.. _esp32s2-modules: Modules ======= This is a family of ESP32-S2-based modules with some integrated key components, including a crystal oscillator and an antenna matching circuit. The modules constitute ready-made solutions for integration into final products. If combined with a few extra components, such as a programming interface, bootstrapping resistors, and pin headers, these modules can also be used for evaluation of ESP32-S2's functionality. The key characteristics of these modules are summarized in the table below. Some additional details are covered in the following sections. =================== ============ =========== ========= ==== =============== Module Chip Flash, MB PSRAM, MB Ant. Dimensions, mm =================== ============ =========== ========= ==== =============== ESP32-S2-WROOM-32 ESP32-S2 2 N/A MIFA 16 x 23 x 3 =================== ============ =========== ========= ==== =============== * MIFA - Meandered Inverted-F Antenna * U.FL - U.FL / IPEX antenna connector Development Boards ================== .. _esp-modules-and-boards-esp32s2-kaluga-1-kit: ESP32-S2-Kaluga-1 Kit v1.3 -------------------------- The ESP32-S2-Kaluga-1 kit is a development kit by Espressif that consists of one main board and several extension boards. This kit is intended to provide users with tools for development of human-computer interaction applications based on the ESP32-S2 chip. .. figure:: https://dl.espressif.com/dl/schematics/pictures/esp32-s2-kaluga-1-v1.2-3d.png :align: center :width: 2631px :height: 1966px :scale: 25% :alt: ESP32-S2-Kaluga-1 :figclass: align-center ESP32-S2-Kaluga-1 (click to enlarge) Documentation ^^^^^^^^^^^^^ * :doc:`esp32s2/user-guide-esp32-s2-kaluga-1-kit` Previous Versions ^^^^^^^^^^^^^^^^^ * :ref:`esp32s2-modules-and-boards-previous-esp32s2-kaluga-1-kit-v1.2` .. _FTDI Virtual COM Port Drivers: https://www.ftdichip.com/Drivers/VCP.htm .. _Espressif Products Ordering Information: https://www.espressif.com/sites/default/files/documentation/espressif_products_ordering_information_en.pdf