFFER_USE_INTERNAL_ETHERNET
choice SNIFFER_ETH_PHY_MODEL
prompt "Ethernet PHY Device"
default SNIFFER_ETH_PHY_IP101
help
Select the Ethernet PHY device to use in the example.
config SNIFFER_ETH_PHY_IP101
bool "IP101"
help
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
config SNIFFER_ETH_PHY_RTL8201
bool "RTL8201/SR8201"
help
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
config SNIFFER_ETH_PHY_LAN87XX
bool "LAN87xx"
help
Below chips are supported:
LAN8710A is a small footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
flexPWR® Technology.
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
LAN8740A/LAN8741A is a small footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver
with HP Auto-MDIX and flexPWR® Technology.
LAN8742A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
flexPWR® Technology.
Goto https://www.microchip.com for more information about them.
config SNIFFER_ETH_PHY_DP83848
bool "DP83848"
help
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/DP83848J for more information about it.
config SNIFFER_ETH_PHY_KSZ80XX
bool "KSZ80xx"
help
With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
Ethernet Physical Layer Tranceivers (PHY).
The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
KSZ8051, KSZ8061, KSZ8081, KSZ8091
Goto https://www.microchip.com for more information about them.
endchoice # SNIFFER_ETH_PHY_MODEL
config SNIFFER_ETH_MDC_GPIO
int "SMI MDC GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
default 23
help
Set the GPIO number used by SMI MDC.
config SNIFFER_ETH_MDIO_GPIO
int "SMI MDIO GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
default 18
help
Set the GPIO number used by SMI MDIO.
endif # SNIFFER_USE_INTERNAL_ETHERNET
if SNIFFER_USE_SPI_ETHERNET
config SNIFFER_ETH_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
help
Set the SPI host used to communicate with the SPI Ethernet Controller.
config SNIFFER_ETH_SPI_SCLK_GPIO
int "SPI SCLK GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
default 14 if IDF_TARGET_ESP32
default 12 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 6 if IDF_TARGET_ESP32C3
help
Set the GPIO number used by SPI SCLK.
config SNIFFER_ETH_SPI_MOSI_GPIO
int "SPI MOSI GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
default 13 if IDF_TARGET_ESP32
default 11 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 7 if IDF_TARGET_ESP32C3
help
Set the GPIO number used by SPI MOSI.
config SNIFFER_ETH_SPI_MISO_GPIO
int "SPI MISO GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
default 12 if IDF_TARGET_ESP32
default 13 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
default 2 if IDF_TARGET_ESP32C3
help
Set the GPIO number used by SPI MISO.
config SNIFFER_ETH_SPI_CS_GPIO
int "SPI CS GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
default 15 if IDF_TARGET_ESP32
default 10 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
help
Set the GPIO number used by SPI CS.
config SNIFFER_ETH_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 5 80
default 12 if IDF_TARGET_ESP32 || IDF_TARGET_ESP32C3
default 36 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
help
Set the clock speed (MHz) of SPI interface.
config SNIFFER_ETH_SPI_INT_GPIO
int "Interrupt GPIO number"
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
default 4 if IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
help
Set the GPIO number used by the SPI Ethernet module interrupt line.
endif # SNIFFER_USE_SPI_ETHERNET
if !SNIFFER_NO_ETHERNET
config SNIFFER_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
range -1 ENV_GPIO_OUT_RANGE_MAX
default 5
help
Set the GPIO number used to reset PHY chip.
Set to -1 to disable PHY chip hardware reset.
config SNIFFER_ETH_PHY_ADDR
int "PHY Address"
range 0 31
default 1
help
Set PHY address according your board schematic.
endif # !SNIFFER_NO_ETHERNET
endmenu