/*
   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/


/****************************************************************************
* This is a demo for bluetooth config wifi connection to ap. You can config ESP32 to connect a softap
* or config ESP32 as a softap to be connected by other device. APP can be downloaded from github
* android source code: https://github.com/EspressifApp/EspBlufi
* iOS source code: https://github.com/EspressifApp/EspBlufiForiOS
****************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "esp_system.h"
#include "esp_mac.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "esp_bt.h"

#include "esp_blufi_api.h"
#include "blufi_example.h"

#include "esp_blufi.h"

static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t *param);

#define WIFI_LIST_NUM   10

static wifi_config_t sta_config;
static wifi_config_t ap_config;

/* FreeRTOS event group to signal when we are connected & ready to make a request */
static EventGroupHandle_t wifi_event_group;

/* The event group allows multiple bits for each event,
   but we only care about one event - are we connected
   to the AP with an IP? */
const int CONNECTED_BIT = BIT0;

/* store the station info for send back to phone */
static bool gl_sta_connected = false;
static bool ble_is_connected = false;
static uint8_t gl_sta_bssid[6];
static uint8_t gl_sta_ssid[32];
static int gl_sta_ssid_len;
static wifi_sta_list_t gl_sta_list;

static int softap_get_current_connection_number(void)
{
    esp_err_t ret;
    ret = esp_wifi_ap_get_sta_list(&gl_sta_list);
    if (ret == ESP_OK)
    {
        return gl_sta_list.num;
    }

    return 0;
}

static void ip_event_handler(void* arg, esp_event_base_t event_base,
                                int32_t event_id, void* event_data)
{
    wifi_mode_t mode;

    switch (event_id) {
    case IP_EVENT_STA_GOT_IP: {
        esp_blufi_extra_info_t info;

        xEventGroupSetBits(wifi_event_group, CONNECTED_BIT);
        esp_wifi_get_mode(&mode);

        memset(&info, 0, sizeof(esp_blufi_extra_info_t));
        memcpy(info.sta_bssid, gl_sta_bssid, 6);
        info.sta_bssid_set = true;
        info.sta_ssid = gl_sta_ssid;
        info.sta_ssid_len = gl_sta_ssid_len;
        if (ble_is_connected == true) {
            esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, softap_get_current_connection_number(), &info);
        } else {
            BLUFI_INFO("BLUFI BLE is not connected yet\n");
        }
        break;
    }
    default:
        break;
    }
    return;
}

static void wifi_event_handler(void* arg, esp_event_base_t event_base,
                                int32_t event_id, void* event_data)
{
    wifi_event_sta_connected_t *event;
    wifi_mode_t mode;

    switch (event_id) {
    case WIFI_EVENT_STA_START:
        esp_wifi_connect();
        break;
    case WIFI_EVENT_STA_CONNECTED:
        gl_sta_connected = true;
        event = (wifi_event_sta_connected_t*) event_data;
        memcpy(gl_sta_bssid, event->bssid, 6);
        memcpy(gl_sta_ssid, event->ssid, event->ssid_len);
        gl_sta_ssid_len = event->ssid_len;
        break;
    case WIFI_EVENT_STA_DISCONNECTED:
        /* This is a workaround as ESP32 WiFi libs don't currently
           auto-reassociate. */
        gl_sta_connected = false;
        memset(gl_sta_ssid, 0, 32);
        memset(gl_sta_bssid, 0, 6);
        gl_sta_ssid_len = 0;
        esp_wifi_connect();
        xEventGroupClearBits(wifi_event_group, CONNECTED_BIT);
        break;
    case WIFI_EVENT_AP_START:
        esp_wifi_get_mode(&mode);

        /* TODO: get config or information of softap, then set to report extra_info */
        if (ble_is_connected == true) {
            if (gl_sta_connected) {
                esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, softap_get_current_connection_number(), NULL);
            } else {
                esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_FAIL, softap_get_current_connection_number(), NULL);
            }
        } else {
            BLUFI_INFO("BLUFI BLE is not connected yet\n");
        }
        break;
    case WIFI_EVENT_SCAN_DONE: {
        uint16_t apCount = 0;
        esp_wifi_scan_get_ap_num(&apCount);
        if (apCount == 0) {
            BLUFI_INFO("Nothing AP found");
            break;
        }
        wifi_ap_record_t *ap_list = (wifi_ap_record_t *)malloc(sizeof(wifi_ap_record_t) * apCount);
        if (!ap_list) {
            BLUFI_ERROR("malloc error, ap_list is NULL");
            break;
        }
        ESP_ERROR_CHECK(esp_wifi_scan_get_ap_records(&apCount, ap_list));
        esp_blufi_ap_record_t * blufi_ap_list = (esp_blufi_ap_record_t *)malloc(apCount * sizeof(esp_blufi_ap_record_t));
        if (!blufi_ap_list) {
            if (ap_list) {
                free(ap_list);
            }
            BLUFI_ERROR("malloc error, blufi_ap_list is NULL");
            break;
        }
        for (int i = 0; i < apCount; ++i)
        {
            blufi_ap_list[i].rssi = ap_list[i].rssi;
            memcpy(blufi_ap_list[i].ssid, ap_list[i].ssid, sizeof(ap_list[i].ssid));
        }

        if (ble_is_connected == true) {
            esp_blufi_send_wifi_list(apCount, blufi_ap_list);
        } else {
            BLUFI_INFO("BLUFI BLE is not connected yet\n");
        }

        esp_wifi_scan_stop();
        free(ap_list);
        free(blufi_ap_list);
        break;
    }
    case WIFI_EVENT_AP_STACONNECTED: {
        wifi_event_ap_staconnected_t* event = (wifi_event_ap_staconnected_t*) event_data;
        BLUFI_INFO("station "MACSTR" join, AID=%d", MAC2STR(event->mac), event->aid);
        break;
    }
    case WIFI_EVENT_AP_STADISCONNECTED: {
        wifi_event_ap_stadisconnected_t* event = (wifi_event_ap_stadisconnected_t*) event_data;
        BLUFI_INFO("station "MACSTR" leave, AID=%d", MAC2STR(event->mac), event->aid);
        break;
    }

    default:
        break;
    }
    return;
}

static void initialise_wifi(void)
{
    ESP_ERROR_CHECK(esp_netif_init());
    wifi_event_group = xEventGroupCreate();
    ESP_ERROR_CHECK(esp_event_loop_create_default());
    esp_netif_t *sta_netif = esp_netif_create_default_wifi_sta();
    assert(sta_netif);
    esp_netif_t *ap_netif = esp_netif_create_default_wifi_ap();
    assert(ap_netif);
    ESP_ERROR_CHECK(esp_event_handler_register(WIFI_EVENT, ESP_EVENT_ANY_ID, &wifi_event_handler, NULL));
    ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_STA_GOT_IP, &ip_event_handler, NULL));

    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
    ESP_ERROR_CHECK( esp_wifi_init(&cfg) );
    ESP_ERROR_CHECK( esp_wifi_set_mode(WIFI_MODE_STA) );
    ESP_ERROR_CHECK( esp_wifi_start() );
}

static esp_blufi_callbacks_t example_callbacks = {
    .event_cb = example_event_callback,
    .negotiate_data_handler = blufi_dh_negotiate_data_handler,
    .encrypt_func = blufi_aes_encrypt,
    .decrypt_func = blufi_aes_decrypt,
    .checksum_func = blufi_crc_checksum,
};

static void example_event_callback(esp_blufi_cb_event_t event, esp_blufi_cb_param_t *param)
{
    /* actually, should post to blufi_task handle the procedure,
     * now, as a example, we do it more simply */
    switch (event) {
    case ESP_BLUFI_EVENT_INIT_FINISH:
        BLUFI_INFO("BLUFI init finish\n");

        esp_blufi_adv_start();
        break;
    case ESP_BLUFI_EVENT_DEINIT_FINISH:
        BLUFI_INFO("BLUFI deinit finish\n");
        break;
    case ESP_BLUFI_EVENT_BLE_CONNECT:
        BLUFI_INFO("BLUFI ble connect\n");
        ble_is_connected = true;
        esp_blufi_adv_stop();
        blufi_security_init();
        break;
    case ESP_BLUFI_EVENT_BLE_DISCONNECT:
        BLUFI_INFO("BLUFI ble disconnect\n");
        ble_is_connected = false;
        blufi_security_deinit();
        esp_blufi_adv_start();
        break;
    case ESP_BLUFI_EVENT_SET_WIFI_OPMODE:
        BLUFI_INFO("BLUFI Set WIFI opmode %d\n", param->wifi_mode.op_mode);
        ESP_ERROR_CHECK( esp_wifi_set_mode(param->wifi_mode.op_mode) );
        break;
    case ESP_BLUFI_EVENT_REQ_CONNECT_TO_AP:
        BLUFI_INFO("BLUFI requset wifi connect to AP\n");
        /* there is no wifi callback when the device has already connected to this wifi
        so disconnect wifi before connection.
        */
        esp_wifi_disconnect();
        esp_wifi_connect();
        break;
    case ESP_BLUFI_EVENT_REQ_DISCONNECT_FROM_AP:
        BLUFI_INFO("BLUFI requset wifi disconnect from AP\n");
        esp_wifi_disconnect();
        break;
    case ESP_BLUFI_EVENT_REPORT_ERROR:
        BLUFI_ERROR("BLUFI report error, error code %d\n", param->report_error.state);
        esp_blufi_send_error_info(param->report_error.state);
        break;
    case ESP_BLUFI_EVENT_GET_WIFI_STATUS: {
        wifi_mode_t mode;
        esp_blufi_extra_info_t info;

        esp_wifi_get_mode(&mode);



        if (gl_sta_connected) {
            memset(&info, 0, sizeof(esp_blufi_extra_info_t));
            memcpy(info.sta_bssid, gl_sta_bssid, 6);
            info.sta_bssid_set = true;
            info.sta_ssid = gl_sta_ssid;
            info.sta_ssid_len = gl_sta_ssid_len;
            esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_SUCCESS, softap_get_current_connection_number(), &info);
        } else {
            esp_blufi_send_wifi_conn_report(mode, ESP_BLUFI_STA_CONN_FAIL, softap_get_current_connection_number(), NULL);
        }
        BLUFI_INFO("BLUFI get wifi status from AP\n");

        break;
    }
    case ESP_BLUFI_EVENT_RECV_SLAVE_DISCONNECT_BLE:
        BLUFI_INFO("blufi close a gatt connection");
        esp_blufi_disconnect();
        break;
    case ESP_BLUFI_EVENT_DEAUTHENTICATE_STA:
        /* TODO */
        break;
	case ESP_BLUFI_EVENT_RECV_STA_BSSID:
        memcpy(sta_config.sta.bssid, param->sta_bssid.bssid, 6);
        sta_config.sta.bssid_set = 1;
        esp_wifi_set_config(WIFI_IF_STA, &sta_config);
        BLUFI_INFO("Recv STA BSSID %s\n", sta_config.sta.ssid);
        break;
	case ESP_BLUFI_EVENT_RECV_STA_SSID:
        strncpy((char *)sta_config.sta.ssid, (char *)param->sta_ssid.ssid, param->sta_ssid.ssid_len);
        sta_config.sta.ssid[param->sta_ssid.ssid_len] = '\0';
        esp_wifi_set_config(WIFI_IF_STA, &sta_config);
        BLUFI_INFO("Recv STA SSID %s\n", sta_config.sta.ssid);
        break;
	case ESP_BLUFI_EVENT_RECV_STA_PASSWD:
        strncpy((char *)sta_config.sta.password, (char *)param->sta_passwd.passwd, param->sta_passwd.passwd_len);
        sta_config.sta.password[param->sta_passwd.passwd_len] = '\0';
        esp_wifi_set_config(WIFI_IF_STA, &sta_config);
        BLUFI_INFO("Recv STA PASSWORD %s\n", sta_config.sta.password);
        break;
	case ESP_BLUFI_EVENT_RECV_SOFTAP_SSID:
        strncpy((char *)ap_config.ap.ssid, (char *)param->softap_ssid.ssid, param->softap_ssid.ssid_len);
        ap_config.ap.ssid[param->softap_ssid.ssid_len] = '\0';
        ap_config.ap.ssid_len = param->softap_ssid.ssid_len;
        esp_wifi_set_config(WIFI_IF_AP, &ap_config);
        BLUFI_INFO("Recv SOFTAP SSID %s, ssid len %d\n", ap_config.ap.ssid, ap_config.ap.ssid_len);
        break;
	case ESP_BLUFI_EVENT_RECV_SOFTAP_PASSWD:
        strncpy((char *)ap_config.ap.password, (char *)param->softap_passwd.passwd, param->softap_passwd.passwd_len);
        ap_config.ap.password[param->softap_passwd.passwd_len] = '\0';
        esp_wifi_set_config(WIFI_IF_AP, &ap_config);
        BLUFI_INFO("Recv SOFTAP PASSWORD %s len = %d\n", ap_config.ap.password, param->softap_passwd.passwd_len);
        break;
	case ESP_BLUFI_EVENT_RECV_SOFTAP_MAX_CONN_NUM:
        if (param->softap_max_conn_num.max_conn_num > 4) {
            return;
        }
        ap_config.ap.max_connection = param->softap_max_conn_num.max_conn_num;
        esp_wifi_set_config(WIFI_IF_AP, &ap_config);
        BLUFI_INFO("Recv SOFTAP MAX CONN NUM %d\n", ap_config.ap.max_connection);
        break;
	case ESP_BLUFI_EVENT_RECV_SOFTAP_AUTH_MODE:
        if (param->softap_auth_mode.auth_mode >= WIFI_AUTH_MAX) {
            return;
        }
        ap_config.ap.authmode = param->softap_auth_mode.auth_mode;
        esp_wifi_set_config(WIFI_IF_AP, &ap_config);
        BLUFI_INFO("Recv SOFTAP AUTH MODE %d\n", ap_config.ap.authmode);
        break;
	case ESP_BLUFI_EVENT_RECV_SOFTAP_CHANNEL:
        if (param->softap_channel.channel > 13) {
            return;
        }
        ap_config.ap.channel = param->softap_channel.channel;
        esp_wifi_set_config(WIFI_IF_AP, &ap_config);
        BLUFI_INFO("Recv SOFTAP CHANNEL %d\n", ap_config.ap.channel);
        break;
    case ESP_BLUFI_EVENT_GET_WIFI_LIST:{
        wifi_scan_config_t scanConf = {
            .ssid = NULL,
            .bssid = NULL,
            .channel = 0,
            .show_hidden = false
        };
        esp_wifi_scan_start(&scanConf, true);
        break;
    }
    case ESP_BLUFI_EVENT_RECV_CUSTOM_DATA:
        BLUFI_INFO("Recv Custom Data %d\n", param->custom_data.data_len);
        esp_log_buffer_hex("Custom Data", param->custom_data.data, param->custom_data.data_len);
        break;
	case ESP_BLUFI_EVENT_RECV_USERNAME:
        /* Not handle currently */
        break;
	case ESP_BLUFI_EVENT_RECV_CA_CERT:
        /* Not handle currently */
        break;
	case ESP_BLUFI_EVENT_RECV_CLIENT_CERT:
        /* Not handle currently */
        break;
	case ESP_BLUFI_EVENT_RECV_SERVER_CERT:
        /* Not handle currently */
        break;
	case ESP_BLUFI_EVENT_RECV_CLIENT_PRIV_KEY:
        /* Not handle currently */
        break;;
	case ESP_BLUFI_EVENT_RECV_SERVER_PRIV_KEY:
        /* Not handle currently */
        break;
    default:
        break;
    }
}

void app_main(void)
{
    esp_err_t ret;

    // Initialize NVS
    ret = nvs_flash_init();
    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
        ESP_ERROR_CHECK(nvs_flash_erase());
        ret = nvs_flash_init();
    }
    ESP_ERROR_CHECK( ret );

    initialise_wifi();

    ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT));

    esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
    ret = esp_bt_controller_init(&bt_cfg);
    if (ret) {
        BLUFI_ERROR("%s initialize bt controller failed: %s\n", __func__, esp_err_to_name(ret));
    }

    ret = esp_bt_controller_enable(ESP_BT_MODE_BLE);
    if (ret) {
        BLUFI_ERROR("%s enable bt controller failed: %s\n", __func__, esp_err_to_name(ret));
        return;
    }

    ret = esp_blufi_host_and_cb_init(&example_callbacks);
    if (ret) {
        BLUFI_ERROR("%s initialise failed: %s\n", __func__, esp_err_to_name(ret));
        return;
    }

    BLUFI_INFO("BLUFI VERSION %04x\n", esp_blufi_get_version());
}