mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
176 lines
7.4 KiB
C
176 lines
7.4 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#include "esp_rom_sys.h"
|
|
#include "esp_attr.h"
|
|
#include "soc/i2c_ana_mst_reg.h"
|
|
#include "hal/regi2c_ctrl_ll.h"
|
|
|
|
#define REGI2C_BIAS_MST_SEL (BIT(8))
|
|
#define REGI2C_BBPLL_MST_SEL (BIT(9))
|
|
#define REGI2C_ULP_CAL_MST_SEL (BIT(10))
|
|
#define REGI2C_SAR_I2C_MST_SEL (BIT(11))
|
|
#define REGI2C_DIG_REG_MST_SEL (BIT(12))
|
|
|
|
#define REGI2C_BIAS_RD_MASK (~BIT(6) & I2C_ANA_MST_ANA_CONF1_M)
|
|
#define REGI2C_BBPLL_RD_MASK (~BIT(7) & I2C_ANA_MST_ANA_CONF1_M)
|
|
#define REGI2C_ULP_CAL_RD_MASK (~BIT(8) & I2C_ANA_MST_ANA_CONF1_M)
|
|
#define REGI2C_SAR_I2C_RD_MASK (~BIT(9) & I2C_ANA_MST_ANA_CONF1_M)
|
|
#define REGI2C_DIG_REG_RD_MASK (~BIT(10) & I2C_ANA_MST_ANA_CONF1_M)
|
|
|
|
#define I2C_ANA_MST_I2C_CTRL_REG(n) (I2C_ANA_MST_I2C0_CTRL_REG + n*4) // 0: I2C_ANA_MST_I2C0_CTRL_REG; 1: I2C_ANA_MST_I2C1_CTRL_REG
|
|
|
|
#define REGI2C_RTC_BUSY (BIT(25))
|
|
#define REGI2C_RTC_BUSY_M (BIT(25))
|
|
#define REGI2C_RTC_BUSY_V 0x1
|
|
#define REGI2C_RTC_BUSY_S 25
|
|
|
|
#define REGI2C_RTC_WR_CNTL (BIT(24))
|
|
#define REGI2C_RTC_WR_CNTL_M (BIT(24))
|
|
#define REGI2C_RTC_WR_CNTL_V 0x1
|
|
#define REGI2C_RTC_WR_CNTL_S 24
|
|
|
|
#define REGI2C_RTC_DATA 0x000000FF
|
|
#define REGI2C_RTC_DATA_M ((I2C_RTC_DATA_V)<<(I2C_RTC_DATA_S))
|
|
#define REGI2C_RTC_DATA_V 0xFF
|
|
#define REGI2C_RTC_DATA_S 16
|
|
|
|
#define REGI2C_RTC_ADDR 0x000000FF
|
|
#define REGI2C_RTC_ADDR_M ((I2C_RTC_ADDR_V)<<(I2C_RTC_ADDR_S))
|
|
#define REGI2C_RTC_ADDR_V 0xFF
|
|
#define REGI2C_RTC_ADDR_S 8
|
|
|
|
#define REGI2C_RTC_SLAVE_ID 0x000000FF
|
|
#define REGI2C_RTC_SLAVE_ID_M ((I2C_RTC_SLAVE_ID_V)<<(I2C_RTC_SLAVE_ID_S))
|
|
#define REGI2C_RTC_SLAVE_ID_V 0xFF
|
|
#define REGI2C_RTC_SLAVE_ID_S 0
|
|
|
|
/* SLAVE */
|
|
|
|
#define REGI2C_BBPLL (0x66)
|
|
#define REGI2C_BBPLL_HOSTID 0
|
|
|
|
#define REGI2C_BIAS (0x6a)
|
|
#define REGI2C_BIAS_HOSTID 0
|
|
|
|
#define REGI2C_DIG_REG (0x6d)
|
|
#define REGI2C_DIG_REG_HOSTID 0
|
|
|
|
#define REGI2C_ULP_CAL (0x61)
|
|
#define REGI2C_ULP_CAL_HOSTID 0
|
|
|
|
#define REGI2C_SAR_I2C (0x69)
|
|
#define REGI2C_SAR_I2C_HOSTID 0
|
|
|
|
/* SLAVE END */
|
|
|
|
uint8_t esp_rom_regi2c_read(uint8_t block, uint8_t host_id, uint8_t reg_add) __attribute__((alias("regi2c_read_impl")));
|
|
uint8_t esp_rom_regi2c_read_mask(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t msb, uint8_t lsb) __attribute__((alias("regi2c_read_mask_impl")));
|
|
void esp_rom_regi2c_write(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t data) __attribute__((alias("regi2c_write_impl")));
|
|
void esp_rom_regi2c_write_mask(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t msb, uint8_t lsb, uint8_t data) __attribute__((alias("regi2c_write_mask_impl")));
|
|
|
|
static IRAM_ATTR uint8_t regi2c_enable_block(uint8_t block)
|
|
{
|
|
uint32_t i2c_sel = 0;
|
|
|
|
regi2c_ctrl_ll_master_enable_clock(true);
|
|
|
|
/* Before config I2C register, enable corresponding slave. */
|
|
switch (block) {
|
|
case REGI2C_BBPLL :
|
|
i2c_sel = REG_GET_BIT(I2C_ANA_MST_ANA_CONF2_REG, REGI2C_BBPLL_MST_SEL);
|
|
REG_WRITE(I2C_ANA_MST_ANA_CONF1_REG, REGI2C_BBPLL_RD_MASK);
|
|
break;
|
|
case REGI2C_BIAS :
|
|
i2c_sel = REG_GET_BIT(I2C_ANA_MST_ANA_CONF2_REG, REGI2C_BIAS_MST_SEL);
|
|
REG_WRITE(I2C_ANA_MST_ANA_CONF1_REG, REGI2C_BIAS_RD_MASK);
|
|
break;
|
|
case REGI2C_DIG_REG:
|
|
i2c_sel = REG_GET_BIT(I2C_ANA_MST_ANA_CONF2_REG, REGI2C_DIG_REG_MST_SEL);
|
|
REG_WRITE(I2C_ANA_MST_ANA_CONF1_REG, REGI2C_DIG_REG_RD_MASK);
|
|
break;
|
|
case REGI2C_ULP_CAL:
|
|
i2c_sel = REG_GET_BIT(I2C_ANA_MST_ANA_CONF2_REG, REGI2C_ULP_CAL_MST_SEL);
|
|
REG_WRITE(I2C_ANA_MST_ANA_CONF1_REG, REGI2C_ULP_CAL_RD_MASK);
|
|
break;
|
|
case REGI2C_SAR_I2C:
|
|
i2c_sel = REG_GET_BIT(I2C_ANA_MST_ANA_CONF2_REG, REGI2C_SAR_I2C_MST_SEL);
|
|
REG_WRITE(I2C_ANA_MST_ANA_CONF1_REG, REGI2C_SAR_I2C_RD_MASK);
|
|
break;
|
|
}
|
|
|
|
return (uint8_t)(i2c_sel ? 0: 1);
|
|
}
|
|
|
|
uint8_t IRAM_ATTR regi2c_read_impl(uint8_t block, uint8_t host_id, uint8_t reg_add)
|
|
{
|
|
(void)host_id;
|
|
uint8_t i2c_sel = regi2c_enable_block(block);
|
|
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY)); // wait i2c idle
|
|
uint32_t temp = ((block & REGI2C_RTC_SLAVE_ID_V) << REGI2C_RTC_SLAVE_ID_S)
|
|
| (reg_add & REGI2C_RTC_ADDR_V) << REGI2C_RTC_ADDR_S;
|
|
REG_WRITE(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), temp);
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
uint8_t ret = REG_GET_FIELD(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_DATA);
|
|
|
|
return ret;
|
|
}
|
|
|
|
uint8_t IRAM_ATTR regi2c_read_mask_impl(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t msb, uint8_t lsb)
|
|
{
|
|
assert(msb - lsb < 8);
|
|
uint8_t i2c_sel = regi2c_enable_block(block);
|
|
|
|
(void)host_id;
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY)); // wait i2c idle
|
|
uint32_t temp = ((block & REGI2C_RTC_SLAVE_ID_V) << REGI2C_RTC_SLAVE_ID_S)
|
|
| (reg_add & REGI2C_RTC_ADDR_V) << REGI2C_RTC_ADDR_S;
|
|
REG_WRITE(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), temp);
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
uint32_t data = REG_GET_FIELD(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_DATA);
|
|
uint8_t ret = (uint8_t)((data >> lsb) & (~(0xFFFFFFFF << (msb - lsb + 1))));
|
|
|
|
return ret;
|
|
}
|
|
|
|
void IRAM_ATTR regi2c_write_impl(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t data)
|
|
{
|
|
(void)host_id;
|
|
uint8_t i2c_sel = regi2c_enable_block(block);
|
|
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY)); // wait i2c idle
|
|
uint32_t temp = ((block & REGI2C_RTC_SLAVE_ID_V) << REGI2C_RTC_SLAVE_ID_S)
|
|
| ((reg_add & REGI2C_RTC_ADDR_V) << REGI2C_RTC_ADDR_S)
|
|
| ((0x1 & REGI2C_RTC_WR_CNTL_V) << REGI2C_RTC_WR_CNTL_S) // 0: READ I2C register; 1: Write I2C register;
|
|
| (((uint32_t)data & REGI2C_RTC_DATA_V) << REGI2C_RTC_DATA_S);
|
|
REG_WRITE(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), temp);
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
}
|
|
|
|
void IRAM_ATTR regi2c_write_mask_impl(uint8_t block, uint8_t host_id, uint8_t reg_add, uint8_t msb, uint8_t lsb, uint8_t data)
|
|
{
|
|
(void)host_id;
|
|
assert(msb - lsb < 8);
|
|
uint8_t i2c_sel = regi2c_enable_block(block);
|
|
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
/*Read the i2c bus register*/
|
|
uint32_t temp = ((block & REGI2C_RTC_SLAVE_ID_V) << REGI2C_RTC_SLAVE_ID_S)
|
|
| (reg_add & REGI2C_RTC_ADDR_V) << REGI2C_RTC_ADDR_S;
|
|
REG_WRITE(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), temp);
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
temp = REG_GET_FIELD(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_DATA);
|
|
/*Write the i2c bus register*/
|
|
temp &= ((~(0xFFFFFFFF << lsb)) | (0xFFFFFFFF << (msb + 1)));
|
|
temp = (((uint32_t)data & (~(0xFFFFFFFF << (msb - lsb + 1)))) << lsb) | temp;
|
|
temp = ((block & REGI2C_RTC_SLAVE_ID_V) << REGI2C_RTC_SLAVE_ID_S)
|
|
| ((reg_add & REGI2C_RTC_ADDR_V) << REGI2C_RTC_ADDR_S)
|
|
| ((0x1 & REGI2C_RTC_WR_CNTL_V) << REGI2C_RTC_WR_CNTL_S)
|
|
| ((temp & REGI2C_RTC_DATA_V) << REGI2C_RTC_DATA_S);
|
|
REG_WRITE(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), temp);
|
|
while (REG_GET_BIT(I2C_ANA_MST_I2C_CTRL_REG(i2c_sel), REGI2C_RTC_BUSY));
|
|
}
|