esp-idf/examples/wifi
Nachiket Kukade 0148546df3 fix(esp_wifi): Enable FTM for ESP32C2, fix other FTM issues
Enable FTM for ESP32C2 and update wifi libs with below fixes -

1. Bugfixes in Initiator and Responder mode
2. Fix wrong RTT value in first FTM procedure without connection
3. Update FTM calibration values for ESP32S2, S3, C3 and C2
4. Update distance estimation logic
5. Add some useful command parameters in FTM example
6. Fix bug when number of FTM measurement frames received is more
   than (number_of_brusts * FTMs per brust).

Co-authored-by: Sarvesh Bodakhe <sarvesh.bodakhe@espressif.com>
2023-07-21 16:30:47 +05:30
..
espnow esp_wifi: fix espnow example add peer fail when config channel 2023-04-13 10:55:53 +08:00
fast_scan esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
ftm fix(esp_wifi): Enable FTM for ESP32C2, fix other FTM issues 2023-07-21 16:30:47 +05:30
getting_started CI: optimize wifi get started example test 2022-10-14 15:02:24 +08:00
iperf TWDT: Use the new TWDT Kconfig options in the examples and tests 2023-03-07 10:23:43 +08:00
power_save examples/wifi/power_save: use 1000Hz freertos tick to lower sleep time threshold 2023-03-06 11:51:55 +08:00
roaming esp_wifi: Remove -Wno-format compile option for FTM example, iperf example, roaming example 2022-12-23 11:14:12 +08:00
scan wpa_supplicant : Fix scan results for GCMP and GCMP-256 cipher. 2023-06-07 10:08:26 +05:30
smart_config esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
wifi_eap_fast esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
wifi_easy_connect/dpp-enrollee esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
wifi_enterprise esp_wifi: fix typo in wifi_enterprise example README 2023-03-08 13:18:24 +05:30
wps esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
wps_softap_registrar esp_exmaples: Update ESP32C2 chip in Readme 2022-12-19 14:15:24 +08:00
.build-test-rules.yml fix(esp_wifi): Enable FTM for ESP32C2, fix other FTM issues 2023-07-21 16:30:47 +05:30
README.md examples: create a new folder structure for generic network examples 2021-07-26 12:25:19 +02:00

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.