esp-idf/examples/system/.build-test-rules.yml
2023-06-26 21:05:16 +08:00

231 lines
6.1 KiB
YAML

# Documentation: .gitlab/ci/README.md#manifest-file-to-control-the-buildtest-apps
examples/system/app_trace_basic:
disable:
- if: IDF_TARGET == "esp32c6" or IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32c6, esp32h2 is not supported yet
examples/system/console/advanced:
disable_test:
- if: IDF_TARGET not in ["esp32", "esp32c3"]
reason: Sufficient to run this app on one chip with each architecture
examples/system/console/advanced_usb_cdc:
disable:
- if: SOC_USB_PERIPH_NUM == 0
examples/system/console/basic:
disable_test:
- if: IDF_TARGET not in ["esp32", "esp32c3"]
reason: Sufficient to run this app on one chip with each architecture
examples/system/deep_sleep:
disable:
- if: IDF_TARGET in ["esp32h2"]
temporary: true
reason: target(s) not supported yet # IDF-6268
examples/system/deep_sleep_wake_stub:
disable:
- if: IDF_TARGET in ["esp32c2", "esp32h2"]
temporary: true
reason: target(s) is not supported yet
examples/system/esp_timer:
disable:
- if: IDF_TARGET == "esp32c6" or IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32c6 is not supported yet
examples/system/eventfd:
disable:
- if: SOC_GPTIMER_SUPPORTED != 1
examples/system/flash_suspend:
enable:
- if: IDF_TARGET == "esp32c3"
temporary: true
reason: the other targets are not tested yet
examples/system/gcov:
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
examples/system/heap_task_tracking:
disable:
- if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32c2, esp32h2 is not supported yet
examples/system/himem:
enable:
- if: IDF_TARGET == "esp32"
temporary: true
reason: the other targets are not tested yet
examples/system/ipc/ipc_isr:
enable:
- if: IDF_TARGET == "esp32" or IDF_TARGET == "esp32s3"
temporary: true
reason: the other targets are not tested yet
examples/system/ota/advanced_https_ota:
disable:
- if: IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32h2 is not supported yet
disable_test:
- if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32c6"
temporary: true
reason: lack of runners
examples/system/ota/native_ota_example:
disable:
- if: IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32h2 is not supported yet
disable_test:
- if: IDF_TARGET == "esp32c6"
temporary: true
reason: lack of runners
examples/system/ota/otatool:
disable:
- if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32c2, esp32h2 is not supported yet
examples/system/ota/pre_encrypted_ota:
disable:
- if: IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32h2 is not supported yet
disable_test:
- if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32c6"
temporary: true
reason: lack of runners
examples/system/ota/simple_ota_example:
disable:
- if: IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32h2 is not supported yet
disable_test:
- if: IDF_TARGET == "esp32c2" or IDF_TARGET == "esp32c6"
temporary: true
reason: lack of runners
examples/system/perfmon:
enable:
- if: IDF_TARGET in ["esp32", "esp32s2", "esp32s3"]
temporary: true
reason: the other targets are not tested yet
examples/system/select:
disable:
- if: IDF_TARGET == "esp32c2"
temporary: true
reason: target esp32c2 is not supported yet
disable_test:
- if: IDF_TARGET in ["esp32s2", "esp32s3"]
temporary: true
reason: lack of runners
- if: IDF_TARGET == "esp32c6" or IDF_TARGET == "esp32h2"
temporary: true
reason: target esp32c6 is not supported yet
examples/system/sysview_tracing:
disable:
- if: SOC_GPTIMER_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
examples/system/sysview_tracing_heap_log:
disable:
- if: SOC_GPTIMER_SUPPORTED != 1
disable_test:
- if: IDF_TARGET != "esp32"
temporary: true
reason: lack of runners
examples/system/task_watchdog:
disable_test:
- if: IDF_TARGET == "esp32c2"
temporary: true
reason: target esp32c2 is not supported yet
examples/system/ulp/lp_core/gpio:
enable:
- if: SOC_LP_CORE_SUPPORTED == 1
examples/system/ulp/lp_core/lp_i2c:
enable:
- if: SOC_LP_I2C_SUPPORTED == 1
examples/system/ulp/lp_core/lp_uart/lp_uart_echo:
enable:
- if: SOC_UART_LP_NUM > 0
examples/system/ulp/lp_core/lp_uart/lp_uart_print:
enable:
- if: SOC_UART_LP_NUM > 0
examples/system/ulp/ulp_fsm/ulp:
disable:
- if: SOC_ULP_FSM_SUPPORTED != 1
examples/system/ulp/ulp_fsm/ulp_adc:
enable:
- if: IDF_TARGET in ["esp32", "esp32s3"]
temporary: true
reason: the other targets are not tested yet
examples/system/ulp/ulp_riscv/adc:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
temporary: true
reason: the other targets are not tested yet
examples/system/ulp/ulp_riscv/ds18b20_onewire:
enable:
- if: IDF_TARGET == "esp32s2"
temporary: true
reason: the other targets are not tested yet
examples/system/ulp/ulp_riscv/gpio:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
temporary: true
reason: the other targets are not tested yet
examples/system/ulp/ulp_riscv/gpio_interrupt:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
temporary: true
reason: the other targets are not tested yet
examples/system/ulp/ulp_riscv/i2c:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
examples/system/ulp/ulp_riscv/touch:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
examples/system/ulp/ulp_riscv/uart_print:
enable:
- if: SOC_RISCV_COPROC_SUPPORTED == 1
examples/system/xip_from_psram:
enable:
- if: SOC_SPIRAM_SUPPORTED == 1
reason: this feature is supported on chips that have PSRAM
disable:
- if: IDF_TARGET == "esp32"
reason: target esp32 doesn't support this feature.