esp-idf/components/idf_test/integration_test/TC_IT_BLUEDROID_GAP.yml
2019-06-25 23:14:32 +08:00

1214 lines
35 KiB
YAML

.GAP_CASE: &GAP_CASE
SDK: ESP32_IDF
Test App: SSC_BLE
auto test: 'Yes'
category: Function
test point 1: basic function
initial condition: BLE_INIT2
test environment: SSC_T2_5
execution time: 0
module: BLUEDROID
sub module: GAP
version: v1 (2016-12-31)
CI ready: 'Yes'
level: Integration
allow fail: ''
.set_default_ble_name: &set_default_ble_name
LIST_MERGE:
- - "SSC SSC1 ble -S -z name -n <dut1_ble_name>"
- ["R SSC1 C +BLE:OK"]
.open_capture_nic: &open_capture_nic
LIST_MERGE:
- - "NIC BLENIC START <bt_capture_nic> bt+capture"
- ['R PC_COM C +NIC_START:OK']
.dut1_stop_adv: &dut1_stop_adv
LIST_MERGE:
- - "SSC SSC1 bleadv -D -z stop"
- ["R SSC1 C +BLEADV:"]
.dut1_start_adv: &dut1_start_adv
LIST_MERGE:
- - "SSC SSC1 bleadv -D -z start"
- ["R SSC1 C +BLEADV:Start,OK"]
.dut1_connect_to_dut2: &dut1_connect_to_dut2
LIST_MERGE:
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['P SSC1 C +BLECONN:GapConnect,OK', 'P SSC2 C +BLECONN:GapConnect,OK']
.set_default_adv_data: &set_default_adv_data
LIST_MERGE:
- - "SSC SSC1 bleadv -D -z stop"
- ["R SSC1 C +BLEADV:"]
- - "SSC SSC1 bleadv -L -c 0 -t 3"
- ["R SSC1 C +BLEADV:SetAdv,OK C +BLEADV:SetScanRes,OK"]
- - "SSC SSC1 bleadv -D -z start"
- ["R SSC1 C +BLEADV:Start,OK"]
.dut2_stop_adv: &dut2_stop_adv
LIST_MERGE:
- - "SSC SSC2 bleadv -D -z stop"
- ["R SSC2 C +BLEADV:"]
test cases:
- ID: BLUEDROID_GAP_01003
<<: *GAP_CASE
test point 2: BLE GAP param device name test
summary: ble set long device name for BLUEDROID
steps: |
1. DUT1 set 32 byte device name A
2. stop advertising
3. config scan response and start advertising
4. DUT2 do active scan
5. DUT1 set 33 bytes device name
6. stop advertising
7. config scan response and start advertising
8. DUT2 do active scan
expected result: |
1. succeed
2. succeed
3. succeed
4. DUT1 mac in scan result (device name is too long)
5. failed
6. succeed
7. succeed
8. DUT1 mac in scan result (device name is too long)
cmd set:
- ""
- - "SSC SSC1 ble -S -z name -n <dut1_ble_name_32>"
- ["R SSC1 C +BLE:OK"]
- *set_default_adv_data
- *dut2_stop_adv
- - "SSC SSC2 blescan -D -z start -t 3 -c 0 -s 1"
- ["R SSC2 P <dut1_bt_mac> C Complete"]
- - "SSC SSC1 ble -S -z name -n 123456789012345678901234567890123"
- ["R SSC1 C +BLE:ERROR"]
- *set_default_adv_data
- - "SSC SSC2 blescan -D -z start -t 3 -c 0 -s 1"
- ["R SSC2 P <dut1_bt_mac> C Complete"]
- ID: BLUEDROID_GAP_03003
<<: *GAP_CASE
test point 2: BLE GAP set advertise param
summary: ble set adv parameter own address type for BLUEDROID
steps: |
1. DUT1 stop advertise
2. DUT1 start adv with own address type public
3. PC do active scan and capture advertising report
4. repeat step 1-3 with own address type random, rpa_public, rpa_random
5. repeat step 1-3 with channel map not valid
expected result: |
1. succeed
2. succeed
3. get ADV_IND with DUT1 BT MAC
4. get ADV_IND with DUT1 BT MAC
5. can not get ADV_IND with DUT1 BT MAC
initial condition: BLE_INIT1
test environment: SSC_T1_3
cmd set:
- ""
- *set_default_ble_name
- - "SSC SSC1 bleadv -L -c 0 -t 3 -n 1"
- ["R SSC1 C +BLEADV:SetAdv,OK"]
- *open_capture_nic
- - LOOP 4 3 "[0,2,1,3]" "['PDU','PDU','NPDU','NPDU']"
- *dut1_stop_adv
- - "SSC SSC1 bleadv -D -z start -t 0 -o {%d}"
- ["R SSC1 C +BLEADV:OK"]
- - "HCITOOL 2 -i <hci_nic> lescan"
- - 'P PC_COM C +HCITOOL:OK'
- 'P BLENIC {%s} (HCIEvent.le_sub_event_code="LEAdvReport")(HCIEvent.event_type_0="ADV_IND")(HCIEvent.data_0.NameComplete=<dut1_ble_name>)(HCIEvent.address_0=<dut1_bt_mac>)'
- ID: BLUEDROID_GAP_03006
<<: *GAP_CASE
test point 2: BLE GAP set advertise param
summary: ble set paramters for SCAN_IND for BLUEDROID
steps: |
1. DUT1 stop advertise
2. DUT1 set incorrect adv interval for SCAN_IND
3. PC do active scan and capture advertising report
4. repeat step 1-3 with correct adv interval
expected result: |
1. succeed
2. succeed
3. can not get SCAN_IND with DUT1 BT MAC
4. get SCAN_IND with DUT1 BT MAC
initial condition: BLE_INIT1
test environment: SSC_T1_3
cmd set:
- ""
- *set_default_ble_name
- - "SSC SSC1 bleadv -L -c 0 -t 3"
- ["R SSC1 C +BLEADV:SetAdv,OK"]
- *open_capture_nic
- *dut1_stop_adv
- - LOOP 2 2 "['0x20-0x40','0xA0-0xB0']" "['PDU','PDU']"
- [""]
- - "SSC SSC1 bleadv -D -z start -t 2 -i {%s}"
- ["R SSC1 C +BLEADV:OK"]
- - "HCITOOL 2 -i <hci_nic> lescan"
- - 'P PC_COM C +HCITOOL:OK'
- 'P BLENIC {%s} (HCIEvent.le_sub_event_code="LEAdvReport")(HCIEvent.event_type_0="SCAN_IND")(HCIEvent.address_0=<dut1_bt_mac>)'
- ID: BLUEDROID_GAP_03007
<<: *GAP_CASE
test point 2: BLE GAP set advertise param
summary: ble set paramters for NONCONN_IND for BLUEDROID
steps: |
1. DUT1 stop advertise
2. DUT1 set incorrect adv interval for NONCONN_IND
3. PC do active scan and capture advertising report
4. repeat step 1-3 with correct adv interval
expected result: |
1. succeed
2. succeed
3. can not get SCAN_IND with DUT1 BT MAC
4. get SCAN_IND with DUT1 BT MAC
initial condition: BLE_INIT1
test environment: SSC_T1_3
cmd set:
- ""
- *set_default_ble_name
- - "SSC SSC1 bleadv -L -c 0 -t 3"
- ["R SSC1 C +BLEADV:SetAdv,OK"]
- *open_capture_nic
- *dut1_stop_adv
- - LOOP 2 2 "['0x20-0x40','0xA0-0xB0']" "['PDU','PDU']"
- [""]
- - "SSC SSC1 bleadv -D -z start -t 3 -i {%s}"
- ["R SSC1 C +BLEADV:OK"]
- - "HCITOOL 2 -i <hci_nic> lescan"
- - 'P PC_COM C +HCITOOL:OK'
- 'P BLENIC {%s} (HCIEvent.le_sub_event_code="LEAdvReport")(HCIEvent.event_type_0="NONCONN_IND")(HCIEvent.address_0=<dut1_bt_mac>)'
- ID: BLUEDROID_GAP_06001
<<: *GAP_CASE
test point 2: BLE GAP connect / disconnect
summary: ble connect as "client" and "server" for BLUEDROID
allow fail: 1/2
steps: |
1. DUT1 connect to DUT2 as "client"
2. DUT1 disconnected with DUT2
3. DUT1 start gatt server app
4. DUT1 connect to DUT2 as "server"
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
cmd set:
- ""
- *dut1_connect_to_dut2
- - "SSC SSC1 bleconn -D -p 0x10"
- ['R SSC1 C +BLE:CLOSE,OK']
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ['R SSC1 C +GATTS:LoadProfile,OK']
- - "SSC SSC2 bleadv -D -z start"
- ['R SSC2 C +BLEADV:OK']
- - "SSC SSC1 bleconn -C -p 0xA0 -a <dut2_bt_mac> -z server"
- ['R SSC1 C +BLECONN:GapConnect']
- ID: BLUEDROID_GAP_06002
<<: *GAP_CASE
test point 2: BLE GAP connect / disconnect
summary: ble disconnect as "client" and "server" for BLUEDROID
steps: |
1. DUT1 connect to DUT2 as "client"
2. DUT1 disconnected with DUT2 as "client"
3. DUT1 start gatt server app
4. DUT1 connect to DUT2 as client
5. DUT1 disconnect with DUT2 as "server"
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
cmd set:
- ""
- *dut1_connect_to_dut2
- - "SSC SSC1 bleconn -D -p 0x10"
- ['R SSC1 C +BLE:CLOSE,OK']
- - "SSC SSC2 bleadv -D -z start"
- ['R SSC2 C +BLEADV:OK']
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ['R SSC1 C +GATTS:LoadProfile,OK']
- *dut1_connect_to_dut2
- - "SSC SSC1 bleconn -D -p 0x10"
- ['R SSC1 C +BLE:CLOSE,OK']
- ID: BLUEDROID_GAP_06003
<<: *GAP_CASE
allow fail: 1/2
test point 2: BLE GAP connect / disconnect
summary: ble connect/disconnect to same connection multiple times for BLUEDROID
steps: |
1. DUT1 connect to DUT2 as "client"
2. DUT1 start gatt server app
3. DUT1 connect to DUT2 as "client" again
4. DUT1 connect to DUT2 as "server"
5. DUT1 disconnected with DUT2 as "client"
6. DUT1 disconnected with DUT2 as "server"
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. succeed
6. succeed
cmd set:
- ""
- *dut1_connect_to_dut2
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ['R SSC1 C +GATTS:LoadProfile,OK']
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLE:GattcOpen,OK']
- - "SSC SSC1 bleconn -C -p 0xA0 -a <dut2_bt_mac> -z server"
- ['R SSC1 C +BLE:GattsOpen,OK,00A0']
- - "SSC SSC1 bleconn -D -p 0x10"
- ['R SSC1 C +BLE:CLOSE,OK']
- - "SSC SSC1 bleconn -D -p 0xA0 -z server"
- ['R SSC1 C +BLE:GattsClose,OK']
- ID: BLUEDROID_GAP_06004
<<: *GAP_CASE
test point 2: BLE GAP connect / disconnect
summary: ble connect to invalid address for BLUEDROID
allow fail: 2/3
steps: |
1. DUT1 connect to invalid address
2. DUT1 connect to DUT2
expected result: |
1. failed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -C -p 0x10 -a 24:0a:c4:04:26:50"
- ['R SSC1 C +BLECONN:OK']
- - DELAY 30
- ['R SSC1 C +BLE:GattcOpen,ERROR']
- *dut1_connect_to_dut2
- ID: BLUEDROID_GAP_06005
<<: *GAP_CASE
test point 2: BLE GAP connect / disconnect
summary: ble connect/disconnect event to active app for BLUEDROID
steps: |
1. DUT1 create gatts app
2. DUT1 connect to DUT2 as "client"
3. DUT1 do disconnect as "server"
expected result: |
1. succeed
2. succeed, DUT1 and DUT2 gatts get connect event
3. DUT1 and DUT2 gatts get disconnect event
cmd set:
- ""
- - "SSC SSC1 gatts -S -z load -p 0xA0"
- ['R SSC1 C +GATTS:LoadProfile,OK']
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['P SSC1 C +BLECONN:GapConnect', 'P SSC2 C +BLECONN:GapConnect']
- - "SSC SSC1 bleconn -D -p 0xA0 -z server"
- ['P SSC1 C +BLE:GattsClose']
- ID: BLUEDROID_GAP_07001
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters by master for BLUEDROID
steps: |
1. update connect parameters by master
expected result: |
1. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["32"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07002
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters by slave for BLUEDROID
steps: |
1. update connect parameters by slave
expected result: |
1. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["32"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07003
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect parameters(timeout<(1+latency)*2*MAX_interval*1.25) for BLUEDROID
steps: |
1. update invalid connect parameters(timeout<(1+latency)*2*MAX_interval*1.25)
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["7-90"]
- ['']
- - latency=["1"]
- ['']
- - supervision_timeout=["41"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07004
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connnect parameters and interval within allowed range for BLUEDROID
steps: |
1. DUT1 update connection parametres and interval is 6-128
2. DUT1 update connection parametres and interval is 33-3200
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC1"]
- ['']
- - interval=["6-128","33-3200"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["50","1000"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07005
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters interval and interval out of allowed range for BLUEDROID
steps: |
1. DUT1 update invalid interval and interval is 16-3201
2. DUT1 update invalid interval and interval is 5-64
expected result: |
1. fail
2. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC1"]
- ['']
- - interval=["16-3201","5-64"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["32","32"]
- ['']
- - expect_result=["ERROR","ERROR"]
- ['']
- ID: BLUEDROID_GAP_07006
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters latency and latency within allowed range and timeout<(1+latency)*2*MAX_interval*1.25 for BLUEDROID
steps: |
1. DUT1 update connect parameters latency and latency within allowed range and timeout<(1+latency)*2*MAX_interval*1.25
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["8"]
- ['']
- - supervision_timeout=["32"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07007
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters latency and latency = 501
steps: |
1. DUT1 uupdate connect parameters latency and latency = 501
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["6-8"]
- ['']
- - latency=["501"]
- ['']
- - supervision_timeout=["1003"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07008
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters latency and latency = 500 for BLUEDROID
steps: |
1. DUT1 update connect parameters latency and latency = 500
expected result: |
1. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["6-8"]
- ['']
- - latency=["500"]
- ['']
- - supervision_timeout=["1003"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07009
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout within allowed range and timeout<(1+latency)*2*MAX_interval*1.25 for BLUEDROID
steps: |
1. DUT1 update connect parameters timeout and timeout within allowed range and timeout<(1+latency)*2*MAX_interval*1.25
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["12"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07010
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 9 for BLUEDROID
steps: |
1. DUT1 update connect parameters timeout and timeout = 9
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["9"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07011
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout within allowed range for BLUEDROID
steps: |
1. DUT1 update timeout = 10
2. DUT1 update timeout = 3200
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC1"]
- ['']
- - interval=["8-10","8-10"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["10","3200"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07012
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 3201 for BLUEDROID
steps: |
1. DUT1 update timeout = 3201
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["3201"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07013
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect parameters before configure connect param event back for BLUEDROID
steps: |
1. DUT1 update valid interval
2. DUT1 update valid interval
expected result: |
1.
2. succeed
initial condition: BLE_CONN2
cmd set:
- ""
- - "SSC SSC1 bleconn -S -z ConnParam -a <dut2_bt_mac>"
- ['']
- - "SSC SSC1 bleconn -S -z ConnParam -a <dut2_bt_mac> -t 0x40"
- ['R SSC1 C pending']
- ID: BLUEDROID_GAP_07014
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect param and unpdate valid connect params by master for BLUEDROID
steps: |
1. DUT1 update invalid connect parameters
2. DUT2 update valid connect
expected result: |
1. fail
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC1"]
- ['']
- - interval=["32-64","32-64"]
- ['']
- - latency=["9","0"]
- ['']
- - supervision_timeout=["32","32"]
- ['']
- - expect_result=["ERROR","OK"]
- ['']
- ID: BLUEDROID_GAP_07015
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect parameters twice for BLUEDROID
allow fail: 1/2
steps: |
1. DUT1 update valid connect parameters
2. DUT1 update valid connect parameters
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC1"]
- ['']
- - interval=["7-80","10-100"]
- ['']
- - latency=["1","0"]
- ['']
- - supervision_timeout=["41","30"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07016
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect parameters(timeout<(1+latency)*2*MAX_interval*1.25) by slave for BLUEDROID
steps: |
1. DUT2 update valid connect parameters(timeout<(1+latency)*2*MAX_interval*1.25) by slave
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["7-90"]
- ['']
- - latency=["1"]
- ['']
- - supervision_timeout=["41"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07017
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connnect parameters interval within allowed range by slave for BLUEDROID
steps: |
1. DUT2 update interval 6-128
2. DUT2 update interval 21-3200
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC2"]
- ['']
- - interval=["6-128","21-3200"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["50","1000"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07018
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connnect parameters interval out of allowed range by slave for BLUEDROID
steps: |
1. DUT2 update invalid interval 10-3201
2. DUT2 update invalid interval 5-64
expected result: |
1. fail
2. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC2"]
- ['']
- - interval=["10-3201","5-64"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["32","32"]
- ['']
- - expect_result=["ERROR","ERROR"]
- ['']
- ID: BLUEDROID_GAP_07019
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connnect parameters and latency within allowed range and timeout<(1+latency)*2*MAX_interval*1.25 by slave for BLUEDROID
steps: |
1. DUT2 update connnect parameters and latency within allowed range and timeout<(1+latency)*2*MAX_interval*1.25 by slave
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["8"]
- ['']
- - supervision_timeout=["32"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07020
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters latency and latency out of allowed range by slave for BLUEDROID
steps: |
1. DUT2 update invalid latency = 501
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["6-8"]
- ['']
- - latency=["501"]
- ['']
- - supervision_timeout=["1003"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07021
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect parameters and latency = 500 by slave for BLUEDROID
steps: |
1. DUT2 update latency = 500
expected result: |
1. success
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["6-8"]
- ['']
- - latency=["500"]
- ['']
- - supervision_timeout=["1003"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07022
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 9 by slave for BLUEDROID
steps: |
1. DUT2 update connect parameters timeout and timeout = 9
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["9"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07023
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 10 by slave for BLUEDROID
steps: |
1. DUT2 update connect parameters timeout and timeout = 10 by slave
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["10"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07024
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 3200 by slave for BLUEDROID
steps: |
1. DUT2 update connect parameters timeout and timeout = 3200 by slave
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["3200"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_07025
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters timeout and timeout = 3201 by slave for BLUEDROID
steps: |
1. DUT2 update connect parameters timeout and timeout = 3201 by slave
expected result: |
1. fail
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2"]
- ['']
- - interval=["8-10"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["3201"]
- ['']
- - expect_result=["ERROR"]
- ['']
- ID: BLUEDROID_GAP_07026
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect parameters before configure connect param event back by slave for BLUEDROID
steps: |
1. DUT2 update valid interval
2. DUT2 update valid interval
expected result: |
1.
2. pending
initial condition: BLE_CONN2
cmd set:
- ""
- - "SSC SSC2 bleconn -S -z ConnParam -a <dut1_bt_mac>"
- ['']
- - "SSC SSC2 bleconn -S -z ConnParam -a <dut1_bt_mac> -t 0x40"
- ['R SSC2 C pending']
- ID: BLUEDROID_GAP_07027
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect param and update valid connect params by slave for BLUEDROID
steps: |
1. DUT2 update invalid connect
2. DUT2 update valid connect
expected result: |
1. fail
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC2"]
- ['']
- - interval=["32-64","32-64"]
- ['']
- - latency=["0","0"]
- ['']
- - supervision_timeout=["9","21"]
- ['']
- - expect_result=["ERROR","OK"]
- ['']
- ID: BLUEDROID_GAP_07028
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect parameters twice by slave for BLUEDROID
allow fail: 1/2
steps: |
1. DUT2 update valid interval
2. DUT2 update valid interval
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC2"]
- ['']
- - interval=["7-80","10-100"]
- ['']
- - latency=["1","0"]
- ['']
- - supervision_timeout=["41","30"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07029
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect param by master and update valid connect params by slave for BLUEDROID
steps: |
1. DUT1 update invalid connect
2. DUT2 update valid connect
expected result: |
1. fail
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC2"]
- ['']
- - interval=["32-64","32-64"]
- ['']
- - latency=["9","0"]
- ['']
- - supervision_timeout=["32","32"]
- ['']
- - expect_result=["ERROR","OK"]
- ['']
- ID: BLUEDROID_GAP_07030
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect param by master and update valid connect params by slave for BLUEDROID
steps: |
1. DUT1 update valid interval
2. DUT2 update valid interval
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1","SSC2"]
- ['']
- - interval=["7-80","10-100"]
- ['']
- - latency=["1","0"]
- ['']
- - supervision_timeout=["41","30"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07031
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update invalid connect param by slave and update valid connect params by master for BLUEDROID
steps: |
1. DUT1 update invalid connect
2. DUT2 update valid connect
expected result: |
1. fail
2. success
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC1"]
- ['']
- - interval=["32-64","32-64"]
- ['']
- - latency=["9","0"]
- ['']
- - supervision_timeout=["32","32"]
- ['']
- - expect_result=["ERROR","OK"]
- ['']
- ID: BLUEDROID_GAP_07032
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update valid connect param by slave and update valid connect params by master for BLUEDROID
allow fail: 1/2
steps: |
1. DUT2 update valid interval
2. DUT1 update valid interval
expected result: |
1. succeed
2. succeed
initial condition: BLE_CONN2
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC2","SSC1"]
- ['']
- - interval=["7-80","10-100"]
- ['']
- - latency=["1","0"]
- ['']
- - supervision_timeout=["41","30"]
- ['']
- - expect_result=["OK","OK"]
- ['']
- ID: BLUEDROID_GAP_07033
<<: *GAP_CASE
test point 2: BLE GAP update connect parameters
summary: update connect parameters by master after pairing for BLUEDROID
steps: |
1. DUT1 update connection parameters
expected result: |
1. succeed
initial condition: BLE_CONN_SMP
cmd set:
- "BLEFunction/ConnParamUpdate"
- - dut = ["SSC1"]
- ['']
- - interval=["32-64"]
- ['']
- - latency=["0"]
- ['']
- - supervision_timeout=["32"]
- ['']
- - expect_result=["OK"]
- ['']
- ID: BLUEDROID_GAP_09001
<<: *GAP_CASE
test point 2: BLE GAP processing scan data
summary: process scan data txp, manufacturer data, interval range, appearence, flag
steps: |
1. DUT1 set raw adv data tx power, manufacturer data, interval range, apperaence, flag
2. DUT1 start adv
3. DUT2 do active scan with extended scan data
expected result: |
1. succeed
2. succeed
3. scan with the correct adv data
cmd set:
- ""
- *dut1_stop_adv
- - "SSC SSC1 bleadv -R -t 1 -r 0x020AEB06FF1112131415051220004000021901020106"
- ["R SSC1 C +BLEADV:OK"]
- *dut1_start_adv
- *dut2_stop_adv
- - "SSC SSC2 blescan -D -z start -t 1 -e 1 -c 0 -d 1"
- - 'P SSC2 RE "\+BTSCANEXT:%%s,man,0x1112131415"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,txp,0xEB"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,intrange,0x20004000"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,app,0x01"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,flag,0x06"%%(<dut1_bt_mac>)'
- 'R SSC2 C Complete'
- ID: BLUEDROID_GAP_09004
<<: *GAP_CASE
test point 2: BLE GAP processing scan data
summary: process combined adv data and scan response data
steps: |
1. DUT1 set raw adv data manufacturer data
2. DUT1 set scan response data tx power, interval range, apperaence, flag
2. DUT1 start adv
3. DUT2 do active scan with extended scan data 19
expected result: |
1. succeed
2. succeed
3. scan with the correct adv data
cmd set:
- ""
- *dut1_stop_adv
- - "SSC SSC1 bleadv -R -t 1 -r 0x15FF1011121314151617181910111213141516171819"
- ["R SSC1 C +BLEADV:OK"]
- - "SSC SSC1 bleadv -R -t 2 -r 0x020AEB051220004000021901020106"
- ["R SSC1 C +BLEADV:OK"]
- *dut1_start_adv
- *dut2_stop_adv
- - "SSC SSC2 blescan -D -z start -t 1 -e 1 -d 1"
- - 'P SSC2 RE "\+BTSCANEXT:%%s,man,0x1011121314151617181910111213141516171819"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,txp,0xEB"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,intrange,0x20004000"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,app,0x01"%%(<dut1_bt_mac>)'
- 'P SSC2 RE "\+BTSCANEXT:%%s,flag,0x06"%%(<dut1_bt_mac>)'
- 'R SSC2 C Complete'
- ID: BLUEDROID_GAP_09007
<<: *GAP_CASE
test point 2: BLE GAP processing scan data
summary: proccess scan data included adv interval
steps: |
1. DUT1 stop advertise and set short device name
2. DUT1 set max interval 0x40 min interval 0x20 for adv data and scan response
3. DUT1 start advertising
4. DUT2 start scan and processing scan data
5. DUT1 stop advertising
6. DUT1 set max interval 0x400 min interval 0x200 for adv data and scan response
7. DUT1 start advertising
8. DUT2 start scan and processing scan data
expected result: |
1. succeed
2. succeed
3. succeed
4. scan with the correct adv data
5. succeed
6. succeed
7. succeed
8. scan with the correct adv data
cmd set:
- ""
- *dut1_stop_adv
- *set_default_ble_name
- - "SSC SSC1 bleadv -L -c 0 -i 0x20-0x40 -t 3"
- ["R SSC1 C +BLEADV:SetAdv,OK"]
- *dut1_start_adv
- - "SSC SSC2 blescan -D -z start -t 1 -e 1 -c 0 -d 1"
- - 'P SSC2 RE "\+BTSCANEXT:%%s,intrange,0x20004000"%%(<dut1_bt_mac>)'
- 'R SSC2 C Complete'
- *dut1_stop_adv
- - "SSC SSC1 bleadv -L -c 0 -i 0x200-0x400 -t 3"
- ["R SSC1 C +BLEADV:SetAdv,OK"]
- *dut1_start_adv
- - "SSC SSC2 blescan -D -z start -t 1 -e 1 -c 0 -d 1"
- - 'P SSC2 RE "\+BTSCANEXT:%%s,intrange,0x00020004"%%(<dut1_bt_mac>)'
- 'R SSC2 C Complete'
- ID: BLUEDROID_GAP_13001
<<: *GAP_CASE
test point 2: BLE GAP param packet data length test
summary: gattc set packet data length at valid length (27-251) for BLUEDROID
steps: |
1. DUT1 connect DUT2
2. DUT1 set packet data length
expected result: |
1. succeed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLECONN:GapConnect,OK', 'R SSC2 C +BLECONN:GapConnect']
- - LOOP 3 1 "[27,200,251]" "[27,200,251]"
- - "SSC SSC1 ble -S -z pktLen -a <dut2_bt_mac> -l {%d}"
- ["R SSC1 C +BLECONN:UpdatePktLen,OK,{%d}"]
- ID: BLUEDROID_GAP_13002
<<: *GAP_CASE
test point 2: BLE GAP param packet data length test
summary: gattc set packet data length at invalid length for BLUEDROID
steps: |
1. DUT1 connect DUT2
2. DUT1 set packet data length
expected result: |
1. succeed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLECONN:GapConnect,OK', 'R SSC2 C +BLECONN:GapConnect']
- - LOOP 2 1 "[26,252]" "[27,251]"
- - "SSC SSC1 ble -S -z pktLen -a <dut2_bt_mac> -l {%d}"
- ["R SSC1 C +BLECONN:UpdatePktLen,OK,{%d}"]
- ID: BLUEDROID_GAP_13003
<<: *GAP_CASE
test point 2: BLE GAP param packet data length test
summary: gatts set packet data length at valid length (27-251) for BLUEDROID
steps: |
1. DUT1 connect DUT2
2. DUT1 set packet data length
expected result: |
1. succeed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLECONN:GapConnect,OK', 'R SSC2 C +BLECONN:GapConnect']
- - LOOP 3 1 "[27,200,251]" "[27,200,251]"
- - "SSC SSC2 ble -S -z pktLen -a <dut1_bt_mac> -l {%d}"
- ["R SSC2 C +BLECONN:UpdatePktLen,OK,{%d}"]
- ID: BLUEDROID_GAP_13004
<<: *GAP_CASE
test point 2: BLE GAP param packet data length test
summary: gatts set packet data length at invalid length for BLUEDROID
steps: |
1. DUT1 connect DUT2
2. DUT1 set packet data length
expected result: |
1. succeed
2. succeed
cmd set:
- ""
- - "SSC SSC1 bleconn -C -p 0x10 -a <dut2_bt_mac>"
- ['R SSC1 C +BLECONN:GapConnect,OK', 'R SSC2 C +BLECONN:GapConnect']
- - LOOP 2 1 "[26,252]" "[27,251]"
- - "SSC SSC2 ble -S -z pktLen -a <dut1_bt_mac> -l {%d}"
- ["R SSC2 C +BLECONN:UpdatePktLen,OK,{%d}"]
- ID: BLUEDROID_GAP_40001
<<: *GAP_CASE
auto test: 'No'
test point 2: test if BLE work after switch off some sub modules
summary: GAP only test for BLUEDROID
steps: |
1. download GAP only SSC bin on both DUT
2. DUT1 set ascii device name
3. stop advertising
4. config scan response and start advertising
5. DUT2 do active scan
expected result: |
1. succeed
2. succeed
3. succeed
4. succeed
5. device name in scan result
initial condition: None
version: v1 (2017-05-19)
cmd set:
- ""
- - "SSC SSC[1-2] reboot"
- ['R SSC[1-2] C !!!ready!!!']
- - "SSC SSC[1-2] ble -R"
- ["R SSC[1-2] C +BLE:OK"]
- *set_default_ble_name
- *set_default_adv_data
- *dut2_stop_adv
- - "SSC SSC2 blescan -D -z start -t 3 -c 0"
- ["R SSC2 P <dut1_ble_name>"]