/*
 * SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#pragma once

#include <stdbool.h>
#include <stdint.h>
#include "esp_err.h"
#include "driver/rmt_common.h"

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @brief Group of RMT RX callbacks
 * @note The callbacks are all running under ISR environment
 * @note When CONFIG_RMT_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
 *       The variables used in the function should be in the SRAM as well.
 */
typedef struct {
    rmt_rx_done_callback_t on_recv_done; /*!< Event callback, invoked when the RMT channel reception is finished
                                              or partial data is received */
} rmt_rx_event_callbacks_t;

/**
 * @brief RMT RX channel specific configuration
 */
typedef struct {
    gpio_num_t gpio_num;        /*!< GPIO number used by RMT RX channel. Set to -1 if unused */
    rmt_clock_source_t clk_src; /*!< Clock source of RMT RX channel, channels in the same group must use the same clock source */
    uint32_t resolution_hz;     /*!< Channel clock resolution, in Hz */
    size_t mem_block_symbols;   /*!< Size of memory block, in number of `rmt_symbol_word_t`, must be an even.
                                     In the DMA mode, this field controls the DMA buffer size, it can be set to a large value (e.g. 1024);
                                     In the normal mode, this field controls the number of RMT memory block that will be used by the channel. */
    int intr_priority;          /*!< RMT interrupt priority,
                                     if set to 0, the driver will try to allocate an interrupt with a relative low priority (1,2,3) */
    struct {
        uint32_t invert_in: 1;    /*!< Whether to invert the incoming RMT channel signal */
        uint32_t with_dma: 1;     /*!< If set, the driver will allocate an RMT channel with DMA capability */
        uint32_t io_loop_back: 1; /*!< For debug/test, the signal output from the GPIO will be fed to the input path as well */
    } flags;                      /*!< RX channel config flags */
} rmt_rx_channel_config_t;

/**
 * @brief RMT receive specific configuration
 */
typedef struct {
    uint32_t signal_range_min_ns; /*!< A pulse whose width is smaller than this threshold will be treated as glitch and ignored */
    uint32_t signal_range_max_ns; /*!< RMT will stop receiving if one symbol level has kept more than `signal_range_max_ns` */

    /// Receive specific flags
    struct extra_flags {
        uint32_t en_partial_rx: 1; /*!< Set this flag if the incoming data is very long, and the driver can only receive the data piece by piece,
                                        because the user buffer is not sufficient to save all the data. */
    } flags;                       /*!< Receive specific config flags */
} rmt_receive_config_t;

/**
 * @brief Create a RMT RX channel
 *
 * @param[in] config RX channel configurations
 * @param[out] ret_chan Returned generic RMT channel handle
 * @return
 *      - ESP_OK: Create RMT RX channel successfully
 *      - ESP_ERR_INVALID_ARG: Create RMT RX channel failed because of invalid argument
 *      - ESP_ERR_NO_MEM: Create RMT RX channel failed because out of memory
 *      - ESP_ERR_NOT_FOUND: Create RMT RX channel failed because all RMT channels are used up and no more free one
 *      - ESP_ERR_NOT_SUPPORTED: Create RMT RX channel failed because some feature is not supported by hardware, e.g. DMA feature is not supported by hardware
 *      - ESP_FAIL: Create RMT RX channel failed because of other error
 */
esp_err_t rmt_new_rx_channel(const rmt_rx_channel_config_t *config, rmt_channel_handle_t *ret_chan);

/**
 * @brief Initiate a receive job for RMT RX channel
 *
 * @note This function is non-blocking, it initiates a new receive job and then returns.
 *       User should check the received data from the `on_recv_done` callback that registered by `rmt_rx_register_event_callbacks()`.
 * @note This function can also be called in ISR context.
 * @note If you want this function to work even when the flash cache is disabled, please enable the `CONFIG_RMT_RECV_FUNC_IN_IRAM` option.
 *
 * @param[in] rx_channel RMT RX channel that created by `rmt_new_rx_channel()`
 * @param[in] buffer The buffer to store the received RMT symbols
 * @param[in] buffer_size size of the `buffer`, in bytes
 * @param[in] config Receive specific configurations
 * @return
 *      - ESP_OK: Initiate receive job successfully
 *      - ESP_ERR_INVALID_ARG: Initiate receive job failed because of invalid argument
 *      - ESP_ERR_INVALID_STATE: Initiate receive job failed because channel is not enabled
 *      - ESP_FAIL: Initiate receive job failed because of other error
 */
esp_err_t rmt_receive(rmt_channel_handle_t rx_channel, void *buffer, size_t buffer_size, const rmt_receive_config_t *config);

/**
 * @brief Set callbacks for RMT RX channel
 *
 * @note User can deregister a previously registered callback by calling this function and setting the callback member in the `cbs` structure to NULL.
 * @note When CONFIG_RMT_ISR_IRAM_SAFE is enabled, the callback itself and functions called by it should be placed in IRAM.
 *       The variables used in the function should be in the SRAM as well. The `user_data` should also reside in SRAM.
 *
 * @param[in] rx_channel RMT generic channel that created by `rmt_new_rx_channel()`
 * @param[in] cbs Group of callback functions
 * @param[in] user_data User data, which will be passed to callback functions directly
 * @return
 *      - ESP_OK: Set event callbacks successfully
 *      - ESP_ERR_INVALID_ARG: Set event callbacks failed because of invalid argument
 *      - ESP_FAIL: Set event callbacks failed because of other error
 */
esp_err_t rmt_rx_register_event_callbacks(rmt_channel_handle_t rx_channel, const rmt_rx_event_callbacks_t *cbs, void *user_data);

#ifdef __cplusplus
}
#endif